share

share, Total:33 items.

The international standard classification for "share" includes: Moulding equipment , Electrical wires and cables in general , Sewing machines and other equipment for the clothing industry , Transport by rail .

The Chinese standard classification for "share" includes: Paper manufacturing machinery in general , Software engineering , Mould , Cable and its accessory , Other light industry machinery , Freight transport .

---

Professional Standard - Post and Telecommunication

• TZ 005-1995(上) Domestic Satellite Communication Network Technology System (Trial Implementation) (Volume 1)

Professional Standard - Light Industry

• QB/T 1568-1992 Parting Cut Upper/Lower Round Knife

Professional Standard - Construction Industry

• JGJ 35-1987(第三部分) Standard for parameter of construction atmosphere (Part 3)
• JGJ 35-1987(第二部分) Standard for parameter of construction atmosphere (Part 2)
• JGJ 35-1987(第一部分) Standard for parameter of construction atmosphere (Part 1)
• JGJ 35-1987(第四部分) Standard for parameter of construction atmosphere (Part 4)

Professional Standard - Military and Civilian Products

• WJ 1478.4-2007 Indexable tools - Part 4: Upper-packing positive-rake-angle facing type cutter

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 2856.1-2008 Holders for ball-bearing die sets for stamping dies - Part 1: Punch holders for die sets
• GB/T 28174.2-2011 Unified modeling language(UML)—Part 2:Superstructure specification
• GB/T 2855.1-2008 Holders for sliding guide die sets for stamping dies - Part 1: Punch holders for die sets

Professional Standard - Petroleum

• SY 5089.2-2013 Drilling Well History Format Part 2; Offshore Section
• SY/T 5089.2-2007 Well history format for drilling Part 2:Offshore drilling

Professional Standard - Aquaculture

• SC/T 7016.5-2012 Fish cell lines-Part 5:Epithelioma papulosum cyprini cell line (EPC)

Professional Standard - Machinery

• JB/T 5814.8-2008 Equipments for electric wires and cables—Basic parameters—Part 8:Upward continuous casting machines

国家市场监督管理总局、中国国家标准化管理委员会

• GB/T 31301.6-2020 Footwear manufacturing machines—Safety requirements—Part 6:Cementing and cementing drying machines

Professional Standard - Railway

• TB/T 3079.4-2005 Material and device for loading and securing freight -- Part 4: Top Tie Nets

Sichuan Provincial Standard of the People's Republic of China

• DB51/T 1916.4-2014 Aramid Ⅲ fiber test method part 4: sizing agent content

German Institute for Standardization

• DIN EN ISO 10545-11:1996 Ceramic tiles - Part 11: Determination of crazing resistance for glazed tiles (ISO 10545-11:1994); German version EN ISO 10545-11:1996
• DIN EN ISO 19901-3:2015-04 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2014); English version EN ISO 19901-3:2014, only on CD-ROM / Note: CD-ROM*To be replaced by DIN EN ISO 19901-3 (2022-08).

US-CFR-file

• CFR 15-756.2-2014 Commerce and foreign trade. Part756:Appeals. Section756.2:Appeal from an administrative action.
• CFR 15-756.1-2014 Commerce and foreign trade. Part756:Appeals. Section756.1:Introduction.
• CFR 30-590.4-2014 Mineral Resources. Part590:Appeal procedures. Section590.4:How do I file an appeal?
• CFR 15-756.1-2013 Commerce and foreign trade. Part756:Appeals. Section756.1:Introduction.

HU-MSZT

• MSZ 11481-1981 Potassium. Analysis on target
• MSZ 5969-1957 Phosphate target analysis
• MSZ 5966-1957 Analysis on Chlorinated Targets

Association Francaise de Normalisation

• NF EN 12503-6:2001 Sports mat - Part 6: determination of the anti-slip characteristics of the upper surface

IN-BIS

• IS 7610 Pt.3-1975 Specification for Mechanical Fabrics Wool Part III Sized Flannel

European Committee for Standardization (CEN)

• EN ISO 10545-10:2021 Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:2021, Corrected version 2021-09)

RU-GOST R

• GOST 24464-1980 Feed pumps for nuclear power plant. General technical requirements

Danish Standards Foundation

• DS/EN ISO 19901-3:2011 Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure

SCC

• DANSK DS/EN ISO 19901-3:2015 Petroleum and natural gas industries – Specific requirements for offshore structures – Part 3: Topsides structure
• CAN/CSA-ISO 19901-3-2015(R2020) Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure

Others: Shangneng,up conversion,upper liquid,address,Manganese,antibody on,amide on,SCO,Iodine,Quantitatively,on pn,qualitatively,share,crown,Sulfur on,corner,instrument,Determination,top score,factor