Tooth Surface Hardness Tester

Tooth Surface Hardness Tester, Total:225 items.

The international standard classification for "Tooth Surface Hardness Tester" includes: Refrigerating technology , Gears , Mechanical testing , Milling tools , Watches , Plastics .

The Chinese standard classification for "Tooth Surface Hardness Tester" includes: Coupling, brake and speed variator , Metal material testing machine , Gear and gear drive , Cutting tools , Horology , Basic standards and general methods for synthetic resin and plastic , Mechanics Measurement .

Professional Standard - Machinery

JB/T 5487-1991 Specifications for tooth surface Rockwell hardness tester
JB/T 9378-2001 Leeb hardness testers
JB/T 6148-2017 Shore durometer
JB/T 14199-2022 Single side support hard tooth gearboxes for cranes
JB/T 10816-2007 Foot monunted hardened tooth flank gearboxes for cranes
JB/T 10817-2007 Three-point support hardened tooth flank gearboxes for cranes

Group Standards of the People's Republic of China

T/ZZB 2042-2021 Case-hardened reduction gear units

Professional Standard - Aviation

HB/Z 89.3-1985 Calculation of Bending Fatigue Strength of Aviation Bevel Gear Tooth
HB 1375-1981 Face gear indexing table
HB/Z 89.2-1985 Calculation of Contact Fatigue Strength of Aeronautical Bevel Gear Tooth Surface
HB 723-1992 Milling Cutter - Cutter Tooth Used for Tipped Sleeve Facing Type Cutter with Welding Cemented Carbide Blade for Machining Light Alloy
HB 2436-1992 Milling Cutter - Wedge for Toothed Double-edged and Three-edge Milling Cutter for Welding Cemented Carbide Blade
HB/Z 84.2-1984 Calculation of Contact Fatigue Strength of Aeronautical Involute Cylindrical Gears
HB 2435-1979 Teeth for milling cutters with inserts for welded carbide inserts on double and triple sides
HB 2435-1992 Milling Cutter- Cutter Tooth for Tipped Double-edged and Three-edge Milling Cutter with Welding Cemented Carbide Blade
HB 723-1979 Teeth for insert shell milling cutters for machining light alloy welded carbide inserts

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11365-1989 Accuracy of bevel and hypoid gears
GB/T 3480.2-2021 Calculation of load capacity of spur and helical gears—Part 2: Calculation of surface durability (pitting)
GB/T 2411-2008 Plastics and ebonite - Determination of indentation hardness by means of a duronmeter(shore hardness)
GB/Z 6413.2-2003 Calculation of scuffing load capacity of cylindrical,bevel and hypoid gears—Part 2:Integral temperature method
GB/T 22775-2008 Gears for timekeeping instruments—Contrate gears
GB/T 10062.2-2003 Calculation of load capacity for bevel gear-Part 2: Calculation of surface durability(pitting)
GB/T 9062-2006 Side and face milling cutters with double alternate helical teeth with carbide tips
GB/Z 3480.4-2024 Calculation of load capacity of spur and helical gears—Part 4: Calculation of tooth flank fracture load capacity
GB/T 9062-1988 Side and face milling cutters with double alternate helical teeth with carbide tips
GB/T 3480.3-2021 Calculation of load capacity of spur and helical gears—Part 3: Calculation of tooth bending strength

Professional Standard - Light Industry

QB/T 2092-1995 Gears for Timekeeping Instruments - Contrate Gears

National Metrological Verification Regulations of the People's Republic of China

JJG 450-2016 Fruits Hardness Testers
JJG 831-1993 Verification Regultion of Green Sand Mould Surface Hardness Tester for Castings
JJG 2068-1990 Measuring Instruments for Metallic Superficial Rockwell Hardness
JJG 149-1994 V.R. of Standard Superficial Rockwell Hardness Test Block

Taiwan Provincial Standard of the People's Republic of China

CNS 5985-1984 Calculation of Load Capacity on Tooth Flank for Bevel Gears
CNS 5983-1984 Calculation of Load Capacity on Tooth Flank for Cylindrical Gears
CNS 5283-1984 Accuracy of Cylindrical Gear Teeth Tolerance for Errors of Tooth Trace

Professional Standard - Building Materials

JC/T 878.5-2001 Case-hardened reducer for rolling press in the cement industry
JC/T 878.4-2001 Case-hardened vertical mill-reducer used in the cement industry
JC/T 878.3-2001 Case-hardened kiln use-reducer in the cement industry
JC/T 878.2-2001 Case-hardened side driving reducer used in the cement industry

Gosstandart of Russia

GOST 30224-1996 Novikov cilindrical gears with hardness of teeth surface not less 35 HRCe. Basic rack
GOST 24621-2015 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST 24621-1991 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)

American Gear Manufacturers Association

AGMA 24FTM08 Analytical Calculation of the Gear Body Stiffness of Face Gears
AGMA 91FTM17-1991 The Influence of Lubrication on the Onset of Surface Pitting in Machinable Hardness Gear Teeth
AGMA 23FTM11 Tooth Flank Fracture – Investigations on the Influence of Overloads on the Fatigue Strength of Case-Hardened Gears
AGMA 91FTM17 The Influence of Lubrication on the Onset of Surface Pitting in Machinable Hardness Gear Teeth
91FTM17-1991 The Influence of Lubrication on the Onset of Surface Pitting in Machinable Hardness Gear Teeth
13FTM09-2013 Investigations on Tooth Root Bending Strength of Case Hardened Gears in the Range of High Cycle Fatigue
2000FTM2-2000 Calculation of Optimum Surface Carbon Content for Carburized Case Hardened Gears
AGMA 13FTM09-2013 Investigations on Tooth Root Bending Strength of Case Hardened Gears in the Range of High Cycle Fatigue
91FTM15-1991 Gear Hardness Technology
AGMA 2000FTM2 Calculation of Optimum Surface Carbon Content for Carburized Case Hardened Gears
AGMA 91FTM15-1991 Gear Hardness Technology
AGMA 91FTM15 Gear Hardness Technology
AGMA 91FTM7 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
AGMA 2000FTM2-2000 Calculation of Optimum Surface Carbon Content for Carburized Case Hardened Gears
P84FTM6-1984 CBN Finish Grinding of Hardened Spiral Bevel and Hypoid Gears
05FTM05-2005 Computerized Design of Face Hobbed Hypoid Gears: Tooth Surfaces Generation@ Contact Analysis and Stress Calculation
AGMA 91FTM7-1991 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
AGMA 21FTM08 Defining The Tooth Flank Temperature in High Speed Gears
AGMA 91FTM12-1991 The Combined Mesh Stiffness Characteristics of Straight and Spiral Bevel Gears
AGMA 118.01 Information Sheet Gear Tooth Surface Texture for Aerospace Gearing (Surface Roughness, Waviness, Form and Lay)
AGMA 95FTM5-1995 Surface Fatigue Life of Contour Induction Hardened AISI 1552 Gears
118.01-1973 Information Sheet Gear Tooth Surface Texture for Aerospace Gearing (Surface Roughness@ Waviness@ Form and Lay)
AGMA 05FTM05-2005 Computerized Design of Face Hobbed Hypoid Gears: Tooth Surfaces Generation, Contact Analysis and Stress Calculation
AGMA 203.03-73 Fine-Pitch On-Center Face Gears for 20-Degree Involute Spur Pinions
AGMA 929-B22 Calculation of Bevel Gear Top Land, Slot Widths and Cutter Edge Radii
P149.03-1983 Prediction of the Peak Temperature on the Surface of Thermoplastic Gear Teeth
P229.29-1983 Evaluation of Endurance Limit for Contact Stress in Gears with Particular Reference to Surface Hardened Gears
929-A06-2006 Calculation of Bevel Gear Top Land and Guidance on Cutter Edge Radius
AGMA 09FTM01-2009 Influence of the Residual Stresses Induced by Hard Finishing Processes on the Running Behavior of Gears
AGMA 05FTM08-2005 New Developments in Tooth Contact Analysis (TCA) and Loaded TCA for Spiral Bevel and Hypoid Gear Drives
203.03-73-1973 Fine-Pitch On-Center Face Gears for 20-Degree Involute Spur Pinions
AGMA 93FTM7 New Developments in Design, Manufacturing and Applications of Cylkro-(Face) Gears
93FTM5-1993 Optimal Gear Design for Equal Strength Teeth Using Addendum Modification Coefficients

European Committee for Standardization (CEN)

prEN 667-1992 Rubber floor coverings; determination of indentation hardness by means of a durometer (Shore A hardness)
EN ISO 868:1997 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) ISO 868: 1985

American Society for Testing and Materials (ASTM)

ASTM E140-97e2 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-12B(2019)e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM RR-D01-1160 2011 D7735-Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
ASTM D7735-17 Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
ASTM D7735-17(2022) Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
ASTM RR-E28-1005 1985 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM RR-E28-1044 2012 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-05e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-97e3 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-07 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM F1957-99 Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM E140-12be1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM RR-E28-1003 1984 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-12b Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM F1957-24 Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM F1957-99(2017) Standard Test Method for Composite Foam Hardness-Durometer Hardness
ASTM E140-02e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM RR-E28-1001 1982 E0140-Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
ASTM E140-05 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
ASTM E140-02 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness

British Standards Institution (BSI)

BS ISO 10300-2:2014 Calculation of load capacity of bevel gears. Calculation of surface durability (pitting)
BS ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Shore-type durometer method
BS ISO 7267-2:2009 Rubber-covered rollers. Determination of apparent hardness. Shore-type durometer method
BS ISO 10300-2:2001 Calculation of load capacity of bevel gears-Calculation of surface durability (pitting)
BS ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears-Integral temperature method
BS ISO/TR 13989-1:2001 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Flash temperature method
BS ISO 10300-3:2001 Calculation of load capacity of bevel gears-Calculation of tooth root strength
BS ISO 6336-3:2019 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength
BS ISO 10300-3:2014 Calculation of load capacity of bevel gears. Calculation of tooth root strength
BS ISO 10300-3:2023 Calculation of load capacity of bevel gears - Calculation of tooth root strength
PD ISO/TS 6336-4:2019 Calculation of load capacity of spur and helical gears. Calculation of tooth flank fracture load capacity
BS PD ISO/TS 6336-4:2019 Calculation of load capacity of spur and helical gears-Calculation of tooth flank fracture load capacity
BS ISO/TR 13989-2:2001 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Integral temperature method
BS PD ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears-Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Integral temperature method
BS EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
BS ISO 6336-3:2006 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength - Corrigendum 1
BS EN ISO 868:1998 Plastics and ebonite. Determination of indentation hardness by means of a a durometer (Shore hardness)
BS ISO 6336-3:1996 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength
BS ISO 6336-3:1997 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength
BS PD ISO/TR 10300-30:2024 Calculation of load capacity of bevel gears - ISO rating system for bevel and hypoid gears. Sample calculations
BS ISO 6336-3:2019(2020) Calculation of load capacity of spur and helical gears Part 3 : Calculation of tooth bending strength

Czech Standards Institute (UNMZ)

CSN 01 4686 Cast.3-1988 Calculation of control strength of front and bevel gears
CSN 99 4442-1989 Indenters for hardness testing machines Methods of verification
CSN 62 1431-1993 Rubber, plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
CSN 72 5126-1987 Determination of scratch hardness of surface accordíng to Mohs

International Organization for Standardization (ISO)

ISO 6336-2:1996 Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pittings)
ISO 6336-2:2006 Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting)
ISO 10300-2:2001 Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (pitting)
ISO 10300-2:2014 Calculation of load capacity of bevel gears - Part 2: Calculation of surface durability (pitting)
ISO 6336-2:1996/Cor 2:1999 Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pittings); Technical Corrigendum 2
ISO 6336-2:1996/Cor 1:1998 Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting); Technical Corrigendum 1
ISO 6336-2:2006/Cor 1:2007 Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting)
ISO 7267-2:1986 Rubber-covered rollers; Determination of apparent hardness; Part 2 : Shore-type durometer method
ISO 7267-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2: Shore-type durometer method
ISO 2783:1975 Ebonite — Determination of hardness by means of a durometer
ISO 868:1978 Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears - Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Integral temperature method
ISO 10300-3:2011 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
ISO 10300-3:2023 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
ISO/TS 6336-20:2017 Calculation of load capacity of spur and helical gears - Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Flash temperature method
ISO/FDIS 10300-3 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 868:1985 Plastics and ebonite; Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 6336-3:2019 Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength

Ente Nazionale Italiano di Unificazione

UNI EN 15771:2010 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
UNI EN ISO 6769:2023 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
UNI ISO/TS 6336-21:2020 Calculation of load capacity of spur and helical gears - Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) -- Integral temperature method
UNI ISO 10300-3:2024 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
UNI ISO/TS 6336-4:2020 Calculation of load capacity of spur and helical gears - Part 4: Calculation of tooth flank fracture load capacity
UNI ISO 6336-3:2020 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
EC 1-2020 UNI ISO 6336-3:2020 Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength

Association Francaise de Normalisation

NF A91-161*NF EN ISO 6769:2022 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale
NF T47-404-2:2008 Rubber-covered rollers - Determination of apparent hardness - Part 2 : Shore-type durometer method.
NF EN ISO 868:2003 Plastics and ebonite - Determination of penetration hardness using a durometer (Shore hardness)
XP E23-030-21*XP ISO/TS 6336-21:2018 Calculation of load capacity of spur and helical gears - Part 21 : calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Integral temperature method
NF T51-174:1998 Plastics and ebonite. Determination of identation hardness by means of a durometer (Shore hardness).
NF EN ISO 6769:2022 Vitrified enamels - Determination of surface hardness according to the Mohs scale
NF T51-174*NF EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
NF E23-030-3*NF ISO 6336-3:2020 Calculation of load capacity of spur and helical gears - Part 3 : calculation of tooth bending strength

Danish Standards Foundation

DANSK DS/ISO 6769:2022 Vitreous and porcelain enamels – Determination of surface scratch hardness according to the Mohs scale
DANSK DS/EN ISO 6769:2022 Vitreous and porcelain enamels – Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
DANSK DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DANSK DS/ISO/TS 6336-21:2017 Calculation of load capacity of spur and helical gears – Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) – Integral temperature method
DANSK DS/ISO/TS 6336-20:2017 Calculation of load capacity of spur and helical gears -- Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) – Flash temperature method
DANSK DS/ISO 6336-3:2019 Calculation of load capacity of spur and helical gears – Part 3: Calculation of tooth bending strength

Finnish Standards Institute

SFS 4790-1986 gear. Strength calculation of circular gears
SFS-ISO 868 E:1986 This standard is approved in English

Association of German Mechanical Engineers

VDI VDE 2612 Blatt 5-2015 Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments
VDI 2142 Blatt 2-2007 Construction of planar cam mechanisms - Calculation modules for cam and crank mechanisms
VDI 2142 BLATT 3-2014 Design of flat cam gears — practical examples

GM Holden Ltd

HOLDEN HN 0163-1978 Determination of Indentation Hardness Durometer
HOLDEN HN 0163-2013 Determination of Indentation Hardness Durometer

Korean Agency for Technology and Standards (KATS)

KS M ISO 7267-2:2010 Rubber-covered rollers － Determination of apparent hardness － Part 2: Shore-type durometer method
KS B ISO 10300-2-2024 Calculation of load capacity of bevel gears -Part 2 : Calculation of surface durability(pitting)
KS M ISO 868-2021 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 868-2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 868-2016(2021) Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS B ISO 10300-3-2024 Calculation of load capacity of bevel gears － Part 3: Calculation of tooth root strength
KS M 7077-2006 BOARD-DETERMINATION OF STIFFNESS BY TABER STIFFNESS TESTER
KS B ISO 10250-2003(2023) Knoop hardness calculation table for flat testing of metallic materials
KS B ISO 10300-3-2009(2019) Calculation of load capacity of bevel gears－Part 3：Calculation of tooth root strength
KS M ISO 868:2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS M ISO 868:2011 Plastics and ebonite-Determination of indentation hardness by means of a durometer(Shore hardness)
KS B ISO 10300-3-2009(2024) Calculation of load capacity of bevel gears － Part 3: Calculation of tooth root strength
KS B ISO 10300-3-2019 Calculation of load capacity of bevel gears － Part 3: Calculation of tooth root strength
KS B ISO 6336-2:2007 Calculation of load capacity of spur and helical gears-Part 2:Calculation of surface durability(pitting)
KS B ISO 6336-3-2020 Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
KS B ISO 6336-3-2015(2020) Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
KS B ISO 6336-2:2015 Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability(pitting)

Belgian Standards Institute

NBN 748-21-1971 Surface hardness measurement. Hardness index
NBN B 15-225-1984 Concrete testing, surface hardness measurement, hardness index

Standards Norway

NS-EN ISO 6769:2022 Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022)
NS 9507:1985 Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
NS-EN ISO 868:1997 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:1985)
NS-EN ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)

German Institute for Standardization

DIN 3990-3:1987-12 Calculation of load capacity of cylindrical gears; calculation of tooth strength
DIN 3990-3:1987 Calculation of load capacity of cylindrical gears; calculation of tooth strength
DIN 3969-1:1991-10 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 3969-1:1991 Surface roughness of tooth flanks; roughness parameters, surface grades
DIN 3991-3:1988-09 Calculation of load capacity of bevel gears without pinion offset; calculation of tooth strength
DIN EN ISO 868:2003-10 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
DIN 3991-3:2024-06 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
DIN 3991-3:2024 Calculation of load capacity of bevel gears - Part 3: Calculation of tooth root strength
DIN EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003

Türk Standardları Enstitüsü

TS 2611-1977 EBON?TE - DETERMINATION OF HARDNESS BY MEANS OF A DUROMETER

Swedish Institute for Standards

SS 168405:1982 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
SS-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 8668:2003)

Japanese Industrial Standards Committee (JISC)

JSA JIS B 1759-2019 Estimation of tooth bending strength of cylindrical plastic gears
JIS K 7215:1986 Testing methods for durometer hardness of plastics

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)

Yugoslav Association for Standardization

JUS G.S2.525-1984 Plastics. Determination of indentation hardness by means of a durometer (Shore hardness)

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 868:2016 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
BH GSO ISO 10300-3:2022 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
BH GSO ISO 6336-3:2016 Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength

GCC Standardization Organization

BH GSO ISO 10300-3:2024 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
GSO ISO 10300-3:2021 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
GSO ISO 10300-3:2024 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
GSO ISO 868:2015 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
OS GSO ISO 10300-3:2024 Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
BH GSO OIML R36:2024 Verification of indenters for hardness testing machines Systems: Brinell – Rockwell B, F, and T Vickers – Rockwell C, A, and N

National Standardisation Body (ASRO)

STAS SR ISO 868:1995 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 4502-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer (Shore hardness)
TCVN 7578-3-2006 Calculation of load capacity of spur and helical gears.Part 3: Calculation of tooth bending strength

Thai Industrial Standards Institute (TISI)

TIS 2245-2005 Plastics and ebonite.determination of indentation hardness by means of a durometer (shore hardness)

Bureau of Indian Standards

IS 7096-1981 Hardness test method for metal materials hardness tester
IS 7172-1984 Calibration method of hardness tester

Magyar Szabványügyi Testület

MSZ KGST 2003-1979 Hardness measurement of powder metallurgy hard metal Rockwell hardness tester

Austrian Standards

ONORM M 6745-3-1994 Calculation of load capacity of bevel gears without offset - Tooth strength

Others: Inserted side and side milling cutter,Carbide Inserted Face Mills,Carbide Tooth Face Milling Cutter,Inserted shell face milling cutter,High-speed steel insert type three-sided blade,iso+ tooth surface,Insert type side and side milling cutter,Tooth Surface Hardness Tester,Portable Tooth Surface Hardness,Tooth Surface Hardness Tester,Tooth flange