Enthalpy Yong environmental protection equipment

Enthalpy Yong environmental protection equipment, Total:421 items.

The international standard classification for "Enthalpy Yong environmental protection equipment" includes: Installations and equipment for waste disposal and treatment , Electrical apparatus for explosive atmospheres .

The Chinese standard classification for "Enthalpy Yong environmental protection equipment" includes: Environmental protection equipment , Explosion-proof electric apparatus .

Group Standards of the People's Republic of China

T/CERS 0002-2018 Alternating-current metal-enclosed switchgear and controlgear for rated voltages above 3.6kV and up to and including 40.5kV （Environment-friendly gas）
T/ZZB 0335-2018 Precision stainless steel sheet/strip for environmental protection equipment
T/QGCML 1297-2023 12kV environmentally friendly gas insulated ring network switchgear and control equipment
T/EERT 040.3-2023 Safety management of environmental protection equipment and facility electroplating industry
T/QGCML 4203-2024 Environmental protection equipment manufacturing general requirements for desulfurization and denitrification equipment
T/ZPP 018-2022 System design requirements for marine engineering environmental protection technology equipment
T/TIC 059-2024 12kV environmentally friendly gas-insulated metal-enclosed switchgear
T/EERT 040.2-2024 Environmental protection equipment and facilities safety management Design and diagnosis
T/NDAS 24-2020 Environmental protection equipment for dry film of water paint
T/QGCML 4037-2024 Technical specifications for the preparation of rice husk-based environmentally friendly thermal insulation mortar
T/WHDQHX 007-2024 Environmentally-friendly gas-insulated metal-enclosed switchgear
T/CI 369-2024 Environmental protection type intelligent secondary water supply complete set of equipment
T/CASME 255-2023 Domestic waste pyrolysis regeneration transformation environmental protection equipment
T/DZJN 146-2023 Environmental protection equipment maintenance, installation and operation enterprise capacity evaluation specification
T/CIET 445-2024 Environmental protection equipment manufacturing desulfurization equipment technical specifications
T/EERT 039-2023 Environmental protection equipment and facilities safety management Industrial wastewater treatment facility safety risk identification assessment
T/EERT 040.1-2024 Environmental protection equipment and facilities safety management General
T/GXAIA 003-2024 Specification for saving and backing up monitoring data of ecological environment monitoring instruments and equipment
T/EERT 040.4-2023 Safety management of environmental protection equipment and facilities dyeing industry
T/CCMA 0066-2018 Environmental emission limits of asphalt mixing plant
T/ZAMEE 12-2022 Standard for equipment management of environmental testing laboratories
T/ZZB 2848-2022 12kV~40.5kV environment-friendly gas insulated AC metal-enclosed switchgear and control equipment
T/QGCML 4759-2025 Environmental protection equipment manufacturing Technical requirements for carbon dioxide recovery equipment in coal-fired flue gas
T/CIET 454-2024 Environmental protection device manufacturing dust removal equipment technical specifications

Professional Standard - Machinery

JB/T 5662-1992 Classification of Environmental Protection Apparatus
JB/T 14507-2023 Environmental protection equipment —Fluoroplastics flue gas-water heat exchanger
JB/T 14505-2023 Environmental protection equipment —Fluoroplastics tube heat exchanger
JB/T 6930-1993 Environmental protection equipments Terminologies
JB/T 14506-2023 Environmental protection equipment —Fluoroplastics flue gas-gas heat exchanger
JB/T 12816-2016 Building construction machinery and equipment - Environment-friendly concrete mixing plant (tower)

Professional Standard - Environmental Protection

HJ/T 11-1996 Classification and nomenclature for environmental protection equipments
HJ/T 8.3-1994 HJ/T 8.3-1994
HJ/T 267-2006 Specifications for environmental protection product -- Electric coagulating equipment
HJ/T 8.5-1994 Specification for Management of Environmental Protection Archives - Instruments and Equipments for Environmental Protection

Hebei Provincial Standard of the People's Republic of China

DB13/T 2138-2014 Square environmental protection cable for telecommunication equipment

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3836.2-2021 Explosive atmospheres—Part 2：Equipment protection by flameproof enclosures “d”
GB/T 3836.8-2021 Explosive atmospheres—Part 8: Equipment protection by type of protection “n”
GB/T 3836.6-2017 Explosive atmospheres―Part 6:Equipment protection by liquid immersion“o”
GB/T 3836.9-2021 Explosive atmospheres—Part 9：Equipment protection by encapsulation “m”
GB 3836.9-2014 Explosive atmospheres―Part 9:Equipment protection by type of protection “m”
GB/T 3836.24-2017 Explosive atmospheres―Part 24:Equipment protection by special protection“s”
GB 3836.20-2010 Explosive atmospheres - Part 20: Equipment with equipment protection level (EPL) Ga
GB 3836.2-2010 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures“d”
GB 3836.8-2014 Explosive atmospheres―Part 8:Equipment protection by type of protection “n”
GB 3836.3-2010 Explosive atmospheres - Part 3:Equipment protection by increased safety e
GB/T 3836.3-2021 Explosive atmospheres—Part 3：Equipment protection by increased safety“e”
GB/T 3836.7-2017 Explosive atmospheres―Part 7:Equipment protection by powder filling“q”
GB/T 3836.5-2017 Explosive atmospheres-Part 5:Equipment protection by pressurized enclosure"p"
GB/T 3836.5-2021 Explosive atmospheres—Part 5:Equipment protection by pressurized enclosure p

Professional Standard - Aerospace

QJ 2134-1991 Classification and codes of environmental protection system data element environmental pollution prevention and control equipment and facilities

未注明发布机构

RUL EA.2-2012 Electrical apparatus for explosive atmospheres - Part 0: Equipment protection levels, classification and general requirements of electrical apparatus

Taiwan Provincial Standard of the People's Republic of China

CNS 3376-15-2002 Electrical apparatus for explosive gas atmospheres - Part 15: Type of protection 〝n〞
CNS 412-1957 Symbols of Protective Devices
CNS 3376.15-2002 Electrical apparatus for explosive gas atmospheres - Part 15: Type of protection 〝n〞

Spanish Association for Standardization (UNE)

UNE-EN 1498:2007 Personal fall protection equipment - Rescue loops
UNE-CLC/TR 60079-33:2015 Explosive atmospheres - Part 33: Equipment protection by special protection 's' (Endorsed by AENOR in June of 2015.)
UNE-EN 62075:2013 Audio/video, information and communication technology equipment - Environmentally conscious design
UNE-EN IEC 60079-15:2021 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
UNE-EN 62075:2009 Audio/video, information and communication technology equipment- Environmentally conscious design
AENOR UNE-EN 60079-15:2013 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
UNE-EN 60079-15:2013 Explosive atmospheres -- Part 15: Equipment protection by type of protection "n"
UNE-EN 60079-6:2008 Explosive atmospheres -- Part 6: Equipment protection by oil immersion "o"
UNE-EN 60079-18:2010 Explosive atmospheres -- Part 18: Equipment protection by encapsulation "m"
UNE-EN 60079-13:2011 Explosive atmospheres -- Part 13: Equipment protection by pressurized room "p"
AENOR UNE-EN 60079-5:2016 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
AENOR UNE-EN 60079-1:2008 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
UNE-EN 60079-1:2015/AC:2018-09 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
UNE-EN 60079-6:2016 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
UNE-EN 60079-11:2013 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
UNE-EN 60079-1:2015 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
UNE-EN 60079-1:2008 Explosive atmospheres -- Part 1: Equipment protection by flameproof enclosures "d"
UNE-EN 60079-5:2016 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
UNE-EN 60079-5:2008 Explosive atmospheres -- Part 5: Equipment protection by powder filling "q"
UNE-EN 60079-18:2016 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
UNE-EN 60079-2:2008 Explosive atmospheres -- Part 2: Equipment protection by pressurized enclosure "p"
AENOR UNE-EN 60079-2:2015 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
UNE-EN 60079-2:2015 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
UNE-EN 60079-18:2016/AC:2018-09 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
AENOR UNE-EN 60079-11:2013 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
UNE-EN 60079-18:2016/A1:2018 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

British Standards Institution (BSI)

BS EN IEC 60079-15:2019 Explosive atmospheres - Equipment protection by type of protection "n"
BS IEC 60079-33:2013 Explosive atmospheres. Equipment protection by special protection "s"
BS EN 60079-26:2007 Explosive atmospheres. Equipment with equipment protection level (EPL) Ga
BS PD CLC/TR 60079-33:2015 Explosive atmospheres-Equipment protection by special protection 's'
BS EN 60079-18:2015+A1:2017 Explosive atmospheres - Equipment protection by encapsulation “m”
BS EN 62075:2012(2013) Audio, video, information and communication technology equipment — Environmentally conscious design
BS EN 60079-5:2015+A1:2024 Explosive atmospheres - Equipment protection by powder filling "q"
BS EN 60079-1:2014+A11:2024 Explosive atmospheres - Equipment protection by flameproof enclosures "d"
BS 6467-1:1985 Electrical apparatus with protection by enclosure for use in the presence of combustible dusts-Specification for apparatus
BS EN 60079-18:2015+A1:2017(2018) Explosive atmospheres Part 18 : Equipment protection by encapsulation "m"
11/30246444 DC BS EN 62075. Audio/video, information and communication technology equipment. Environmentally conscious design
BS 4683-4:1973 Specification for electrical apparatus for explosive atmospheres-Type of protection "e"
BS EN 60079-28:2007 Explosive atmospheres - Protection of equipment and transmission systems using optical radiation
BS EN 60079-7:2015+A11:2024 Explosive atmospheres - Equipment protection by increased safety "e"
24/30505017 DC BS EN IEC 60079-33 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
BS EN 60079-2:2014(2015) Explosive atmospheres Part 2 : Equipment protection by pressurized enclosure
BS EN 60079-1:2014(2020) Explosive atmospheres Part 1 : Equipment protection by flameproof enclosures "d"
BS EN 60079-11:2012(2014) Explosive atmospheres Part 11 : Equipment protection by intrinsic safety "i"
BS EN 60079-28:2015+A11:2024 Explosive atmospheres - Protection of equipment and transmission systems using optical radiation
BS EN ISO 19932-1:2013 Equipment for crop protection. Knapsack sprayers. Safety and environmental requirement
07/30168628 DC BS EN 60079-15. Explosive atmospheres. Part 15. Equipment protection by type of protection n
08/30186575 DC BS EN 60079-15. Explosive atmospheres. Part 15. Equipment protection by type of protection n
06/30153363 DC BS IEC 60079-31. Explosive atmospheres. Part 31. Equipment. Protection by enclosure tD
BS IEC 61241-4:2001 Electrical apparatus for use in the presence of combustible dust-Type of protection "pD"
BS EN IEC 60079-31:2024 Explosive atmospheres - Equipment dust ignition protection by enclosure "t"
BS ISO 17325-4:2018 Ships and marine technology. Marine environment protection. Oil booms - Auxiliary equipment
PD IEC TS 63428:2024 Guidance on material circulation considerations in environmentally conscious design
BS EN 13463-8:2003(2004) Non-electrical equipment for potentially explosive atmospheres. Protection by liquid immersion 'k'

Danish Standards Foundation

DS/EN 1498:2007 Personal fall protection equipment - Rescue loops
DANSK DS/CLC/TR 60079-33:2015 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
DANSK DS/EN 62075:2013 Audio/video, information and communication technology equipment - Environmentally conscious design
DS/EN 62075:2013 Audio/video, information and communication technology equipment - Environmentally conscious design
DS/IEC 60079-33:2012 Explosive atmospheres - Part 33: Equipment protection by special protection "s"
DS/EN 62075/AC:2013 Audio/video, information and communication technology equipment - Environmentally conscious design
DANSK DS/EN 62075/AC:2013 Audio/video, information and communication technology equipment - Environmentally conscious design
DS/EN 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection ""n""
DANSK DS/EN IEC 60079-15:2019 Explosive atmospheres – Part 15: Equipment protection by type of protection "n"
DANSK DS/EN 60079-15:2010 Explosive atmospheres – Part 15: Equipment protection by type of protection "n"
DS/EN 60079-6:2007 Explosive atmospheres - Part 6: Equipment protection by oil immersion ""o""
DANSK DS/EN IEC 60079-11:2024 Explosive atmospheres – Part 11: Equipment protection by intrinsic safety "i"
DS/EN 60079-13:2011 Explosive atmospheres - Part 13: Equipment protection by pressurized room ""p""
DS/EN 60079-18:2010 Explosive atmospheres - Part 18: Equipment protection by encapsulation ""m""
DANSK DS/EN 60079-18:2009 Explosive atmospheres – Part 18: Equipment protection by encapsulation "m"
DANSK DS/EN 60079-18/AC:2018 Explosive atmospheres – Part 18: Equipment protection by encapsulation "m"
DS/EN 60079-5:2008 Explosive atmospheres - Part 5: Equipment protection by powder filling ""q""
DANSK DS/EN 60079-1/AC:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
DS/EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety ""i""
DANSK DS/EN 50021:1999 Electrical apparatus for potentially explosive atmospheres - Type of protection "n"
DS/EN 60079-1:2007 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures ""d""
DS/EN 60079-11:2007 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety ""i""
DANSK DS/EN 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
DS/EN 60079-2:2008 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure ""p""
DS/ETS 300019-2-4:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-4:Specification of environmental tests - Stationary use at non-weatherprotected locations
DS/ETS 300019-2-3:1994 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-3:Specification of environmental tests - Stationary use at weatherprotected locations
DS/ETS 300019-1-4/A1:1998 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-4: Classification of environmental conditions - Stationary use at non-weatherprotected locations
DANSK DS/EN 60079-11:2012 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
DANSK DS/EN 60079-2:2015 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
DANSK DS/EN 60079-1:2007 Explosive atmospheres – Part 1: Equipment protection by flameproof enclosures "d"
DANSK DS/EN 60079-6:2016 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
DS/ETS 300019-1-3:1993 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment. Part 1-3: Classification of environmental conditions. Stationary use at weatherprotected locations
DS/ETS 300019-1-4:1993 Introductory element. Equipment Engineering (EE); Environmental conditions and environmental test for telecommunications equipment. Part 1-4: Classification of environmental conditions. Stationary use at non-weatherprotected locations

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 60079.6:2015 Protection of oil-immersed equipment in explosive environments
AS/NZS 60079.15:2020/AMD 1:2021 Equipment protection for explosive environments by protection type
AS/NZS 60079.15:2020 Equipment protection for explosive environments by protection type
AS/NZS 60079.15:2011 Equipment protection for explosive environments by protection type
AS/NZS 60079.18:2011 Protecting equipment from explosive atmospheres through encapsulation
AS/NZS 60079.18:2016/AMD 1:2020 Protecting equipment from explosive atmospheres through encapsulation
AS/NZS 60079.33:2012 Explosive atmospheres, Part 33: Equipment protection by special protection ‘s’
AS/NZS IEC 60079.15:2020/AMD 1:2021 Explosive atmospheres, Part 15: Equipment protection by type of protection "n"
AS/NZS IEC 60079.15:2020(R2021) Explosive atmospheres, Part 15: Equipment protection by type of protection "n"
AS/NZS IEC 60079.15:2020 Explosive atmospheres, Part 15: Equipment protection by type of protection "n"
AS/NZS 1826:2008 Electrical equipment for explosive gas atmospheres-Special protection-Type of protection 's’
AS/NZS 60079.1:2015 Explosive environments protect equipment with explosion-proof enclosures
AS/NZS 1826(INT):2006 Electrical equipment for explosive gas atmospheres - Special protection - Type of protection s
AS/NZS 60079.2:2015 Protect equipment from explosive atmospheres with pressurized enclosures
AS/NZS 60079.31:2014 Equipment dust ignition protection for explosive atmosphere enclosures
AS/NZS IEC 60079.11:2024 Explosive atmospheres, Part 11: Equipment protection by intrinsic safety "i"
AS/NZS 60079.5:2015 Explosive atmospheres Part 5: Equipment protection by powdered filling 'q’
AS/NZS 60079.15:2006 Electrical apparatus for explosive gas atmospheres - Construction, test and marking of type of protection, ?n? electrical apparatus
AS/NZS 60079.18:2016 Explosive atmospheres, Part 18: Equipment protection by encapsulation "m"

Lithuanian Standards Office

LST EN 1498-2007 Personal fall protection equipment - Rescue loops
LST EN 62075-2008 Audio/video, information and communication technology equipment - Environmentally conscious design (IEC 62075:2008)
LST EN 62075-2013 Audio/video, information and communication technology equipment - Environmentally conscious design (IEC 62075:2012)
LST EN 62075-2013/AC-2013 Audio/video, information and communication technology equipment - Environmentally conscious design (IEC 62075:2012)
LST EN 60079-15-2010 Explosive atmospheres -- Part 15: Equipment protection by type of protection "n" (IEC 60079-15:2010)
LST EN 60079-26-2007 Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga (IEC 60079-26:2006)
LST ETS 301 019-1-4-2002 Equipment engineering (EE); Environmental conditions for telecommunications equipment; Part 1-4: Classifications of environmental conditions; Stationary use at non - weather protected locations

European Committee for Electrotechnical Standardization（CENELEC）

CLC/TR 60079-33-2015 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
EN 62075:2012 Audio/video, information and communication technology equipment - Environmentally conscious design
EN IEC 60079-15:2019 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN IEC 60079-15:2019/prAA Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN 60079-2:2014 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
EN 60079-1:2014/A11:2024 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 60079-31:2014 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
FprEN IEC 60079-31:2021 Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

South African Bureau of Standard

SANS 60079-26:2007 Explosive atmospheres Part 26: Equipment with equipment protection level (EPL) Ga
SANS 60079-1:2009 Explosive atmospheres Part 1: Equipment protection by flameproof enclosures "d"
SANS 60079-13:2011 Explosive atmospheres – Part 13: Equipment protection by pressurized room “p”
SANS 60079-18:2022 Explosive atmospheres Part 18: Equipment protected by enclosure "m"
SANS 60079-2:2007 Explosive atmospheres Part 2: Equipment protection by pressurized enclosures <
>
SANS 60079-2:2015 Explosive atmospheres Part 2: Equipment protection by flameproof enclosures
SANS 60079-11:2012 Explosive atmospheres Part 11: Equipment protection by intrinsic safety "i"
SANS 60079-15:2022 Explosive gas atmospheres - Part 15: Protection by protective equipment of type n

CZ-CSN

CSN 03 8804-1981 Specification of Protectlon of Technical Equipment against Environmental Influences
CSN OPA 34 2620-1967 Secure equipment design

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60079-33:2013 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
OS GSO IEC 60079-11:2013 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

Korean Agency for Technology and Standards (KATS)

KS C IEC 60079-26:2012 Explosive atmospheres － Part 26: Equipment with equipment protection level(EPL) Ga
KS C IEC 60079-26-2012(2017) Explosive atmospheres － Part 26: Equipment with equipment protection level(EPL) Ga
KS C 0916-2002 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES-TYPE OF PROTECTION
KS C IEC 60079-31-2019 Explosive atmospheres — Part 31: Equipment dust ignition protection by enclosure “t”
KS C IEC 60079-5-2019(2024) xplosive atmospheres — Part 5: Equipment protection by powder filling “q”
KS C 0916-1995 Electrical apparatus for explosive gas atmospheres-Type of protection"P"
KS C IEC 60079-7:2020 Explosive atmospheres — Part 7: Equipment protection by increased safety “e”
KS C IEC 60079-5-2019 xplosive atmospheres — Part 5: Equipment protection by powder filling “q”
KS C IEC 60079-6-2019 Explosive atmospheres — Part 6: Equipment protection by liquid immersion “o”
KS C IEC 60079-6:2019 Explosive atmospheres — Part 6: Equipment protection by liquid immersion “o”
KS C IEC 60079-7-2020 Explosive atmospheres — Part 7: Equipment protection by increased safety “e”
KS C IEC 60079-31:2019 Explosive atmospheres — Part 31: Equipment dust ignition protection by enclosure “t”
KS C IEC 60079-5:2019 xplosive atmospheres — Part 5: Equipment protection by powder filling “q”
KS C IEC 60079-6-2019(2024) Explosive atmospheres — Part 6: Equipment protection by liquid immersion “o”
KS C IEC 60079-2:2019 Explosive atmospheres — Part 2: Equipment protection by pressurized enclosures “p”
KS C IEC 60079-2-2019(2024) Explosive atmospheres — Part 2: Equipment protection by pressurized enclosures “p”
KS C IEC 60079-2-2019 Explosive atmospheres — Part 2: Equipment protection by pressurized enclosures “p”
KS C IEC 60079-1-2019 Explosive atmospheres — Part 1: Equipment protection by flameproof enclosures “d”
KS C IEC 60079-1:2019 Explosive atmospheres — Part 1: Equipment protection by flameproof enclosures “d”
KS C IEC 60079-1-2019(2024) Explosive atmospheres — Part 1: Equipment protection by flameproof enclosures “d”
KS C IEC 60079-18-2019(2024) Explosive atmospheres — Part 18: Equipment protection by encapsulation “m”

Association Francaise de Normalisation

NF C23-579-26:2007 Explosive atmospheres - Part 26 : equipment with equipment protection level (EPL) Ga.
NF C23-579-26*NF EN 60079-26:2015 Explosive atmospheres - Part 26 : equipment with equipment protection level (EPL) Ga
NF EN IEC 60079-15:2019 Explosive atmospheres - Part 15: protection of equipment by protection mode "n"
NF C23-579-15*NF EN IEC 60079-15:2019 Explosive atmospheres - Part 15 : equipment protection by type of protection "n"
NF C23-579-18/A1*NF EN 60079-18/A1:2017 Explosive atmospheres - Part 18 : Equipment protection by encapsulation "m"
NF L48-121:1948 Aircraft fluid installations. Tank equipment. Filters and retaining rings.
NF C23-579-7:2007 Explosive atmospheres - Part 7 : equipment protection by increased safety "e".
NF C23-579-18:2010 Explosive atmospheres - Part 18 : equipment protection by encapsulation "m".
NF C23-579-13:2011 Explosive atmospheres - Part 13 : equipment protection by pressurized rooms "p".
NF C23-579-7*NF EN 60079-7:2016 Explosive atmospheres - Part 7 : equipment protection by increased safety "e"
NF EN 60079-18:2015 Explosive atmospheres - Part 18: Protection of equipment by encapsulation "m"
NF EN 13080:2003 Agricultural equipment - Manure spreaders - Environmental protection - Requirements and test methods
NF C23-579-18*NF EN 60079-18:2015 Explosive atmospheres - Part 18 : equipment protection by encapsulation "m"
NF EN 60079-18/A1:2017 Explosive atmospheres - Part 18: Protection of equipment by encapsulation "m"
NF EN IEC 60079-11:2024 Explosive atmospheres - Part 11: éequipment protection by intrinsic safety "i"
NF C23-579-1*NF EN 60079-1:2015 Explosive atmospheres - Part 1 : equipment protection by flameproof enclosures "d"
NF EN 60079-6/A1:2024 Explosive atmospheres - Part 6 : equipment protection by liquid immersion "o"
NF EN 60079-1/A11:2024 Explosive atmospheres - Part 1 : equipment protection by flameproof enclosures "d"
NF EN 60079-7/A11:2024 Explosive atmospheres - Part 7 : equipment protection by increased safety "e"
NF C23-579-2*NF EN 60079-2:2015 Explosive atmospheres - Part 2 : equipment protection by pressurized enclosures "p"
NF C23-579-1/A11*NF EN 60079-1/A11:2024 Explosive atmospheres - Part 1 : equipment protection by flameproof enclosures "d"
NF EN 60079-5:2015 Explosive atmospheres - Part 5: Protection of equipment by powder filling "q"
NF EN 60079-11:2012 Explosive atmospheres - Part 11: protection of equipment by intrinsic safety "i"
NF C23-579-7/A1*NF EN IEC 60079-7/A1:2018 Explosive atmospheres - Part 7 : Equipment protection by increased safety "e"
NF EN 60079-5/A1:2024 Explosive atmospheres - Part 5 : equipment protection by powder filling "q"
NF C23-579-2:2008 Explosive atmospheres - Part 2 : equipment protection by pressurized enclosure "p".
NF EN 60079-1:2015 Explosive atmospheres - Part 1: Protection of equipment by flameproof enclosures "d"
NF C23-579-17:1999 Electrical apparatus for explosive gas atmospheres. Part 17 : inspection and maintenance of electrical installations in hazardous areas (other than mines).
NF EN IEC 60079-7/A1:2018 Explosive atmospheres - Part 7: Protection of equipment by increased safety "e"

North Atlantic Treaty Organization Standards Agency

STANAG 7102-2009 ENVIRONMENTAL PROTECTION HANDLING REQUIREMENTS FOR PETROLEUM HANDLING FACILITIES AND EQUIPMENT

Standard Association of Australia （SAA）

AS 1826:1983 Electrical equipment for explosive atmospheres - Special protection - Type of protection s
AS 1482:1985 Electrical equipment for explosive atmospheres - Protection by ventilation - Type of protection v
AS 1482:1985(R2013) Ventilation protection for electrical equipment used in explosive atmospheres Protection type v
AS 1482:1973 Protection by ventilation of electrical equipment for explosive atmospheres
AS 1021:1971 Protection by purging of electrical equipment for explosive atmospheres
AS 2238:1979 Electrical apparatus with type of protection `n' for explosive atmospheres
AS 1021:1980 Protection by purging of electrical equipment for explosive atmospheres
AS 1076.8:1977 Code of practice for selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications) - Apparatus with type of protection 's' - Special protection

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO IEC 60079-33:2016 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
BH GSO IEC 60079-11:2015 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

German Institute for Standardization

DIN EN 60079-26:2007 Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga (IEC 60079-26:2006); German version EN 60079-26:2007
DIN EN IEC 62430:2022-10*VDE 0042-2:2022-10 Environmentally conscious design (ECD)
DIN EN 12761-1:2002 Land and forestry machinery for plant protection - Equipment for applying plant protection agents and liquid fertilisers - Environmental protection - Part 1: General requirements
DIN IEC 60079-33 E:2009-10 Draft Document - Explosive atmospheres - Part 33: Equipment protection by special protection 's' (IEC 31/814/CD:2009)
DIN IEC 60079-33 E:2009 Draft Document - Explosive atmospheres - Part 33: Equipment protection by special protection 's' (IEC 31/814/CD:2009)
DIN IEC 60079-15 E:2007 Draft Document - Explosive atmospheres - Part 15: Equipment protection by type of protection "n" (IEC 31/704/CD:2007)
DIN EN 60079-15 E:2016 Draft Document - Explosive atmospheres - Part 15: Equipment protection by type of protection "n" (IEC 31/1235/CD:2015)
DIN EN 62075 E:2011-06 Draft Document - Audio/video, information and communication technology equipment - Environmentally conscious design (IEC 108/448/CDV:2011); German version FprEN 62075:2011
DIN EN 62075 E:2011 Draft Document - Audio/video, information and communication technology equipment - Environmentally conscious design (IEC 108/448/CDV:2011); German version FprEN 62075:2011

European Committee for Standardization (CEN)

CENELEC EN 62075-2008 Audio/video, information and communication technology equipment - Environmentally conscious design

Comitato Elettrotecnico Italiano

CEI EN IEC 60079-15:2019 Explosive atmospheres Part 15: Equipment protection by type of protection "n"
CEI EN 62075:2013 Audio/video, information and communication technology equipment - Environmentally conscious design
CEI EN 60079-15:2012 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
CEI EN IEC 60079-11:2025 Explosive atmospheres – Part 11: Equipment protection by intrinsic safety "i"
CEI EN 50303:2001 Equipment intended for use in potentially explosive atmospheres - Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust
CEI EN 60079-18:2016 Explosive atmospheres Part 18: Equipment protection by encapsulation "m"
CEI EN 60079-11:2012 Explosive atmospheres Part 11: Equipment protection by intrinsic safety "i"
CEI EN 60079-18/EC:2016 Explosive atmospheres Part 18: Equipment protection by encapsulation "m"
CEI EN 60079-2:2015 Explosive atmospheres Part 2: Equipment protection by pressurized enclosure "p"
CEI EN 60079-1:2015 Explosive atmospheres Part 1: Equipment protection by flameproof enclosures "d"
CEI EN 60079-1/EC:2017 Atmosfere esplosive Parte 1: Apparecchiature protette mediante custodie a prova d'esplosione "d"
CEI EN 60079-2/EC:2018 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

CENELEC - European Committee for Electrotechnical Standardization

EN 62075:2008 Audio/video@ information and communication technology equipment - Environmentally conscious design
EN 60079-18:2009 "Explosive atmospheres - Part 18: Equipment protection by encapsulation ""m"""
EN 60079-1:2007 "Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures ""d"""
EN 60079-18:2015+A1:2017 "Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure ""p"""
EN 60079-2:2007 "Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure ""p"""
EN 50021:1999 "Electrical Apparatus for Potentially Explosive Atmospheres - Type of Protection ""n"""
EN 60079-6:2007 "Explosive atmospheres - Part 6: Equipment protection by oil immersion ""o"""
EN 60079-31:2009 "Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure ""t"""

YU-JUS

JUS N.A5.786-1984 Basic environmental testing procedures. Test Ub: Robustness of terminations and integral mounting de- vices. Bending

Bureau of Indian Standards

IS/IEC 60079-2-2014 Explosive Atmospheres Part 2 Equipment Protection by Enclosure
IS/IEC 60079-1-2014 Explosive Atmospheres - Part 1 : Equipment Protection by Flameproof Enclosures
IS/IEC 60079-33-2012 Explosive Atmospheres Part 33 Equipment Protection by Special Protection 's'
IS/IEC 60079-6-2015 Explosive Atmospheres Part 6 Equipment Protection by Liquid Immersion "o"
IS/IEC 60079-11-2023 Explosive Atmospheres - Part 11 Equipment Protection by Intrinsic Safety â€œiâ€
IS/IEC 60079-7-2017 Explosive Atmospheres Part 7 Equipment Protection by Increased Safety "e"
IS/IEC 60079-5-2015 Explosive Atmospheres - Part 5 Equipment Protection by Powder Filling â€œqâ€
IS 14154-1-1996 Electrical Apparatus with Protection By Enclosure for Use in the Presence of Combustible Dusts - Part 1 : Classification for Apparatus

International Electrotechnical Commission (IEC)

IEC 62075:2008 Audio/video information and communication technology equipment – Environmentally conscious design (Edition 1.0)
IEC 60079-26:2006/COR1:2009 Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga - Corrigendum 1
IEC 60079-18:2009 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
IEC 60079-18:2014 RLV Explosive atmospheres — Part 18: Equipment protection by encapsulation “m”
IEC 60079-18:2014+AMD1:2017 CSV Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
IEC 60079-18:2014 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
IEC 60079-15 INT 1:2016 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"; Interpretation sheet 1
IEC 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
IEC 60079-6:2015+AMD1:2020 CSV Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
IEC 60079-15:2017 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
IEC 60079-5:2015 RLV Explosive atmospheres – Part 5: Equipment protection by powder filling "q"
IECEX TR 60079-15:2010 Explosive atmospheres.Part 15:Equipment protection by type of protection "n"
IEC 60079-11:2023 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-5:2015+AMD1:2022 CSV Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
IEC 60079-11:2011 RLV Explosive atmospheres – Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-2:1983 "Electrical Apparatus for Explosive Gas Atmospheres Part 2: Electrical Apparatus - Type of Protection ""P"" (Edition 3.0)"
IEC 60079-2:2014 RLV Explosive atmospheres – Part 2: Equipment protection by pressurized enclosure "p"
IEC 60079-1:2007 Explosive atmospheres - Part 1: Equipment protection by flameproof encloures "d"
IEC 60079-11/COR1:2006 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-7:2015+AMD1:2017 CSV Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
IEC 60079-1:2014 RLV Explosive atmospheres – Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-15:2010/ISH1:2016 Intrepretation sheet 1 - Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
IEC 60079-18:2009/COR1:2009 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"; Corrigendum 1
IEC 60079-2:2007 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
IEC 60079-2:2014 Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"
IEC 60079-5:2022 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
IEC 60079-18:2009 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
IEC TS 63428:2024 Guidance on material circulation considerations in environmentally conscious design

Canadian Standards Association (CSA)

CAN/CSA-C22.2 NO.60079-15-2018 Explosive atmospheres — Part 15: Equipment protection by type of protection “n” (IEC 60079-15:2017, MOD)
CAN/CSA-C22.2 No.60079-15-2016 Explosive atmospheres — Part 15: Equipment protection by type of protection “n”
CAN/CSA-C22.2 NO.60079-18-2016(R2021) Explosive atmospheres — Part 18: Equipment protection by encapsulation “m”
CAN/CSA-C22.2 NO.60079-26-2016(R2021) CAN/CSA-C22.2 No. 60079-26:16 Explosive atmospheres — Part 26: Equipment with Equipment Protection Level (EPL) Ga
CAN/CSA-C22.2 No.60079-18-2012 Explosive atmospheres — Part 18: Protection of equipment by “m” encapsulation
CAN/CSA-C22.2 No.60079-11-2011 Explosive atmospheres — Part 11: Equipment protection by intrinsic safety “i”
CAN/CSA-C22.2 No.60079-6-2017(R2022) Explosive atmospheres — Part 6: Equipment protection by liquid immersion “o”
CAN/CSA-C22.2 No.60079-5-2016 Explosive atmospheres — Part 5: Equipment protection by powder filling “q”
CSA E60079-15-02-CAN/CSA-2002(R2006) Electrical Apparatus for Explosive Gas Atmospheres - Part 15: Type of Protection"n" Second Edition
CAN/CSA-C22.2 NO.60079-7-2012 Explosive atmospheres — Part 7: Equipment protection by increased safety “e” (First Edition)
CAN/CSA-E1241-1-1-1995 Electrical apparatus for use in the presence of combustible dust Part 1: Electrical apparatus protected by enclosures Section 1: Specification for apparatus

NATO - North Atlantic Treaty Organization

STANAG 7102-2005 Environmental Protection Handling Requirements for Petroleum Handling Facilities and Equipment (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2
STANAG 7102-2013 Environmental Protection Handling Requirements for Petroleum Handling Facilities and Equipment (ED 3; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2

International Organization for Standardization (ISO)

ISO 19932-1:2025 Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental requirements
ISO 20347:2021/PRF Amd 1:2023 Personal protective equipment
ISO 28139:2019/Amd 1:2024 Equipment for crop protection

GCC Standardization Organization

GSO IEC 60079-33:2013 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
BH GSO IEC 60079-11:2024 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
BH GSO IEC 60079-7:2024 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
GSO IEC 60079-7:2007 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

American National Standards Institute （ANSI)

ANSI/ISA 60079-15-2012 Explosive atmospheres – Part 15: Equipment protection by type of protection "n" (Edition 4)
ANSI/ISA 60079-1-2009(2013) Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures “d”
ANSI/ISA 60079-5-2009(2013) Explosive Atmospheres – Part 5: Equipment Protection by Powder Filling “q”
ANSI/ISA 60079-18-2012 Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"
ANSI/ISA 60079-6-2009(2013) Explosive Atmospheres – Part 6: Equipment Protection by Oil Immersion “o”

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0806-2075-2013 Audio/video@ information and communication technology equipment - Environmentally conscious design (IEC 62075:2012); German version EN 62075:2012 + AC:2013
VDE 0820-22-1992*DIN VDE 0820-22:1992 Miniature fuses
VDE 0170-313 E*DIN IEC 60079-13:2007-11 Explosive atmospheres – Part 13: Equipment protection by pressurized room 'p'
VDE 0170-7 E*DIN IEC 60079-11:2008-04 Explosive atmospheres – Part 11: Equipment protection by intrinsic safety 'i'
VDE 0170-3 E*DIN EN 60079-2 E:2010-11 Explosive Atmospheres – Part 2: Equipment protection by pressurized enclosure “p“
VDE 0170-9 E*DIN EN 60079-18:2007-09 Explosive Atmospheres – Part 18: Equipment protection by encapsulation “m”
VDE 0170 0171-9-1988*DIN VDE 0170 0171-9:1988 Electrical apparatus for potentially explosive atmospheres; Encapsulation “m”
VDE 0170-3 E*DIN EN IEC 60079-2:2020-06 Explosive atmospheres — Part 2: Equipment protection by pressurized enclosure „p“

Underwriters Laboratories (UL)

UL 60079-15-2020 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
UL 60079-13-2022 Explosive Atmospheres - Part 13: Equipment Protection by Pressurized Room
UL 60079-15-2013 Explosive atmospheres - Part 15: Equipment protection by type of protection 'n'
UL 60079-6-2007 Explosive atmospheres - Part 6: Equipment protection by oil immersion "o"
UL 60079-33-2021 Explosive Atmospheres - Part 33: Equipment Protection by Special Protection "s"
UL 60079-11-2018 UL Standard for Safety Explosive Atmospheres �C Part 11: Equipment Protection by Intrinsic Safety "i"
UL 60079-11-2013 UL Standard for Safety Explosive Atmospheres �C Part 11: Equipment Protection by Intrinsic Safety "i" (Sixth Edition; Reprint with Revisions Through and Including March 28@ 2014)
UL 60079-15 BULLETIN-2007 UL Standard for Safety Electrical Apparatus for Explosive Gas Atmospheres Part 15: Electrical Apparatus with Type of Protection
UL 60079-6 BULLETIN-2006 "UL Standard for Safety Explosive atmospheres – Part 6: Equipment protection by oil immersion ""o"""

PL-PKN

PN-EN 60079-6-2016-02/Ap1-2021-09 E Explosive atmospheres -- Part 6: Equipment protection by liquid immersion \

Gosstandart of Russia

GOST 31610.15-2020 Explosive atmospheres. Part 15. Equipment protection by type of protection ？n？
GOST R IEC 60079-15-2010 Explosive atmospheres. Part 15. Equipment protection by type of protection «n»
GOST R IEC 60079-18-2012 Explosive atmospheres. Part 18. Equipment protection by encapsulation «m»
GOST 31610.15-2014 Explosive atmospheres. Part 15. Equipment protection by type of protection «n»
GOST 33864-2016 Energy efficiency. Equipment for heating. Environmental security and ecological safety guaranteed design
GOST R IEC 60079-13-2010 Explosive atmospheres. Part 13. Equipment protected by pressurized rooms «p»
GOST R 52350.11-2005 Electric equipment for explosive atmospheres. Part 11. Equipment protection by intrinsic safety "i"
GOST R IEC 60079-1-2008 Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures "d"
GOST R IEC 60079-2-2009 Explosive atmospheres. Part 2. Equipment protection by pressurized enclosure "p"
GOST R IEC 60079-11-2010 Explosive atmospheres. Part 11. Intrinsic safety circuit ?i?
GOST 31610.33-2014 Explosive atmospheres. Part 33. Equipment protection by special protection «s»

Instrument Society of America (ISA)

ISA 60079-15-2013 Explosive atmospheres - Part 15: Equipment protection by type of protection "n" (Edition 4; 12.12.02)

Society of Automotive Engineers (SAE)

SAE J1455-2011 Recommended Environmental Practices for Electronic Equipment Design in Heavy-Duty Vehicle Appllications
SAE J1455-2012 Recommended Environmental Practices for Electronic Equipment Design in Heavy-Duty Vehicle Appllications

Swedish Institute for Standards

SS-EN 60079-11:2007 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
SS-EN 60079-7:2016 Explosive atmospheres - Part 7: Equipment protection by increased safety ''e''
SS-EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
SS-EN 60079-6:2016 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
SS-EN IEC 60079-7 A 1 :2018 Explosive atmospheres - Part 7: Equipment protection by increased safety ''e''
SS-EN 60079-5:2008 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
SEK TS 63428:2024 Guidance on material circularity considerations in environmentally conscious design

ISA - International Society of Automation

ISA 60079-11-2009 Explosive Atmospheres – Part 11: Equipment protection by intrinsic safety “i” (12.02.01)
ISA 60079-11-2011 Explosive Atmospheres – Part 11: Equipment protection by intrinsic safety “i” (12.02.01)
ISA 60079-18-2012 "Explosive atmospheres - Part 18: Equipment protection by encapsulation ""m"" (12.23.01)"
ISA 60079-31-2009 Explosive Atmospheres – Part 31: Equipment Dust Ignition Protection by Enclosure “t” (12.10.03)
ISA 60079-1-2009 Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures “d” (12.22.01)

AT-OVE/ON

OVE EN IEC 60079-11:2020 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety \

ETSI - European Telecommunications Standards Institute

ETS 300 019-2-4 AMD1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations
PRETS 300 019-2-4-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations
ETS 300 019-1-4 PRA1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-4: Classification of Environmental Conditions Stationary Use at Non-Weatherprotected Locations
PRETS 300 019-1-4-1991 Equipment Engineering (EE); Environmental Conditions and Environmental Test for Telecommunications Equipment Part 1-4: Classification of Environmental Conditions Stationary Use at Non-Weatherprotected Locations
ETS 300 019-2-4 PRA1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations
ETS 300 019-1-4 AMD1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-4: Classification of Environmental Conditions Stationary Use at Non-Weatherprotected Locations
ETS 300 019-2-4-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations

ETSI

ETSI ETS 300 019-1-4 ed.1 (1992-02)-1992 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-4: Classification of environmental conditions; Stationary use at non-weatherprotected locations
ETSI EN 300 019-2-4 V2.1.2 (1999-09)-1999 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations
ETSI ETS 300 019-2-4/A1 ed.1 (1997-06)-1997 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations
ETSI ETS 300 019-2-4 ed.1 (1994-05)-1994 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations
ETSI ETS 300 019-1-4/A1 ed.1 (1997-06)-1997 Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 1-4: Classification of environmental conditions; Stationary use at non-weatherprotected locations

European Telecommunications Standards Institute (ETSI)

ETSI PRETS 300 019-2-3-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-3: Specification of Environmental Tests Stationary Use at Weatherprotected Locations
ETSI EN 300 019-2-4:2002 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests; Stationary Use at Non-Weatherprotected Locations (V2.2.1)
ETSI EN 300 019-2-4:1999 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests; Stationary Use at Non-Weatherprotected Locations (V2.1.2)
ETSI PRETS 300 019-2-4-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations
ETSI ETS 300 019-1-3-1992 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-3: Classification of Environmental Conditions Stationary Use at Weatherprotected Locations
ETSI ETS 300 019-1-4-1992 Introductory Element Equipment Engineering (EE); Environmental Conditions and Environmental Test for Telecommunications Equipment Part 1-4: Classification of Environmental Conditions Stationary Use at Non-Weatherprotected Locations
ETSI ETS 300 019- 2-3-1994 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 2-3: Specification of Environmental Tests Stationary Use at Weatherprotected Locations
ETSI PRETS 300 019-1-4-1991 Equipment Engineering (EE); Environmental Conditions and Environmental Test for Telecommunications Equipment Part 1-4: Classification of Environmental Conditions Stationary Use at Non-Weatherprotected Locations
ETSI ETS 300 019-2-4 AMD1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations
ETSI ETS 300 019-1-4 PRA1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-4: Classification of Environmental Conditions Stationary Use at Non-Weatherprotected Locations
ETSI ETS 300 019-2-3 PRA1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests Stationary Use at Weatherprotected Locations
ETSI ETS 300 019-1-3 PRA1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-3: Classification of Environmental Conditions Stationary Use at Weatherprotected Locations
ETSI PRETS 300 019-1-3-1991 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment Part 1-3: Classification of Environmental Conditions Stationary Use at Weatherprotected Locations
ETSI ETS 300 019-1-3 AMD1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-3: Classification of Environmental Conditions Stationary Use at Weatherprotected Locations
ETSI ETS 300 019-2-4 PRA1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-4: Specification of Environmental Tests Stationary Use at Non-Weatherprotected Locations
ETSI ETS 300 019-1-4 AMD1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 1-4: Classification of Environmental Conditions Stationary Use at Non-Weatherprotected Locations
ETSI ETS 300 019-2-3 AMD1-1997 Equipment Engineering (EE); Environmental Conditions and Environmental Tests for Telecommunications Equipment; Part 2-3: Specification of Environmental Tests Stationary Use at Weatherprotected Locations