Dissolution below the content

Dissolution below the content, Total:76 items.

The international standard classification for "Dissolution below the content" includes: Cement. Gypsum. Lime. Mortar , Rubber , Fertilizers .

The Chinese standard classification for "Dissolution below the content" includes: Papermaking in general , Cement , Building material raw material ore , Daily use ceramics products , Other generating equipment , Basic standards and general methods on chemical fertilizers .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 2677.6-1994 Fibrous raw material—Determination of solvent extractives
GB/T 39706-2020 Test method for dissolution rate and quantity of SO42- released from gypsum

Taiwan Provincial Standard of the People's Republic of China

CNS 9364-1988 Method of Test for Low Frequency(Below 3 MHz) Electrical Connectors (TP - 5 Contact Insertion and Removal Forces)
CNS 9241-1982 Method of Test for Low Frequency(Below 3 MHz) Electrical Connectors(TP - 37 Contact Separating Force)

Professional Standard - Petrochemical Industry

SH/T 1539-2007 Rubber styrene-butadiene(SBR)-Determination of total extracts

Guangxi Provincial Standard of the People's Republic of China

DB45/T 1544-2017 Rapid determination of cadmium, lead, copper and arsenic in soil by anodic stripping voltammetry
DB45/T 1545-2017 Rapid determination of cadmium, lead, copper and arsenic in water quality by anodic stripping voltammetry
DB45/T 1546-2017 Rapid determination of cadmium, lead, copper and arsenic in grains by anodic stripping voltammetry

Professional Standard - Railway

TB/T 2328.18-1992 Test method for powder content of railway gravel and ballast with particle size below 0.1mm

Professional Standard - Commodity Inspection

SN/T 0561-1996 Determination of acid-soluble iron content in natural graphite for export - Flame atomic absorption spectrometric method
SN/T 0298-1993 Rules for the inspection of micor hydro generator equipments (12 kW and below the 12 kW) for export
SN/T 2510-2010 Test method of lead and cadmium extracted from export and import domestic ceramicware
SN/T 0873-2000 Fast test method for lead and cadmium extracted from ceramics for import and export

Zhejiang Provincial Standard of the People's Republic of China

DB33/T 414-2003 Regulations for the inspection of three-strand mulberry spun silk for export below 150Nm

Anhui Provincial Standard of the People's Republic of China

DB34/T 4881-2024 Rapid Quantitative Determination of Cadmium Content in Cereals and Their Products Electrochemical anodic stripping voltammetry

Professional Standard - Agriculture

NY/T 1973-2021 Determination of L-malic acid and D-malic acid in fruits and their derived products.High performance liquid chromatography
NY/T 1973-2010 Water-soluble fertilizers-Determination of water insoluble matter content and pH
NY/T 1115-2006 Water-soluble fertilizers-Determination of water insoluble matter content

Group Standards of the People's Republic of China

T/SACE 020-2021 Low-content acetic acid solution

Ente Nazionale Italiano di Unificazione

UNI EN 13786:2004 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
UNI EN 13786:2009 Automatic change-over valves having a maximum otulet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures

National Association of Corrosion Engineers (NACE)

NACE Paper 08019-2008 Measurement of Leachable Chloride Content from Coatings Applied to Stainless Steel

Korean Agency for Technology and Standards (KATS)

KS M 7039-2002 Testing method for organic solvent extractives in pulp
KS M 7039-1985 Testing method for organic solvent extractives in pulp
KS M 7039-2000 Testing method for organic solvent extractives in pulp
KS D 1673-5-2023 Iron and steel — ICP atomic emission spectrometric method — Part 5: Determination of niobium content — Dissolution in phosphoric and sulfuric acids or Dissolution in acids and fusion with potassium di

AR-IRAM

IRAM 15 702-1963 Determination of total solid content, soluble water solid content and insoluble water solid content in industrial fruits and vegetables

South African Bureau of Standard

SANS 6099:1987 Sodium chloride (in the presence of potassium chloride) content of solutions
SANS 6047:2007 Water - Dissolved oxygen content
SANS 5213:2005 Water - Dissolved solids content
SANS 5296:1975 Calcium chloride content of solutions
SANS 5063:1975 Potassium chloride content of solutions
SANS 5386:1987 Potassium in solutions, detection
SANS 5018:1975 Dextrose content of solutions
SANS 5287:1975 Calcium in solutions, detection

Gosstandart of Russia

GOST R 52180-2003 Drinking water. Determination of elements content by stripping voltammetric method
GOST 31866-2012 Drinking water. Determination of elements content by stripping voltammetric method

BR-ABNT

ABNT NBR 14361-2008 Insumes - Tanning agents - Determination of soluble and insoluble solides content (method by vaccum

PT-IPQ

E 175-1965 Black pigment. Measurement of insoluble components and carbon content in pigments
E 171-1965 Chrome alloy green paint. The percentage of barium sulfate and the content of insoluble silicic acid materials in the pigment

PL-PKN

PN C04129-1970 Petroleum products Determination ol contents of aromatic hydrocarbons under 2% in products with end point max 300°C
PN C04586 ArkusZ05-1973 Water and waste water Tests for iron Determination of total anddissolved iron by EDTA method Rang?: above 10 mg/l

American Water Works Association (AWWA)

AWWA WQTC62366 Measuring Arsenic in Groundwater and Wastewater Using Anodic Stripping Voltammetry
AWWA WQTC62611 Monitoring Groundwater Aquifers in Anticipation of the Groundwater Rule

YU-JUS

JUS H.G8.025-1980 Reagents. Hydrochhric acid. Determination of lead, copper, zine and cadmium contents. Anodic strip- ping voltammetry method
JUS H.G8.040-1981 Reagents. Sulphuric acid. Determination of lead, copper, zine and cadmium contents. Anodicstripping voltammetry method

International Organization for Standardization (ISO)

ISO 7513:1990/Amd 1:2012 Instant tea in solid form - Determination of moisture content (loss in mass at 103 °C); Amendment 1
ISO 7534:1985 Instant coffee; Determination of insoluble matter content

German Institute for Standardization

DIN EN 13786:2004 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
DIN EN 12457-3:2021-03 Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 ...

Standards Norway

NS-EN 13786:2004+A1:2008 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures

American Society for Testing and Materials (ASTM)

ASTM C1334-96(2000) Standard Specification for Uranium Oxides with a ²³⁵ U Content of Less Than 5% for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
ASTM C1334-05e1 Standard Specification for Uranium Oxides with a ²³⁵ U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
ASTM C1334-05(2022) Standard Specification for Uranium Oxides with a ²³⁵ U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
ASTM C1334-05 Standard Specification for Uranium Oxides with a ²³⁵ U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
ASTM C1334-05(2010) Standard Specification for Uranium Oxides with a ²³⁵ U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide

BELST

STB 1315-2002 Products tinned. Methods of definition contents of tin and lead by stripping voltammetric analysis on analyzers of a type ТА

British Standards Institution (BSI)

BS 265:1936 Cold rolled brass sheets, strip and foil, copper content 61.5 per cent minimum and under 64 per cent maximum
BS 7231-1:1990 Body measurements of boys and girls from birth up to 16.9 years - Information in the form of tables

GCC Standardization Organization

GSO ISO 7534:1997 INSTANT COFFEE – DETERMINATION OF INSOLUBLE MATTER CONTENT

Spanish Association for Standardization (UNE)

UNE-ISO 14869-1:2007 Soil quality. Dissolution for the determination of total element content. Part 1: Dissolution with hydrofluoric and perchloric acids. (ISO 14869-1:2001)
UNE 26-364-1986 Collective transportation vehicles with small physical capacity. It can accommodate up to 9 people including the driver's seat.

Association Francaise de Normalisation

NF T30-212:1981 Paints and varnisches. Determination of soluble metal content. Determination of soluble antimony content.
NF T30-211:1981 Paints and varnishes. Determination of soluble metal. Preparation of soluble lead content.
NF T30-213:1981 Paints and varnishes. Determination of soluble metal content. Determination of soluble barium content.
NF V05-222:1986 Instant coffee. Determination of insoluble matter content.
NF U42-771:1986 Fertilizers. Determination of the sulfuric anhydrique content total and soluble.
NF T30-225:1983 Paints and varnishes. Determination of soluble metal content. Determination of water soluble chromium (vi).
NF V18-250*NF EN 16277:2012 Animal feeding stuffs - Determination of mercury by cold-vapour atomic absorption spectrometry (CVAAS) after microwave pressure digestion (extraction with 65 % nitric acid and 30 % hydrogen peroxide).