Methods of Underwater Target Locating

Methods of Underwater Target Locating, Total:280 items.

The international standard classification for "Methods of Underwater Target Locating" includes: Fruits and derived products , Textile floor coverings , Brazing and soldering , Acoustics and acoustic measurements .

The Chinese standard classification for "Methods of Underwater Target Locating" includes: Hydrogeological survey , Beverages in general , Blankets , Welding and cutting , Chemical reagent in general , Underwater sound equipment , Analysis methods for toxic substances in water .

Professional Standard - Nuclear Industry

EJ/T 910-1994 U ₃ Si ₂ -Al fuel plate core positioning method

Military Standard of the People's Republic of China-General Armament Department

GJB 6776.4-2009 Method for space object detection and catalogue.Part 4:Orbit determination method
GJB 5422-2005 Testing method of military electronic devices for γ-ray total dose radiation
GJB 4328-2002 Method for evaluating performation of solving target motion data by use of submarine only-bearing principel
GJB 6635-2008 Measurement method for infrared radiation feature of target and background by means of airborne downward looking

Professional Standard - Geology

DZ/T 0064.90-2021 Methods for analysis of groundwater quality- Part 90: Determination of δ18O- Online method for CO2-H2O equilibration -gas isotope ratio mass spectrometry
DZ/T 0064.45-1993 Groundwater quality test methods - the determination of boron with mannit-alkaalimetric titration method
DZ/T 0064.43-2021 Methods for analysis of groundwater quality - Part 43: Determination of acidity- Titrimetric method
DZ/T 0064.43-1993 Groundwater quality test methods - the determination of acidity with titrimetry
DZ/T 0064.8-1993 Groundwater quality test methods - the determination of suspended matters
DZ/T 0064.4-1993 Groundwater quality test methods - the determination of colour shade
DZ/T 0064.7-2021 Methods for analysis of groundwater quality- Part 7: Determination of oxidation-reduction potential Potential method
DZ/T 0064.50-1993 Groundwater quality test methods - the determination of chloride with argentometric titration
DZ/T 0064.87-2021 Methods for analysis of groundwater quality- Part 87: Determination of δ13C - Online method for acidolysis by phosphoric acid- gas isotope ratio mass spectrometry
DZ/T 0064.6-1993 Groundwater quality test methods - the determination of electrical conductivity
DZ/T 0064.3-1993 Groundwater quality test methods - temperature determination
DZ/T 0064.89-2021 Methods for analysis of groundwater quality- Part 89: Determination of deuterium- Online high temperature conversion-gas isotope ratio mass spectrometry
DZ/T 0064.78-2021 Methods for analysis of groundwater quality-Part 78: Determination of deuterium-Reduction method of metal zinc-gas isotope ratio mass spectrometry
DZ/T 0064.77-2021 Methods for analysis of groundwater quality-Part 77: Determination of δ18O- CO2-H2O equilibration-gas isotope ratio mass spectrometry
DZ/T 0064.4-2021 Methods for analysis of groundwater quality- Part 4: Determination of chromaticity- Platinum-cobalt standard colorimetric method
DZ/T 0064.19-1993 Groundwater quality test methods - the determination of copper with catalytic polarography
DZ/T 0064.77-1993 Groundwater quality test methods - the determination ofoxygen isotope with CO2-H2O balance method
DZ/T 0064.7-1993 Groundwater quality test methods - the determination of Eh value

Professional Standard - Urban Construction

CJ 26.1-1991 Municipal sewage water quality inspection method standard pH value determination potentiometer method

Group Standards of the People's Republic of China

T/QAS 058-2021 Potentiometric titration method for determination of chlorine in brine
T/CSNAME 017.2-2021 Specification of security system on offshore oil and gas fields—Part 2: Underwater multi-target remote detection and positioning system
T/SXDZ 046-2020 Compilation and Forecast Method of Groundwater Level Data in Coal Mine
T/CSNAME 017.3-2021 Specification of security system on offshore oil and gas fields—Part 3：Middle range underwater multi-targets detection and positioning system

Professional Standard - Light Industry

QB/T 4855-2015 Determination of the oxygen isotope ratio (180/160) of water in fruit juices. Method using isotopic equilibrium exchange reaction

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15964-2008 Carpets - Determination of number of tufts or loops per unit length and per unit area
GB/T 6911.3-1986 Methods for analysis of water for boiler and for cooling--The determination of sulfate--Potentiometric titration method
GB/T 14671-1993 Water quality--Determination of barium--Potentiometric titration method
GB/T 31014-2014 Acoustics―Laboratory methods of underwater target strength measurement
GB/T 6905.2-1986 Methods for analysis of water for boiler and for cooling--The determination of chloride--Potentiometric titration
GB/T 38265.3-2022 Test methods for soft soldering fluxes—Part 3:Determination of acid value—Potentiometric and visual titration methods

Shanghai Provincial Standard of the People's Republic of China

DB31/T 47-1999 Quota and index of consumed water of unit product for paper and paper board and its calculating method

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5089-2002 Calculation method for the resolution and the target's pixel position of satellite-borne synthetic aperture radar

Professional Standard - Chemical Industry

HG/T 2347.5-1992 Determination of Water-soluble Sulfate in γ?Fe(Index 2)O(Index 3) Magnetic Powder
HG/T 2347.6-1992 Determination of Water-soluble Chloride in γ?Fe(Index 2)O(Index 3) Magnetic Powder

Professional Standard - Electron

SJ 2799-1987 Method for determination of trace water in electronic grade gases--Dew point method

未注明发布机构

DWA-M 181:2011-09 Measuring water levels and flows in sewer systems

Professional Standard - Environmental Protection

HJ 489-2009 Water quality - Determination of silver - Spectrophotometric method with 3,5-Br2-PADAP

British Standards Institution (BSI)

BS ISO 21413:2006 Manual methods for the measurement of a groundwater level in a well
BS ISO 21413:2005 Manual methods for the measurement of a groundwater level in a well
DD ENV 12141-1997 Method for determination of stable oxygen isotope ratio ( O/ O) of water from fruit juices, using isotope ratio mass spectrometry
DD ENV 12142-1997 Method for determination of stable hydrogen isotope ratio ( H/ H) of water from fruit juices, using isotope ratio mass spectrometry
BS EN ISO 9455-3:2020 Soft soldering fluxes. Test methods - Determination of acid value, potentiometric and visual titration methods
BS ISO 18632:2018 Alloyed steels. Determination of manganese. Potentiometric or visual titration method
DD ENV 12140-1997 Method for determination of stable carbon isotope ratio ( C/ C) of sugars from fruit juices, using isotope ratio mass spectrometry
BS EN ISO 4937:2024 Steel and iron. Determination of chromium content. Potentiometric or visual titration method
BS EN 24937:1991 Steel and iron. Determination of chromium content. Potentiometric or visual titration method
09/30196558 DC BS ISO 18632. Alloyed steel. Determination of manganese. Potentiometric and visual titration method
23/30445124 DC BS ISO 7447 Underwater acoustics. Measurement of radiated underwater sound from percussive pile driving. In- situ determination of the insertion loss of barrier control measures underwater
BS PD ISO/TS 21476:2018 Road vehicles. Displacement calibration method of IR-TRACC devices
PD ISO/TS 21476:2018 Road vehicles. Displacement calibration method of IR-TRACC devices

International Organization for Standardization (ISO)

ISO 21413:2005 Manual methods for the measurement of a groundwater level in a well
ISO/CD TS 13604:2023 Underwater acoustics — Standard-target method of calibrating active sonars for imaging and measuring scattering
ISO 9455-3:2019 Soft soldering fluxes — Test methods — Part 3: Determination of acid value, potentiometric and visual titration methods
ISO/CD 4937:2023 Steel and iron — Determination of chromium content — Potentiometric or visual titration method
ISO 18632:2010 Alloyed steel - Determination of manganese - Potentiometric and visual titration method
ISO 18632:2018 Alloyed steels - Determination of manganese - Potentiometric or visual titration method
ISO/CD 7447 Underwater acoustics — Measurement of radiated underwater sound from percussive pile driving — In-situ determination of the insertion loss of barrier control measures underwater
ISO 6778:1984 Water quality; Determination of ammonium; Potentiometric method

GCC Standardization Organization

GSO ISO 21413:2007 Manual methods for the measurement of a groundwater level in a well
GSO ISO 4937:2015 Steel and iron -- Determination of chromium content -- Potentiometric or visual titration method

Korean Agency for Technology and Standards (KATS)

KS I ISO 21413:2022 Manual methods for the measurement of a groundwater level in a well
KS I ISO 21413-2022 Manual methods for the measurement of a groundwater level in a well
KS D ISO 4937-2002(2017) Steel and iron－Determination of chromium content－Potentiometric or visual titration method
KS I ISO TR 23211-2024 Hydrometry — Measuring the water level in a well using automated pressure transducer methods
KS B ISO 9455-3-2022 Soft soldering fluxes — Test methods — Part 3: Determination of acid value, potentiometric and visual titration methods
KS B ISO 9455-3-2002(2017) Soft soldering fluxes－Test methods－Part 3：Determination of acid value, potentiometric and visual titration methods
KS D ISO 4937-2022 Steel and iron－Determination of chromium content－Potentiometric or visual titration method
KS D ISO 4937-2002(2022) Steel and iron－Determination of chromium content－Potentiometric or visual titration method
KS B ISO 9455-3:2022 Soft soldering fluxes — Test methods — Part 3: Determination of acid value, potentiometric and visual titration methods
KS D ISO 4937:2002 Steel and iron－Determination of chromium content－Potentiometric or visual titration method
KS D ISO 18632-2023 Alloyed steel — Determination of manganese — Potentiometric or visual titration method
KS I ISO 6778-2007(2017) Water quality－Determination of ammonium－Potentiometric method
KS F 2597-2011(2021) Standard test method for water penetration depth into concrete under pressure
KS I ISO 6778-2023 Water quality — Determination of ammonium — Potentiometric method
KS I ISO 6778:2007 Water quality－Determination of ammonium－Potentiometric method
KS F 2597-2021 Standard test method for water penetration depth into concrete under pressure

Bureau of Indian Standards

IS 15896-2011 Manual Methods for Measurement of Ground Water Level in a Well

European Telecommunications Standards Institute (ETSI)

ETSI EG 201 872-2001 Methods for Testing and Specification (MTS); Methodological Approach to the Use of Object-Orientation in the Standards Making Process (V1.2.1)

Aeronautical Radio Inc.

ARINC SPECIFICATION 677-2015 Installation Standards for Low Frequency Underwater Locator Beacon (LF-ULB) ARINC Specification 677

Society of Automotive Engineers (SAE)

SAE ARINC677-2015 INSTALLATION STANDARDS FOR LOW FREQUENCY UNDERWATER LOCATOR BEACON (LF-ULB)
SAE ARINC677 INSTALLATION STANDARDS FOR LOW FREQUENCY UNDERWATER LOCATOR BEACON (LF-ULB)
SAE AS8045-1993 MINIMUM PERFORMANCE STANDARD for UNDERWATER LOCATING DEVICES (ACOUSTIC) (Self-Powered)
SAE AS8045A Minimum Performance Standard for Underwater Locating Devices (Acoustic) (Self-Powered)
SAE AS8045 Minimum Performance Standard for Underwater Locating Devices (Acoustic) (Self-Powered)
SAE AS6254 Minimum Performance Standard for Low Frequency Underwater Locating Devices (Acoustic) (Self-Powered)
SAE AS8045-1988 Minimum Performance Standard for Underwater Locating Devices (Acoustic) (Self- Powered)
SAE AS6254A-2015 Minimum Performance Standard for Low Frequency Underwater Locating Devices (Acoustic) (Self-Powered)
SAE AS8045A-2011 Minimum Performance Standard for Underwater Locating Devices (Acoustic) (Self-Powered)
SAE AS6254A Minimum Performance Standard for Low Frequency Underwater Locating Devices (Acoustic) (Self-Powered)
SAE AS6254-2012 Minimum Performance Standard for Low Frequency Underwater Locating Devices (Acoustic) (Self-Powered)

Association Francaise de Normalisation

NF P98-600:1999 Horizontal road marking. Markings applied on roads. Sampling methods for in situ test method.
NF EN ISO 4937:2024 Steel and iron - Determination of chromium content - Potentiometric or visual titration method
NF A06-329*NF EN 24937:1990 Steel and iron. Determination of chromme content. Potentiometric or visual titration method.
NF EN ISO 9455-3:2020 Soft soldering flux - Test methods - Part 3: determination of acid number by potentiometric and visual titration methods

American Water Works Association (AWWA)

AWWA 51478 Design-Build Approach for Groundwater Color Removal Project
AWWA ACE63035 Life on the Bubble: Using a Groundwater Model to Determine Locations and Design of Production Wells Near SAWS ASR Project
AWWA ACE61708 Application of Membrane Technologies to Meet Surface Water and Groundwater Quality Objectives
AWWA ACE94040 A Statistical Approach to Determine Ground Water Sources Under the Direct Influence of Surface Water
AWWA JAW64702 Journal AWWA — Policy Objectives in Designing Water Rates

American Society for Testing and Materials (ASTM)

ASTM D6000-96(2008) Standard Guide for Presentation of Water-Level Information from Groundwater Sites
ASTM D6000-15 Standard Guide for Presentation of Water-Level Information from Groundwater Sites
ASTM D6000/D6000M-15e1 Standard Guide for Presentation of Water-Level Information from Groundwater Sites
ASTM D4750-87(1993)e1 Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well)
ASTM D4750-87(2001) Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well)
ASTM D1498-08 Standard Test Method for Oxidation-Reduction Potential of Water
ASTM D1498-14 Standard Test Method for Oxidation-Reduction Potential of Water
ASTM D6000-96(2002) Standard Guide for Presentation of Water-Level Information From Ground-Water Sites
ASTM D6000-96e1 Standard Guide for Presentation of Water-Level Information From Ground-Water Sites
ASTM D5413-93(2002) Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
ASTM D5413-21 Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
ASTM D5413-93(2007) Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
ASTM D7877-22 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
ASTM D7937-15(2023) Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water
ASTM D5413-93(2013) Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
ASTM D7342-07 Standard Test Method for Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)
ASTM D5410-93(1998) Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Three-Usage Descriptors
ASTM D5410-93(2007) Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Three-Usage Descriptors
ASTM D1498-14(2022)e1 Standard Test Method for Oxidation-Reduction Potential of Water
ASTM D5413-93(1997) Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
ASTM D5855/D5855M-20 Standard Practice for (Analytical Procedure) Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
ASTM D6470-99 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D6470-99(2010) Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM D6470-99(2004) Standard Test Method for Salt in Crude Oils (Potentiometric Method)
ASTM C1138M-05(2010)e1 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
ASTM C1138M-05 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
ASTM E2679-22 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration
ASTM C1138M-19 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
ASTM C1214-02 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM C1138M-12 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
ASTM D3801-10 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D6452-18(2023) Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations
ASTM D7877-24 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes (Standard + Redline PDF Bundle)
ASTM D7315-12 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
ASTM D7315-07a Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
ASTM C1214-02(2009) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM D3972-09 Standard Test Method for Isotopic Uranium in Water by Radiochemistry
ASTM C1214-13 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
ASTM D7315-17(2023) Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
ASTM D7315-07 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
ASTM D4448-01 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D8296-19 Standard Test Method for Consolidated Undrained Cyclic Direct Simple Shear Test under Constant Volume with Load Control or Displacement Control
ASTM D7315-17 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
ASTM D3080/D3080M-11 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
ASTM C1138-97 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
ASTM D7877-14 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
ASTM D635-10 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
ASTM D7342-15 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
ASTM D4739-17 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM F1832-97(2002) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM C563-13 Standard Test Method for Approximation of Optimum SO 3 in Hydraulic Cement Using Compressive Strength
ASTM C1891-19e1 Standard Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
ASTM C1891-20 Standard Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
ASTM D4778-94(1999)e1 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
ASTM C1891-19 Standard Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
ASTM C1214M-02 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
ASTM D6452-99(2012)e1 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations
ASTM D3080-04 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
ASTM C1214M-02(2009) Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
ASTM C1214M-13 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
ASTM D5786-95(2006) Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
ASTM D3972-09(2015) Standard Test Method for Isotopic Uranium in Water by Radiochemistry
ASTM D6312-98(2012)e1 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs
ASTM D4778-15 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
ASTM D5776-07e1 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
ASTM D4785-08(2013)e1 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water
ASTM D7007-09 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials
ASTM D4739-23 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D5220/D5220M-21 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM D4716/D4716M-14 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D2688-05 Standard Test Methods for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Methods)
ASTM D6855-17(2023) Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
ASTM D7007-03 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials
ASTM D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D5776-07 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
ASTM D558-03 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM HYDRO99-99 ASTM Standards on Determining Subsurface Hydraulic Properties & Ground-Water Modeling
ASTM F449-02 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM D5220-14 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM D558-11 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM F449-02e1 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM F449-02(2014) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM D7007-16 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials
ASTM D7937-15 Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water
ASTM D6698-24 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
ASTM D7007-15 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials
ASTM D6390-05 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
ASTM D6390-99 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
ASTM D6855-17 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
ASTM D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D558/D558M-19 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM D4739-11(2017) Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
ASTM D8126-17 Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
ASTM D6452-99 Standard Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations
ASTM D664-04 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D5855-95(2000) Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of a Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in a Flowing Well
ASTM D5254-92(2004) Standard Practice for Minimum Set of Data Elements to Identify a Ground-Water Site
ASTM D664-09a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-06ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-01 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

IN-BIS

IS 6935-1973 Methods of Determining Water Level in Boreholes

Association of German Mechanical Engineers

VDI/VDE 3519 BLATT 2-2012 Level measurement technology — visual method
VDI/VDE 3519 Blatt 2-2011 Fuellstandmesstechnik - Sichtverfahren

National Association of Corrosion Engineers (NACE)

NACE TM0173-1999 Methods for Determining Quality of Subsurface Injection Water Using Membrane Filters Item No:21205
NACE TM0173-2015 Standard Test Method for Determining Quality of Subsurface Injection Water Using Membrane Filters
NACE TM0173-2005 Standard Test Method - Methods for Determining Quality of Subsurface Injection Water Using Membrane Filters
NACE TM0399-1999 Standard Test Method for Phosphonate in Brine Item No. 21238
NACE SP0207-2007 Performing Close-Interval Potential Surveys and DC Surface Potential Gradient Surveys on Buried or Submerged Metallic Pipelines (Item No. 21121)

Japanese Industrial Standards Committee (JISC)

JIS G 1238:1992 Steel and iron -- Determination of chromium content -- Potentiometric or visual titration method
JIS K 0400-42-80:2000 Water quality -- Determination of ammonium -- Potentiometric method

Gosstandart of Russia

GOST 4.225-1983 Quality ratings system. Building. Ceramic sewage and drain pipes. Nomenclature of characteristics
GOST 2706.9-1974 Benzene hydrocarbons and allied products. Method of determination of water layer height in tank
GOST 17.1.1.04-1980 Nature protection. Hydrosphere. Underground waters classification according to water usage
GOST 26362-1984 Foot-gear. Method for determination of water resistance in dynamic conditions

German Institute for Standardization

DIN 40046-721-3 E:2004-11 Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 – Stationary use at weatherprotected locations
DIN 52009:2006 Test methods for aggregates - Determination of water absorption under pressure
DIN 52009:2006-02 Test methods for aggregates - Determination of water absorption under pressure
DIN 52009:2013-10 Test methods for aggregates - Determination of water absorption under pressure
DIN 52009:2013 Test methods for aggregates - Determination of water absorption under pressure
DIN 38404-15:1987-09 German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of beta activity per unit volume in drinking water, ground water, surface water and waste water (C 15)
DIN EN 24937:1992 Determination of chromium content of steel and iron by potentiometric or visual method (ISO 4937:1986); german version EN 24937:1990
DIN EN 14437 E:2002-05 Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods
DIN EN 12004-1 E:2015-02 Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods
DIN V ENV 12141:1996-12 Fruit and vegetable juices - Determination of the stable oxygen isotope ratio (O/O) of water from fruit juices - Method using isotope ratio mass spectrometry; German version ENV 12141:1996

Ente Nazionale Italiano di Unificazione

UNI EN ISO 9455-3:1996 Soft soldering fluxes. Test methods. Determination of acide value, potentiometric and visual titration methods.
UNI CEN ISO/TS 22475-2:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 2: Qualification criteria for enterprises and personnel
UNI EN 14962:2006 Water quality - Guidance on the scope and selection of fish sampling methods
UNI EN 24937:1992 Steel and iron. Determination of chromium content. Potentiometric or visual method.
UNI EN ISO 9455-3:2020 Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods

Indonesia Standards

SNI 13-4690-1998 Vertical type ground water level recording equipment (using buoys)
SNI 7749-2012 Tata cara penentuan tinggi muka air tanah pada lubang bor atau sumur pantau

Swedish Institute for Standards

ASTM D4377-11 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D2460-13 Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water

Spanish Association for Standardization (UNE)

UNE 178506:2022 Methodology for the search engine optimization (SEO) positioning of tourist destination websites.
UNE 80213:2010 Methods of cement testing. Potentiometric determination of chlorides
UNE 36324-2/1M:1992 STEEL AND IRON. DETERMINATION OF CHROMIUM CONTENT. POTENTIOMETRIC OR VISUAL METHOD.
UNE-EN ISO 9455-3:2020 Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:2019)
UNE 80213:1999 EX METHODS OF CEMENT TESTING. POTENTIOMETRIC DETERMINATION OF CHLORIDES.
UNE 34103:2022 Fruit and vegetable juices. Determination of the stable oxygen isotope ratio (18O/16O) of water from fruit juices. Method using isotope ratio mass spectrometry.
AENOR UNE 36324-2:1991 Steel and iron - Determination of chromium content - Potentiometric or visual method (ISO 4937:1986)

U.S. Military Regulations and Norms

ARMY MIL-T-70700 A (1)-1994 TARGET HOLDING MECHANISM ASSEMBLY: 9375764
ARMY MIL-T-70700 A-1992 TARGET HOLDING MECHANISM ASSEMBLY: 9375764
ARMY MIL-T-70700 A NOTICE 1-1998 TARGET HOLDING MECHANISM ASSEMBLY: 9375764
ARMY MIL-T-45508 B-1972 TARGET HOLDING MECHANISM, TRAINFIRE, M31A1
ARMY MIL-T-45508 B NOTICE 1-1996 TARGET HOLDING MECHANISM, TRAINFIRE, M31A1
ARMY MIL-T-45508 B (2)-1978 TARGET HOLDING MECHANISM, TRAINFIRE, M31A1

International Telecommunication Union (ITU)

ITU-R S.670-1-1992 Flexibility in the Positioning of Satellites as a Design Objective - Section 4D3 - Spacecraft Station-Keeping - Satellite Antenna Radiation Pattern - Pointing Accuracy
ITU-R S.670-1992 Flexibility in the positioning of satellites as a design objective

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 18632:2013 Alloyed steel -- Determination of manganese -- Potentiometric and visual titration method
OS GSO ISO 4937:2015 Steel and iron -- Determination of chromium content -- Potentiometric or visual titration method
OS GSO ISO 9455-3:2013 Soft soldering fluxes -- Test methods -- Part 3: Determination of acid value, potentiometric and visual titration methods
OS GSO ISO 6778:2015 Water quality -- Determination of ammonium -- Potentiometric method

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 18632:2016 Alloyed steel -- Determination of manganese -- Potentiometric and visual titration method
BH GSO ISO 6778:2016 Water quality -- Determination of ammonium -- Potentiometric method
BH GSO ASTM D4778:2015 Standard Test Method forDetermination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions

GOST

GOST R 71480-2024 Microwave ferrite devices. Methods of measurement of phase shift at a low power level

US-FCR

FCR COE RPMAS 61550-1977 VISUAL INSPECTION OF SEWER LINES
FCR COE EM 1110-2-1411-1965 STANDARD PROJECT FLOOD DETERMINATIONS

RO-ASRO

STAS SR EN 24937-1994 Steel and iron. Determination of chromium content. Potentiometric or visual titration method

SE-SIS

SIS SS-EN 24 937-1991 Steel and iron — Determination of chromi- um content — Potentiometric or visual titration method
SIS OVERSIKT SIS 10-1991 SIS FASTSTALLER OCH UTGER SVENSK STANDARD SAMT SAUER NATIONELLA OCH IN TE RN AT 10 N E LL A ST AN D ARDP U BLI K ATI ON ER

Danish Standards Foundation

DS/ISO 4937:1991 Steel and iron. Determination of chromium content. Potentiometric or visual titration method
DANSK DS/ISO 9455-3:2019 Soft soldering fluxes – Test methods – Part 3: Determination of acid value, potentiometric and visual titration methods
DANSK DS/EN 24937:1990 Steel and iron - Determination of chromium content - Potentiometric or visual titration method

Standard Association of Australia （SAA）

AS 1066:1973 Methods for the determination of resistance of fabrics to water: Waterrepellency and water penetration (Metric units)
AS A112:1971 Method for the determination of bleeding of concrete (imperial units)
AS 1580.481.6:1975 Methods of test for paints, varnishes, lacquers and related materials (metric units) - The determination of durability of marine underwater paint systems under cathodically protected conditions
AS K41.481.6:1969 Standard Methods of Test for Paints, Varnishes, Lacquers and Related Materials, Method 481.6: The determination of durability of marine underwater paint systems under cathodically protected conditions

Standards Norway

NS-EN ISO 9455-3:2020 Soft soldering fluxes — Test methods — Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:2019)

VN-TCVN

TCVN 6620-2000 Water quality.Determination of ammonium.Potentiometric method

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JEP155A-2012 Recommended ESD Target Levels for HBM/MM Qualification

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Conformity Assessment Program (ICAP)--IEEE Industry Roundtable Meeting--Interoperability And Cy IEEE Conformity Assessment Program (ICAP)—IEEE Industry Roundtable Meeting—Interoperability And Cybersecurity for IoT-Enabled Sensor Devices

PL-PKN

PN-EN ISO 9455-3-2020-11 E Soft soldering fluxes -- Test methods -- Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:2019)

CZ-CSN

CSN 01 1609-1986 Noise. Methods for the determination of the sound levels at the operator's position[s] in the manufacturer's conditions

Acoustical Society of America (ASA)

ASA S3.71-2019(R2023) American National Standard Methods for Measuring the Effect of Head-worn Devices on Directional Sound Localization in the Horizontal Plane

The American Road & Transportation Builders Association

AASHTO T 191-2014(R2018) Standard Method of Test for Density of Soil In-Place by the Sand-Cone Method

Others: Methods of Underwater Target Locating