water quality.doc

water quality.doc, Total:88 items.

The international standard classification for "water quality.doc" includes: .

The Chinese standard classification for "water quality.doc" includes: .

未注明发布机构

ENA DOC 015-2022

Group Standards of the People's Republic of China

T/CSES 49-2022 Technical guidelines for verification of water quality criteria for the protection of human health

SCC

Doc 1251-1968 Impregnated asbestos cement board (self-extinguishing) for electricalpurposes
Doc 1436-1969 Methods of testing water-based adhesives for use in packages
Doc 749:1989 Notes for charmen of technical committees
Doc 398:1958 Steel tubes for structural and other engineering purposes
Doc 1766:1971 Glazing and fixing of glass
Doc 1584:1970 Mechanical ventilation and air conditioning in buildings, Part 2: Fire precautions in buildings with air-handling systems
Doc 1507:1970 The Construction and installation of fire doors, fire windows and fire shutters, Part 1: Fire doors
Doc 945:1965 Minimum design loads on buildings: Part 1,2,3: Dead live loads
Doc 1157:1967 Construction in light timber framing
Doc 1905:1972 Safety requirements for children's toys and playthings
Doc 195-1951 SAA Int 48 - Enamel, exterior, matt, finishing, heat-resisting, stoving,Corrigendum
Doc 1585:1970 Fire dampers
Doc 1475:1969 Minimum design loads on structures, Part 2: Wind loads
Doc 1670:1970 AS K159 Recommended common names for pesticides
Doc 1645-1970 Small brazed steel cylinders for compressed gases (0.1 to 10 litres)
Doc 1634-1970 Rational series of copper pipes for shipbuilding purposes. Inch series
Doc 226-1952 Addendum to AS H58-1952 - Wrought aluminium and aluminium alloys(forgings) - Equivalent nomenclatures
Doc 255-1954 Interpretations of AS C100-1953 (Definitions and general reqquirementsfor electrical materials and equipment)
Doc 230-1952 Addendum to AS H50-1950 - Aluminium and aluminium alloys (tubes) -Equivalent nomenclatures
Doc 1676-1971 Methods of testing soils for engineering purposes Determination of static cone penetration resistance (Dutch cone test)
AS DOC 3000 R:1980 Rulings to AS 3000.1-1976, Rules for the electrical equipment of buildings, structures and premises Wiring methods (known as the SAA Wiring Rules)
Doc 1790-1971 Reliability of electronic equipment and components Part 3: Reliability programme for equipment
Doc 148-1950 Addendum 1 to AS CB14.1-1947 - Boiler welding certification code
Doc 1629-1970 Procedures for inter-conversion of values from one system of units to another
Doc 225-1952 Addendum to AS H59-1952 - Wrought aluminium and aluminium alloys (plate)- Equivalent nomenclatures
Doc 1747-1971 Dimensions of toroidal sealing rings and their housings (''o'' rings).Metric dimensions
Doc 1904-1972 Metric tolerances for G7. Hot rolled carbon steels and carbon-manganesesteels
Doc 1429-1969 Method of test for determination of breaking load and extension of woventextile fabrics
Doc 1638-1970 Classification of hazardous locations (noxious and flammable orexplosive atmospheres)
Doc 1850-1971 Three-strand hawser laid polyethylene rope
Doc 1431-1969 Sand-filled enclosure of electrical equipment for explosive atomospheres
Doc 1442-1969 Dimensions for punched paper tape for data interchange
Doc 1254-1968 Ceramic insulating materials for general electrical purposes
Doc 180-1951 Note to AS C116 stating that it is to be regarded also as AS C50-1950
Doc 136-1950 Increase in prices of Australian standards
Doc 1851-1971 Three-strand hawser laid polypropylene rope (made from fibrillated filmor multifilament)
Doc 1863-1972 Hooks for lifting freight containers of up to 30 tonnes
Doc 227-1952 Addendum to AS H48-1949 - Wrought aluminium and aluminium alloys (sheetand strip) - Equivalent nomenclature
Doc 1405-1969 Collapsible metal tubes
Doc 1711-1971 Motor vehicle headlighting
Doc 229-1952 Addendum to AS H51-1950, AS H52-1950 and AS H53-1950 - Wrought aluminiumand aluminium alloys - Equivalent nomenclatures
Doc 1820-1971 Fusion welded steel air reservoirs for road vehicles (Maximum capacity 5000 in3)
Doc 1252-1968 Glass fibre woven tapes for electrical purposes
Doc 1782-1971 Preservative treated wood piles of Australian origin
Doc 1644-1970 Small welded steel cylinders for compressed gases (0.1 to 10 litres)
Doc 260-1953 Guide to safety standards
Doc 1715-1971 Polyethylene (polythene) film for packaging dairy products
Doc 1250-1968 Phenolic-resin bonded asbestos-paper sheets for electrical insulation atpower frequencies
Doc 24-1945 Note to BS 76:1943
AS DOC 3000 N:2000 Whats new in the Wiring Rules 2000
Doc 250-1953 Transitory relaxation to AS A44-1950 - Fibrous plaster products
Doc 1428-1969 Methods for determining the comminution index of non-coal material usingthe Hardgrove machine
Doc 228-1952 Addendum to AS H54-1951 - Wrought aluminium and aluminium alloys (bars,rods and sections) - Equivalent nomenclatures
AS DOC 3000 R 1:1991 Rulings to AS 3000-1991 SAA Wiring Rules, Rulings No 1 (1991)
Doc 1249-1968 Electric strength of solid insulating materials at power frequencies
Doc 149-1950 Adoption of British amendment to AS B65-1943 - Ferrous pipes and pipinginstallations for and in connection with land boilers
Doc 1710-1971 Preparation of drawings for microfilming
Doc 175-1951 Addendum to AS NH49-1950 - Aluminium and aluminium alloys (ingots and castings)
Doc 1253-1968 Cast epoxide resin insulating material for electrical applications atpower frequencies
Doc 1406-1969 Collapsible metal tubes for eye ointment
Doc 1737-1971 Mail addresses and abbreviations
Doc 1797-1971 Terminal markings for direct acting and direct recording electricalmeasuring instruments
Doc 1686-1971 Stress-relieved cold-worked deformed reinforcing barsfor reinforced concrete
Doc 1249 TO 1254-1968 Electrical insulating materials
Doc 1405 TO 1406-1969 Collapsible metal tubes
Doc 1811-1812:1971 Industrial safety colour code & Code for industrial accidnet prevention signs
AS DOC 3000N:1991 Notes on changes in the SAA Wiring Rules - 10th edition (AS 3000-1991)as compared with the 9th edition (AS 3000-1986)
Doc 2124 N-1992 Notes on the changes in the General conditions of contract 4th edition (AS 2124-1992) as compared with the 3rd edition (AS 2124-1986)

Danish Standards Foundation

DS/ISO 7827:1988 Water quality. Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds. Method by analysis of dissolved organic carbon (DOC)

GSO

OS GSO ISO 8245:2013 Water quality - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)

International Organization for Standardization (ISO)

ISO 7827:1984 Water quality; Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds; Method by analysis of dissolved organic carbon (DOC)
ISO 8245:1999 Water quality - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)

Korean Agency for Technology and Standards (KATS)

KS I ISO 8245:2010 Water quality－Guidelines for the determination of total orgaic carbon(TOC) and dissolved organic carbon(DOC)
KS I ISO 8245-2010(2015) Water quality－Guidelines for the determination of total orgaic carbon(TOC) and dissolved organic carbon(DOC)
KS I ISO 8245:2022 Water quality — Guidelines for the determination of total organic carbon(TOC) and dissolved organic carbon(DOC)

Standard Association of Australia （SAA）

ENA Doc 008-2006 National guidelines on electrical safety for emergency service personnel
AS Doc 2124N:1992 Notes on the changes in the General conditions of contract 4th edition (AS 2124-1992) as compared with the 3rd edition (AS 2124-1986)
ENA Doc 013-2006 Network passport guideline
ENA Doc 005-2006 Joint use of power poles - Model agreement
ENA Doc 015-2006 National guidelines for prevention of unauthorised access to electricity infrastructure
ENA Doc 016-2006 Guideline for the management of risks when working alone
ENA Doc 014-2006 National low voltage electricity network electrical protection guideline

KR-KS

KS I ISO 8245-2022 Water quality — Guidelines for the determination of total organic carbon(TOC) and dissolved organic carbon(DOC)
KS I ISO 7827-2008(2023) Water quality－Evaluation in an aqueous medium of the “ultimate”aerobic biodegradability of organic compounds－Method by analysis of dissolved organic carbon(DOC)

VN-TCVN

TCVN 6634-2000 Water quality.Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)

Lithuanian Standards Office

LST ISO 8245:2003 Water quality. Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) (idt ISO 8245:1999)