Standard Curve Requirements

Standard Curve Requirements, Total:196 items.

The international standard classification for "Standard Curve Requirements" includes: Noise with respect to human beings , Alcoholic beverages , Non-metalliferous minerals , Optical measuring instruments .

The Chinese standard classification for "Standard Curve Requirements" includes: Acoustic Measurement , Distilled liquors , Other non-metal mine product , Optical testing instrument .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 36063-2018e Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/T 45335-2025 Determination of the content of attapulgite phase—X-ray diffraction standard curve method
GB/T 22046-2025 Quality requirements for product of geographical indication—Yanghe daqu
GB/T 4963-2007 Acoustics—Normal equal-loudness-level contours
GB/T 36063-2018(英文版) Nanotechnology: Standard Raman frequency shift curves for Raman spectroscopy calibration

Group Standards of the People's Republic of China

T/GDWCA 0073-2020 Assessment requirements for forerunner standard - Telecom cable
T/GDWCA 0080-2021 Assessment requirements for forerunner standards—Wing wire
T/GDWCA 0072-2020 Assessment requirements for forerunner standard - USB/HDMI data transmission line
T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations
T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers
T/SXCAA 012-2021 Guidelines for Quality Control of Linear Calibration Curves

Professional Standard - Electron

SJ/T 31021-1994 Requirements of Readiness and Methods of Inspection and Assessment for Optical Curve Grinding Machines

Professional Standard-Ships

CB* 3010-1978 Surface Quality Requirements for Cast Steel Crank Throws

German Institute for Standardization

DIN ISO 226 E:2001-11 Acoustics - Normal equal-loudness-level contours
DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04
DIN EN ISO 20768/A1:2024 Vapour products - Routine analytical vaping machine - Definitions and standard conditions - Amendment 1: Correction of puff profile requirements (ISO 20768:2018/DAM 1:2024); German and English version EN ISO 20768:2021/prA1:2024
DIN 48051-1:1959-09 Power current overhead lines; bent insulator spindles, standard design
DIN EN ISO 20768/A1 E:2024-09 Draft Document - Vapour products - Routine analytical vaping machine - Definitions and standard conditions - Amendment 1: Correction of puff profile requirements (ISO 20768:2018/DAM 1:2024); German and English version EN ISO 20768:2021/prA1:2024
DIN 19590-1:1990-03 Gully tops class A 15, quadratic; summary
DIN 1317-1:1957 Standard Tuning; Standard Musical Pitch
DIN 19593-1:1990-03 Gully tops class B 125, quadratic; summary

Association Francaise de Normalisation

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours

International Organization for Standardization (ISO)

ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2003 Acoustics - Normal equal-loudness-level contours

Gosstandart of Russia

GOST 9735-1987 Profile grinders. Standards of accuracy
GOST 12.2.113-1986 Occupational safety standards system. Crank presses. Safety requirements
GOST 12.2.116-1986 Occupational safety standards system. Three- and four-roll plate-bending machines. Safety requirements
GOST ISO 11485-2-2016 Curved glass. Technical requirements
GOST R 55989-2014 Trunk gas pipelines. Design standard for pressure over 10 MPa. Principal requirements

British Standards Institution (BSI)

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
BS 2769-2-2.10:1984 Hand-held electric motor-operated tools. Particular requirements-Specification for jig saws
BS EN 50144-2-10:1996 Safety of hand-held electric motor operated tools-Particular requirements for jig saws
BS EN 3373-014:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard
24/30505086 DC BS EN IEC 61400-16 Standard file format for sharing power curve information

Ente Nazionale Italiano di Unificazione

UNI 7043:1972 Lead bends. Dimensions and requirements.
UNI EN ISO 9073-7:2000 Textiles - Test methods for nonwovens - Determination of bending length

American Society for Testing and Materials (ASTM)

ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM E561-19e1 Standard Test Method for K R Curve Determination
ASTM E561-20 Standard Test Method for K R Curve Determination
ASTM E561-21 Standard Test Method for K R Curve Determination
ASTM E561-22 Standard Test Method for K R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-08e1 Standard Test Method for K-R Curve Determination
ASTM E561-19 Standard Test Method for K R Curve Determination
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM E561-15 Standard Test Method for K R Curve Determination
ASTM E561-08 Standard Test Method for K-R Curve Determination
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E561-15a Standard Test Method for K R Curve Determination
ASTM E561-05e1 Standard Test Method for K-R Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM E561-10 Standard Test Method for K-R Curve Determination
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM B250/B250M-16 Standard Specification for General Requirements for Wrought Copper Alloy Wire
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM B250/B250M-19 Standard Specification for General Requirements for Wrought Copper Alloy Wire
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM B250/B250M-01 Standard Specification for General Requirements for Wrought Copper Alloy Wire
ASTM A752-04(2010) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM B250/B250M-01e1 Standard Specification for General Requirements for Wrought Copper Alloy Wire
ASTM A555/A555M-21 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM A555/A555M-23 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
ASTM A555/A555M-05 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
ASTM A752M-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E561-23 Standard Test Method for K R Curve Determination
ASTM A752-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
ASTM A555/A555M-16 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
ASTM A752M-93(1998) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM C1464-00 Standard Specification for Bent Glass
ASTM C1464-16 Standard Specification for Bent Glass
ASTM C1464-21 Standard Specification for Bent Glass
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E1541-98(2003) Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM C1464-06 Standard Specification for Bent Glass
ASTM C1464-06(2011) Standard Specification for Bent Glass
ASTM D3883-04(2008) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows

Korean Agency for Technology and Standards (KATS)

KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours

ICEA - Insulated Cable Engineers Association Inc.

S-109-709-2005 Standard for Distribution Frame-Wire Technical Requirements
S-109-709-2011 STANDARD FOR DISTRIBUTION FRAME-WIRE TECHNICAL REQUIREMENTS
S-89-648-2000-2002 Standard for Aerial Service Wire Technical Requirements
S-89-648-2006-2007 Standard for Aerial Service Wire Technical Requirements
S-92-675-2005-2005 Standard for Coaxial and Coaxial/Twisted Pair Composite Aerial Service Wires Technical Requirements

The American Road & Transportation Builders Association

AASHTO R 75-2016(R2020) Standard Practice for Developing a Family of Curves
AASHTO R 75-2016(2020) Standard Practice for Developing a Family of Curves
AASHTO T 272-2004 Standard Method of Test for Family of Curves---One-Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO R 62-2013(2021) Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
AASHTO R 62-2013(R2017) Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
AASHTO PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)

AASHTO - American Association of State Highway and Transportation Officials

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)
PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)
R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures

Insulated Cable Engineers Association （ICEA)

ICEA S-109-709-2011 STANDARD FOR DISTRIBUTION FRAME-WIRE TECHNICAL REQUIREMENTS
ICEA S-89-648-2000 Standard for Aerial Service Wire Technical Requirements
ICEA S-109-709-2005 Standard for Distribution Frame-Wire Technical Requirements

SE-SIS

SIS SMS 2027-1975 Dust separating. Standard curves for dust
Nr 39-1992 Curve electronics according to Swedish standards

Society of Automotive Engineers (SAE)

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991
SAE ARP958-1968 BROADBAND ELECTROMAGNETIC INTERFERENCE MEASUREMENT ANTENNAS; STANDARD CALIBRATION REQUIREMENTS AND METHODS

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles
BH GSO ASTM F1874:2022 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
BH GSO ASTM C1464:2022 Standard Specification for Bent Glass

GCC Standardization Organization

GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles
GSO ASTM E2218:2024 Standard Test Method for Determining Forming Limit Curves
BH GSO ASTM E2218:2024 Standard Test Method for Determining Forming Limit Curves
GSO ASTM F1874:2021 Standard Test Method for Bend Testing of Needles Used in Surgical Sutures
GSO ASTM C1464:2021 Standard Specification for Bent Glass

American National Standards Institute （ANSI)

ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI/TIA/EIA-568-B.1-1-2001 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 1 – Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
ANSI/ICEA S-91-674-2011 Standard for Coaxial and Coaxial/Twisted Pair Composite Buried Service Wires Technical Requirements
ANSI/TIA/EIA-568-B.1-2001 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements

IT-UNI

UNI S 195-1943 Insulation material standards. Numerical charts and graphs

Institute of Electrical and Electronics Engineers (IEEE)

IEEE PC93.3/D16.1, August 2015 IEEE Draft Standard for the Requirements for Power Line Carrier Line Traps
IEEE C93.3 IEEE Draft Standard for the Requirements for Power Line Carrier Line Traps
IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions
IEEE PC93.3/D17, December 2015 IEEE Draft Standard for the Requirements for Power Line Carrier Line Traps
IEEE/ANSI C93.3-1995 American National Standard--Requirements for Power-Line Carrier Line Traps
IEEE Std C93.3-1995 American National Standard Requirements for Power-Line Carrier Line Traps
IEEE PC93.3/D17.4, August 2016 IEEE Approved Draft Standard for the Requirements for Power-Line Carrier Line Traps (30-500 kHz)
IEEE PC93.3/D17.3, July 2016 IEEE Draft Standard for the Requirements for Power-Line Carrier Line Traps (30-500 kHz)
PC93.3/D17.3, July 2016 IEEE Draft Standard for the Requirements for Power-Line Carrier Line Traps (30-500 kHz)
IEEE P1925.1/D1, October 2024 IEEE Draft Standard for Energy Efficient Dynamic Line Rate Transmission System
IEEE PC93.3/D17.1, June 2016 IEEE Draft Standard for the Requirements for Power-Line Carrier Line Traps (30-500 kHz)
PC93.3/D17.1, June 2016 IEEE Draft Standard for the Requirements for Power-Line Carrier Line Traps (30-500 kHz)
IEEE Std C93.3-2017 IEEE Standard Requirements for Power-Line Carrier Line Traps (30 kHz to 500 kHz)

Canadian Standards Association (CSA)

CSA T568.1-1-2005(R2010) Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius
CSA T568.1-1-2005 Commercial building telecommunications cabling standard — Part 1: General requirements — Addendum 1 — Minimum 4-pair UTP and 4-pair ScTP patch cable bend radius (First Edition)
CSA T568.1-2005(R2010) Commercial building telecommunications cabling standard — Part 1: General requirements

Standard Association of Australia （SAA）

AS 1469:1973 Criteria curves for rating noise and establishing acoustic environment

RTCA - RTCA@ Inc.

RTCA DO-350A VOLUME 1 & 2-2016 Safety and Performance Requirements Standard for Baseline 2 ATS Data Communications (Baseline 2 SPR Standard)
RTCA DO-280A-2004 Interoperability Requirements Standard for ATN Baseline 1 (INTEROP ATN B1) (***NO LONGER AVAILABLE***)

PK-PSQCA

PS 122-1985 PAKISTAN STANDARD METHOD FOR THE DETERMINATION OF CRIMP OF YARN IN FABRIC

ETSI - European Telecommunications Standards Institute

ETR 038-1992 Business Telecommunications (BT); Open Network Provision (ONP) Technical Requirements Standardisation Requirements for ONP Leased Lines
ETR 087-1993 Business Telecommunications (BT); Open Network Provision (ONP) Technical Requirements; Standardisation Requirements for ONP Leased Lines Higher Order Leased Lines

Swedish Institute for Standards

ASTM A752-10 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
ASTM F1832-11 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM A752M-10 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0605-22-2004*DIN EN 61386-22:2004 Special requirements for pipeline systems for power and information installations - Curved pipeline systems

American Society of Mechanical Engineers (ASME)

ASME PTB-9-2014 ASME Pipeline Standards Compendium

US-FCR

FCR AF M86-2 IMC 80-2-1980 STANDARD FACILITY REQUIREMENTS
FCR AF M86-2 CHANGE 5-1977 STANDARD FACILITY REQUIREMENTS
FCR AF M TAC 86-2 SUPP 1-1984 STANDARD FACILITY REQUIREMENTS
FCR AF M86-2 IMC 84-1-1984 STANDARD FACILITY REQUIREMENTS
FCR AF M86-2 IMC 80-3-1980 STANDARD FACILITY REQUIREMENTS
FCR AF M86-2 IMC 83-1-1983 STANDARD FACILITY REQUIREMENTS
FCR AF M86-2 CHANGE 7-1979 STANDARD FACILITY REQUIREMENTS
FCR AF I32-1024-1994 STANDARD FACILITY REQUIREMENTS
FCR AF M86-2-1973 STANDARD FACILITY REQUIREMENTS
FCR AF M86-2 CHANGE 6-1979 STANDARD FACILITY REQUIREMENTS
FCR AF M86-2 CHANGE 8-1980 STANDARD FACILITY REQUIREMENTS

RO-ASRO

STAS 6901-1978 Psycho-physiological acou stics STANDARD CURVES OF EQUAL LOUDNESS LEVEL AND RELATIONS BETWEEN SOUND PRESSURE LEVELS

ESDU - Engineering Sciences Data Unit

ESDU 01011-2001 Compendium of curves and approximating algebraic functions
ESDU 01011 B-2007 Compendium of curves and approximating algebraic functions.
ESDU 01011 A-2002 Compendium of curves and approximating algebraic functions

GM North America

GM GM1002M-1999 Standard Requirements - Plastics

United States Navy

NAVY MIL-HDBK-2053-1995 REQUIREMENTS FOR EMPLOYING STANDARD BATTERIES

YU-JUS

JUS U.J1.070-1986 Fire protection. Standard time-temperature curve in fire resistance test furnaces for constructions

National Association of Corrosion Engineers (NACE)

NACE RP0197-1997 Standard Format for Computerized Electrochemical Polarization Curve Data Files

Danish Standards Foundation

DS/EN 28 750:1992 Spring-type straight pins - Coiled, standard duty

(U.S.) Telecommunications Industries Association

TIA/EIA-568-B.1 ERTA-2001 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements

TIA - Telecommunications Industry Association

TIA/EIA-568-B.1-1-2001 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 1 - Minimum 4-Pair UTP and 4-Pair ScTP Patch Cable Bend Radius (Addendum 1 to TIA/EIA-568-B.1)

AT-ON

ONORM S 4113-1984 Lines; requirements, testing, marking of conformity

ETSI

ETSI ETR 087 ed.1 (1993-06)-1993 Business Telecommunications (BT); Open Network Provision (ONP) technical requirements; Standardisation requirements for ONP leased lines Higher order leased lines