initial body temperature

initial body temperature, Total:119 items.

The international standard classification for "initial body temperature" includes: Aerospace engines and propulsion systems , Protection against dangerous goods , Computer graphics , Interface and interconnection equipment , Switching and signalling systems .

The Chinese standard classification for "initial body temperature" includes: Spacecraft power system , Marking, packaging, transport and storage in general , Computer application , System equipment interface , Communication network number, signal and connection , Communication network technical system , Telecommunication services .

Professional Standard - Aerospace

QJ 1812-1989 Method for Determination of Initial Tensile Modulus of Composite Solid Propellants
QJ 1468-1988 Test Methods for Initial Thermal Decomposition Temperature and Off Temperature of Composite Solid Propellant

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14213-1993 Initial graphics exchange specification
GB/T 28969-2012 Electronic toll collection—On board unit initialize equipment
GB/T 22052-2008 Test method for vapor pressure - Temperature relationship and initial decompostition temperature of liquids by isoteniscope
GB/T 14213-2008 The initial graphics exchange specification（IGES）

Professional Standard - Post and Telecommunication

YD/T 1522.3-2006 Technical Requirements for Session Initiation Protocol Part 3:Interworking between ISUP and SIP
YD/T 1522.2-2006 Technical Requirements for Session Initiation Protocol Part 2:Applications about call control based on SIP
YD/T 1522.1-2006 Technical Requirements for Session Initiation Protocol Part 1:Basic Session Initiation Protocol
YD/T 1938.1-2009 Test method for Session Initiation Protocol (SIP) Part 1：Basic Session Initiation Protocol

Group Standards of the People's Republic of China

T/CNS 60-2022 Reactor first loading and initial criticality test in high temperature gas cooled reactor nuclear power plants

未注明发布机构

CSA C900.5-2021 Thermal energy meters — Part 5: Initial verification tests
DIN EN 1434-5:2003 Thermal energy measuring devices – Part 5: Initial verifications

Military Standard of the People's Republic of China-General Armament Department

GJB 5238-2004 Equipment initial training and training support requirements

American Society for Testing and Materials (ASTM)

ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-23 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-10 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D5539-94(2003) Standard Specification for Seed Starter Mix
ASTM D5539-94(1998) Standard Specification for Seed Starter Mix
ASTM D5539-94(2008) Standard Specification for Seed Starter Mix
ASTM D5539-13 Standard Specification for Seed Starter Mix
ASTM D5539-14 Standard Specification for Seed Starter Mix
ASTM D5539-94(2013) Standard Specification for Seed Starter Mix

WRC - Welding Research Council

BULLETIN 443-1999 EXTERNAL PRESSURE: EFFECT OF INITIAL IMPERFECTIONS AND TEMPERATURE LIMITS

RU-GOST R

GOST R 57291-2016 Masonry. Method of determination of initial shear strength
GOST R 57289-2016 Masonry. Method of determination of initial shear strength
GOST 26239.0-1984 Semiconductor silicon, raw materials for its production and quartz. General requirements for methods of analysis
GOST 26239.3-1984 Semiconductor selicon, raw materials for its production and quartz. Methods of phosphorus determination
GOST 22988.1-1978 Gas caunters. Method of threshold voltage measurement
GOST 26239.2-1984 Semiconductor selicon, raw materials for its production and quartz. Methods of boron determination
GOST 26517-1985 Irom ores, agglomerates and pellets. Method for determination of initial softening point and temperature range of softening
GOST 26239.1-1984 Semiconductor silicon, raw materials for its production and quartz. Method of impurities determination
GOST 12806-1977 Marine steam turbine plants. Initial steam conditions
GOST R EN 1434-5-2006 Heat meters. Part 5. Initial verification tests
GOST 29268-1991 Seed potatoes. Normalized initial material. Specifications
GOST R EN 1434-5-2011 Heat meters. Part 5. Initial verification tests

American Welding Society (AWS)

WRC 443:1999 External Pressure: Effect Of Initial Imperfections And Temperature Limits

Standard Association of Australia （SAA）

HB 206-2004 Initial Environmental Review (IER)
HB 76-2004 Dangerous goods - Initial emergency response guide

Association Francaise de Normalisation

NF EN 62740:2015 Initial cause analysis (RCA)
NF EN 1052-3/A1:2007 Masonry testing methods - Part 3: determination of initial shear strength
NF EN 1052-3:2003 Masonry testing methods - Part 3: determination of initial shear strength
NF E17-401-5:2007 Heat meters - Part 5 : initial verification tests.
NF E17-401-5/IN1*NF EN 1434-5/IN1:2019 Thermal energy meters - Part 5 : initial verification tests
NF EN 1434-5:2022 Thermal energy meters - Part 5: initial verification tests
NF E17-401-5*NF EN 1434-5+A1:2019 Thermal energy meters - Part 5 : initial verification tests
NF B35-601*NF ISO 22916:2022 Microfluidic devices - Interoperability requirements for dimensions, connections and initial device classification

ZA-SANS

SANS 6085:2006 Concrete tests - Initial drying shrinkage and wetting expansion of concrete

CZ-CSN

CSN 77 0863-1987 Determination of the initial adhesive force
CSN 25 0003-1986 Initial verification of measuring instruments. General requirements

IETF - Internet Engineering Task Force

RFC 3390-2002 Increasing TCP’s Initial Window

SAE - SAE International

SAE J1881-2001 Initial Graphics Exchange Specification@ Recommended Practice
SAE J1881-1988 Initial Graphics Exchange Specification@ Recommended Practice

US-FCR

FCR COE ETL 1110-2-231-1979 INITIAL RESERVOIR FILLING PLAN

Society of Automotive Engineers (SAE)

SAE J1881-1993 INITIAL GRAPHICS EXCHANGE SPECIFICATION
SAE J1985-2023 Fuel Filter - Initial Single-Pass Efficiency Test Method

International Truck and Engine Corporation (ITEC)

INTERN CEMS GT-6B-2009 Initial Gloss of Paint

British Standards Institution (BSI)

BS EN 1434-5:2007 Heat meters - Initial verification tests
BS EN 1434-5:2015+A1:2019 Thermal energy meters. Initial verification tests
BS EN 1052-3:2002(2007) Methods of test for masonry — Part 3 : Determination of initial shear strength
BS EN ISO 22916:2022(2023) Microfluidic devices — Interoperability requirements for dimensions, connections and initial device classification

SCC

VDI 4085 BLATT 2-2015 Scrap yards — report on the initial state
BS EN 1434-5:2015 Heat meters-Initial verification tests
NS-EN 1052-3:2002 Methods of test for masonry — Part 3: Determination of initial shear strength
DANSK DS/EN 1052-3:2002 Methods of test for masonry - Part 3: Determination of initial shear strength
DANSK DS/EN 1052-3/A1:2002 Methods of test for masonry - Part 3: Determination of initial shear strength
NS-EN 1052-3:2002+A1:2007 Methods of test for masonry — Part 3: Determination of initial shear strength
HB 76-1997 Dangerous goods - Initial emergency response guide
SAA/SNZ HB76:1997 Dangerous goods - Initial emergency response guide
HB 76-1996 Dangerous goods - Initial emergency response guide
SAA/SNZ HB76:1996 Dangerous goods - Initial emergency response guide
AWWA IMTECH51425 UCA(TM): From Inception to International Standard
DANSK DS/EN 1434-5:2015 Heat meters – Part 5: Initial verification tests
NS-EN 1434-5:2007 Heat meters - Part 5: Initial verification tests
NS-EN 1434-5:2015 Heat meters - Part 5: Initial verification tests
NS-EN 1434-5:1997 Heat meters — Part 5: Initial verification tests
UNE-EN 1434-5:1997 HEAT METERS. PART 5: INITIAL VERIFICATION TEST.
AENOR UNE-EN 1434-5:2016 Heat meters - Part 5: Initial verification tests
CSA C900.5-2006(R2011) Heat Meters - Part 5: Initial Verification Tests
NS-EN 1434-5:2015+A1:2019 Thermal energy meters - Part 5: Initial verification tests
DANSK DS/EN 1434-5+A1:2019 Thermal energy meters – Part 5: Initial verification tests
UNE-EN 1434-5:2007 Heat meters - Part 5: Initial verification tests
NS-EN 1434-5:2022 Thermal energy meters - Part 5: Initial verification tests
AWWA DPOC56511 A Regulatory Overview of the Initial Distribution System Evaluation (IDSE)

International Federation of Trucks and Engines

NAVISTAR CEMS GT-6B-2015 VOID - Initial Gloss of Paint

Aeronautical Radio Inc.

ARINC 628P1-3 ITEM 14.0 System Initialization/Power Interrupts

(U.S.) Ford Automotive Standards

FORD SS-M4C9103-A-2009 DIESEL FUEL - LOW TEMPERATURE - INITIAL FILL INHIBITED ***TO BE USED WITH FORD WSS-M99P1111-A***

KR-KS

KS X 6902-1999(2022) Initial graphics exchange specification, version 5.2

Korean Agency for Technology and Standards (KATS)

KS X 6902-1999 Initial graphics exchange specification, version 5.2
KS X 6902-1999(2017) Initial graphics exchange specification, version 5.2
KS X 6902-2022 Initial graphics exchange specification, version 5.2
KS X 2207-1989 Guideline for Software Documentation for the Initiation Phase

Lithuanian Standards Office

LST EN 1052-3-2003 Methods of test for masonry - Part 3: Determination of initial shear strength
LST EN 1052-3-2003/A1-2007 Methods of test for masonry - Part 3: Determination of initial shear strength
LST EN 1434-5-2007 Heat meters - Part 5: Initial verification tests

Danish Standards Foundation

DS/EN 1052-3/A1:2007 Methods of test for masonry - Part 3: Determination of initial shear strength
DS/EN 1052-3:2002 Methods of test for masonry - Part 3: Determination of initial shear strength
DS/EN 1434-5:2007 Heat meters - Part 5: Initial verification tests

German Institute for Standardization

DIN EN 1052-3:2007-06 Methods of test for masonry - Part 3: Determination of initial shear strength; German version EN 1052-3:2002 + A1:2007
DIN EN 1434-5:2007 Heat meters - Part 5: Initial verification tests English version of DIN EN 1434-5:2007-05
DIN EN 1434-5:2023 Thermal energy meters - Part 5: Initial verification tests
DIN EN ISO 22916:2023-02 Microfluidic devices - Interoperability requirements for dimensions, connections and initial device classification (ISO 22916:2022); German version EN ISO 22916:2022

AENOR

UNE-EN 1052-3:2003/A1:2008 Methods of test for masonry - Part 3: Determination of initial shear strength
UNE-EN 1052-3:2003 Methods of test for masonry - Part 3: Determination of initial shear strength.

CO-ICONTEC

ICONTEC 1777-1982 Technical drawings, representation of initial sections

AT-ON

OENORM EN 1434-5-2020 Thermal energy meters - Part 5: Initial verification tests

European Committee for Standardization (CEN)

EN 1434-5:2007 Heat meters - Part 5: Initial verification tests
prEN 1434-5-2020 Thermal energy meters - Part 5: Initial verification tests
EN 1434-5:2015 Heat meters - Part 5: Initial verification tests

ES-UNE

UNE-EN 1434-5:2023 Thermal energy meters - Part 5: Initial verification tests

Japanese Industrial Standards Committee (JISC)

JIS K 3831:1990 Testing methods for initial flow rate of membrance filters

CEN - European Committee for Standardization

EN 1434-5:1997 Heat meters - Part 5: Initial verification tests (Incorporates Amendment A1: 2002)

Defense Logistics Agency

DLA DSCC-DWG-88013 REV F-2005 DELAY LINES, PASSIVE, 3-PIN, SIP

ES-AENOR

UNE 74-151-1992 Acoustics. Pure tone air conduction threshold audiometry for hearing conservation purposes

BR-ABNT

ABNT EB-23-1951 Initial resistance Portland cement. Brazilian specifications

GSO

BH GSO IWA 23:2022 Interoperability of microfluidic devices — Guidelines for pitch spacing dimensions and initial device classification
GSO IWA 23:2021 Interoperability of microfluidic devices — Guidelines for pitch spacing dimensions and initial device classification