Hypergraph 9

Hypergraph 9, Total:231 items.

The international standard classification for "Hypergraph 9" includes: .

The Chinese standard classification for "Hypergraph 9" includes: .

未注明发布机构

German Institute for Standardization

DIN EN 61788-9:2006 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors (IEC 61788-9:2005); German version EN 61788-9:2005
DIN EN 60617-9:1997 Graphical symbols for diagrams - Part 9: Telecommunications; switching and peripheral equipment (IEC 60617-9:1996); German version EN 60617-9:1996
DIN EN 60617-9:1997-08 Graphical symbols for diagrams - Part 9: Telecommunications; switching and peripheral equipment (IEC 60617-9:1996); German version EN 60617-9:1996
DIN EN 13108-9:2016 Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL); German version EN 13108-9:2016
DIN 4000-9:2001 Tabular layouts of article characteristics - Part 9: Pins, rivets, split pins and keys
DIN ISO 10110-9:2016 Optics and photonics - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating (ISO 10110-9:2016)
DIN EN 13108-9:2016-12 Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL); German version EN 13108-9:2016 / Note: Applies in conjunction with DIN EN 13108-20 (2016-12), DIN EN 13108-21 (2016-12).
DIN 85005-9:1999 Ships and marine technology - Graphical symbols for technical documentation - Part 9: Suction- and discharge sockets
DIN EN 61850-9-2:2012 Communication networks and systems for power utility automation - Part 9-2: Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3 (IEC 61850-9-2:2011); English version EN 61850-9-2:2011
DIN EN ISO 10893-9:2011 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011); German version EN ISO 10893-9:2011
DIN EN 61557-9:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems (IEC 61557-9:2014); German ve
DIN 85005-9:1999-11 Ships and marine technology - Graphical symbols for technical documentation - Part 9: Suction- and discharge sockets
DIN ISO 10110-9:2000 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating (ISO 10110-9:1996)

International Organization for Standardization (ISO)

ISO 7870-9:2020 Control charts — Part 9: Control charts for stationary processes
ISO 14617-9:2002 Grahical symbols for diagrams - Part 9: Pumps, compressors and fans
ISO 26429-9:2009 Digital cinema (D-cinema) packaging - Part 9: Asset mapping and file segmentation
ISO 7010:2011/Amd 9:2018 Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 9
ISO/IEC 19794-9:2011 Information technology - Biometric data interchange formats - Part 9: Vascular image data
ISO 10110-9:2016 Optics and photonics - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating
ISO 10110-9:1996 Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating
ISO/IEC 39794-9:2021 Information technology -- Extensible biometric data interchange formats-- Part 9:Vascular image data
ISO/IEC 15944-9:2015 Information technology - Business Operational View - Part 9: Business transaction traceability framework for commitment exchange
ISO 26428-9:2009 Digital cinema (D-cinema) distribution master - Part 9: Image pixel structure level 3 - Serial digital interface signal formatting
ISO 10893-9:2011 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
ISO/IEC 8859-9:1989 Information processing; 8-bit single-byte coded graphic character sets; part 9: latin alphabet No. 5
ISO 4126-9:2008 Safety devices for protection against excessive pressure - Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices
ISO/IEC 18477-9:2016 Information technology - Scalable compression and coding of continuous-tone still images - Part 9: Alpha channel coding

Lithuanian Standards Office

LST EN 61788-9-2005 Superconductivity. Part 9: Measurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors (IEC 61788-9:2005)
LST EN ISO 10893-9:2011 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011)

SCC

IEC 60617-9:1983 Graphical symbols for diagrams. Part 9: Telecommunications: Switching and peripheral equipment.
DANSK DS/ISO 7870-9:2020 Control charts – Part 9: Control charts for stationary processes
DANSK DS/ISO 14617-9:2006 Graphical symbols for diagrams - Part 9: Pumps, compressors and fans
CEI EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
UNE-EN 60617-9:1997 GRAPHICAL SYMBOLS FOR DIAGRAMS. PART 9: TELECOMMUNICATIONS. SWITCHING AND PERIPHERAL EQUIPMENT.
DANSK DS/EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
IEC 60117-9:1968 Recommended graphical symbols - Part 9: Telephony, telegraphy and transducers
NS-EN 13108-9:2016 Bituminous mixtures — Material specifications — Part 9: Asphalt for Ultra-Thin Layer (AUTL)
DANSK DS/EN 13108-9:2016 Bituminous mixtures – Material specifications – Part 9: Asphalt for Ultra-Thin Layer (AUTL)
AENOR UNE-EN 60617-9:1997 Graphic symbols for diagrams. Part 9: Telecommunications: Switching equipment and peripherals.
IEC 60117-9A:1969 Supplement A - Recommended graphical symbols - Part 9: Telephony, telegraphy and transducers
IEC 60117-9C:1976 Supplement C - Recommended graphical symbols - Part 9: Telephony, telegraphy and transducers
DIN EN 13108-9 E:2013 Draft Document - Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL); German version prEN 13108-9:2013
AENOR UNE-EN 13108-9:2018 Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL)
IEC 60117-9B:1971 Supplement B - Recommended graphical symbols - Part 9: Telephony, telegraphy and transducers
UNE 60670-9:2005 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 9: Previous tests of the supply and commissioning
DIN ISO 10110-9 E:2016 Draft Document - Optics and photonics - Preparation of drawings for optical elements and systems - Part 9: Surface treatment and coating (ISO/FDIS 10110-9:2016); Text in German and English
CSA ISO/IEC 19794-9:2019 Information technology — Biometric data interchange formats — Part 9: Vascular image data
CEI 20-20/9:1996 Cables insulated with polyvinyl chloride with rated voltage not exceeding 450/750 V - Part 9: Sheathless cables for low temperature installation
CEI EN IEC 60352-9:2024 Solderless connections – Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance
NS-ISO/IEC 19794-9:2011 Information technology - Biometric data interchange formats - Part 9: Vascular image data
ISO/IEC 13818-1:2015/FDAmd 9 Information technology — Generic coding of moving pictures and associated audio information — Part 1: Systems — Amendment 9: Ultra-low latency and 4k and higher resolution support for transport of JPEG 2000 video
DANSK DS/ISO/IEC 19794-9:2012 Information technology - Biometric data interchange formats - Part 9: Vascular image data

CENELEC - European Committee for Electrotechnical Standardization

EN 60617-9:1996 Graphical Symbols for Diagrams Part 9: Telecommunications: Switching and Peripheral Equipment
EN 50341-2-9:2015 Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland

Association Francaise de Normalisation

NF C31-888-9*NF EN 61788-9:2005 Superconductivity - Part 9 : measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors.
NF EN 61788-9:2005 Superconductivity - Part 9: measurements for massive high-temperature superconductors - Residual flux density of coarse-grained oxide superconductors
NF P98-819-9*NF EN 13108-9:2016 Bituminous mixtures - Material specifications - Part 9 : asphalt for ultra-thin layer (AUTL)
NF EN 13108-9:2016 Mélanges bitumineux - Spécifications pour le matériau - Partie 9 : bétons bitumineux pour couches ultra-minces (BBUM)
NF S10-008-9*NF ISO 10110-9:2016 Optics and photonics - Preparation of drawings for optical elements and systems - Part 9 : surface treatment and coating
NF ISO/IEC 8859-9:1992 Information processing - Single-byte graphic character sets - Part 9: Latin alphabet number 5
NF A49-785-9*NF EN ISO 10893-9:2011 Non-destructive testing of steel tubes - Part 9 : automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes
NF ISO 10110-9:2016 Optics and photonics - Guidance on drawings for optical elements and systems - Part 9: surface treatment and coating

International Electrotechnical Commission (IEC)

IEC 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
IEC 60352-9:2024 Solderless connections - Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance

KR-KS

KS Q ISO 7870-9-2023 Control charts — Part 9: Control charts for stationary processes
KS C IEC 61788-9-2016 Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors
KS P ISO TR 16840-9-2017 Wheelchair seating ─ Part 9: Clinical interface pressure mapping guidelines for seating
KS B ISO 10893-9-2023 Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes

European Committee for Electrotechnical Standardization（CENELEC）

EN 61788-9:2005 Superconductivity Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
EN IEC 60352-9:2024 Solderless connections - Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance

British Standards Institution (BSI)

BS EN 60617-9:1996(1998)*IEC 617-9:1996 Graphical symbols for diagrams — Part 9 : Telecommunications : switching and peripheral equipment
BS EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
BS 3939 Pt.9:1985 Guide for graphical symbols for electrical power, telecommunications and electronics diagrams. Telecommunications: switching and peripheral equipment
BS 6840-9:1987(1999)*IEC 268-9:1977
BS 5760-9:1992*IEC 1078:1991 Reliability of systems, equipment and components Part 9 . Guide to the block diagram technique
BS 6914-9:1996 Terminology (including definitions of dimensions and symbols) for earth-moving machinery - Terminology and commercial specifications for tractor-scrapers
BS PL 9:2005(2011)
BS ISO 10110-9:1996 Optics and optical instruments - Preparation of drawings for optical elements and systems - Surface treatment and coating

Danish Standards Foundation

DS/ISO 14617-9:2006 Graphical symbols for diagrams - Part 9: Pumps, compressors and fans
DS/EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
DS/ISO/IEC 19794-9:2013 Information technology - Biometric data interchange formats - Part 9: Vascular image data
DS/ISO/IEC 8859-9:1999 Information technology - 8-bit single-byte coded graphic character sets - Part 9: Latin alphabet No. 5

Japanese Industrial Standards Committee (JISC)

JIS Z 8617-9:2008 Graphical symbols for diagrams -- Part 9: Pumps, compressors and fans
JIS C 0617-9:1999 Graphical symbols for diagrams -- Part 9: Telecommunications: Switching and peripheral equipment
JIS C 0617-9:2011 Graphical symbols for diagrams -- Part 9: Telecommunications: Switching and peripheral equipment
JIS Z 8617-9 AMD 1:2023 Graphical symbols for diagrams -- Part 9: Pumps, compressors and fans (Amendment 1)
JIS B 0090-9:2001 Preparation of drawings for optical elements and systems -- Part 9: Surface treatment and coating
JIS B 0090-9:2021 Preparation of drawings for optical elements and systems -- Part 9: Surface treatment and coating

GSO

GSO IEC 61788-9:2021 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
BH GSO IEC 61788-9:2022 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
GSO ISO 10110-9:2014 Optics and optical instruments -- Preparation of drawings for optical elements and systems -- Part 9: Surface treatment and coating

ES-UNE

UNE 54100-9:2022 Graphic industries. Vocabulary. Part 9: Prepress fundamental terms
UNE-EN 61788-9:2005 Superconductivity -- Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors (Endorsed by AENOR in November of 2005.)
UNE-EN 13108-9:2018 Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL)
UNE 60670-9:2023 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 9: Previous tests of the supply and commissioning

CZ-CSN

CSN IEC 617-9:1993 Graphical symbols for diagrams. Part 9: Telecommunications: Switching and peripheral equipment

European Committee for Standardization (CEN)

EN 13108-9:2016 Bituminous mixtures - Material specifications - Part 9: Asphalt for Ultra-Thin Layer (AUTL)
EN 10246-9:2000 Non-Destructive Testing of Steel Tubes - Part 9: Automatic Ultrasonic Testing of the Weld Seam of Submerged Arc Welded Steel Tubes for the Detection of Longitudinal and/or Transverse Imperfections

AENOR

UNE 54100-9:2009 Graphic industries. Vocabulary. Part 9: Prepress fundamental terms

Korean Agency for Technology and Standards (KATS)

KS X IEC 60617-9-2013 Graphical symbols for diagrams－Part 9：Telecommunications：Switching and peripheral equipment
KS X IEC 60617-9:2001 Graphical symbols for diagrams-Part 9:Telecommunications:Switching and peripheral equipment
KS C IEC 61788-9:2016 Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors
KS X IEC 60617-9:2013 Graphical symbols for diagrams－Part 9：Telecommunications：Switching and peripheral equipment
KS X IEC 60617-9-2001(2011) Graphical symbols for diagrams－Part 9：Telecommunications：Switching and peripheral equipment
KS C IEC 61788-9-2021 Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors
KS C IEC 61788-9-2016(2021) Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors
KS P ISO TR 16840-9:2017 Wheelchair seating ─ Part 9: Clinical interface pressure mapping guidelines for seating
KS X ISO/IEC 15444-9-2022 Information technology－JPEG 2000 image coding system－Part 9：Interactivity tools, APIs and protocols
KS X ISO/IEC 19794-9:2008 Information technology-Biometric data interchange formats-Part 9:Vascular image data
KS X ISO/IEC 19794-9-2023 Information technology－Biometric data interchange formats－Part 9：Vascular image data

SG-SPRING SG

SS 202 Pt.9-1992 Graphical Symbols For Electrical, Electronics And Telecommunications Diagrams Part 9 : Telecommunications: Transmission

Institute of Electrical and Electronics Engineers (IEEE)

ST 2067-9:2018 ST 2067-9:2018 - SMPTE Standard - Interoperable Master Format - Sidecar Composition Map
SMPTE ST 2067-9:2018 ST 2067-9:2018 - SMPTE Standard - Interoperable Master Format - Sidecar Composition Map
ST 428-9:2008 ST 428-9:2008 - SMPTE Standard - D-Cinema Distribution Master — Image Pixel Structure Level 3 — Serial Digital Interface Signal Formatting
SMPTE ST 428-9:2008 ST 428-9:2008 - SMPTE Standard - D-Cinema Distribution Master — Image Pixel Structure Level 3 — Serial Digital Interface Signal Formatting

ES-AENOR

UNE 1-099 Pt.9-1990 Illustration symbols. Dynamic charts. Part 9: Various machines and their components

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0414-9-9-2012 Messwandler - Teil 9: Digitale Schnittstelle fuer Messwandler (IEC 38/438/CDV:2012); Deutsche Fassung FprEN 61869-9:2012
VDE 0530-9-2008 Drehende elektrische Maschinen - Teil 9: Geraeuschgrenzwerte (IEC 60034-9:2003@ modifiziert + A1:2007); Deutsche Fassung EN 60034-9:2005 + A1:2007
VDE 0675-9-2015 Ueberspannungsableiter - Teil 9: Metalloxidableiter ohne Funkenstrecken fuer HGUe-Stromrichterstationen (IEC 60099-9:2014); Deutsche Fassung EN 60099-9:2014
VDE 0721-9-2006 Sicherheit in Elektrowaermeanlagen - Teil 9: Besondere Anforderungen an kapazitive Hochfrequenz-Erwaermungsanlagen (IEC 60519-9:2005); Deutsche Fassung EN 60519-9:2005
VDE 0390-9-2006 Supraleitfaehigkeit - Teil 9: Messungen an massiven Hochtemperatursupraleitern - Eingefrorene magnetische Flussdichte bei grobkoernigen oxidischen Supraleitern (IEC 61788-9:2005); Deutsche Fassung EN 61788-9:2005
VDE 0126-4-9-2008 Photovoltaische Einrichtungen - Teil 9: Leistungsanforderungen an Sonnensimulatoren (IEC 60904-9:2007); Deutsche Fassung EN 60904-9:2007
VDE 0544-9-2010 Arc welding equipment - Part 9: Installation and use (IEC 60974-9:2010); German version EN 60974-9:2010
VDE 0544-9-2019 Arc welding equipment - Part 9: Installation and use (IEC 60974-9:2018); German version EN IEC 60974-9:2018
VDE 0471-9-1-2014 Pruefungen zur Beurteilung der Brandgefahr - Teil 9-1: Flammenausbreitung auf Oberflaechen - Allgemeiner Leitfaden (IEC 60695-9-1:2013); Deutsche Fassung EN 60695-9-1:2013
VDE 0300-4-9-2017 Elektrostatik - Teil 4-9: Standard-Pruefverfahren fuer spezielle Anwendungen - Bekleidung (IEC 61340-4-9:2016); Deutsche Fassung EN 61340-4-9:2016

GOST

GOST R ISO 7870-9-2023 Statistical methods. Control charts. Part 9. Control charts for stationary processes

DIN

DIN EN 10246-9:2000 Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections; English version of DIN EN 10246-9

ZA-SANS

SANS 10198-9:1988 The selection, handling and installation of electric power cables of rating not exceeding 33 kV Part 9: Jointing and termination of extruded solid dielectric-insulated cables up to 3,3 kV

IX-ICAO

ICAO AN 9-2015 Annex 9 - Facilitation

ANSI - American National Standards Institute

INCITS/ISO/IEC 19794-9:2011 Information technology - Biometric data interchange formats - Part 9: Vascular image data
INCITS/ISO/IEC 8859-9:1999 Information technology — 8-bit single-byte coded graphic character sets — Part 9: Latin alphabet No. 5

The American Road & Transportation Builders Association

AASHTO LRFDBDS-9-2020

NZ-SNZ

MP 9/9-1967 REPORTS ON FIRE RESISTANCE RATINGS OF ELEMENTS OF BUILDING STRUCTURE REPORT NO. 9 SURFACE SPREAD OF FLAME

Standard Association of Australia （SAA）

IEC 62899-202-9:2023 Printed electronics — Part 202-9: Materials — Conductive ink — Printed patterns for mechanical test
ISO/IEC 15944-9:2023 Information technology — Business operational view — Part 9: Business transaction traceability framework for commitment exchange

American National Standards Institute （ANSI)

ANSI/INCITS/ISO/IEC 15938-9:2009 Information technology - Multimedia content description interface - Part 9: Profiles and levels

CEN - European Committee for Standardization

PREN 14972-9-2018 Fixed firefighting systems - Water mist systems - Part 9: Test protocol for machinery in enclosures not exceeding 260 m3 for open nozzle systems

IN-BIS

IS 1879 Pt.9-1975 Test charts for universal parallel lathes Part 2 Lathes with swivel bed over 800 mm and up to I600 mm

Others: abma 9,ftm 9,din 9,Alpha 9,bs 9,book 9,Process 9?,Hypergraph 9,hypergraph,"9%4,ec?9,ej%9,"q?9,q%.9,q% 9,q "-9,/t 9,t,/9