relative check

relative check, Total:70 items.

The international standard classification for "relative check" includes: Hydraulic energy engineering , Geology. Meteorology. Hydrology , Non-destructive testing of metals .

The Chinese standard classification for "relative check" includes: Optical Measurement , Water conservancy and water power engineering in general , Hydrology and water conservancy instrument , Metal nondestructive testing method , Measuring tool and instrument .

Professional Standard - Aerospace

QJ 2040.2-1991修改单 Calibration methods for standard leaks versus calibration methods
QJ 2040.1-1991修改单 Calibration method for standard leak Absolute calibration method
QJ 2040.2-1991 Calibration methods for standard leaks versus calibration methods

National Metrological Technical Specifications of the People's Republic of China

JJF 1150-2006 Calibration Specification for Relative Spectral Responsivity for Photoelectric Detectors
JJF(机械) 027-2008 Calibration Specifications for Relative Aperture Testers
JJF 2117-2024 Calibration Specification for Test Apparatus for Theoretical Maximum Specific Gravity of Asphalt Mixtures

Professional Standard - Electricity

DL/T 1787-2017 Calibration specification of relative dissipation factor and capacitance tester

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40961-2021 Calibration methods of rock triaxial testing apparatus

Professional Standard - Water Conservancy

SL 237-010-1999 Code for test of soil - relative density test
SL 110-1995 Calibrating Methods of Soil Testing Instrument
SL 119-2012 Calibrating Methods of Rock Triaxial Testing Apparatus
SL 144.10-2008 calibration methods of water environmental detecting instrument and equipment calibration method of solid-phase extractor(spe)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11259-1999 STANDARD practice for fabrication and control of steel reference blocks used in ultrasonic inspection
GB/T 12310-1990 Sensory analysis method - Paired comparison test

Professional Standard - Aviation

HB 1996-1989 Calibration gauges and gaskets for gauge parts
HB 3899-1986 Regular Screw Thread Master Plug Gauge M1×0.2~M5 Master Through-Dead TZ Master Through-Damage TS
HB 1995-1989 Calibration gauges and gaskets for gauge parts
HB 4652-1992 Template and Checking Template
HB 2401-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass YT d=105~150mm
HB 3901-1986 Regular Screw Thread Master Plug Gauge M52×1~M100×2 Master Through-Dead TZ Master Through-Damage TS
HB 2399-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass TY d=6~48mm
HB 3895-1986 Regular Screw Thread Master Plug Gauge M1×0.2~M5 Master Through-Through TT
HB 4231-1989 MJ Calibration Thread Gauge: Calibration Stop-Through ZT; Calibration Stop-Stop ZZ; Calibration Stop-Damage ZS (MJ 1.6×0.35~MJ 5×0.8 )
HB 2445-1979 Sample and proofreading sample inspection HB 2444-79 slot milling cutter
HB 3903-1995 Ordinary thread calibration plug gauge M2~M5 Calibration stop - through ZT Calibration stop - stop ZZ Calibration stop - loss ZS
HB 2398-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass TY d=1~5mm
HB 742-1979 Sample and proofreading sample inspection HB 735-79 slot milling cutter
HB 3904-1995 Ordinary thread calibration plug gauge M6×0.5~M48×2 Calibration stop-pass ZT Calibration stop-stop ZZ Calibration stop-damage ZS
HB 3906-1995 Regular Screw Thread Master Plug Gauge M105×1.5~M105×2 ZT, ZZ and ZS
HB 1996-1974 Calibration gauges and gaskets for gauge parts
HB 4232-1989 MJ Calibration Thread Gauge: Calibration Stop-Through ZT; Calibration Stop-Stop ZZ; Calibration Stop-Damage ZS (MJ 6×1~MJ 39×2)
HB 1995-1974 Calibration gauges and gaskets for gauge parts
HB 4229-1989 MJ Calibration Thread Gauge: Calibration Through-Stop TZ; Calibration Through-Damage TS (MJ 1.6×0.35~MJ 5×0.8)
HB 3904-1986 Ordinary thread calibration plug gauge M6×0.5~M48×2 Calibration stop-pass ZT Calibration stop-stop ZZ Calibration stop-damage ZS
HB 2242-1976 Sample and proofreading sample inspection HB 2244-76 slot milling cutter
HB 2243-1976 Sample and proofreading sample inspection HB 2245-76 slot milling cutter
HB 3906-1986 Ordinary thread calibration plug gauge M105×1.5~M150×2 Calibration-pass ZT Calibration-stop ZZ Calibration-damage ZS
HB 2400-1977 HB 242-70 Thread Calibration Plug Gauge Calibration-Stop TZ, Calibration-Loss TS, Verification-Pass TY d=52~100mm
HB 4230-1989 MJ Calibration Thread Gauge: Calibration Through-Stop TZ; Calibration Through-Damage TS (MJ 6×1~MJ 39×2)
HB 3903-1986 Ordinary thread calibration plug gauge M2~M5 Calibration stop-pass ZT Calibration stop-stop ZZ Calibration stop-damage ZS
HB 3905-1986 Ordinary thread calibration plug gauge M52×1~M100×2 Proof-pass ZT Proof-stop ZZ Proof-stop ZS

Taiwan Provincial Standard of the People's Republic of China

CNS 3927-1996 Proofreading symbols
CNS 11365-1985 Method of Test for Relative Zeolite Diffraction Intensities

机械工业部

JB/T 7913-1995 Preparation and verification methods of steel comparison test blocks for ultrasonic testing

Professional Standard - Petroleum

SY/T 6406-1999 Maintenance and inspection for magnetic single - shot & multi - shot survey instruments

SCC

NISO Z39.22-1989 Proof Corrections
NS 899:1956 Symbols for proof-reading
CEI 45-11:1997 Standardized test methods for semiconductor radiation detectors and related amplifiers and preamplifiers
BS 1219:1945 Printers and authors proof corrections

PT-IPQ

NP 2940-1991 Cold potable water meters Reference calibrated devices. General characteristics

American Society for Testing and Materials (ASTM)

ASTM E2911-23 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM E2911-13 Standard Guide for Relative Intensity Correction of Raman Spectrometers
ASTM D5917-99 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM D5917-02 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

Japanese Industrial Standards Committee (JISC)

JIS Z 8208:1965 Proofreader's marks
JIS Z 2340:2002 Confirmation method of calibration by visual calibration gauge on magnetic particle and liquid penetrant testing
JIS Z 8208:2007 Symbols for text correction

NO-SN

NS 899-1956 Symbols for proof-reading

Association Francaise de Normalisation

NF X50-061:2000 General requirements for the competence of testing and calibration laboratories.

RU-GOST R

GOST R 56343-2015 Monocyclic aromatic hydrocarbons. Determination of trace Impurities by gas chromatography test method using the external calibration

British Standards Institution (BSI)

BS 6955-9:1994 Calibration of vibration and shock pick-ups - Method for secondary vibration calibration by comparison of phase angles

API - American Petroleum Institute

API MPMS 11.1 VOL V-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume V Table 23B - Generalized Products Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24B - Generalized Products Correction of Volume
API MPMS 11.1 VOL IV-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume IV Table 23A - Generalized Crude Oils Correction of Observed Relative Density to Relative Density 60/60 Degrees F Table 24A - Generalized Crude Oils Correction of Vo

International Electrotechnical Commission (IEC)

IEC TR 62062/COR2:2002 Results of the Round Robin series of tests to evaluate proposed amendments to IEC 60112

NL-NEN

NEN 632-1988 Symbols for text correction

FI-SFS

SFS 2324 Proofreading of published readings

Standard Association of Australia （SAA）

AS ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories

ZA-SANS

SANS 10378:2005 General requirements for the competence of verification laboratories in terms of the Trade Metrology Act

German Institute for Standardization

DIN 16527-1:1993 Printing technology; control patch, control image, control mark; terms

Korean Agency for Technology and Standards (KATS)

KS B ISO 7500-2:2013 Metallic materials－Verification of static uniaxial testing machines－Part 2：Tension creep testing machines－Verification of the applied load