6-well and 12-well plates

6-well and 12-well plates, Total:492 items.

The international standard classification for "6-well and 12-well plates" includes: Equipment for processing of minerals , Particle size analysis. sieving , Concrete and concrete products , Agricultural machines, implements and equipment , Equipment for the chemical industry , Cement. Gypsum. Lime. Mortar , Products in fibre-reinforced cement , Other textile machinery .

The Chinese standard classification for "6-well and 12-well plates" includes: Sieving, Sieve Plate and Sieve Screen , Paper pulp and paperboard , Concrete product , Technical management , Combination grippers , Moulds , Special equipment for aircraft manufacturing , Saw timber, artificial board machinery and tools , Screening equipment , Hydraulic and pneumatic device , Sealing and sealing device , Electrical energy storage device , Chemical equipment , Gypsum product , Chemical fiber machinery and instrument .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 28-1988 Hexagon fit bolts with Split pin hole on shank; Product grade A and B
GB/T 6005-2008 Test sieves - Metal wire cloth perforated metal plate and electroformed sheet - Nominal sizes of openings
GB/T 19360-2004 Industrial plate screens—Specifications and test methods
GB/T 12620-2008 Round and elongated apertures with round and square plate screens
GB/T 6003.2-1997 Test sieves of perforated metal plate
GB/T 10061-2008 Screen plants - Codification for designating perforations
GB/T 6005-1997 Test sieves-Metal wire cloth, perforated metal plate and electroformed sheet-Nominal sizes of opening
GB/T 12620-1990 Slots with round end and slots with square end plate screens
GB/T 10061-1988 Screen plants--Codification for designating perforations
GB 12987-1997 Concrete hollow floor slab for rural horses
GB 12987-1991 Concrete hollow floor slab for rural houses
GB/T 10612-2003 Industrial plate screens - Thickness below 3 mm - Round and square holes
GB/T 2679.14-1996 Filter paper and filterboard--Determination of maximum pore diameter
GB/T 10613-2003 Industrial plate screens—Thickness of 3 mm and above—Round and square holes

Professional Standard - Electron

SJ/T 11660-2016 Backing plate for drilling holes in printed boards
SJ/T 11641-2016 Entry board for printed circuit board drilling
SJ 3020.16-1988 Combined dies - Press stripper plate (square)
SJ 3020.15-1988 Combined dies - Press stripper plate(square)
SJ/Z 21087-2016 Guide for drilling processing of printed circuit boards

Group Standards of the People's Republic of China

T/HNNMIA 60-2023 Aluminum alloy plate for printed circuit drilling cover
T/CSTE 0527-2024 Microporous ceramic acoustic barrier panel
T/KSMA 001-2019 Piercing Punches of Stamping Dies for Thick Plate
T/CPCA 6042-2016 Silver through-hole printed circuit board
T/CPCA 4403-2010 Backup board for printed circuit board drilling
T/CPCA 6042A-2023 Silver pasted through-hole printed circuit board
T/SZAS 75-2023 Performance verification of microplate sealing film
T/SZAS 41-2021 Performance verification of deep well plate
T/CASME 535-2023 Cell culture microtiter plate
T/CPCA 4402-2010 Entry board for printed circuit board drilling

Professional Standard - Aviation

HB 4530.16-1991 H-type hole combination fixture pressure plate type piece pressure plate support
HB 409-1971 Rotating platen with screw holes
HB 4528.14-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Full Group Hole Conversion Boards
HB 4530.7-1991 Pieces of H-shaped Hole-system Modular Fixture Clamp Plates - Elbow Clamp Plates
HB 4528.12-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Single-semigroup Hole Conversion Boards
HB 3829-1986 Anchor locknut rivet hole drilling jig
HB 1873-1971 Rotating platen with screw holes
HB 4530.17-1991 H-type hole combination fixture press plate type hinge press plate
HB 4023-1988 Eccentric Hole Lower Baseplate
HB 3955-1987 Side-hole Position Plate
HB 1291-1987 Countersunk Drill Template
HB 1410-1987 Side-hole Position Plate
HB 4307-1989 Round Hole Supporting Guide Plate
HB 4528.13-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Double-semigroup Hole Conversion Boards
HB 1411-1987 Large Middle Hole Back Plate
HB 4529.3-1991 Locating Pieces of H-shaped Hole-system Modular Fixture - Coordinate Adjustment Plate with Single Group of Holes
HB 4528.11-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Three-hole Conversion Boards
HB 4530.6-1991 Pieces of H-shaped Hole-system Modular Fixture Clamp Plates - Elbow Clamp Plates
HB 4513-1991 Rectangular Plate (For Scribing and Drilling Table )
HB 4530.15-1991 H-type hole combination fixture pressure plate type piece pressure plate support
HB 4528.9-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Single Bolt Hole Conversion Boards
HB 4530.9-1991 H-type hole combination clamp platen U-shaped platen
HB 4022-1988 Round Hole Lower Baseplate
HB 4530.8-1991 H-shaped Hole-system Modular Fixture Clamp Plates - U-shaped Clamp Plates
HB 4530.10-1991 H-type hole combination clamp platen U-shaped platen
HB 1564-1987 Large Middle Hole Back Plate
HB 3961-1987 Countersunk Drill Template
HB 4530.20-1991 H-type hole combination clamp platen fork platen
HB 4530.5-1991 Pieces of H-shaped Hole-system Modular Fixture Clamp Plates - Flat Clamp Plates
HB 4530.18-1991 H-type hole combination clamp platen swing platen
HB 1555-1987 Back Plate with Middle Hole
HB 4310-1989 Rectangular Hole Back-up Board
HB 1872-1971 Mobile platen with screw holes
HB 1268-1987 Back Plate with Middle Hole
HB 1477-1987 Countersunk Drill Template
HB 1563-1987 Large Middle Hole Position Plate
HB 4530.4-1991 Pieces of H-shaped Hole-system Modular Fixture Clamp Plates - Flat Clamp Plates
HB 4309-1989 Square Hole Back-up Board
HB 407-1971 Mobile platen with screw holes
HB 1471-1987 Middle Hole Position Plate
HB 4535.21-1991 K Type Hole Series Combined Clamp Elements - Square Back-up Board for Transition of Holes and Grooves
HB 4304-1989 Round Hole Male and Female Die Back Plates
HB 4530.19-1991 H-type hole combination clamp platen fork platen
HB 4528.10-1991 Basic Parts of H-shaped Hole-system Modular Fixture - Single-hole Conversion Boards

Professional Standard - Forestry

LY/T 1361-1999 Single-board Dibber
LY/T 1579-2000 Gummed tape with holes used for jointing edges of inner veneers

Professional Standard - Machinery

JB/T 7252-1994 Valve Type Orifice Plate Throttling Devices
JB/T 13741-2019 Orifice plate type bar screen
JB/T 14241-2022 Integral valve orifice flowmeter
JB/T 9031-1999 Perforated screen plate for ore
JB/T 7630.2-1998 Microglass rubber separator for lead acid storage batteries
JB/T 6187.6-1992 16mm groove system combination fixture guide countersink hole drilling template
JB/T 6634-1993 Orifice Plates Intended to Be Used in Mechanical Sealing Systems
JB/T 7252-2018 orifice throttling device

Professional Standard-Ships

CB/T 4366-2014 A type orifice flanges

Taiwan Provincial Standard of the People's Republic of China

CNS 11484-1986 Method of Test for Puncture of Paperboard and Corrugated Fiberboard
CNS 10211-1983 Perforated Asbestos Cement Flat Sheets for Acoustic Use
CNS 310-1953 Tap for Whitworth Pipe Threading Dies
CNS 4965-1998 Perforated Gypsum Boards for Acoustic Use
CNS 9957-1983 Perforated Aluminium Panel for Acoustic Use

Professional Standard - Chemical Industry

HG/T 21529-2005 Hand hole plate flat welding flange
HG/T 21529-2014 Plate flange handholes
HG 21529-1995 Plate type flat welding flange hand hole
HG/T 21559.2-2005 Stainless steel perforated plate corrugated packing standard
HG/T 21559.1-1995 Stainless steel netted plat corrugated packing
HG/T 21529-2005（编制说明） Plate type flat welding flange hand hole
HG/T 21516-2014 Plate flange manholes with hinged cover

Professional Standard - Building Materials

JC/T 566-2022 Perforated fiber-cement sheet for absorbing sound
JC/T 2685-2022 Porous ceramic plate for pneumatic conveying
JC/T 566-2008 Perforated fiber-cement sheet for absorbing sound
JC/T 803-1989 Perforated gypsum boards for acoustic use
JC/T 803-2007 Perforated gypsum board for acoustic use

Professional Standard - Aerospace

QJ 350-1978 Carbide reaming drill for through hole (D=12~32)
QJ 348-1978 Taper Shank Reaming Drill for Blind Hole (D=12~32)
QJ 1209-1987 Technical Specification for Metallized Holes of Printed Boards
QJ 344-1978 Taper shank reaming drill for through hole (D=12~32)
QJ 1962.7-1990 Simple universal punching molded plate

Professional Standard - Textile

FZ/T 92038-2023 Round hole spinneret for melt spinning
FZ/T 92038-1995 Melt spinning circular hole spinneret
FZ/T 92043-1995 Melt spinning profile hole spinneret
FZ/T 92043-2023 Melt spinning special hole spinneret

Professional Standard - Light Industry

QB/T 5490-2020 Microcellular polypropylene foam sheet and board

Professional Standard - Energy

NB/T 20424-2017 Set requirement for flow restrictors in nuclear power plant

Engineering Sciences Data Unit (ESDU)

ESDU 81039 B-1985 FLOW OF LIQUIDS Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
ESDU 81039 C-2007 Flow of liquids. Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts.
ESDU 82009 C-1993 COMPRESSIBLE FLOW OF GASES Pressure losses across orifice plates@ perforated plates and thick orifice plates in ducts
ESDU 82009 D-2007 Compressible flow of gases. Pressure losses and discharge coefficients of orifice plates@ perforated plates and thick orifice plates in ducts.

Society of Automotive Engineers (SAE)

SAE AS9527C SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD,.1380-40 UNJF-3A
SAE AS9527B SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD,.1380-40 UNJF-3A
SAE AS9529A Bolt, Machine - Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.1900-32 UNJF-3A
SAE AS9529C BOLT, MACHINE - STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A
SAE AS9527A Screw, Machine Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.1380-40 UNJF-3A
SAE AS9527 Screw, Machine Steel Ams 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.138-40 Unjf-3a
SAE AS9529 Bolt, Machine - Steel Ams 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.190-32 Unjf-3a
SAE AS9528C-2022 SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, .1640-36 UNJF-3A
SAE AS9531-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .3125-24 UNJF-3A
SAE AS9527B-2016 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1380-40 UNJF-3A
SAE AS9530 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.250-28 UNJF-3A
SAE AS9534 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.500-20 UNJF-3A
SAE AS9531 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.3125-24 UNJF-3A
SAE AS9532 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.375-24 UNJF-3A
SAE AS9528 Screw, Machine Steel Ams 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.164-36 Unjf-3a
SAE AS9532-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .375-24 UNJF-3A
SAE AS9527-2000 Screw@ Machine Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .138-40 UNJF-3A
SAE AS9533 Bolt, Machine - Steel, AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.4375-20 UNJF-3A
SAE AS9530-1998 Bolt, Machine - Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .250-28 UNFJ-3A
SAE AS9527A-2007 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1380-40 UNJF-3A
SAE AS9529B BOLT, MACHINE – STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A
SAE AS9534-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .500-20 UNJF-3A
SAE AS9528-2000 Screw, Machine Steel AMS 6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .164-36 UNJF-3A
SAE AS9533-1998 Bolt@ Machine - Steel AMS 6322@ Cadmium Plate@ Drilled@ 1 Hole@ Hexagon Head@ .4375-20 UNJF-3A
SAE AS9528B-2016 SCREW@ MACHINE STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .164-36 UNJF-3A
SAE AS9531-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .3125-24 UNJF-3A
SAE AS9532-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .375-24 UNJF-3A
SAE AS9527-2004 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .138-40 UNJF-3A
SAE AS9534-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .500-20 UNJF-3A
SAE AS9528-2004 SCREW, MACHINE STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .164-36 UNJF-3A
SAE AS9527C-2022 SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A
SAE AS9533-2006 BOLT, MACHINE - STEEL, AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .4375-20 UNJF-3A
SAE AS9529B-2016 BOLT@ MACHINE - STEEL UNS G87400@ CADMIUM PLATE@ DRILLED@ 1 HOLE@ HEXAGON HEAD@ .1900-32 UNJF-3A
SAE AS9529C-2022 BOLT, MACHINE - STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A
SAE AS91001C Nut, Hexagon, Drilled, Boss Connection, Cres - UNS S30400
SAE AS91001A Nut - Hexagon, Drilled, Boss Connection, Cres - Uns S30400
SAE AS91001D Nut, Hexagon, Drilled, Boss Connection, Cres - UNS S30400
SAE AS9530-2006 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .250-28 UNJF-3A
SAE AS9529-2004 BOLT, MACHINE - STEEL AMS 6322, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .190-32 UNJF-3A
SAE AS91001B Nut, Hexagon, Drilled, Boss Connection, Cres - UNS S30400
SAE AS91001E NUT, HEXAGON, DRILLED, BOSS, CONNECTION, CRES - UNS S30400
SAE AS9529A-2007 BOLT, MACHINE - STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1900-32 UNJF-3A
SAE AS9686 Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel Ams 6304, Diffused Nickel Cadmium Plate,.250-28 Unjf-3a
SAE AS9687-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .3125-24 UNJF-3A
SAE AS9685-2000 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .190-32 UNJF-3A
SAE AS9686-1998 Bolt@ Machine - Hexagon Head@ Drilled@ 1 Hole@ PD Shank@ Steel AMS 6304@ Diffused Nickel Cadmium Plate@ .250-28 UNJF-3A
SAE AS9687 Bolt, Machine - Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel Ams 6304, Diffused Nickel Cadmium Plate,.3125-24 Unfj-3a
SAE AS9685 Bolt, Machine-Hexagon Head, Drilled, 1 Hole, Pd Shank, Steel Ams 6304, Diffused Nickel Cadmium Plate,.190-32 Unjf-3a
SAE AMS2407E-1985 Plating, Chromium, Porous
SAE AS9686A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min,.2500-28 UNJF-3A
SAE AS9687A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9685A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9685D-2023 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9685C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
SAE AS9686C BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.2500-28 UNJF-3A
SAE AS9685A-2003 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE MA3304-1987 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE AS9686A-2007 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE AS9686C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .2500-28 UNJF-3A
SAE MA3304A-2006 BOLT-MACHINE, HEX HEAD, DRILLED, PD SHANK, MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
SAE MA3304A-1996 Bolt-Machine@ Hex Head@ Drilled@ PD Shank@ MJ Thread@ AMS 6322@ Cadmium Plate@ Metric
SAE AS9687C-2022 BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .3125-24 UNJF-3A
SAE AS9685B-2016 BOLT@ MACHINE - HEXAGON HEAD@ DRILLED@ 1 HOLE@ PD SHANK@ STEEL@ UNS K14675@ DIFFUSED NICKELCADMIUM PLATE@ 195 KSI MIN@ .1900-32 UNJF-3A
SAE AS9685C BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.1900-32 UNJF-3A
SAE AS9687C BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.3125-24 UNJF-3A
SAE AS9687B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.3125-24 UNJF-3A
SAE AS9685A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min,.1900-32 UNJF-3A
SAE AS9685D BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.1900-32 UNJF-3A
SAE AS9685B BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.1900-32 UNJF-3A
SAE AS9686B BOLT, MACHINE – HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN,.2500-28 UNJF-3A
SAE AS9687A Bolt, Machine - Hexagon Head, Drilled, 1 Hole, PD Shank, Steel, UNS K14675, Diffused Nickel-Cadmium Plate, 195 ksi min,.3125-24 UNJF-3A
SAE MA3304B BOLT-MACHINE, HEX HEAD, DRILLED, PD SHANK, MJ THREAD, AMS 6322, CADMIUM PLATE, METRIC
SAE MA3304 Bolt-Machine, Hex Head, Drilled, PD Shank, MJ Thread, AMS 6322, Cadmium Plate, Metric
SAE MA3304A Bolt - Machine, Hex Head, Drilled, PD Shank, MJ Thread, AMS 6322, Cadmium Plate, Metric
ADS AGS1617 Cleats, Single Hole Attachment (Light Alloy)
SAE AGS1617-4 AGS1617 Cleats, Single Hole Attachment (Light Alloy)
SAE AS9528B SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD,.1640-36 UNJF-3A
SAE AS9528C SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD,.1640-36 UNJF-3A
SAE AS9528A Screw, Machine Steel UNS G87400, Cadmium Plate, Drilled, 1 Hole, Hexagon Head,.1640-36 UNJF-3A
SAE AMS3635A-1960 PLASTIC SHEET Cellular, Shock Absorbing (Closed Cell, Foamed, Modified Vinyl Sheet)

Korean Agency for Technology and Standards (KATS)

KS G 2626-2019(2024) Steel sheet palettes for pupil
KS G 2626-2019 Steel sheet palettes for pupil
KS C 2367-1993 Rigid mica materials for punching
KS D 7082-2016 Perforated Aluminium Panel for Acoustic Use
KS D 7082-2016(2021) Perforated Aluminium Panel for Acoustic Use
KS D 7082-1991 Perforated Aluminium Panel for Acoustic Use
KS D 7082-2021 Perforated Aluminium Panel for Acoustic Use
KS W ISO 102-2016 Aircraft－Gravity filling orifices
KS M 7056-1982 TESTING METHOD FOR PUNCTURE OF PAPERBOARD
KS M 7056-1982(2002) TESTING METHOD FOR PUNCTURE OF PAPERBOARD
KS V ISO 8146:2013 Oval eyeplates
KS V ISO 8146:2004 Oval eyeplates
KS C IEC 60326-5-2003(2008) Printed boards－Part 5：Specification for single anddouble sided printed boards with plated-through holes

American Society of Mechanical Engineers (ASME)

ASME B16.36-2006 Orifice Flanges
ASME B16.36-1996 Orifice flanges
ASME B16.36-2020 Orifice Flanges
ASME B16.36-1988 Orifice flanges
ASME B16.36-1979 Orifice Flanges
ASME B16.36-2007 Orifice Flanges
ASME B16.36-2015 Orifice flanges
ASME B16.36-2025 Orifice Flanges
ASME B16.36-1975 Orifice Flanges
ASME B16.36-2009 Orifice Flanges
ASME MFC-14M-1995 Measurement of fluid flow using small bore precision orifice meters
ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ASME STP-TS-084-2018 Orifice Flow Coefficient Equation Comparison

German Institute for Standardization

DIN 82024:2018 Round eye plates
DIN 82024 E:2017-08 Round eye plates
DIN 82024:1990 Round eye plates
DIN 24041:2021-06 Perforated plates - Dimensions
DIN 24041:2022-06 Perforated plates - Dimensions
DIN 24043:1981 Oblong hole perforated plates; dimensions
DIN 24041:2021 Perforated plates - Dimensions
DIN 24041:1981 Perforated plates - Dimensions
DIN 24041:2002-12 Perforated plates - Dimensions
DIN 24041:2022 Perforated plates - Dimensions
DIN 24041 Perforated plates - Dimensions
DIN 7333:1962 Eyeletts for cardboard labels
DIN 24041 E:2021-03 Perforated plates - Dimensions
DIN 7333:1962-01 Eyeletts for cardboard labels
DIN 24041:2002 Perforated plates - Dimensions
DIN 87225 E:2018-05 Scuppers for free decks
DIN 87225:2018 Scuppers for free decks
DIN 28182:1964 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 87225:2018-12 Scuppers for free decks
DIN 24041:2021-03 Draft Document - Perforated plates - Dimensions
DIN 87225:2018-05 Draft Document - Scuppers for free decks
DIN 87226:1997-04 Scupper for freeboard deck
DIN 28182:2007-09 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 87226:2018-05 Draft Document - Scupper - Side cuppers for free decks
DIN 7952-2:1971-10 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 791:1967 Expanded metal
DIN 64805:1984 Double lift dobbies; cards, matrices
DIN 4271-3:1998-08 Class B 125 manhole tops - Covers
DIN 7952-2:1971 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 53488:1963 Testing the hole test of plastic plate
DIN 83223:2006-07 Bulb plates, perforated gratings or flooring grids for working floors and walkways
DIN ISO 21949:2001 Coated abrasives - Plain sheets with holes for dust extraction (ISO 21949:2001)
DIN 24041 E:2021 Draft Document - Perforated plates - Dimensions
DIN 86042:1978 Dummy Hole Plates (Spectacle Flanges); Mating Dimensions according to Nominal Pressure 10 and 16
DIN 28182:1987 Tubular heat exchangers; tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 28182:2007 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 24041/A1:2022-01 Draft Document - Perforated plates - Dimensions, Amendment 1
DIN 87225 E:2018 Draft Document - Scuppers for free decks
DIN 53142-1:2004 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 24041/A1 E:2022 Draft Document - Perforated plates - Dimensions, Amendment 1
DIN 86042 E:2015-06 Dummy Hole Plates (Spectacle Flanges); Mating Dimensions according to Nominal Pressure 10 and 16
DIN 53142-1 E:2014-09 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 53142-1:2014 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 24041 A1 E:2022-01 Perforated plates Dimensions, Amendment 1

American National Standards Institute （ANSI)

ANSI/ASME B16.36-2009 Orifice Flanges
ANSI/ASME B16.36-2020 Orifice Flanges
ANSI/ASME MFC-14M-2003 Measurement of Fluid Flow Using Small Bore Precision Orifice Meters
ANSI X3.21-1967 Rectangular Holes in Twelve-Row Punched Cards

American Society for Testing and Materials (ASTM)

ASTM E454-11 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-12 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E323-80(2004) Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E674-12(2016) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E674-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E454-12(2021) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-12(2016) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-80(2001) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E454-09 Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E674-09 Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E454-80(2004) Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
ASTM E674-80(2001) Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
ASTM E323-09 Standard Specification for Perforated-Plate Sieves for Testing Purposes
ASTM E323-11 Standard Specification for Perforated-Plate Sieves for Testing Purposes

British Standards Institution (BSI)

BS 1669:1950 Industrial perforated plate
BS 4185-5:1971 Machine tool components-Cover plates and apertures
BS 1669:1972 Specification for industrial perforated plates
BS 1722-14:2017 Fences. Specification for open mesh steel panel
BS 6511:1984 Specification for designation of perforations in industrial plate screens
BS ISO 16630:2017 Metallic materials. Sheet and strip. Hole expanding test
BS ISO 13319-1:2021 Determination of particle size distribution. Electrical sensing zone method. Aperture/orifice tube method

National Standardisation Body (ASRO)

STAS 10948-1988 PERFORATED PLATES FOR GENERAL PURPOSE
STAS 1624-1992 Cellular wooden plates for inner doors
STAS 1078-1973 Sives and screens for material testing and selecting PERFORATED PLATES

Czech Standards Institute (UNMZ)

CSN 22 1300-1955 The blade plate is used for drilling, enlarging and adjusting. Overview
CSN 24 3231-1973 Smooth angle plates with holes in one arm
CSN 15 3330-1966 Perforated plates in test sieves
CSN 24 3235-1973 Ribbed angle plates with holes in one arm
CSN 24 3236-1973 Ribbed angle plates with holes in both arms
CSN ON 72 2766-1966 Autoclaved porous concrete insulating panels
CSN 22 1340-1955 Linear Groove Drilling Machine, Cylindrical Shank and Carbide Blade Blade

GCC Standardization Organization

GSO ISO 565:2008 Test Sieves-Metal wire cloth, perforated metal plate and electroformed sheet-Nominal sizes of opening
BH GSO ISO 565:2024 Test Sieves-Metal wire cloth, perforated metal plate and electroformed sheet-Nominal sizes of opening
GSO ISO 13542:2015 Paper and board -- Specification for internal diameters of cores for reels
GSO ISO 16630:2010 Metallic materials -- Sheet and strip -- Hole expanding test
GSO ISO 7806:2013 Industrial plate screens -- Codification for designating perforations

Welding Research Council

BULLETIN 80-1962 ANALYSIS OF A PERFORATED CIRCULAR PLATE CONTAINING A RECTANGULAR ARRAY OF HOLES STRESSES AND DEFLECTIONS IN LATERALLY LOADED PERFORATED PLATES
BULLETIN 52-1959 A REVIEW@ COMPARISON AND MODIFICATION OF PRESENT DEFLECTION THEORY FOR FLAT PERFORATED PLATES CORRELATION OF EXPERIMENTAL DATA WITH THEORY FOR PERFORATED PLATES WITH A TRIANGULAR HOLE ARRAY

International Organization for Standardization (ISO)

ISO 565:1990 Test sieves; metal wire cloth, perforated metal plate and electroformed sheet; nominal sizes of openings
ISO 2194 Industrial screens - Woven wire cloth, perforated plate and electroformed sheet - Designation and nominal sizes of openings
ISO 7806:1983 Industrial plate screens; Codification for designating perforations
ISO 2194:1991 Industrial screens; woven wire cloth, perforated plate and electroformed sheet; designation and nominal sizes of openings
ISO 16630:2017 Metallic materials - Sheet and strip - Hole expanding test
ISO 7805-2:1987 Industrial plate screens; Part 2 : Thickness below 3 mm
ISO 16630:2009 Metallic materials - Sheet and strip - Hole expanding test
ISO 7805-1:1984 Industrial plate screens; Part 1 : Thickness of 3 mm and above

Defense Logistics Agency

DLA MIL-S-12875 B-1969 SHEET, PERFORATED, METAL
DLA MIL-S-12875 B NOTICE 1-1997 SHEET, PERFORATED, METAL
DLA AN107001 THRU AN107100 REV 3-1986 BOLT - CRES DRILLED HEX HEAD, 1 HOLE, .5625-18 (INACTIVE AFTER 27 DEC 1966)
DLA AN106901 THRU AN107000 REV 3-1986 BOLT - CRES DRILLED HEX HEAD, 1 HOLE, .500-20 (INACTIVE AFTER 27 DEC 1966)
DLA AN107801 THRU AN107900 REV 3-1986 BOLT - CRES DRILLED HEX HEAD, 6 HOLES, .500-20 (INACTIVE AFTER 27 DEC 1966)
DLA AN106801 THRU AN106900 REV 3-1986 BOLT - CRES DRILLED HEX HEAD, 1 HOLE, .4375-20 (INACTIVE AFTER 27 DEC 1966)
DLA MIL-DTL-5423/7 G-2009 BOOT, DUST AND WATER SEAL, TYPE B (FOR PUSHBUTTON SWITCHES), STYLE 2 (ONE ?HOLE MOUNTING, DRILLED PANEL), STYLE 2S (RFI-SHIELDED, ONE ?HOLE MOUNTING, DRILLED PANEL)
DLA AN103001 THRU AN103100 REV 5-1987 BOLT - DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN103401 THRU AN103500 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103701 THRU AN103800 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN104001 THRU AN104100 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104401 THRU AN104500 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN102901 THRU AN103000 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN103301 THRU AN103400 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103601 THRU AN103700 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN104001 THRU AN104100 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104301 THRU AN104400 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN107901 THRU AN108000 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN103101 THRU AN103200 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103501 THRU AN103600 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103801 THRU AN103900 REV 2 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN104101 THRU AN104200 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN107001 THRU AN107100 REV 3 VALID NOTICE 1-19 BOLT - CRES DRILLED HEX HEAD, 1 HOLE, .5625-18 (INACTIVE AFTER 27 DEC 1966)
DLA AN102901 THRU AN103000 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN103301 THRU AN103400 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103601 THRU AN103700 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN103901 THRU AN104000 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN104301 THRU AN104400 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN107901 THRU AN108000 REV 3 (1)-2003 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN102801 THRU AN102900 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN103201 THRU AN103300 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103601 THRU AN103700 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .750-16
DLA AN103901 THRU AN104000 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN104201 THRU AN104300 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN102801 THRU AN102900 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN103201 THRU AN103300 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103501 THRU AN103600 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103901 THRU AN104000 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .3125-24
DLA AN104201 THRU AN104300 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN103101 THRU AN103200 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103401 THRU AN103500 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103801 THRU AN103900 REV 2 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN104101 THRU AN104200 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN103101 THRU AN103200 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .375-24
DLA AN103401 THRU AN103500 REV 3 VALID NOTICE 1-19 BOLT - DRILLED HEX HEAD, 1 HOLE, .5625-18
DLA AN103701 THRU AN103800 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN104101 THRU AN104200 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN104401 THRU AN104500 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN102901 THRU AN103000 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .250-28
DLA AN103001 THRU AN103100 REV 5 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN103301 THRU AN103400 REV 3-1986 BOLT - DRILLED HEX HEAD, 1 HOLE, .500-20
DLA AN103701 THRU AN103800 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .190-32
DLA AN104001 THRU AN104100 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 6 HOLES, .375-24
DLA AN104301 THRU AN104400 REV 3-1986 BOLT - DRILLED HEX HEAD, 6 HOLES, .5625-18
DLA AN104401 THRU AN104500 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .625-18
DLA AN106601 THRU AN106700 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 1 HOLE, .3125-24
DLA AN106801 THRU AN106900 REV 3 VALID NOTICE 1-19 BOLT - CRES DRILLED HEX HEAD, 1 HOLE, .4375-20 (INACTIVE AFTER 27 DEC 1966)
DLA MIL-STD-1672-1975 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
DLA AN102801 THRU AN102900 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .190-32
DLA AN103201 THRU AN103300 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 1 HOLE, .4375-20
DLA AN103501 THRU AN103600 REV 3 VN 1-1994 BOLT - DRILLED HEX HEAD, 1 HOLE, .625-18
DLA AN103801 THRU AN103900 REV 2-1969 BOLT - DRILLED HEX HEAD, 6 HOLES, .250-28
DLA AN104201 THRU AN104300 REV 3 VALID NOTICE 2-20 BOLT - DRILLED HEX HEAD, 6 HOLES, .500-20
DLA AN107701 THRU AN107800 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .4375-20
DLA AN108101 THRU AN108200 REV 3-1986 BOLT-CRES DRILLED HEX HEAD, 6 HOLES, .750-16
DLA MIL-STD-1672 VALID NOTICE 1-1991 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
DLA AN107301 THRU AN107400 REV 3 (1)-2003 BOLT - CRES DRILLED HEX HEAD, 6 HOLES, .190-32
DLA MIL-STD-1672 VALID NOTICE 2-2001 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
DLA MIL-STD-1672 VALID NOTICE 3-2006 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
DLA AN107301 THRU AN107400 REV 3-1986 BOLT - CRES DRILLED HEX HEAD, 6 HOLES, .190-32
DLA A-A-59385-1999 GRINDING MACHINE, CENTER HOLE, VERTICAL, FLOOR-MOUNTED
DLA A-A-59385 VALID NOTICE 1-2005 GRINDING MACHINE, CENTER HOLE, VERTICAL, FLOOR-MOUNTED

Finnish Standards Institute

SFS 8387-1986 In case of interpretation disputes the Finnish text applies
SFS C.5.28-1953 Uppoasennusrasian 5-aukkoinen peitelevy
SFS C.5.25-1953 Uppoasennusrasian 2-aukkoinen peitelevy
SFS C.5.27-1953 Uppoasennusrasian 4-aukkoinen peitelevy
SFS C.5.26-1953 Uppoasennusrasian 3-aukkoinen peitelevy
SFS 9016-1988 shipbuilding. Filter with perforated plates and mesh
SFS C.5.24-1953 Square 1-hole cover for equipment box
SFS 8388-1986 In case of interpretation disputes the Finnish text applies
SFS C.5.23-1953 1 hole round cover plate for equipment box
SFS 4184-1978 Wood perimeter, wood back hole board frame, tall type

Cuban Institute of Standards and Metrology

NC 42-10-1968 Porosity in paper and board

GM Holden Ltd

HOLDEN HN 1778-2025 Perforated PVC Sheeting - Headlining Grade
HOLDEN HN 1778-2004 Perforated PVC Sheeting - Headlining Grade

Spanish Association for Standardization (UNE)

UNE 20621-4:1983 PRINTED BOARDS. SPECIFICATION FOR SINGLE AND DOUBLE SIDED BOARDS WITH PLAIN HOLES
UNE 20621-5:1985 PRINTED BOARDS. SPECIFICATION FOR SINGLE AND DOUBLE SIDED BOARDS WITH PLATED-THROUGH HOLES
UNE 27361:1974 DECK INLETS FOR DRILL AND FILLING.
UNE 7311:1973 POROSITY TEST OF COVERING SLATES
UNE 57-076-1992 Board. Determination of puncture resistance
UNE 27365:1974 DECK DOWEL FOR DRILL AND FILLING INLETS.

Magyar Szabványügyi Testület

MSZ 192-1983 porous plate sieve test

Ente Nazionale Italiano di Unificazione

UNI 6206-1968 Ship drainage holes. Steel Deck Drain Cover
UNI 6191-1968 Ship drainage holes. Solids for deck scuppers
UNI 6196-1968 Ship drainage holes. Shell plating with directly connected odorless drainage holes for shelled steel decks
UNI 6183-1968 Ship drainage holes. Covered scuppers for steel decking below strength decking
UNI 6197-1968 Ship drainage holes. Shell plating with angle-jointed odorless scuppers for shelled steel decks
UNI 6233:1968 Ogive rotary files and rasps with threaded hole.
UNI 6182-1968 Ship drainage holes. Drainage holes for steel decks with thickness ≥20mm
UNI 6187-1968 Ship drainage holes. Direct-connected odorless scuppers for shelled steel decks
UNI 6188-1968 Ship drainage holes. Odorless scuppers with angular connections for shelled steel decks
UNI 2333-1943 Perforated steel plate for inspection mesh screen
UNI 6194-1968 Ship drainage holes. Straight-jointed shell plating for timber-lined upper deck scuppers
UNI 6195-1968 Ship drainage holes. Angular jointed shell plating for timber lined upper deck scuppers
UNI 6192-1968 Ship drainage holes. Solids for covered scuppers in steel decks below strength decks
UNI 5531:1979 Machine tools. T-slot square nuts.
UNI 6184-1968 Ship drainage holes. Covered scuppers for strength steel decking
UNI 6413:1969 Light metal rivets for shipbuilding. Hole diameters and smap-rivets.
UNI 6200-1968 Ship drainage holes. Siphons with direct connection odorless drain holes for shelled steel decks

Canadian Standards Association (CSA)

CSA C22.2 No.79-1970 Cellular Metal and Cellular Concrete Floor Raceways and Fittings
CSA C22.2 No.79-1978(R2013) Cellular Metal and Cellular Concrete Floor Raceways and Fittings
CSA B70.1-2003(R2017) Frame and cover maintenance holes and rainwater inlets
CAN/CSA-B64.3-M88-1988 Discharge Orifice Backflow Preventers (DArOD)

Japanese Industrial Standards Committee (JISC)

JIS A 6305:1978 Perforated aluminium panel for acoustic use
JIS A 6302:1975 Perforated asbestos cement flat sheets for acoustic use

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC DR-572A CD-2007 Drilling Guidelines for Printed Boards
IPC DR-572-1988 Drilling Guidelines for Printed Boards

Association of German Mechanical Engineers

VDI/VDE 2041-1975 Orifice plates and nozzles for special applications

Bureau of Indian Standards

IS 10483-1983 Industrial plate screen mesh code
IS 6154-1971 Specification for perforated plates for dryers
IS 5742-2-1970 Terms and symbols for sieve bottoms: Part II Perforated plates

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 2230-2007 Test sieves.Metal wire cloth,perforated metal plate and electroformed sheet.Nominal sizes of openings

Association Francaise de Normalisation

NF Q09-001:1975 Paper and board. Ordinary filling systems. Dimensional specifications for file fasteners and holes in sheets.
NF T54-116:1973 Plastic. Sheets. Determination of resistance to perforation. Perforametre method.
NF B51-327:1977 Plywood. Dynamic punching test.
NF ISO 9269:1989 Surgical implants - Metal bone plates - Counterbores and bores for conical-base screws
NF Q03-034:1968 Paper and board tests. Corrugated board. Determination of dynamic puncture strength.

United States Navy

NAVY AN367 REV 2 VALID NOTICE 1-1989 NUT, PLATE, COUNTERSUNK 82 DEG.
NAVY AN367 REV 2-1949 NUT, PLATE, COUNTERSUNK 82 DEG.
NAVY MS18301 REV B-1992 HIGH PRESSURE DRAIN ORIFICE PLATES AND STRAINERS
NAVY MIL-A-23054 A (1)-1984 ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED
NAVY MIL-A-23054 A VALID NOTICE 1-1990 ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED

Austrian Standards

ONORM A 5504-1988 Packaging testing; puncture test for board and corrugated fibreboard

Swedish Institute for Standards

SIS SS 78 06 81-1990 Shipbuilding — Manhole cover with coaming, oval
SIS SMS 714-1963 Draw template with carbide core and round hole
SS 780334:1990 Shipbuilding - Cover plate for manhole covers, oval
SIS SS 78 06 82-1985 Shipbuilding - Manhole cover, recessed coaming - Oval

Yugoslav Association for Standardization

JUS G.S2.638-1985 Plastics. Hole test on sheets.

Military Standards (MIL-STD)

MIL MIL-DTL-5423/7G-2009 Boot, Dust and Water Seal, Type B (for Pushbutton Switches), Style 2 (One - Hole Mounting, Drilled Panel), Style 2S (RFI-Shielded, One - Hole Mounting, Drilled Panel)
MIL MIL-DTL-5423/7F-2008 Boot, Dust and Water Seal, Type B (for Pushbutton Switches), Style 2 (One - Hole Mounting, Drilled Panel), Style 2S (RFI-Shielded, One - Hole Mounting, Drilled Panel)
MIL MIL-DTL-5423/7E-2002 BOOT, DUST AND WATER SEAL, TYPE B (FOR PUSHBUTTON SWITCHES), STYLE 2 (ONE - HOLE MOUNTING, DRILLED PANEL), STYLE 2S (RFI-SHIELDED, ONE - HOLE MOUNTING, DRILLED PANEL) (SUPERSEDING MIL-B-5423/7D)

Standards Norway

NS 2636:1969 Manhole cover for recused coaming

GB-REG

REG NACA-ARR-1942 The Strength and Stiffness of Shear Webs With and Without Lightening Holes

Gosstandart of Russia

GOST 25056-1981 Cast deck and ship hawses. Specifications
GOST 12632-1979 Porous rubber sheets and details for shoes bottom. Specifications
GOST 26969-1986 Standard orifice plates for flowmeters. Specifications
GOST 27678-2014 Wood-based panels and plywood. Perforatory method for determination of formaldehyde content

Türk Standardları Enstitüsü

TS 1226-1977 Metal Perforated Plates For Test Sieves

Indonesia Standards

SNI 05-6395-2000 Specification of orifice discharge measuring instrument

RAL Deutsches Institut für Gütesicherung und Kennzeichnung e.V.

RAL-GZ 615:2010-05 Quality Assurance for Perforated Sheets and Coils of Cold-Rolled and Hot-Rolled Steel Plates

National Aeronautics and Space Administration (NASA)

NASA-TN-D-5467-1969 Discharge coefficients for thick plate orifices with approach flow perpendicular and inclined to the orifice axis
NASA-CR-132548-1974 Shear buckling of square perforated plates

Natural Gas Processor's Association (NGPA)

GPA TP-13-1985 Experimental Orifice Meter Studies

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM51977-1998 Setscrew-Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNC-3A
AIA/NAS NASM51976-1998 Setscrew-Hexagon Socket, Half-Dog Point, Alloy Steel, Cadmium Plated, UNF-3A
AIA/NAS NAS500-2011 SPACER, NUT, PLATE, COUNTERSUNK Rev 9
NAS500-1992 Nut Spacer@ Plate - Countersunk (Rev 8)
NAS1834-1999 Insert@ Molded in@ Csk and Thru Clearance Hole@ Sandwich Panel (Rev 5)
NAS1834-1994 Insert@ Molded in@ Csk and Thru Clearance Hole@ Sandwich Panel (Rev 4)
AIA/NAS NAS 1834-1999 Insert, Molded in, Csk and Thru Clearance Hole, Sandwich Panel Revision 5; FSC5325
NAS1834-2010 INSERT@ MOLDED IN@ CSK AND THRU CLEARANCE HOLE@ SANDWICH PANEL (Rev 6)

American Welding Society (AWS)

WRC 124:1967 A Study of Perforated Plates with Square Penetration Patterns
WRC 080:1962 Part 1: Analysis Of A Perforated Circular Plate Containing A Rectangular Array Of Holes

Process Industry Practices

PIP PCFFL000-2021 Orifice Plate Fabrication Details [Technical Revision]
PIP PCIFL100-2020 Process Control - Orifice Plate Installation Details

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 16630:2010 Metallic materials -- Sheet and strip -- Hole expanding test

Aerospace Industries Association

AIA NAS948 Printed Circuit Board Drilling Machine Numerically Controlled

Netherlands Institute for Standardization

NEN 2560-1980 Test sieves Wirescreens and perforated plates with round and square holes

Lithuanian Standards Office

LST EN 123100+A1-2001 Sectional Specification: Single and double-sided printed boards with plain holes

International Electrotechnical Commission (IEC)

PQC 89-1990 Sectional Specification: Single and Double-Sided Printed Boards with Plain Holes

Danish Standards Foundation

DS/EN 123100+A1:1998 Sectional Specification: Single and double-sided printed boards with plain holes

European Committee for Standardization (CEN)

EN 622-4:1997 Fibreboards - Specifications - Part 4: Requirements for Softboards

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4266.22:2004(R2006) Reconstituted wood-based panels - Methods of test - Porosity of laminated surface
AS/NZS 4266.22:2004/AMD 1:2006 Reconstituted wood-based panels - Methods of test - Porosity of laminated surface

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 7806:2016 Industrial plate screens -- Codification for designating perforations

Others: