On-machine measurement practice

On-machine measurement practice, Total:214 items.

The international standard classification for "On-machine measurement practice" includes: .

The Chinese standard classification for "On-machine measurement practice" includes: .

未注明发布机构

VDI VDE 2617 Blatt 2-1-2014 Accuracy of coordinate measuring machines Parameters and their reverification Code of practice for the application of DIN EN ISO 10360-2 for length measurement
CAN/CSA-ISO 5349-2:2016 Mechanical vibrations — Measurement and assessment of exposure of individuals to hand-transmitted vibrations — Part 2: Practical guide for measurement in the workplace
ANSI/ASAE S355.5-2015 Safety Practices for Agricultural Front-End Loaders

American National Standards Institute （ANSI)

ANSI/ASTM E2628:2009 Practice for Dosimetry in Radiation Processing
ASTM 51026-23 Standard Practice for Using the Fricke Dosimetry System (Standard + Redline PDF Bundle)
ANSI/ASSE Z15.1-2017 Safe Practices for Motor Vehicle Operations
BS 8646:2023 Use of autonomous mobile machinery in agriculture and horticulture. Code of practice (British Standard)

British Standards Institution (BSI)

BS 10175:2011+A2:2017 Investigation of potentially contaminated sites. Code of practice - Code of practice
BS EN ISO/IEC 15408-4:2023 Information security, cybersecurity and privacy protection. Evaluation criteria for IT security - Framework for the specification of evaluation methods and activities
PD ISO/TR 19997:2018 Guidelines for good practices in zeta-potential measurement
BS 7255:2023 Safe working on lifts. Code of practice
PD ISO/TR 22814:2020 Good practice for dynamic light scattering (DLS) measurements
PD ISO/TR 10064-6:2009 Code of inspection practice. Bevel gear measurement methods
BS ISO/ASTM 51818:2020 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 k
12/30273487 DC BS ISO 51818. Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV
16/30344112 DC BS ISO/ASTM 51939. Practice for blood irradiation dosimetry
PD ISO/TR 10064-1:2019 Code of inspection practice. Measurement of cylindrical gear tooth flanks
BS ISO 15555:1998 Practice for use of a ceric-cerous sulfate dosimetry system
BS ISO 15570:1998 Practice for use of cellulose acetate dosimetry system
BS ISO 15571:1998 Practice for dosimetry in a gamma irradiation facility for radiation processing
BS ISO 15571:1998(2000) Practice for dosimetry in a gamma irradiation facility for radiation processing
19/30394393 DC BS ISO 52628. Standard practice for dosimetry in radiation processing
BS ISO 15570:1998(2000) Practice for use of cellulose acetate dosimetry system
14/30303365 DC BS ISO/ASTM 51649. Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
14/30303362 DC BS ISO/ASTM 51608. Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV
PD 6461-4-2004 General metrology - Part 4: Practical guide to measurement uncertainty
BS ISO 15554:1998(2000) Practice for dosimetry in gamma irradiation facilities for food processing
BS 11200:2014 Crisis management. Guidance and good practice
BS PAS 200:2011 Crisis management. Guidance and good practice
23/30451674 DC Draft BS 8646 Use of autonomous mobile machinery in agriculture and horticulture. Code of practice
BS ISO 15554:1998 Practice for dosimetry in gamma irradiation facilities for food processing
BS ISO 15557:1998 Practice for use of a radiochromic film dosimetry system
BS ISO 15555:1998(2000) Practice for use of a ceric - cerous sulfate dosimetry system
13/30264511 DC BS ISO/ASTM 52628. Standard practice for dosimetry in radiation processing

American Society for Testing and Materials (ASTM)

ASTM E811-95 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
ASTM D7314-10(2015) Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
ASTM D7314-08 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
ASTM D7314-21 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
ASTM E811-09(2020)e1 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
ASTM D3767-96 Standard Practice for Rubber-Measurement of Dimensions
ASTM E2935-16 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E2935-17 Standard Practice for Conducting Equivalence Testing in Laboratory Applications
ASTM E821-16 Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
ASTM E795-05(2012) Standard Practices for Mounting Test Specimens During Sound Absorption Tests
ASTM D7164-21 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
ASTM E2691-20 Standard Practice for Job Productivity Measurement
ASTM D7165-10(2015) Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
ASTM ISO/ASTM51026-15 Standard Practice for Using the Fricke Dosimetry System
ASTM D6224-16 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM D3767-03(2014) Standard Practice for Rubber—Measurement of Dimensions
ASTM D6599-00(2014)e2 Standard Practice for Construction of Live Fascines on Slopes
ASTM D3322-82(2001) Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D3322-82(2017) Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM E2281-08 Standard Practice for Process and Measurement Capability Indices
ASTM E1212-17 Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies
ASTM E2281-15(2020) Standard Practice for Process Capability and Performance Measurement
ASTM D3322-82(1996)e1 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D7430-18ae1 Standard Practice for Mechanical Sampling of Coal
ASTM D7036-04 Standard Practice for Competence of Air Emission Testing Bodies
ASTM D7430-16be1 Standard Practice for Mechanical Sampling of Coal
ASTM E1248-90(2017) Standard Practice for Shredder Explosion Protection
ASTM D7430-18a Standard Practice for Mechanical Sampling of Coal
ASTM C1176/C1176M-20 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
ASTM F2554-22 Standard Practice for Measurement of Positional Accuracy of Computer-Assisted Surgical Systems
ASTM B940-05(2020) Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces
ASTM D4378-20 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
ASTM D7430/D7430M-20 Standard Practice for Mechanical Sampling of Coal
ASTM D7718-11(2019) Standard Practice for Obtaining In-Service Samples of Lubricating Grease
ASTM F2554-18 Standard Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems
ASTM F2217/F2217M-13(2018) Standard Practice for Coating/Adhesive Weight Determination
ASTM D4228-05(2017) Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
ASTM D6504-11(2016)e1 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
ASTM D7430-17 Standard Practice for Mechanical Sampling of Coal
ASTM E1248-90(1997) Standard Practice for Shredder Explosion Protection
ASTM E697-96(2019) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
ASTM D8107-17 Standard Practice for Determining Sediment Pond Skimmer Flow Rate
ASTM D4414-95(2020) Standard Practice for Measurement of Wet Film Thickness by Notch Gages
ASTM D7430-18 Standard Practice for Mechanical Sampling of Coal
ASTM G84-89(2020) Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
ASTM D4414-95(2001) Standard Practice for Measurement of Wet Film Thickness by Notch Gages
ASTM D4414-95 Standard Practice for Measurement of Wet Film Thickness by Notch Gages
ASTM D8107-18 Standard Practice for Determining Sediment Pond Skimmer Flow Rate
ASTM E74-00a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E177-20 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E2727-10e1 Standard Practice for Assessment of Rainwater Quality
ASTM D3596-14 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
ASTM A1030/A1030M-03 Standard Practice for Measuring Flatness Characteristics of Coated Sheet Products
ASTM A1030/A1030M-05 Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
ASTM A1030/A1030M-21 Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
ASTM E377-08(2020) Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
ASTM D6957-12(2018) Standard Practice for Measuring Curl in Paint Brush Filling Material
ASTM A987/A987M-19 Standard Practice for Measuring Shape Characteristics of Tin Mill Products
ASTM E2727-18 Standard Practice for Assessment of Rainwater Quality
ASTM E177-90a(1996) Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM G84-89(1999)e1 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
ASTM D4430-00(2015) Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM D4270-95 Standard Guide for Using Existing Practices in Developing and Writing Test Methods
ASTM E177-19 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
ASTM D4227-05 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
ASTM D7378-16 Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
ASTM ISO/ASTM 51538-17 Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
ASTM D6026-01 Standard Practice for Using Significant Digits in Geotechnical Data
ASTM E3003-20 Standard Practice for Body Armor Wearer Measurement and Fitting of Armor
ASTM E3084-17 Standard Practice for Characterizing Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)
ASTM ISO/ASTM51538-09 Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
ASTM ISO/ASTM51538-17 Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
ASTM E2067-20 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
ASTM D3731-20 Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
ASTM E493/E493M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM D4188-17 Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water
ASTM D4227-05(2017) Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
ASTM E1345-98(2008) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM ISO/ASTM 51538-09 Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
ASTM ISO/ASTM51939-02 Standard Practice for Blood Irradiation Dosimetry
ASTM ISO/ASTM51939-05(2013) Standard Practice for Blood Irradiation Dosimetry
ASTM ISO/ASTM 51939-17 Standard Practice for Blood Irradiation Dosimetry
ASTM ISO/ASTM 51939-05 Standard Practice for Blood Irradiation Dosimetry
ASTM E493/E493M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM B507-14(2021) Standard Practice for Design of Articles to Be Electroplated on Racks
ASTM ISO/ASTM 51939-05(2013) Standard Practice for Blood Irradiation Dosimetry
ASTM D8102-17 Standard Practice for Manufacturing Quality Control of Geotextiles

IN-BIS

IS 4025-1983 Measurement Practice of Rolling Bearings
IS 11689-1986 Measurement practice of straight edge splines for general engineering

GSO

GSO ISO/ASTM 51939:2017 Practice for blood irradiation dosimetry
ISO/TS 5973:2024 Laser diffraction measurements — Good practice
GSO ISO/ASTM 51818:2021 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV
BH GSO ISO/ASTM 51818:2022 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV
GSO ISO/ASTM 51649:2021 Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
GSO ISO/ASTM 51401:2017 Practice for use of a dichromate dosimetry system
GSO ASTM C919:2013 Standard Practice for Use of Sealants in Acoustical Applications
GSO ISO/ASTM 51702:2017 Practice for dosimetry in a gamma facility for radiation processing
OS GSO ISO/ASTM 51702:2017 Practice for dosimetry in a gamma facility for radiation processing
BH GSO ISO/ASTM 51650:2017 Practice for use of a cellulose triacetate dosimetry system
GSO ISO/ASTM 51650:2017 Practice for use of a cellulose triacetate dosimetry system
GSO ISO/ASTM 52116:2017 Practice for dosimetry for a self-contained dry-storage gamma irradiator
OS GSO ISO/ASTM 51608:2015 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV

Korean Agency for Technology and Standards (KATS)

KS A ISO/ASTM 51702-2012(2017) Practice for dosimetry in a gamma irradiation facility for radiation processing
KS A ISO/ASTM 51608-2012(2017) Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing
KS A ISO/ASTM 51400-2020 Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
KS A ISO/ASTM 51702-2022 Practice for dosimetry in a gamma irradiation facility for radiation processing
KS A ISO/ASTM 51275-2020 Practice for use of a radiochromic film dosimetry system

International Organization for Standardization (ISO)

ISO/CD TS 5973.2:2023 Good practice for laser diffraction measurements
ISO/TR 19997:2018 Guidelines for good practices in zeta-potential measurement
ISO/CD TS 5973 Good practice for laser diffraction measurements
ISO/ASTM 51538:2017 Practice for use of the ethanol-chlorobenzene dosimetry system

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 268-1982 STANDARD METRIC PRACTICE
IEEE 1301.2-1993 Recommended Practices for the Implementation of a Metric Equipment Practice (IEEE Std 1301-1991; IEEE Computer Society Document)

SCC

BS PD ISO/TR 19997:2018 Guidelines for good practices in zeta-potential measurement
DANSK DS/ISO/TR 19997:2018 Guidelines for good practices in zeta-potential measurement
VDI 3962-1995 Practical IT use in automated warehouses
BS 10175:2011 Investigation of potentially contaminated sites. Code of practice
BS ISO /ASTM 51818:2020 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 k
BS PD ISO/TR 22814:2020 Good practice for dynamic light scattering (DLS) measurements
VDI/VDE 2617 BLATT 6.1-2007 Accuracy of coordinate measuring machines — Parameters and their testing — Coordinate measuring machines with optical probing — Guide to the application of DIN EN ISO 10360 for coordinate measuring machines with optical sensors for lateral structures
DANSK DS/ISO/TR 22814:2020 Good practice for dynamic light scattering (DLS) measurements
BS BIP 2229:2013 Code of Practice for In-service Inspection and Testing of Electrical Equipment. 4th Edition
10/30205348 DC BS 10175. Investigation of potentially contaminated sites. Code of practice
BS 5304:1975 Code of practice. Safeguarding of machinery
BS 5887:1980 Code of practice for testing of computer-based systems
BS PD ISO/TR 10064-1:2017 Code of inspection practice-Measurement of cylindrical gear tooth flanks
BS PD ISO/TR 10064-1:2019 Code of inspection practice-Measurement of cylindrical gear tooth flanks
ASSP Z15.1-2012 Safe Practices for Motor Vehicle Operations
AWWA 51488 Piloting New Work Practices in Utility Maintenance
ASSP Z15.1-2006 Safe Practices for Motor Vehicle Operations
ASTM D7783-12 Standard Practice for Within-laboratory Quantitation Estimation (WQE)
AWWA MTC57625 Three Years of Practical Experience at PWN's UF/RO Treatment Plant Heemskerk
BS 3680-3Q:1993 Measurement of liquid flow in open channels. Stream flow measurement-Code of practice for safe practice in stream gauging
MIL MIL-STD-1839C-2000 STANDARD PRACTICE FOR CALIBRATION AND MEASUREMENT REQUIREMENTS (SUPERSEDING MIL-STD-1839B)
AS 3576:1988 Brushcutters - Guide to safe working practices

Institute of Electrical and Electronics Engineers (IEEE)

P149/D10 February 2021 IEEE Draft Recommended Practice for Antenna Measurements
IEEE P149/D9, February 2021 IEEE Draft Recommended Practice for Antenna Measurements
IEEE P149/D11 July 2021 IEEE Draft Recommended Practice for Antenna Measurements
RP 2110-25:2023 RP 2110-25:2023 - SMPTE Recommended Practice - Professional Media over Managed IP Networks: Measurement Practices
IEEE P1720/D2, April 2012 IEEE Draft Recommended Practice for Near-Field Antenna Measurements
P43/D17, January 2013 IEEE Draft Recommended Practice for Testing Insulation Resistance of Electric Machinery
IEEE P1159/D7, April 2019 IEEE Approved Draft Recommended Practice for Monitoring Electric Power Quality
IEEE Std 1017.4-2023 IEEE Recommended Practice for Testing and Rating of Electrical Submersible Pump Motors
IEEE P219 IEEE Recommended Practice on Audio and Electro Acoustics Loudspeaker Measurements 1961
IEEE P1017.4/D3, April 2023 IEEE Draft Recommended Practice for Testing and Rating of Electrical Submersible Pump Motors
IEEE 1017.4-2023 IEEE Recommended Practice for Testing and Rating of Electrical Submersible Pump Motors
IEEE P1017.4/D2, March 2023 IEEE Draft Recommended Practice for Testing and Rating of Electrical Submersible Pump Motors

Society of Automotive Engineers (SAE)

SAE ARP1972-2003 Recommended Measurement Practices and Procedures for EMC Testing
SAE J964-2024 Recommended Practice for Measuring Haze and Reflectance of Mirrors

Association Francaise de Normalisation

BP Z67-220:2014 Good practices for deploying SAM in the Cloud
FD H50-017:2017 Pallets - Good practice guide - Measurement of the moisture content of wooden pallets
CWA 16373:2011 Best practice approach for electromagnetic induction (EMI) measurements of the near surface
XP ISO/TS 20914:2020 Medical biology laboratories - Practical recommendations for estimating measurement uncertainty

Association of German Mechanical Engineers

DVS 1162-2005 Take your “practical test” in the field of welding, cutting and coating (FTB) at the DVS® Educational Institute

AASHTO - American Association of State Highway and Transportation Officials

R 89-2018 Standard Practice for Accreditation Bodies Operating in the Fields of Construction Materials Testing and Inspection

American Society of Civil Engineers (ASCE)

ASCE MOP 110-2008 SEDIMENTATION ENGINEERING: PROCESSES, MEASUREMENTS, MODELING, AND PRACTICE

ZA-SANS

SANS 5725-6:2009 Accuracy (trueness and precision) of measurement methods and results Part 6: Use in practice of accuracy values

UY-UNIT

UNIT 629-1981 Measurement of soluble proteins in gastric prionase in animal feed (using practical method)

Electronic Components, Assemblies and Materials Association

ECA TEP 167-1970 Measurement of X-Radiation from Receiving Tubes, Recommended Practice for
ECA TEP 181-1980 Measurement of X-Radiation from Power Tubes, Recommended Practice for
ECA EIA-503-A-1990 Recommended Practice for the Measurement of X-Radiation from Direct-View Television Picture Tubes Errata: 03/06/2001

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP84A-2004 Recommend Practice for Measurement of Transistor Lead Temperature

AENOR

UNE 82009-6:1999 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS. PART 6: USE IN PRACTICE OF ACCURACY VALUES.

KR-KS

KS A ISO 5725-6-2023 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values

ECIA - Electronic Components Industry Association

TEP 170-1972 X-Radiation Detection and Measurements for Microwave Tubes@ Recommended Practice on

Standard Association of Australia （SAA）

AS 2829:1986/Amdt 1:1986 British Association (BA) Threads and Related Gauges and Measurement Practice

AGMA - American Gear Manufacturers Association

915-1-A02-2002 Inspection Practices - Part 1: Cylindrical Gears - Tangential Measurements
915-2-A05-2005 Inspection Practices - Part 2: Cylindrical Gears - Radial Measurements

CN-STDBOOK

图书 A-4493 Ratiometric Theory and Practice
图书 A-4595 The theory and practice of agency performance management

US-American Society of Safety Engineers

ASSE Z15.1-2012 Safe Practices for Motor Vehicle Operations

VDI - Verein Deutscher Ingenieure

VDI/VDE 2617 Blatt 2.1-2001 Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement
VDI/VDE 2617 Blatt 2.1-2012 Accuracy of coordinate measuring machines - Parameters and their reverification - Code of practice for the application of DIN EN ISO 10360-2 for length measurement

API - American Petroleum Institute

API REPORT 79-22-1980 Applicability of Reliability Analysis in Offshore Design Practice

IET - Institution of Engineering and Technology

STEPP MOTOR-2002 Stepping Motors: a guide to theory and practice

Electronic Components, Assemblies and Materials Association

ECA 501-A-1990 Recommended Practice for the Measurement of X-Radiation from Raster-Scanned Direct-View Data Display Cathode-Ray Tubes

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 151-2002 Practices for Measuring@ Testing@ Adjusting and Balancing Shipboard HVAC&R Systems

Danish Standards Foundation

DS/CWA 16373:2012 Best practice approach for electromagnetic induction (EMI) measurements of the near surface
DS/ISO 17822:2020 In vitro diagnostic test systems – Nucleic acid amplification-based examination procedures for detection and identification of microbial pathogens – Laboratory quality practice guideLaboratory quality practice guide

Federal Aviation Administration (FAA)

FAA 14 CFR PART 16-2011 RULES OF PRACTICE FOR FEDERALLY-ASSISTED AIRPORT ENFORCEMENT PROCEEDINGS

Others: On-machine measurement of station groups,On-machine measurement practice,On-board measurement of radio signals,On-board measurement agent,On-machine measuring head