Microplate Dimensions

Microplate Dimensions, Total:48 items.

The international standard classification for "Microplate Dimensions" includes: .

The Chinese standard classification for "Microplate Dimensions" includes: .

American National Standards Institute （ANSI)

ANSI/SLAS 2-2004 Microplates - Height Dimensions, (formerly recognized as ANSI/SBS 2-2004)
ANSI/SLAS 1-2004 Microplates - Footprint Dimensions (formerly recognized as ANSI/SBS 1-2004)
ANSI/SLAS 3-2004 Microplates - Bottom Outside Flange Dimensions (formerly recognized as ANSI/SBS 3-2004)

GOST 14034-1974 Centre holes. Dimensions
GOST 16637-1980 Female dies with round hole. Construction and dimensions
GOST 12466-1967 Shackles with thread holes. Design and sizes
GOST 16641-1980 Quick-changing female dies with round hole. Construction and dimensions
GOST 16643-1980 Quick-changing female dies with square hole. Construction and dimensions
GOST 13143-1988 Office perforators. Basic parameters and dimensions
GOST 16644-1980 Female dies with oblong hole. Construction and dimensions
GOST 16859-1971 Wedges for inserted blade counterbores. Design and dimensions
GOST 16639-1980 Female dies with round hole and flange. Construction and dimensions
GOST R ISO 6959-1996 Cross-country ski boots with three pin holes. Demensions, interface and design
GOST R ISO 6959-1995 Gross-country ski boots with three pin holes. Dimensions. interface and design
GOST 10081-1984 Machine tapered reamers, taper 1:50. Basic dimensions
GOST 18360-1993 Plate snap-gauges for diameters from 3 to 260 mm. Dimensions

DIN 24041 E:2021 Draft Document - Perforated plates - Dimensions
DIN 24041/A1 E:2022 Draft Document - Perforated plates - Dimensions, Amendment 1

BS EN 15006:2007 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
BS EN 325:1993 Wood-based panels. Determination of dimensions of test pieces
BS EN 325:2012 Wood-based panels. Determination of dimensions of test pieces
BS EN ISO 1923:1995 Cellular plastics and rubbers - Determination of linear dimensions
BS EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
BS EN 62496-2-2:2011 Optical circuit boards. Measurements. Dimensions of optical circuit boards
BS EN 15008:2007 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture
BS ISO 15786:2009 Technical drawings - Simplified representation and dimensioning of holes
BS EN 15008:2006 Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture

NF B51-241*NF EN 325:2012 Wood-based panels - Determination of dimensions of test pieces
NF Z10-004:1973 Continous printed forms. Dimensions and drive holes.
NF R81-101:1980 Rigid cellular plastics. Determination of dimensional variations on immersion in fluids.

FORD WSP-M9H137-A-1993 SCREEN, POLYESTER, MONOFILAMENT, 120 MICROMETER MESH OPENING
FORD ESH-M9H99-A1-1991 SCREEN, NYLON, MONOFILAMENT, 275 MICROMETRE MESH OPENING