GB/T 6005-2008 in English

《GB/T 6005-2008试验筛 金属丝编织网、穿孔板和电成型薄板　筛孔的基本尺寸》由TC168（全国颗粒表征与分检及筛网标准化技术委员会）归口，主管部门为国家标准化管理委员会。
本标准规定了作为试验筛筛分介质的金属丝编织网、穿孔板和电成型薄板的筛孔的基本尺寸。
本标准适用于金属丝编织网、穿孔板和电成型薄板。
本标准中金属丝编织网和电成型薄板的筛孔的基本尺寸,小于或等于32μm 的,均采用R′10系列作为主要尺寸系列。
鉴于尺寸小于32μm 的相邻基本尺寸之间的间隔很小,因此,对R′10 系列基本尺寸的选择作了限制。

Scope

This standard specifies the basic dimensions of sieve openings of single wire braided mesh, perforated plate and electroformed sheet used as the sieving medium of test sieves. This standard applies to woven wire mesh, perforated sheet and electroformed sheet. In this standard, the basic size of the sieve hole of the wire mesh and the electroformed sheet is less than or equal to 32 μm, and the R'10 series is used as the main size series. In view of the small interval between adjacent basic dimensions smaller than 32 μm, the selection of basic dimensions of the R'10 series is limited. The ratio between adjacent dimensions in the series is shown in Table 1.