pvc test conditions

pvc test conditions, Total:164 items.

The international standard classification for "pvc test conditions" includes: Special measuring equipment for use in telecommunications , Other standards related to optics and optical measurements , Fire-protection .

The Chinese standard classification for "pvc test conditions" includes: Universal electronic measuring instrument, equipment and system , Optical testing instrument , Fire-fighting equipment and devices , Technical Management , Technical management .

Group Standards of the People's Republic of China

T/QGCML 4204-2024 Technical specifications of auxiliary device for PVC sealant detection

Anhui Provincial Standard of the People's Republic of China

DB34/T 1295-2017 General Technical Specifications for Recycled Polyvinyl Chloride (PVC-RC)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14075-2008 Specifications for optical fibre chromatic dispersion measuring set
GB/T 11793.2-1989 Technical requirements on mechanical and weathering properties for PVC windows
GB/T 9039-1988 Technical condition for transmission measuring set 10kHz to 18. 6MHz

Professional Standard - Public Safety Standards

GA 305-2001 General specifications for plain conduits of flame-retardant PVC plastics for electrical installations

Ministry of Emergency Management of the People's Republic of china

XF 305-2001 General specifications for plain conduits of flame retardant PVC plastics for electrical installations

Professional Standard - Electron

SJ 419-1973 Measurement conditions for low noise travelling wave tubes
SJ 442-1973 Measurement conditions for high-voltage rectifier tubes
SJ 1705-1981 Measurement conditions of power klystrons
SJ 362-1973 Measurement conditions for reflex klystrons
SJ 1871-1981 Measurement conditions for gas laser devices
SJ 430-1973 Measurement conditions for O-type backward-wave tubes

Professional Standard - Post and Telecommunication

YD/T 619-1993 Technical requirements of 34368Kbit/s error tester
YD/T 505-1991 Technical conditions for 10kHz - 100MHz transmission tester
YD/T 758-1995 Technical conditions of line signal testers
YD/T 618-1993 Technical requirements of 139 264kbit/s error tester
YD/T 596-1992 Technical conditions of white noise test sets

Professional Standard - Light Industry

QB/T 5080-2017 Specificiation for color co-extrusion materials for unplasticized polyvinyl chloride (PVC-U) profiles
QB/T 5079-2017 Technical specificiation for chlorinated polyethylene for unplasticized polyvinyl chloride(PVC-U) profiles
QB/T 5081-2017 Specificiation of thermostabilizer for unplasticized polyvinyl chloride(PVC-U) profiles
QB/T 5078-2017 Special processing aid technical conditions for unplasticized polyvinyl chloride (PVC-U) profile

未注明发布机构

DVS 2216-3 Beiblatt 1:2018-01 Ultrasonic welding specimens and their test conditions

German Institute for Standardization

DIN 19531:1968 Technical requirements for PVC rigid pipes and accessories
DIN EN ISO 2507 E:2025-03 Draft Document - Thermoplastics pipes and fittings - Vicat softening temperature: General test method and test conditions for Vinyl chloride - based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile - based (ABS, ASA) pipes and fittings (ISO/DIS 2507:2025); Ger...
DIN EN 607:2024 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
DIN 16959:1973 Sheets of plasticized polyvinylchlorid (PVC); technical delivery specifications
DIN EN 607 E:2021 Draft Document – Eaves gutters and fittings made of PVC-U – Definitions, requirements and testing; German and English version prEN 607:2021
DIN EN 607:2005-02 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing; German version EN 607:2004 / Note: To be replaced by DIN EN 607 (2021-08).
DIN EN 607:2021-08 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing; German and English version prEN 607:2021 / Note: Date of issue 2021-07-09*Intended as replacement for DIN EN 607 (2005-02).
DIN EN 607:2024-04 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing; German version EN 607:2023
DIN EN 607:1995 Eaves gutters and fittings made PVC-U — Definitions, requirements and testing
DIN 3441-4:1978 Fittings made of hard PVC (hard polyvinyl chloride); Requirements and testing
DIN 16875:1998 Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for ducting - Dimensions and technical delivery conditions
DIN EN ISO 2507-2 E:2017 Draft Document - Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly...
DIN 16875:2013-03 Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for ducting - Dimensions and technical delivery conditions / Note: To be replaced by DIN 16875 (2018-11).
DIN 16875:2018-11 Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) for ducting - Dimensions and technical delivery conditions / Note: Date of issue 2018-09-28*Intended as replacement for DIN 16875 (2013-03).
DIN 53286:1968 Testing conditions for metal adhesives and their metal bonded joints Testing conditions at different temperatures
DIN 8062:1974 Unplasticized polyvinyl chloride (PVC-U, PVC-HI) pipes; dimensions
DIN 685-100 E:2017-05 Round steel link chains, components and accessories, tested - Part 100: Additional terms
DIN 685-100 E:2020-03 Round steel link chains, components and accessories, tested - Part 100: Additional terms
DIN 685-100:2022 Round steel link chains, components and accessories, tested - Part 100: Additional terms; Text in German and English
DIN 8080 Beiblatt 1:2000-08 Chlorinated polyvinyl chloride (PVC-C) pipes, PVC-C 250 - General quality requirements and testing; chemical resistance
DIN EN IEC 62052-11:2023-06*VDE 0418-2-11:2023-06 Electricity metering equipment – General requirements, tests and test conditions
DIN EN 12842:2012-11 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods; German version EN 12842:2012

AT-ON

ONORM E 6530-1993 Cable cover plates of PVC-U or PE-HD-Dimensions, technical terms of delivery, tests and marking of conformity
OENORM EN 607-2021 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
ONORM B 5182-1987 Pipes and pipes with spigot ends of unplasticized Polyvinylchloride (PVC-U) for water supply; dimensions, technical terms of delivery, tests and marking of conformity
ONORM B 5182/A1-2000 Pipes and pipes with spigot ends of unplasticized polyvinylchloride (PVC-U) for water supply - Dimensions, technical terms of delivery, tests and marking of conformity (Amendment)
ONORM B 5191-1990 Buried pipes of high impact Polyvinylchloride (PVC-HI),fittings of unplastizised Polyvinylchloride (PVC-U or PVC-HI) andjointsfor the transport ofgaseous fuels;dimensions, requirements, tests, marking ofconformity

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 1462.20:1996 Methods of test for PVC pipes and fittings - Method for the determination of long-term failure stress of PVC moulding compounds
AS/NZS 1462.15:1996 Methods of test for PVC pipes and fittings - Method for determination of vinyl chloride monomer content
AS/NZS 1462.19:2006 Methods of test for plastics pipes and fittings - C-ring test for fracture toughness of PVC pipes
AS/NZS 1462.11:1996 Methods of test for PVC pipes and fittings - Method for high temperature stress-relief testing of fittings

British Standards Institution (BSI)

25/30487778 DC BS EN ISO 2507 Thermoplastics pipes and fittings — Vicat softening temperature: General test method and test conditions for Vinyl chloride. based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile. based (ABS, ASA) pipes and fittings
BS EN ISO 2507-2:2017(2018) Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (P
BS EN 607:2004(2005) Eaves gutters and fittings made of PVC - U — Definitions, requirements and testing
BS DD ENV 13066:1998 Bar coding. Test specifications for bar code production software
BS EN 607:2023 Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
BS EN 607:1996 Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
BS EN 607:2004 Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
BS EN 26599-1:1993 Packaging. Sacks. Conditioning for testing.. Paper sacks
BS EN 607:2005 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
BS EN 441-4:1995 Refrigerated display cabinets - General test conditions
BS 6811-2-2.1:1987 Winding wires. Methods of test-General test conditions and schedule of tests
BS ISO 6779:2023 Test conditions for vertical internal type broaching machines. Testing of accuracy
BS ISO 6480:2019 Test conditions for horizontal internal type broaching machines. Testing of accuracy

Standards Norway

NS-EN 607:2023 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
NS-EN 607:2004 Eaves gutters and fittings made of PVC-U — Definitions, requirements and testing
NS-EN 607:1995 Eaves gutters and fittings made from PVC-U — Definitions, requirements and testing
NS 5654-1980 Test conditions for standard lathes - Testing of the accuracy
NS 5655-1980 Test conditions for precision lathes - Testing of accuracy
NS 927:1968 Polyvinyl chloride pipes without plasticizer (PVC pipes) — Test methods
NS 5655:1980 Test conditions for precision lathes — Testing of accuracy (ISO 1708:1979)
NS-EN 12842:2012 Ductile iron fittings for PVC-U or PE piping systems — Requirements and test methods

Ente Nazionale Italiano di Unificazione

UNI EN 607:2023 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
UNI 9358:1988 Packaging. Paper bags. Conditioning for tests
UNI 8820:1986 Testing conditions for machine tools. Centreless grinding machines.
UNI EN ISO 139:2011 Textiles - Standard atmospheres for conditioning and testing
UNI EN 607:2005 Eaves gutters and fittings made of PVC- U - Definitions, requirements and testing
UNI EN ISO 2507-2:2018 Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride...

Association Francaise de Normalisation

NF EN 607:2023 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
NF EN 607:2005 Gouttières pendantes et leurs raccords en PVC-U - Définitions, exigences et méthodes d'essai
XP C93-539:2016 Test on fire-resistant optical fibre cables under fire conditions
NF X15-015:1973 MEASUREMENT OF RELATIVE HUMIDITY BY MEANS OF ELECTROLYTIC HYGROMETERS.
NF T54-024-2*NF EN ISO 2507-2:2017 Thermoplastics pipes and fittings - Vicat softening temperature - Part 2 : test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 8361-2:2007 Thermoplastics pipes and fittings – Water absorption – Part 2: Test conditions for unplasticized poly (vinyl chloride) (PVC-U) pipes and fittings
OS GSO IEC 60189-1:2010 Low frequency cables and wires with PVC nsulation and PVC sheath - Part 1: General test and measuring methods.

SE-SIS

SIS SMS 2528-1967 Pl astiv. pipes. Pipes and f ittings oj unplaslicized PVC for waste water. Testing
SIS SMS 2519-1967 Plastic pipes. Pipes and fittings of unplasticized PVC for waste water. General technical requirements
SIS 11 21 19 E-1963 Dragprovstavar typ J
SIS 02 01 21-1968 Atmospheric conditions and time for testing
SIS SS-ISO 1708:1986 Test conditions for general purpose parallel lathes-Testing of the accuracy

Swedish Institute for Standards

SS-EN 607:1995 Eaves gutters and fittings made from PVC-U - Definition, requirements and testing
SS-EN 607:2004 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
SS-EN 607:2023 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
ISO 8361-2 Thermoplastics pipes and fittings - Water absorption - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
SS-EN ISO 2507-2:2017 Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride)...
SS-ISO 3604:1982 Fitting for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints - Pressure test for leakproofness under conditions of external hydraulic pressure
SS-ISO 4008-1:1983 Road vehicles - Fuel injection pumps - Conditionsfor testing

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0281-107-1990*DIN VDE 0281-107:1990 Cold-resistant PVC-insulated power cables

IN-BIS

IS 196-1966 Test atmospheric conditions
IS 7252-1974 Cold Storage Physical Condition Testing Guide

American Society for Testing and Materials (ASTM)

ASTM D2383-09 Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
ASTM D2383-14 Standard Practice for Testing Plasticizer Compatibility in Poly40;Vinyl Chloride41; 40;PVC41; Compounds Under Humid Conditions

Spanish Association for Standardization (UNE)

AENOR UNE-EN ISO 2507-2:2018 Tubes and accessories in thermoplastic materials. Vicat softening temperature. Part 2: Test conditions for unplasticized polyvinyl chloride (PVC-U) or chlorinated polyvinyl chloride (PVC-C) pipes and fittings and for ...
UNE-EN 607:2006 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
UNE-EN 607:2023 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
UNE-EN 607:1996 EAVES GUTTERS AND FITTINGS MADE OF PVC-U. DEFINITIONS, REQUIREMENTS AND TESTING
AENOR UNE 21355:1977 NORMAL ATMOSPHERIC CONDITIONS FOR TESTS AND MEASUREMENTS
AENOR UNE 56772:1992 Slatted boards. Determination of the dimensions of the test pieces.
AENOR UNE-EN 12842:2013 Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods

International Association of Plumbing and Mechanical Officials

IAPMO IGC 224-2018 ABS, PVC and Cast Iron DWV Test Fitting with Integral Cleanout
IAPMO IGC 122-2019 Test Caps and Test Gates with ABS or PVC Housings
IAPMO IGC 173-2002(R2013) PVC-DWV Fire Stop Fittings

Korean Agency for Technology and Standards (KATS)

KS M ISO 2507-2-2005(2020) Thermoplastics pipes and fittings－Vicat softening temperature?Part 2：Test conditions for unplasticized poly(vinyl chloride)(PVC－U) or chlorinated poly(vinyl chloride)(PVC－C) pipes and fittings for hig
KS M ISO 2507-2:2005 Thermoplastics pipes and fittings－Vicat softening temperature ? Part 2：Test conditions for unplasticized poly(vinyl chloride)(PVC－U) or chlorinated poly(vinyl chloride)(PVC－C) pipes and fittings for high impact resistance poly(vinyl chloride)(PVC－HI) pipe
KS A 1545-2004 Conditioning of packaged freights test
KS A 0006-2024 Standard atmospheric conditions for testing
KS A 0006-2019 Standard atmospheric conditions for testing
KS A 0006-2014(2019) Standard atmospheric conditions for testing

Bureau of Indian Standards

IS 196-2024 Atmospheric Conditions for Testing
IS B196-1966 Atmospheric Conditions for Testing (Revised)(BI-LINGUAL)
IS 17250-2019 Test Conditions for Wire Electrical- Discharge Machines ( Wire EDM ) — Testing of the Accuracy

International Organization for Standardization (ISO)

ISO 3604:1976 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints; Pressure test for leakproofness under conditions of external hydraulic pressure
ISO 2507-2:1995 Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PV
ISO 8361-2:1991 Thermoplastics pipes and fittings; water absorption; part 2: test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings

VN-TCVN

TCVN 6147-2-2003 Thermoplastics pipes and fittings.Vicat softening temperature.Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC.C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC.HI
TCVN 6041-1995 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints.Pressure test for leakproofness under conditions of external hydraulic pressure

Danish Standards Foundation

DANSK DS/EN 607:2005 Eaves gutters and fittings made of PVC-U – Definitions, requirements and testing
DS/EN 607:2005 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
DS/EN 20187:1993 Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples

European Committee for Standardization (CEN)

EN ISO 2507-2:2017 Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (P
prEN 607-2021 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing

CZ-CSN

CSN 34 7010 Cast.62-1972 Heat shook te3t of PVC coverings
CSN 34 7010 Cast.63-1972 Shrinkage test of PVC and PE insulation
CSN 34 7010 Cast.63-1987 Shrinkage test of PVC and PE insulation
CSN 50 0303-1978 Paper testing —Methoil for conditioning f páper and board est samples
CSN 34 7010 Cast.61-1972 Pressure test of PVC coverings at high temperature
CSN 37 0050-1973 Installation material for internal wiring. PVC terminal strips and accossories for electric installations
CSN 64 5401-1974 Testing of cellular materials. General conditions for testing of cellular materials

NL-NEN

NEN 7011-1988 Gutters and accessories made of unplasticized PVC (PVC-U) and accessory brackets Requirements and test methods

RO-ASRO

STAS SR ISO 2419:1996 Leather - Conditioning of test pieces for physical tests
STAS SR ISO 3048:1996 Gypsum plasters - General test conditions
STAS 10060-1975 ELECTRON 1C MEASURING INSTRUMENTS Environmental test conditions
STAS 8297/4-1981 HOUSEHOLD SEWING MACHINES General test conditions

Lithuanian Standards Office

LST EN 607-2005 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing

GM Holden Ltd

HOLDEN HN 1670-2008 PAINT SYSTEMS FOR EXTERIOR PVC MOULDINGS
HOLDEN HN 2495-2012 PVC Carrier for Bright Belt Line Mouldings

Indonesia Standards

SNI 12-1548-1989 PVC moulding boots, oil and fat proof

American National Standards Institute （ANSI)

ANSI/ATIS 0600020.a-2012 Pb-Free Circuit Pack Testing Waive Conditions

Association of German Mechanical Engineers

VDI/VDE 2631 Blatt 9-2002 Form measurement - Exemples for measurement and analysis conditions

South African Bureau of Standard

SANS 5807:1979 Pesticides: Test rooms, test conditions, test equipment, and test insects and their handling

GCC Standardization Organization

GSO ISO 9853:2008 Injection-moulded unplasticized poly(vinyl chloride) (PVC-U)fittings for pressure pipe systems -Crushing test
GSO ISO 10791-7:2013 Test conditions for machining centres -- Part 7: Accuracy of a finished test piece

YU-JUS

JUS N.C0.030-1980 Testing offlacible cords and cables. General testing conditions
JUS N.R7.065-1980 Printe? boards. Test methods. Environmented conditioning

Standard Association of Australia （SAA）

AS 1731.4:2003/Amdt 1:2005 General test conditions for refrigerated display cabinets
AS 1731.4:2003(R2013) General test conditions for refrigerated display cabinets