six-well plate size

six-well plate size, Total:62 items.

The international standard classification for "six-well plate size" includes: Hand-operated tools , Particle size analysis. sieving .

The Chinese standard classification for "six-well plate size" includes: Fasteners , Hand tool , Sieving, Sieve Plate and Sieve Screen .

Professional Standard - Aviation

JB/ZQ 4718-2006 Size of countersink for fastener cheese head and external hexagon socket head cap screw
JB/T 3411.34-1999 Hexagon piercer - Dimensions

GB/T 6005-1997 Test sieves-Metal wire cloth, perforated metal plate and electroformed sheet-Nominal sizes of opening
GB/T 6005-2008 Test sieves - Metal wire cloth perforated metal plate and electroformed sheet - Nominal sizes of openings

DIN 24041:1981 Perforated plates - Dimensions
DIN 24041:2022-06 Perforated plates - Dimensions
DIN 24041 Perforated plates - Dimensions
DIN 24041:2021 Perforated plates - Dimensions
DIN 24041:2022 Perforated plates - Dimensions
DIN 24041 E:2021-03 Perforated plates - Dimensions
DIN 24041:2002 Perforated plates - Dimensions
DIN 974-2:1991-05 Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions / Note: DIN 74-3 (1991-05) remains valid alongside this standard until 1996-04-30.
DIN 46294:1985-04 Terminal board, square shaped with six terminals; main dimensions / Note: To be replaced by DIN 46294 (2021-02).
DIN TS 46294:2024-04 Terminal board, square shaped with six terminals - Main dimensions
DIN 974-2:1991 Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions

NF E66-156:1985 Hexagonal dienuts. Dimensions.
NF Q09-001:1975 Paper and board. Ordinary filling systems. Dimensional specifications for file fasteners and holes in sheets.

GOST R 50561-1993 Hexagonal dienuts. Dimensions
GOST 21941-1976 Die chucks for turret lathes. Design and dimensions
GOST 8878-1993 Hexagonol socket cone-point set screws. Product grades A and B. Specifications
GOST 22400-1977 Tap wrenches with six nests for tools with square shanks. Basic dimensions
GOST 20865-1981 Adjusting fixturing hexahedral supports with threaded holes. Design and dimensions
GOST 21942-1976 Sleeves of die chucks for turret lathes. Design and dimensions
GOST 7817-1980 Product grade A fit bolts with hexagon reduced head. Construction and dimensions
GOST 16720-1971 Shanks with punch hole for dies of sheet pressing. Construction and dimensions
GOST 18810-1980 Chamfered guide plates with threaded bores. Design and dimensions
GOST 17186-1971 Turret lathe collets with rib and inclined hole. Design and dimensions
GOST 17180-1971 Turret lathe collets with eccentrically positioned cylindrical hole. Design and dimensions
GOST 10342-1980 Cheese-head non-falling-out screws with hexagon socket for "width across flats", product grade B. Design and dimensions
GOST 17181-1971 Turret lathe collets with inclined cylindrical hole. Design and dimensions
GOST 16671-1980 Liner plates for holders of female dies with elongated oblong hole. Construction and dimensions
GOST 16667-1980 Liner plates for female dies with holders with two mounting holes. Construction and dimensions
GOST 16670-1980 Liner plates for holders of elongated-oblong punches. Construction and dimensions

ISO 7226:1988 Hexagonal dienuts
ISO 7226:1998 Hexagonal dienuts
ISO 565:1990 Test sieves; metal wire cloth, perforated metal plate and electroformed sheet; nominal sizes of openings

STAS 5606-1980 Precision screws TIIRRADFD PUT, WITII HEXAGON SOCKHT AND COU.AR Sizes
STAS 4142-1974 COUNTERBORES WITH TAPER HOLE Dimensions
STAS 8054/6-1980 COUNTERBORES WITH TAPER HOLE Dimensions
STAS 4141-1974 TAPER SHANK GOUNTERBORES Dimensions
STAS 9846-1974 PARALLEL SHANK COUNTER- BORES Dimensions
STAS 9282-1973 PLUCS FOR LCBRICATING HOLES Dimensions
STAS 8054/5-1980-1 TAPER SHANK COUNTERBORES Dimensions
STAS 8054/5-1980 TAPER SHANK COUNTERBORES Dimensions
STAS 8054/7-1976 WORM COUNTERBORE Dimensions