Carrier gas requirements
Carrier gas requirements, Total:258 items.
The international standard classification for "Carrier gas requirements" includes: Aircraft and space vehicles in general , Radiation measurements , Telecommunications in general , Ground service and maintenance equipment , Space systems and operations , Cranes , Heat treatment and coating , Chemical laboratories. Laboratory equipment , Transport by water , Geology. Meteorology. Hydrology , Transport exhaust emissions , Technical product documentation , General standards related to shipbuilding and marine structures .
The Chinese standard classification for "Carrier gas requirements" includes: General technical requirements , Takeoff and landing devices , Technical management , Radiation protection detection and evaluation , Spacecraft , Spacecraft in general , Carrier communication equipment , Special vehicles , Hoisting machinery , Heat treatment , Electrochemical, thermochemistry and optical profile type analyzer , Meteorology , Discharge standard for mobile pollution sources , Communication network in general , Technical management , Vessel technology .
Professional Standard - Aviation
- HB 8691-2023 General requirements of onboard maintenance system
- HB 8742-2023 General requirements for Emulated load ofaircraft electrical system
- HB 8611-2021 General requirements for air pressure loading for aircraft structural testing
- HB 8390-2013 Loadable software requirements for civil aircraft
- HB 7817-2006 Requirements for load test and spectrum establishment of helicopter structure
- HB 20052-2011 General requirements of modeling for airborne equipment
- HB 20053-2011 Requirements of model check for airborne equipment
- HB 7077-1994 Design Requirements for Mooring of Shipborne Helicopter
Military Standard of the People's Republic of China-General Armament Department
- GJB 9634-2019 Requirements for interface of manned spacecraft and launch vehicle
- GJB 9351-2018 General requirements for the launch of small satellites on launch vehicles
- GJB 2137.8-1994 Airborne Radar General Requirements Flight Verification Requirements
- GJB 8186-2015 General requirements for airborne collision avoidance systems
- GJB 2137.2-1994 General requirements terminology for airborne radar
- GJB 9745-2020 Harmful gas control requirements for manned spacecraft
- GJB 10222-2021 Technical requirements for sea transportation of launch vehicles
- GJB 9635-2019 Payload user interface requirements for manned space applications
- GJB 9221-2017 Requirements for pre-launch status inspection of manned launch vehicles
- GJB 7101-2010 General requirements for task payloads of unmanned aerial vehicle
- GJB 3267-1998 Airborne anti-tank missile interface requirements
- GJB 2137.3-1994 Airborne Radar General Requirements Tactical Technical Requirements Project Format
- GJB 9713-2020 Manned spacecraft payload carrying requirements
- GJB 10221-2021 Technical requirements for joint operation of manned spacecraft and launch vehicles
- GJB 9703-2020 Requirements for test flights and release of carrier-based aircraft
- GJB 4034-2000 General requirements for satellite carrying
- GJB 2226.6-1994 General requirements for shipborne radar intelligence systems Interface requirements
- GJB 9746-2020 Fire safety requirements for manned spacecraft
- GJB 5016-2001 Payload/launch vehicle interface control documentation requirements
- GJB 5771-2006 General requirement for shipborne helicopter
- GJB 2226.7-1994 General requirements for shipborne radar intelligence systems Environmental requirements
- GJB 9715-2020 Manned space application payload on-orbit test requirements
- GJB 2137.1-1994 General requirements for airborne radar
- GJB 802-1990 Additional military requirements for cargo vehicles
- GJB 2137.7-1994 General requirements for airborne radar maintainability requirements
- GJB 9701-2020 Carrier-based aircraft arresting test requirements
- GJB 2226.5-1994 General requirements for shipborne radar intelligence systems, design and manufacturing requirements
- GJB 10287-2021 General requirements for shipboard remote-controlled weapon stations
- GJB 2355-1995 Airborne computer module design requirements
- GJB 9873-2020 Requirements for spaceborne nuclear explosion monitoring system
- GJB 5217-2004 Interface requirements for airborne measurement and control equipment
- GJB 2137.5-1994 General requirements for airborne radar design and manufacturing requirements
- GJB 4231-2001 Payload/launch vehicle interface control documentation requirements
- GJB 9639-2019 Manned spacecraft instrument display requirements
- GJB 2226.8-1994 General requirements for shipborne radar intelligence systems software requirements
- GJB 9714-2020 Manned spacecraft deorbit requirements
- GJB 8813-2015 Requirements for shipboard generalized launch control system and missile electrical interface
- GJB 6674-2009 General requirement for the naval airborne display console
Professional Standard - Ocean
- HY/T 0445-2024 Technical requirements for shipborne aerosol lidar
Professional Standard - Electron
- SJ 20353-1993 General performance requirements of electrical assembly for airborne radar
Shanxi Provincial Standard of the People's Republic of China
- DB14/T 1440-2017 Maintenance Requirements for Airborne Atmospheric Physical Detection Instruments
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 44930-2024 Interface requirements of high-altitude scientific balloon platform and payload
- GB/T 42213-2022 Requirements for space payloads re-flight
- GB/T 14239-1993 Specifications for basic frequenceis of carrier supply systems
- GB/T 42290-2022 Analysis and control specifications for airborne radioactive source term of pressurized water reactor nuclear power plant
- GB/T 44318-2024 Requirements for piggyback payload of lunar and deep space probe
- GB/T 22415-2008 Cranes - Requirments for test loads
- GB/T 42046-2022 Payload transportation requirements for manned spacecraft
- GB/T 38805-2020 Technical requirements of heat treatment for heavy duty gears
- GB/T 42213-2022(英文版) Requirements for space payload re-flight
- GB/T 42860-2023 General requirements of transportation for launch vehicle
- GB/T 40699-2021 Requirements of launch vehicle to electrical ground support equipment interfaces
- GB/T 23421-2009 Aircraft - Basic requirements for aircraft loading equipment
Group Standards of the People's Republic of China
- T/WSJD 001-2019 Hygienic requirements for carrier disinfectants
- T/CITS 231-2025 The technology requirements for automotive lidar
- T/CAQI 181-2021 Technical requirements and test methods for vehicle-mounted air purifiers with disinfection function
- T/CSTE 0172-2021 Assessment requirements for forerunner standard - Vehicle-mounted air cleaner
- T/GZBC 12-2019 Car LED electronic road sign technical requirements
- T/HBMIF 004-2022 Technical requirements for on-board air conditioner of special vehicles
- T/ZGTXXH 049-2023 Technical requirements for IP bearer network controller
- T/CSAE 152-2020 Technical requirements of automotive audio video bridging(AVB)
- T/CIMA 0022-2020 Technical requirements for vehicle-mounted gas chromatography-mass spectrometer
- T/ITS 0012-2014 Technical requirements for in-vehicle communication access point
- T/CPHA 24-2023 Inspection requirements for port loader
- T/CIET 778-2024 Technical requirements for vehicle-mounted drones
- T/TIAA 031-2024 Technical requirements for in-vehicle mini programs
Professional Standard - Traffic
- JT/T 1435-2022 Requirements for loading cargoes on barge
- JT/T 813-2011 Technical requirements for the carriage of non-refrigerated liquefied gas tanks by ship
Shandong Provincial Standard of the People's Republic of China
- DB37/T 4095-2020 On-board hydrogen system installation technical requirements
- DB37/T 4096-2020 Technical requirements for air tightness testing and replacement of on-board hydrogen systems
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence
- GJB 5406-2005(XG1-2007) Electrical interface requirement of shipbased generalized launch control system to missiles
Professional Standard - Meteorology
- QX/T 614-2021 Technical requirements for airborne meteorological observing system on multi-rotor unmanned aerial vehicle
- QX/T 466-2018 Technical requirements for meteorological observation system carrying on micro fixed wing of unmanned aerial vehicle
Guangdong Provincial Standard of the People's Republic of China
- DB4403/T 365-2023 Container loading operation requirements
Professional Standard - Environmental Protection
- HJ 857-2017 Measurement method and technical specification for PEMS test of exhaust pollutants from heavy-duty diesel and gas fuelled vehicles
- HJ/T 292-2006 Equipment specifications and quality control requirements for diesel vehicles in lug down smoke test
Professional Standard - Post and Telecommunication
- YD/T 1746-2008 Security Protection Requirements for tne IP Bearer Network
- YD/T 1746-2014 Security protection requirements for the IP bearer network
- YD/T 1746-2013 Security protection requirements for the IP bearer network
Professional Standard - Aerospace
- QJ 3318-2008 Test Requirements of Onboard Computer
Professional Standard - Business
- SB/T 10674-2012 Technical specification for circulation of used loader
Professional Standard-Ships
- CB/T 4168-2011 Specifications of ballast tanks painting for ship
Professional Standard - Goods and Materials
- WB/T 1057-2015 Technical requirements of commercial vehicle car loading
Qinghai Provincial Standard of the People's Republic of China
- DB63/T 1498-2016 Requirements for records of observation and record of varieties of Scallops
Chongqing Provincial Standard of the People's Republic of China
- DB50/T 1476-2023 General technical requirements for on-board battery swapping systems for electric heavy-duty trucks
Türk Standardları Enstitüsü
- TS 2956-1978 ELECTRICAL INSTALLATIONS IN SHIPS GENERAL REQUIREMENTS
Association Francaise de Normalisation
- NF M88-726*NF EN 12979:2003 Automotive LPG-systems - Installation requirements.
- NF EN 13243:2015 Safety requirements for cable installations carrying people - Electrical devices other than drives
- NF EN IEC 62962:2019 Specific requirements for load shedders (LSE)
- NF EN 13116:2024 Curtain walling - Resistance to wind load - Performance requirements
- NF H00-073*NF EN 16210:2013 Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment
- NF P82-908:2004 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems.
- NF P82-908*NF EN 13243:2015 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
- NF P28-108*NF EN 13116:2024 Curtain walling - Resistance to wind load - Performance requirements
- NF J39-010:1984 Ro/ro ships. Stowage of laden commercial vehicles. General requirements.
- NF EN 16307-6:2014 Industrial trucks - Safety requirements and verification - Part 6: additional requirements for load trucks and personnel carriers
- NF M88-735*NF EN 13856:2002 Minimum requirements for the content of the user manual for automotive LPG systems
- NF P82-902-2*NF EN 12929-2+A1:2022 Safety requirements for cableway installations designed to carry persons - General requirements - Part 2 : Additional requirements for reversible bicable aerial ropeways without carrier truck brakes
- NF P82-902-1:2004 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1 : requirements for all installations.
- NF P82-902-2/IN1*NF EN 12929-2/IN1:2022 Safety requirements for cableway installations designed to carry persons - General requirements - Part 2 : Additional requirements for reversible bicable aerial ropeways without carrier truck brakes
COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)
- TCVN 5209-1990 Loading cranes.Safety requirements for electrical equipments
- TCVN 5206-1990 Loading cranes.Safety requirements for counter-weights and balast
Society of Automotive Engineers (SAE)
- SAE J2438-1998 Low-Temperature Cranking Load Requirements of an Engine - Air Starter Method
- SAE J2223/2_200310 Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 2: Tests and General Performance Requirements
- SAE J1742_202208 Connections for High Voltage On-Board Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements
- SAE J2223/2_199812 Connections for On-Board Road Vehicle Electrical Wiring Harnesses - Part 2: Tests and General Performance Requirements
- SAE J2223/2_201102 Connections for On-Board Road Vehicle Electrical Wiring Harnesses - Part 2: Tests and General Performance Requirements
- SAE J2223/2_200502 Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 2: Tests and General Performance Requirements
- SAE J2223/2_199402 Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 2: Tests and General Performance Requirements
- SAE J3248_202412 Worldwide On-Board Diagnostic Requirements Overview
- SAE J3248-2024 Worldwide On-Board Diagnostic Requirements Overview
- SAE J1742-2022 Connections for High Voltage On-Board Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements
- SAE J1742-2005 Connections for High Voltage On-Board Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements
- SAE J3248_202402 Worldwide On-Board Diagnostic Requirements Overview
- SAE ARP1409A Aircraft On Board Weight and Balance System Requirements
- SAE J1253_198603 Low-Temperature Cranking Load Requirements of An Engine
- SAE J1253_199306 Low-Temperature Cranking Load Requirements of An Engine
- SAE J1253_197902 Low-Temperature Cranking Load Requirements of An Engine
- SAE ARP1409 Aircraft On Board Weight and Balance System Requirements
- SAE ARP1409C Aircraft On Board Weight and Balance System Requirements
- SAE ARP1409B Requirements for Aircraft on Board Weight and Balance System
GM Europe
- GME L/R-1J/K-3-2008 Requirements for protection against load
Instituto Colombiano de Normas Técnicas y Certificación
- ICONTEC 1256-1981 Rubber, gas wheels, load, pressure and dimensional requirements
Polski Komitet Normalizacyjny (PKN)
- PN M47003-02-1991 Single-bucket construction loaders General requirements
Standard Association of Australia (SAA)
- AS 2326.1:1980 On-load tap-changers - Requirements
- AS 2326.1:1991 On-load tap-changers - Requirements
Det Norske Veritas (DNV)
- DNV-ST-0010-2022 Competency requirements for onboard cargo operators (LNG carriers)
Ente Nazionale Italiano di Unificazione
- UNI EN 16210:2013 Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment
- UNI ISO 14518:2006 Cranes - Requirements for test loads
- UNI EN 13116:2024 Curtain walling - Resistance to wind load - Performance requirements
- UNI EN 13243:2007 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
- EC 1-2015 UNI EN 13243:2015 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
- UNI EN 13116:2002 Curtain walling - Resistance to wind load - Performance requirements
- UNI EN 12929-1:2007 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations
- UNI EN 12929-1:2023 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations
- UNI EN 12929-1:2015 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations
GB-REG
- REG 14 CFR PART 460-2012 HUMAN SPACE FLIGHT REQUIREMENTS
- REG NASA-STD-8719.24 ANX W/CHG 2-2012 ANNEX TO NASA-STD 8719.24 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS: REQUIREMENTS TABLE
- REG NASA-STD-8719.24 ANX-2011 ANNEX TO NASA-STD 8719.24 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS: REQUIREMENTS TABLE
- REG NASA-STD-8719.24-2011 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
- REG NASA-STD-8719.24 W/CHG 1-2011 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
British Standards Institution (BSI)
- BS 2N 2:1989 Specification for general requirements for construction and performance of airborne chemical oxygen generators
- BS 2N 2:1989(1999) Specification for General requirements for construction and performance of airborne chemical oxygen generators
- BS CP 3 CHAPTER V:1952 Code of Functional Requirements of Buildings. Loading
- BS EN 13116:2024 Curtain walling. Resistance to wind load. Performance requirements
- BS EN IEC 62962:2019 Particular requirements for load-shedding equipment (LSE)
- BS EN 12929-1:2004 Safety requirements for cableways installation designed to carry persons - General requirements - Requirements for all installations
- 17/30353793 DC BS EN 474-3. Earth-moving machinery. Safety. Part 3. Requirements for loaders. - Part 3: Requirements for loaders
- BS EN 13243:2004 Safety requirements for cableways installation designed to carry persons - Electrical equipment other than for drive systems
- BS EN 60704-2-2:2010 Household and similar appliances - Test code for the determination of airborne acoustical noise - Particular requirements for fan heaters
- BS EN 474-3:2022 Earth-moving machinery. Safety - Requirements for loaders
- BS EN 60704-1:2010+A11:2012 Household and similar electrical appliances. Test code for thedetermination of airborne noise. General requirements
- BS ISO 20474-3:2017 Earth-moving machinery. Safety. Requirements for loaders
- BS EN 60704-2-7:1998 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Particular requirements - Particular requirements for fans
- BS EN 60704-2-1:2001 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Particular requirements - Particular requirements for vacuum cleaners
- BS ISO 22772:2020 Space systems. Requirements of launch vehicle (LV) to electrical ground support equipment (EGSE) interfaces
- BS EN 60704-2-1:2015 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for vacuum cleaners
- BS EN 250:2000 Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking
- BS MA 87-2:1985 Series 1 shipborne barges. Specification for principal technical requirements
Korean Agency for Technology and Standards (KATS)
- KS B 6283-2021 Design requirements for wind load and seismic load of oil storage tanks
- KS B ISO 14518:2017 Cranes-Requirements for test loads
- KS B ISO 14518:2022 Cranes — Requirements for test loads
- KS B 6283-2016(2021) Design requirements for wind load and seismic load of oil storage tanks
- KS B 6283-2016 Design requirements for wind load and seismic load of oil storage tanks
- KS B ISO 14518-2017 Cranes-Requirements for test loads
- KS B ISO 14518-2022 Cranes — Requirements for test loads
- KS B ISO 14518:2012 Cranes-Requirements for test loads
- KS V ISO 9382:2008 Shipborne barges, all series-Classification and main requirements
- KS V ISO 9382:2013 Shipborne barges, all series-Classification and main requirements
- KS V ISO 9382-2023 Shipborne barges, all series-Classification and main requirements
- KS B 4306-2-2021 Cranes — Requirements for overload limiting device of loader cranes
- KS V ISO 9382-2013(2023) Shipborne barges, all series-Classification and main requirements
Association for Electrical, Electronic & Information Technologies (VDE)
- VDE V 0115-490-2009*DIN CLC TS 50467:2009 Requirements and test methods for electrical connectors for vehicles used in railway applications
Bureau of Indian Standards
- IS 11167-2011 Aircraft Ground Equipment —— Lower Deck Loader Functional Requirements Loader —— Functional Requirements
German Institute for Standardization
- DIN EN 1175-2:2011 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks; German version EN 1175-2:1998+A1:2010
- DIN EN 13116:2024 Curtain walling - Resistance to wind load - Performance requirements
- DIN EN 13116:2024-04 Curtain walling - Resistance to wind load - Performance requirements; German version EN 13116:2024
- DIN EN 13116:2022-10 Curtain walling - Resistance to wind load - Performance requirements; German and English version prEN 13116:2022 / Note: Date of issue 2022-09-09*Intended as replacement for DIN EN 13116 (2001-11).
- DIN EN 13116:2022 Curtain walling - Resistance to wind load - Performance requirements; German and English version prEN 13116:2022
- DIN EN 16210:2013-05 Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment; German version EN 16210:2013
- DIN EN 13116:2001-11 Curtain walling - Resistance to wind load - Performance requirements; German version EN 13116:2001 / Note: To be replaced by DIN EN 13116 (2022-10).
- DIN 15460:1979-07 Load box for building materials; safety requirements
- DIN EN 17321 E:2018-12 Minimum requirements and tests for inter-transport load units and truck loading stability
- DIN EN 16210 E:2010 Draft Document - Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment; German version prEN 16210:2010
- DIN EN 1175-3:2011 Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks; German version EN 1175-3:1998+A1:2010
- DIN EN 12929-1:2023 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations; German version EN 12929-1:2015+A1:2022
- DIN EN 13243:2005 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems; German version EN 13243:2004
National Aeronautics and Space Administration (NASA)
- NASA-STD-7002 REV A-2004 PAYLOAD TEST REQUIREMENTS
Gosstandart of Russia
- GOST 33167-2014 Hydraulic loader cranes. Safety requirements
- GOST R 52624-2006 Passenger lifts. Requirements for vandal resistance
- GOST R 54768-2011 Cranes. Reguirements for test loads
Federal Aviation Administration (FAA)
- FAA 14 CFR PART 460-2011 HUMAN SPACE FLIGHT REQUIREMENTS
The Directorate General of Specifications and Metrology (DGSM)
- OS GSO ISO 14518:2007 Cranes – Requirements For Test Loads
Czech Standards Institute (UNMZ)
- CSN 18 5606-1980 Analog pneumatic eIements. Manuál loading stations. Technical requirements. Testíng methods
International Organization for Standardization (ISO)
- ISO 9382:1990 Shipborne barges, all series; classification and main requirements
- ISO 14518:2005 Cranes - Requirements for test loads
- ISO 9382 Shipborne barges, all series - Classification and main requirements
- ISO/CD 8092-6 Road vehicles — Connections for on-board electrical wiring harnesses — Part 6: In-vehicle Ethernet, general performance requirements and interface definitions
- ISO/DIS 8092-6:2023 Road vehicles — Connections for on-board electrical wiring harnesses — Part 6: In-vehicle Ethernet, general performance requirements and interface definitions
- ISO 22772:2020 Space systems — Requirements of launch vehicle (LV) to electrical ground support equipment (EGSE) interfaces
European Committee for Standardization (CEN)
- EN 13116:2024 Curtain walling - Resistance to wind load - Performance requirements
- EN 16210:2013 Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment
Comitato Elettrotecnico Italiano
- CEI EN IEC 62962:2020 Particular requirements for load-shedding equipment(LSE)
Swedish Institute for Standards
- SS-EN 13116:2001 Curtain walling - Resistance to wind load - Performance requirements
- SS-EN IEC 62962:2020 Particular requirements for load-shedding equipment (LSE)
- SS-EN 13243:2004 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
- SIS SS-EN 137-1990 Respiratory protective devices — Self-contained open-circuit compressed air breathing apparatus — Requirements, testing, marking
- SS-EN 12929-1:2015+A1:2023 Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations
- SS-EN 16210:2013 Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment
Lithuanian Standards Office
- LST EN 13116-2002 Curtain walling - Resistance to wind load - Performance requirements
- LST EN 13243-2004 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
- LST EN 13243-2004/AC-2005 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
- LST EN 13243-2015 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
International Electrotechnical Commission (IEC)
- IEC 62962:2019 Particular requirements for load-shedding equipment (LSE)
Danish Standards Foundation
- DANSK DS/EN 13116:2001 Curtain walling - Resistance to wind load - Performance requirements
- DS/EN 13116:2001 Curtain walling - Resistance to wind load - Performance requirements
- DANSK DS/EN 16210:2013 Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment
- DS/EN 13243:2005 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
- DS/EN 13243/AC:2005 Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
- DANSK DS/EN IEC 62962:2019 Particular requirements for load-shedding equipment (LSE)
- DS/EN 16210:2013 Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment
- DS 906:1983 Industrial truck. Capacity marking. Requirements
- DANSK DS/EN 12929-1+A1:2023 Safety requirements for cableway installations designed to carry persons – General requirements – Part 1: Requirements for all installations
- DANSK DS/EN 12929-2+A1:2022 Safety requirements for cableway installations designed to carry persons – General requirements – Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes
Spanish Association for Standardization (UNE)
- AENOR UNE-EN 13116:2001 Curtain walling - Resistance to wind load - Performance requirements.
- UNE-EN 13116:2001 Curtain walling - Resistance to wind load - Performance requirements.
- UNE-EN IEC 62962:2021 Particular requirements for load-shedding equipment (LSE)
- UNE-EN 16210:2013 Transportation loads - Measurement and evaluation of climatic and other loads - Data acquisition and general requirements for measuring equipment
American Nuclear Society (ANS)
- ANS 56.8-2020 Containment System Leakage Testing Requirements
- ANS 56.8-2002 Containment System Leakage Testing Requirements
Standards Norway
- NS-EN 13116:2001 Curtain walling - Resistance to wind load - Performance requirements
- NS-EN 16210:2013 Transportation loads — Measurement and evaluation of climatic and other loads — Data acquisition and general requirements for measuring equipment
- NS-EN 12929-1:2004 Safety requirements for cableway installations designed to carry persons — General requirements — Part 1: Requirements for all installations
- NS-EN 12929-1:2015+A1:2022 Safety requirements for cableway installations designed to carry persons — General requirements — Part 1: Requirements for all installations
European Committee for Electrotechnical Standardization(CENELEC)
- EN IEC 62962:2019 Particular requirements for load-shedding equipment (LSE)
Kingdom of Bahrain Testing and Metrology Directorate
- BH GSO ISO 9382:2016 Shipborne barges, all series -- Classification and main requirements
Verband der Automobilindustrie e. V.(VDA)
- VDA 320-2014 Electric and Electronic Components in Motor Vehicles 48 V On-Board Power Supply - Requirements and Tests
- VDA 320-2015 Electric and Electronic Components in Motor Vehicles 48 V On-Board Power Supply Requirements and Tests
GCC Standardization Organization
- GSO ISO 9382:2013 Shipborne barges, all series -- Classification and main requirements
- GSO ISO 24354:2024 General requirements for the payload interface of civil unmanned aircraft systems
- GSO 1676:2003 Electric lifts for passenger or goods - Part 3: erection requirement.
- GSO 1675:2003 Electric lifts for passenger or goods - Part 2: safety requirement.
Canadian Standards Association (CSA)
- CSA M682-2004(R2019) Agricultural Front-End Loaders - Safety Requirements
- CAN/CSA-M682-2004(C2019) Agricultural Front Loading Devices: Safety Requirements
- CAN/CSA-M682-2004(R2019) Agricultural Front-End Loaders - Safety Requirements
Magyar Szabványügyi Testület
- MSZ 6830/14-1984 Safety technical requirements for manned cables
Association of German Mechanical Engineers
- VDI 3968 Blatt 1-2009 Sicherung von Ladeeinheiten - Anforderungsprofil
Austrian Standards
- ONORM M 6220 Teil.1-1984 Requirements for whirlpools with partial load; design and Operation
- ONORM EN 250-1993 Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requirements, testing, marking
Indonesia Standards
- SNI 13-4696-1998 Quality requirement for urea fertilizer carrier
carrier gas,Carrier gas flow,Gas phase carrier gas,carrier gas,gas phase + carrier gas,Carrier Gas Requirements,Carrier gas requirements,Gas phase carrier gas,airborne gas,Carrier gas sample gas,airborne gas,Gas phase carrier gas,airborne,and carrier gas requirements,Carrier gas phase,Sample carrier gas,Carrier gas sample gas,sample carrier gas,What is the carrier gas