Infrared peaks of alkynes

Infrared peaks of alkynes, Total:28 items.

The international standard classification for "Infrared peaks of alkynes" includes: Accessories .

The Chinese standard classification for "Infrared peaks of alkynes" includes: Semiconductor emitting device , Broadcasting and television network in general .

Guangdong Provincial Standard of the People's Republic of China

DB44/T 934-2011 Determination of Aromatics and Olefins in Motor Gasoline by Fourier Transform Mid-Infrared Spectroscopy

DB35/T 1177-2011 Determination of Hydrocarbon Impurities in Dissolved Acetylene by Gas Chromatography

SH/T 1783-2016 Determination of trace alkynes and dienes in isoprene for industrial use by gas chromatography

SH/T 1145-1992 Determination of α-alkyne content in cracked C4 for industrial use (silver nitrate method)

SJ 2658.12-1986 Methods of Measurement for Semiconductor Infrared Diodes - Methods of Measurement for Peak Emission Wavelength and Spectral Half Width
SJ/T 2658.12-2015 Measuring method for semiconductor infrared-emitting diode. Part 12: Peak-emission wavelength and spectral radiant bandwidth

JUS H.F8.232-1986 Gases. Determination of hydrocarbons content. Infrared spectrophotometric method

ESDU 86001-1986 Vapour pressures and critical points of liquids. Part 2C: alkadienes and alkynes.
ESDU 87022-1987 Orthobaric densities and molar volumes of liquids. Part 2B: alkadienes and alkynes.

ASTM UOP542-88 Trace Diolefins, Acetlyenes and Non-Condensable Hydrocarbons in LPG by GC
ASTM UOP841-83 Trans Olefins in Fatty Acids, Esters or Triglycerides by IR Spectroscopy
ASTM D5576-00(2021)e1 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
ASTM D6805-02(2016) Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions
ASTM D5576-00(2006) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
ASTM D5576-00 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectroscopy (FT-IR)
ASTM D5576-00(2013) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

KS D ISO 15349-1-2005(2015) Unalloyed steel－Determination of low carbon content－Part 1：Infrared absorption method after combustion in an electric resistance furnace(by peak separation)
KS L 2013-1978(1996) ABSORBENT GLASS OF INFRARED RAY FOR OPTICS

JIS G 1211-4 AMD 2:2017 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 2)
JIS G 1211-4:2011 Iron and steel -- Determination of carbon content -- Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating
JIS G 1211-4 AMD 1:2013 Iron and steel.Determination of carbon content.Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 1)

ASTM F815-88(1993)e1 Test Method for Detection of Epitaxial Spikes (Withdrawn 1999)
BS 4181-1:1985 Identification of rubbers by infra-red spectrometry-Method for identification of hydrocarbon, chloroprene, nitrile and chlorosulphonated polyethylene rubbers

BS EN 60240-1:1994 Characteristics of electric infra-red emitters for industrial heating. Short wave infra-red emitters