multiple adjustment test

multiple adjustment test, Total:120 items.

The international standard classification for "multiple adjustment test" includes: Road vehicles in general , Metrology and measurement in general , Metrology and measurement. Physical phenomena (Vocabularies) , Iron ores , Accessories for lifting equipment , Linear and angular measurements , Electricity. Magnetism. Electrical and magnetic measurements .

The Chinese standard classification for "multiple adjustment test" includes: Car , Instruments and test devices for vehicle , Basic standards and general methods , Hoisting machinery , Length Measurement , Electromagnetic Measurement .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6730.83-2022 Iron ores—Determination of loss on ignition—Gravimetric method corrected by hygroscopic water
GB/T 29858-2013 Standard guidelines for molecular spectroscopy multivariate calibration quantitative analysis
GB/T 12548-1990 Motor vehicles－Speedometer and odometer－Calibration method
GB/T 20305-2006 Calibrated round steel link lifting chains - Guidelines to proper use and maintenance
GB/T 12548-2016 Motor vehicles speedometer and odometer calibration method

Hebei Provincial Standard of the People's Republic of China

DB13/T 1442-2011 Inspection and Calibration Method of Crane Overspeed Protection Device

National Metrological Verification Regulations of the People's Republic of China

JJG 283-1997 Verification Regulation of Angular Polygon
JJG 283-2007 Verification Regulation of Angular Polygon
JJG 169-2010 Verification regulation of transformer test set

Professional Standard - Machinery

JB/T 11574-2013 NC (numerical control) heavy multifunction horizontal lathe - Accuracy inspection
JB/T 8428-1996 Calibration of standard test blocks for ultrasonic testing instruments of steel welds
JB/T 7079-1993 Spring Driven Shock Tester and Its Calibration

National Metrological Technical Specifications of the People's Republic of China

JJF 2030-2023 Calibration Specification for Multiple Points Weighing CM Machines
JJF(机械) 021-2008 Calibration specification for armature tester

Group Standards of the People's Republic of China

T/GDASE 0018-2020 Safety Valve Periodical Check and Test
T/LZZLXH 063-2021 Internal Calibration Specifications for Inspection and Testing Laboratories
T/SPMA T/SPMA004-2023 Detection of malaria parasite nucleic acid by multiplex PCR methods

Professional Standard - Electron

SJ/T 31035-1994 Requirements of readiness and methods of inspection and assessment for bend dressing machines

Taiwan Provincial Standard of the People's Republic of China

CNS 13570.3-2000 Method of test for pesticide residues in food-Multi-residue analysis(III)
CNS 13570-1-1999 Method of Test for Pesticide Residues in Foods-Multi-residue Analysis(I)
CNS 17025-2007 General requirements for the competence of testing and calibration laboratories
CNS 13570-2-1999 Method of test for pesticide residuesin foods-Multi-residue analysis (Ⅱ)
CNS 13570.2-1999 Method of test for pesticide residuesin foods-Multi-residue analysis (Ⅱ)
CNS 17025-2001 General requirements for the competence of testing and calibration laboratories
CNS 13570.1-1999 Method of Test for Pesticide Residues in Foods-Multi-residue Analysis(I)
CNS 13570-3-2000 Method of test for pesticide residues in food-Multi-residue analysis(III)

Anhui Provincial Standard of the People's Republic of China

DB3411/T 0013-2022 Fairness Requirements for Inspection and Testing Institutions

Japanese Industrial Standards Committee (JISC)

JIS B 7728:1997 Calibration of force-proving instruments used for the verification of uniaxial testing machines
JIS Q 17025:2005 General requirements for the competence of testing and calibration laboratories
JIS Z 8754:1999 Vacuum technology -- Mass-spectrometer-type leak-detector calibration
JIS Q 17025:2000 General requirements for the competence of testing and calibration laboratories

American Society of Mechanical Engineers (ASME)

ASME V V 10-2006 Guide for Verification and Validation in Computational Solid Mechanics

South African Bureau of Standard

SANS 11630:2007 Cranes - Measurement of wheel alignment
SANS 3453:1984 Non-destructive testing — Liquid penetrant inspection — Means of verification

GSO

OS GSO ISO 8222:2009 Petroleum measurement systems – Calibration – Temperature corrections for use when calibrating volumetric proving tanks
GSO ISO 7592:2015 Calibrated round steel link lifting chains -- Guidelines to proper use and maintenance
OS GSO ISO 7592:2015 Calibrated round steel link lifting chains -- Guidelines to proper use and maintenance
BH GSO ISO 7592:2017 Calibrated round steel link lifting chains -- Guidelines to proper use and maintenance

Korean Agency for Technology and Standards (KATS)

KS M ISO 8222-2013 Petroleum measurement systems－Calibration－Temperature corrections for use when calibrating volumetric proving tanks
KS B ISO 9342:2003 Optics and optical instruments-Test lenses for calibration of focimeters
KS B ISO 9342:2013 Optics and optical instruments ― test lenses for calibration of focimeters
KS B ISO 7500-1:2003 Metallic materials-Verification of static uniaxial testing machines-Part 1:Tension/compression testing machines-Verification and calibration of the force-measuring system
KS B ISO 7500-1:2013 Metallic materials－Verification of static uniaxial testing machines－Part 1：Tension/compression testing machines－Verification and calibration of the force-measuring system
KS M ISO 8222:2003 Petroleum measurement systems-Calibration-Temperature corrections for use when calibrating volumetric proving tanks
KS M ISO 8222:2013 Petroleum measurement systems－Calibration－Temperature corrections for use when calibrating volumetric proving tanks
KS B ISO 12713:2008 Non-destructive testing－Acoustic emission inspection－Primary calibration of transducers
KS M ISO 18899:2007 Rubber－Guide to the calibration of test equipment
KS M ISO 18899:2017 Rubber－Guide to the calibration of test equipment

Danish Standards Foundation

DS/EN ISO 8222:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks

American Society for Testing and Materials (ASTM)

ASTM C1426-09 Standard Practices for Verification and Calibration of Polarimeters
ASTM C1426-99 Standard Practices for Verification and Calibration of Polarimeters
ASTM C1426-99(2004) Standard Practices for Verification and Calibration of Polarimeters
ASTM E126-19(2024) Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E126-13a Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E126-12 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E126-13 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM D347-04 Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and Coal Tar
ASTM E2063-00 Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM E126-19 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E2294-21 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

American National Standards Institute （ANSI)

ANSI/NCSL Z540-1-1994 Calibration -- Calibration Laboratories and Measuring and Test Equipment -- General Requirements

SCC

AENOR UNE 7120:1958 CORRECTION TABLES OF VOLUMES AND SPECIFIC WEIGHTS OF CREESOSTE AND COAL TAR
DIN EN ISO 8222 E:2019 Draft Document - Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO/DIS 8222:2019); German and English version prEN ISO 8222:2019

Spanish Association for Standardization (UNE)

UNE-EN ISO 8222:2003 Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)
UNE 58523:1988 CALIBRATED ROUND STEEL LINK LIFTING CHAINS. GUIDELINES TO PROPER USE AND MAINTENANCE

International Organization for Standardization (ISO)

ISO 9342:1996 Optics and optical instruments - Test lenses for calibration of focimeters
ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
ISO 12713:1998 Non-destructive testing - Acoustic emission inspection - Primary calibration of transducers
ISO 18899:2004 Rubber - Guide to the calibration of test equipment
ISO 6142:1981 Gas analysis; Preparation of calibration gas mixtures; Weighing methods
ISO 7592:1983 Calibrated round steel link lifting chains; Guidelines to proper use and maintenance
ISO 9342-2:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses
ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses

British Standards Institution (BSI)

BS EN ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
BS 7825-3.1:1997 Calibration of rubber and plastics test equipment - Calibration schedules - Thermal properties
19/30383995 DC BS EN ISO 8222. Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks
BS 6521:1984 Guide for proper use and maintenance of calibrated round steel link lifting chains
BS EN ISO 9342-2:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Test lenses for focimeters used for measuring contact lenses
BS EN ISO 9342-2:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Test lenses for focimeters used for measuring contact lenses
BS ISO 21474-2:2022 In vitro diagnostic medical devices. Multiplex molecular testing for nucleic acids - Validation and verification
BS EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Test lenses for focimeters used for measuring spectacle lenses
BS EN 12223:2000(2008) Non-destructive testing - Ultrasonic examination - Specification for calibration block No.1
BS EN 12223:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No.1

Lithuanian Standards Office

LST EN ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)

CN-QIYE

Q/GDW 1439-2014 Calibration specification for multi-functional electric measuring and testing device

European Committee for Standardization (CEN)

EN ISO 9342:1998 Optics and Optical Instruments - Test Lenses for Calibration of Focimeters ISO 9342:1996; Superseded by EN ISO 9342-1:2005
EN 12223:1999 Non-Destructive Testing - Ultrasonic Examination - Specification for Calibration Block No. 1

Association Francaise de Normalisation

NF S12-134:1998 Optics and optical instruments. Test lenses for calibration of focimeters.
NF P98-744-5:1996 Road construction and maintenance equipment. On-site calibration and verification of the settings of the continuous dosing apparatus of material production plants. Part 5 : dry bulk weighing dosing machine. Substance weighing test.
NF M08-005:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks.
NF P98-744-6:2009 Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 6 : on-site calibration and verification of the settings of continuous asphalt dosing ap
NF P98-744-2:1996 Road construction and maintenance equipment. On-site calibration and verification of the settings of the continuous dosing apparatus of material production plants. Part 2 : aggregate weighing dosing machine.
NF P98-744-4:1996 Road construction and maintenance equipment. On-site calibration and verification of the settings of the continuous dosing apparatus of material production plants. Part 4 : dry bulk weighing dosing machine. Belt sampling test.
NF A09-311*NF EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
NF A09-311:2000 Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1.
NF S12-134-1*NF EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1 : test lenses for focimeters used for measuring spectacle lenses.
NF X06-048-2*NF ISO 11843-2:2000 Capability of detection - Part 2 : methodology in the linear calibration case
NF P98-744-7:2009 Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 7 : powder weighing dosing machine with total weighed screw - Substance weighing test
NF S12-134-2*NF EN ISO 9342-2:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2 : test lenses for focimeters used for measuring contact lenses.

ANSI - American National Standards Institute

X9.100-151-2004 Check Correction Strip Specification (Replaces ANSI X9.40)

VN-TCVN

TCVN 6997-2002 Mine hoist.Correction and verification

API - American Petroleum Institute

API MPMS 11.1 VOL XIII-1982 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume XIII Table 5D-Generalized Lubricating Oils Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6D-Generalized Lubricating Oils Correction of Volu
API STD 2541-1968 STANDARD TABLES FOR POSITIVE DISPLACEMENT METER PROVER TANKS
API MPMS 11.1 VOL I-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume I Table 5A - Generalized Crude Oils and JP-4 Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6A - Generalized Crude Oils and JP-4 Correction
API MPMS 11.1 VOL II-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume II Table 5B - Generalized Products Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6B - Generalized Products Correction of Volume to 60 Degre

ESDU - Engineering Sciences Data Unit

ESDU 83029 D-1992 The correction of flight-test anemometric data.

German Institute for Standardization

DIN 54141-2:1982 Non-destructive testing; Eddy current testing of pipes and tubes; Reference method for the determination and calibration of the properties of an eddy current testing system using concentric test coils
DIN EN ISO 8222:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002); German version EN ISO 8222:2002
DIN EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005); German version EN ISO 9342-1:2005
DIN 764-1:1992 Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 3,5d
DIN 764-2:1992 Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 3,5d

GB-REG

REG NASA-LLIS-1227-1999 Lessons Learned - Adequacy of multiple checkpoints to ensure correct installation

PL-PKN

PN H54551-1990 Foundry machinery and plant Checking the alignment and operation of mecanisms

CZ-CSN

CSN 25 3719-1972 Checking and lay-out tools. Sine bars with mounting centres

HU-MSZT

MSZ 6726/3-1979 Improve mechanical inspection. multi-story crane

RO-ASRO

STAS 7802/4-1979 CALIBRATING BLOCKS FOR VERIF YIND AND REGULATING OF FLAW DETECTORS Calibrating blocks type A3
STAS 7802/2-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type Al
STAS 7802/3-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type A2

International Electrotechnical Commission (IEC)

IEC 60094-2:1994/COR1:1995 Magnetic tape recording and reproducing systems - Part 2: Calibration tapes; Corrigendum 1

IT-UNI

UNI 6326-1968 Tensile testing machinery. Calibration check