aes series products

aes series products, Total:463 items.

The international standard classification for "aes series products" includes: Integrated circuits. Microelectronics , On-board equipment and instruments , Fasteners in general , Capacitors , Cosmetics. Toiletries .

The Chinese standard classification for "aes series products" includes: Bus , Semiconductor integrated circuit , Material and component for instrument and meter , Lightning arrester , Spacecraft control and guidance system , Fasteners , Microwave and millimeter wave diode and triode , Cosmetics .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3435-1987 Series and products for semiconductor CMOS integrated circuits--Products of families 4000
GB/T 12427-1990 Series and spectrum of buses

Group Standards of the People's Republic of China

T/YQMTYX 043-2023 Specification for E-commerce Live Broadcast Training Content of Lentinus edodes and Its Series Products
T/GZSX 055.2-2019 Prickly pear series products Prickly pear powder (solid drink)
T/YQMTYX 045-2023 Green management specification for e-commerce packaging of Lentinus edodes and its series products
T/GZSX 086-2022 Zunyi pepper series products Fried pepper sauce
T/GZSX 055.10-2019 Prickly pear series productsPrickly pear fruit canned
T/CPCIF 0042-2020 Shield seal grease series products and test methods
T/LZLSF 0010.2-2022 Liuzhou snail noodle series product part 2: snail stew
T/GZSX 055.8-2019 Prickly pear series products Prickly pear wine (compounded wine)
T/GZSX 089-2022 Zunyi pepper series products ??Chili powder
T/GZSX 087-2022 Zunyi pepper series products Pickled pepper
T/JSAS 018-2021 Instant dried squid and cuttlefish series products
T/GZSX 055.7-2019 Prickly pear series products Prickly pear wine (fermented wine)
T/GZSX 055.1-2019 Prickly pear series products Prickly pear concentrated juice
T/GZSX 088-2022 Zunyi pepper series products? Dried pepper
T/GZSX 055.9-2019 Prickly pear series products Preserved prickly pear
T/GZSX 055.11-2019 Prickly pear series products Prickly pear juice drink
T/GZSX 055.5-2019 Prickly pear series products Prickly pear fruit tea drink
T/GZSX 055.3-2019 Prickly pear series products Prickly pear tablet candy
T/GZSX 055.4-2019 Prickly pear series products Prickly pear coffee (solid beverage)
T/LZLSF 0010.3-2022 Liuzhou snail powder series products part 3: snail sauce
T/GZSX 055.6-2019 Prickly pear series products Prickly pear fruit beer
T/YQMTYX 041-2023 Lentinus edodes and its series of products live e-commerce after-sales service specifications

Professional Standard - Machinery

JB/T 53574-1999 Product quality classification of KQ series down-the-hole drilling rigs
JB/T 53575-1999 Product quality classification of KY series roller cone drilling rigs
JB/T 7492-1994 Permanent Magnet Material Product Series Spectrum
JB/T 6474-1992 Product Series Spectrum of Small and Medium Axial-flow Francis Turbine
JB/T 8847-1999 Classification of lifting and transportation machinery product categories and main parameter series
JB/Z 200-1989 Serial Model Pedigree of Valve Type Surge Arrester Products
JB/T 53530-1999 ST/SD series shuttle mine car product quality classification
JB/Z 327-1988 Serial model pedigree of valve type insulator products
JB/T 54829-1999 Product quality classification of slot series combined fixture components
JB/T 9693-1999 Series of power capacitor products

Professional Standard - Aerospace

QJ 1851-1990 液体发动机
QJ 929-1985 Series and Type Spectrum for Accelerometer Product
QJ 2998-1997 Series Spectrum of Self Locking Fastener for Space Product

未注明发布机构

DIN EN ISO 7090:2000 Flat discs with chamfer – Normal series – Product class A
DIN EN 9117 E:2017-07 Aerospace series - Delegated Product Release Verification
DIN EN 9138 E:2018-12 Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements
DIN EN ISO 7090:2000 Flat discs with chamfer – Normal series – Product class A
DIN EN 16602-10 E:2016-07 Space product assurance - Product assurance management
ISO 7093-1:2000/Amd 1:2001 Plain washers — Large series — Part 1: Product grade A
DIN EN 4840-002 E:2022-08 Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 40774-2021 Technical specification for eco-design product assessment—Office equipment

Sichuan Provincial Standard of the People's Republic of China

DB5105/T 37-2020 Geographical indication product Langjiu series products (sauce-flavor type) (Lang brand) production technical specifications
DB5105/T 36-2020 Technical Specifications for the Production of Geographical Indication Products Luzhou Laojiao Series Quyao (Jiuxiang Brand)
DB5106/T 14-2021 High-yield Cultivation Technical Specifications for Mid-early Maturity Dejaponica Varieties

Guizhou Provincial Standard of the People's Republic of China

DB52/T 987-2015 Geographical Indication Products Congjiang Fragrant Pig and Its Series of Meat Products

Fujian Provincial Food Standard of the People's Republic of China

DBS35/ 001-2017 Food Safety Local Standard Liancheng Dried Sweet Potato Series Products

Hebei Provincial Standard of the People's Republic of China

DB13/T 2116-2014 Jintian Grape Variety Production Technical Regulations

Chongqing Provincial Standard of the People's Republic of China

DB50/T 916-2019 High-yielding Cultivation Technical Regulations for Yumai Series Varieties

Professional Standard - Electron

SJ/T 11401-2009 Series program for semiconductor light emitting diodes
SJ 20757-1999 Series and products of microwave circuits-Products of microwave switchs series

Zhejiang Provincial Standard of the People's Republic of China

DB3308/T 055-2019 Technical regulations for the production of "round gourd" series of zucchini

Professional Standard - Traffic

JT/T 375.1-1998 Marine lubricant series.Part 1:Marine cylinder oils
JT/T 375.3-1998 Marine lubricant series.Part 3:Marine system oils

Guangdong Provincial Standard of the People's Republic of China

DB44/T 210-2004 The technology rules of seed producing in BaiSha radish series varieties

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3997-2021 Production Technical Regulations for Early Maturity and Late Japonica Rice Varieties of Zhenwao Series

Professional Standard - Commodity Inspection

SN/T 1478-2004 Determination of titanium dioxide in cosmetics -- ICP-AES

海关总署

HS/T 52-2016 X-ray fluorescence quantitative analysis method for magnesium oxide series mineral products

Korean Agency for Technology and Standards (KATS)

KS M 1062-2005 Determination of lead(Pb) and cadmium(Cd) in electronics byICP－AES/MS and AAS
KS M 1062-2007 Determination of lead(Pb) and cadmium(Cd) in electronics byICP－AES/MS and AAS
KS B ISO 7091-2020 Plain washers－Normal series－Product grade C
KS B ISO 7089-2020 Plain washers－Normal series－Product grade A
KS B ISO 7089-2005(2020) Plain washers－Normal series－Product grade A
KS B ISO 7091-2005(2020) Plain washers－Normal series－Product grade C
KS B ISO 7091:2005 Plain washers－Normal series－Product grade C
KS B ISO 7089:2005 Plain washers－Normal series－Product grade A
KS B ISO 10673-2020 Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A
KS B ISO 15071-2022 Hexagon bolts with flange－Small series－Product grade A
KS B ISO 7090-2005(2020) Plain washers, chamfered－Normal series－Product grade A
KS M 1065-2007 Determination of mercury in polymer material, metallic material andelectronics by CV－AAS, AFS and ICP－AES/MS
KS B ISO 1119-2014(2019) Geometrical product specifications(GPS) — Series of conical tapers and taper angles
KS B ISO 7090:2005 Plain washers, chamfered－Normal series－Product grade A
KS M 1065-2005 Determination of mercury in polymer material, metallic material andelectronics by CV－AAS, AFS and ICP－AES/MS
KS B ISO 1119-2019 Geometrical product specifications(GPS) — Series of conical tapers and taper angles
KS B ISO 1119:2004 Geometrical Product Specifications(GPS)-Series of conical tapers and taper angles
KS B ISO 1119:2014 Geometrical product specifications(GPS) — Series of conical tapers and taper angles
KS B ISO 2538-2016 Geometrical Product Specifications(GPS) — Series of angles and slopes on prisms

HU-MSZT

MSZ 5750-1979 Crane single series products
MSZ 2801-1982 Small railway single series products
MSZ KGST 772-1977 Quality 1 series product core
MNOSZ 16168-1954 Standard printed matter product series 1
MSZ 5244/1-1979 Bath tray drain series products, metal bath tray drain system
MSZ KGST 310-1976 Module series product equipment. for rotary machining
MSZ 10402-1967 Comprehensive industry. Chemical industry products. Measuring series equipment

SCC

DIN EN 1094-9 E:2005 Draft Document - Insulating refractory products - Part 9: Methods of test for alkaline earth silicate (AES) wool products; German version prEN 1094-9:2005
05/30124595 DC EN 1094-8. Insulating refractory products. Part 8. Terminology for alkaline earth silicate (AES) wool products
DIN EN 1094-8 E:2005 Draft Document - Insulating refractory products - Part 8: Terminology for alkaline earth silicate (AES) wools; German version prEN 1094-8:2005
DANSK DS/EN ISO 7092:2000 Plain washers - Small series - Product grade A
05/30124598 DC EN 1094-9. Insulating refractory products. Part 9. Methods of test for alkaline earth silicate (AES) wool products
NS-ISO 7091:1983 Plain washers — Normal series — Product grade C
DANSK DS/EN ISO 7094:2000 Plain washers - Extra large series - Product grade C
DANSK DS/EN ISO 7089:2000 Plain washers - Normal series - Product grade A
DANSK DS/EN ISO 7091:2000 Plain washers - Normal series - Product grade C
NS-ISO 7093:1983 Plain washers — Large series — Product grades A and C
ASD-STAN PREN 9117:2016 Aerospace series Delegated Product Release Verification
NS-EN 2424:1995 Aereospace series — Marking of aerospace products
AENOR UNE-EN ISO 7089:2000 Flat washers. Normal series. Class A product. (ISO 7089:2000).
DANSK DS/EN 2424:2008 Aerospace series - Marking of aerospace products
NS-EN ISO 7092:2000 Plain washers — Small series — Product grade A (ISO 7092:2000)
DANSK DS/EN ISO 7090:2000 Plain washers, chamfered - Normal series - Product grade A
DANSK DS/EN 9117:2017 Aerospace series – Delegated Product Release Verification
ASD-STAN PREN 2424:2006 Aerospace Series Marking of Aerospace Products
NS-EN 9117:2017 Aerospace series — Delegated Product Release Verification
NS-EN 2424:2008 Aerospace series — Marking of aerospace products
AENOR UNE-EN ISO 7092:2000 Plain washers. Small series. Product grade A. (ISO 7092:2000).
DANSK DS/EN ISO 7093-1:2000 Plain washers - Large series - Part 1: Product grade A
BS EN ISO 10673:1999 Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A
NS-EN ISO 10673:1998 Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A (ISO 10673:1998)
NS-EN ISO 7091:2000 Plain washers — Normal series — Product grade C (ISO 7091:2000)
DANSK DS/EN ISO 7093-2:2000 Plain washers - Large series - Part 2: Product grade C
NS-EN ISO 7094:2000 Plain washers - Extra large series - Product grade C (ISO 7094:2000)
AENOR UNE-EN ISO 7094:2000 Plain washers. Exta large series. Product grade C. (ISO 7094:2000).
BS 6373-1:1983 Burning behaviour of textiles and textile products. Glossarry of terms series 1
AENOR UNE-EN ISO 7091:2000 Plain washers. Normal series. Product grade C. (ISO 7091:2000).
AENOR UNE-EN ISO 10673:2010 Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A (ISO 10673:2009)
UNE-EN 2424:1996 AEROSPACE SERIES. MARKING OF AEROSPACE PRODUCTS.
NS-EN ISO 7089:2000 Plain washers — Normal series — Product grade A (ISO 7089:2000)
NS-EN ISO 10673:2009 Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009)
UNE-EN ISO 10673:1999 PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL, NORMAL AND LARGE SERIES. PRODUCT GRADE A. (ISO 10673:1998).
AENOR UNE-EN ISO 7090:2000 Flat chamfered washers. Normal series. Class A product. (ISO 7090:2000).
06/19994595 DC EN 2424. Aerospace series. Marking of aerospace products
DIN EN 9117 E:2017 Draft Document - Aerospace series - Delegated Product Release Verification; German and English version FprEN 9117:2017
DANSK DS/EN 9138:2019 Aerospace Series – Quality Management Systems – Statistical Product – Acceptance Requirements
ASD-STAN PREN 9138:2018 Aerospace Series - Quality Management Systems - Statistical Product Acceptance Requirements
DANSK DS/EN ISO 1119:2012 Geometrical product specifications (GPS) - Series of conical tapers and taper angles
NS-EN ISO 7090:2000 Plain washers, chamfered — Normal series — Product grade A (ISO 7090:2000)
BS EN ISO 1119:2002 Geometrical product specifications (GPS). Series of conical tapers and taper angles
ASD-STAN PREN 4840-002:2017 Aerospace series Heat shrinkable moulded shapes Part 002: Index of product standards and product dimensions
NS-EN 9138:2019 Aerospace Series — Quality Management Systems — Statistical Product — Acceptance Requirements
DIN EN 4840-002:2024 Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions; German and English version EN 4840-002:2023
ASD-STAN TR 4676:2009 Aerospace series Aluminium pigmented coatings Lists of commercial products
NS-EN 4840-002:2023 Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions
DANSK DS/EN 4840-002:2024 Aerospace series – Heat shrinkable moulded shapes – Part 002: Index of product standards and product dimensions
ASD-STAN TR 3040-2:2008 Aerospace Series Quality Assurance EN Aerospace Products Part 2 - List of Qualified Products
DIN EN ISO 10673 E:2008 Draft Document - Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO/DIS 10673:2007); German version prEN ISO 10673:2008
DANSK DS/EN 3848:2001 Aerospace series - Semi-finished metallic products - Methods of measuring form diviations
CSA DIR.004-1998 List of CSA Certified Plumbing Products
ASD-STAN PREN 3439:2017 Aerospace Series Lead-Acid Batteries for Aircraft of Format D Type Product Standard
AENOR UNE-EN ISO 7093-1:2000 Plain washers. Large series. Part 1: Product grade A. (ISO 7093-1:2000).
ASD-STAN PREN 3438:2017 Aerospace series Lead-acid batteries for aircraft of format C type Product standard
ASD-STAN PREN 4728:2013 Aerospace series Circuit breakers, single and three poles dummies Product standard
ASD-STAN PREN 3437:2017 Aerospace Series Lead-Acid Batteries for Aircraft of Format B Type Product Standard
ASD-STAN PREN 3436:2017 Aerospace Series Lead-Acid Batteries for Aircraft of Format A Type Product Standard
DIN EN 9138 E:2018 Draft Document - Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements; German and English version FprEN 9138:2018

GSO

OS GSO ISO 7092:2013 Plain washers -- Small series -- Product grade A
BH GSO ISO 7092:2016 Plain washers -- Small series -- Product grade A
GSO ISO 7092:2013 Plain washers -- Small series -- Product grade A
OS GSO ISO 7089:2013 Plain washers -- Normal series -- Product grade A
GSO ISO 7089:2013 Plain washers -- Normal series -- Product grade A
BH GSO ISO 7091:2016 Plain washers -- Normal series -- Product grade C
GSO ISO 7091:2013 Plain washers -- Normal series -- Product grade C
OS GSO ISO 10673:2013 Plain washers for screw and washer assemblies -- Small, normal and large series -- Product grade A
GSO ISO 15071:2015 Hexagon bolts with flange -- Small series -- Product grade A
BH GSO ISO 10673:2016 Plain washers for screw and washer assemblies -- Small, normal and large series -- Product grade A
BH GSO ISO 7093-1:2016 Plain washers -- Large series -- Part 1: Product grade A
GSO ISO 7090:2013 Plain washers, chamfered -- Normal series -- Product grade A
BH GSO ISO 7090:2016 Plain washers, chamfered -- Normal series -- Product grade A
OS GSO ISO 7093-1:2013 Plain washers -- Large series -- Part 1: Product grade A
OS GSO ISO 7090:2013 Plain washers, chamfered -- Normal series -- Product grade A
BH GSO ISO 15071:2016 Hexagon bolts with flange -- Small series -- Product grade A
GSO ISO 7093-2:2013 Plain washers -- Large series -- Part 2: Product grade C
OS GSO ISO 7093-2:2013 Plain washers -- Large series -- Part 2: Product grade C
BH GSO ISO 4162:2016 Hexagon bolts with flange -- Small series -- Product grade A with driving feature of product grade B
BH GSO ISO 1119:2022 Geometrical product specifications (GPS) — Series of conical tapers and taper angles
GSO ISO 1119:2021 Geometrical product specifications (GPS) — Series of conical tapers and taper angles
OS GSO ISO 15072:2014 Hexagon bolts with flange with metric fine pitch thread -- Small series -- Product grade A
GSO ISO 15072:2014 Hexagon bolts with flange with metric fine pitch thread -- Small series -- Product grade A

IT-UNI

UNI 5748-1966 Yarns by cotton way manifacture. Counts series.
UNI 5749-1966 Yarns by flax-hemp way manifacture. Counts series.

Danish Standards Foundation

DS/EN 2424:2008 Aerospace series - Marking of aerospace products
DS/EN ISO 7092:2000 Plain washers - Small series - Product grade A
DS/ISO 7089:1986 Plain washers. Normal series. Product grade A
DS/ISO 7092:1986 Plain washers. Small series. Product grade A
DS/EN ISO 7089:2000 Plain washers - Normal series - Product grade A
DS/EN ISO 7091:2000 Plain washers - Normal series - Product grade C
DS/EN ISO 7094/AC:2002 Plain washers - Extra large series - Product grade C
DS/ISO 7091:1986 Plain washers. Normal series. Product grade C
DS/EN ISO 7094:2000 Plain washers - Extra large series - Product grade C
DS/ISO 7094:1986 Plain washers. Extra large series. Product grade C
DS/ISO 7090:1986 Plain washers, chamfered. Normal series. Product grade A
DS/EN ISO 1119:2012 Geometrical product specifications (GPS) - Series of conical tapers and taper angles
DS/ISO 7093:1986 Plain washers. Large series. Product grades A and C
DS/EN ISO 7090:2000 Plain washers, chamfered - Normal series - Product grade A
DS/EN ISO 7093-2:2000 Plain washers - Large series - Part 2: Product grade C
DS/EN ISO 7093-1:2000 Plain washers - Large series - Part 1: Product grade A
DS/EN ISO 10669:2000 Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A

Lithuanian Standards Office

LST EN 2424-2008 Aerospace series - Marking of aerospace products
LST EN ISO 7092:2002 Plain washers - Small series - Product grade A (ISO 7092:2000)
LST EN ISO 7094+AC:2002 Plain washers - Extra large series - Product grade C (ISO 7094:2000)
LST EN ISO 7089:2002 Plain washers - Normal series - Product grade A (ISO 7089:2000)
LST EN ISO 7091:2002 Plain washers - Normal series - Product grade C (ISO 7091:2000)
LST EN ISO 7090:2002 Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000)
LST EN ISO 1119:2012 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)

British Standards Institution (BSI)

BS EN ISO 7092:2000(2021) Plain washers – Small series – Product grade A
BS EN ISO 7094:2000(2021) Plain washers — Extra large series — Product grade C
BS EN ISO 7091:2000(2021) Plain washers – Normal series – Product grade C
BS EN ISO 7093-1:2000 Plain washers. Large series. Product grade A
BS EN ISO 7091:2000 Plain washers. Normal series. Product grade C
BS EN ISO 7093-2:2000 Plain washers. Large series. Product grade C
BS EN ISO 7092:2000 Plain washers. Small series. Product grade A
BS EN ISO 7089:2000 Plain washers. Normal series. Product grade A
BS EN 9117:2017 Aerospace series. Delegated Product Release Verification
BS EN ISO 7094:2000 Plain washers. Extra large series. Product grade C
19/30389262 DC BS EN 7110. Aerospace series. Bolt, 12 point flange head, metric series. Product standard
BS EN ISO 7093-2:2000(2021) Plain washers – Large series Part 2 : Product grade C
BS EN ISO 7090:2000 Plain washers, chamfered. Normal series. Product grade A
BS EN 4840-002:2023 Aerospace series. Heat shrinkable moulded shapes. Index of product standards and product dimensions
BS EN ISO 7093-1:2000(2021) Plain washers – Large series Part 1 : Product grade A
BS EN 2424:2008 Aerospace series - Marking of aerospace products
BS EN 2240-055:2011 Aerospace series. Lamps, incandescent. Lamp, code 1495. Product standard
18/30375254 DC BS EN 7100. Aerospace series. Bolt, hexagonal head, metric and inch series. Product standard
BS ISO 4162:2012 Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B
BS EN 2240-060:2011 Aerospace series. Lamps, incandescent. Lamp, code 1619. Product standard
BS EN 2240-004:2010 Aerospace series - Lamps, incandescent - Lamp, code 47 - Product standard
BS EN 2240-053:2011 Aerospace series. Lamps, incandescent. Lamp, code 1308. Product standard
BS EN 50370-1:2005 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Emission
BS EN 2240-007:2009 Aerospace series - Lamps, incandescent - Lamp, code 74 - Product standard
BS EN 2240-005:2009 Aerospace series - Lamps, incandescent - Lamp, code 73 - Product standard
BS EN 2240-057:2011 Aerospace series. Lamps, incandescent. Lamp, code 1512. Product standard
BS EN 2240-044:2010 Aerospace series - Lamps, incandescent - Lamp, code 713 - Product standard
BS EN 2240-003:2010 Aerospace series - Lamps, incandescent - Lamp, code 44 - Product standard
BS EN 2240-036:2010 Aerospace series - Lamps, incandescent - Lamp, code 388 - Product standard
BS EN 2240-052:2011 Aerospace series. Lamps, incandescent. Lamp, code 1222. Product standard
BS EN 2240-043:2010 Aerospace series - Lamps, incandescent - Lamp, code 685 - Product standard
BS EN 2240-045:2010 Aerospace series - Lamps, incandescent - Lamp, code 714 - Product standard
BS EN 2240-009:2009 Aerospace series - Lamps, incandescent - Lamp, code 83 - Product standard
BS EN 2240-010:2010 Aerospace series - Lamps, incandescent - Lamp, code 84 - Product standard
BS EN 2240-008:2009 Aerospace series - Lamps, incandescent - Lamp, code 75 - Product standard
BS EN 2240-006:2009 Aerospace series - Lamps, incandescent - Lamp, code 73E - Product standard
BS EN 2240-050:2010 Aerospace series - Lamps, incandescent - Lamp, code 1064 - Product standard
BS EN 2240-046:2010 Aerospace series - Lamps, incandescent - Lamp, code 715 - Product standard
BS EN 2240-047:2010 Aerospace series - Lamps, incandescent - Lamp, code 718 - Product standard
BS EN 9138:2019 Aerospace Series. Quality Management Systems. Statistical Product. Acceptance Requirements
BS EN 2240-030:2010 Aerospace series - Lamps, incandescent - Lamp, code 345 - Product standard
BS EN 2240-029:2010 Aerospace series - Lamps, incandescent - Lamp, code 338 - Product standard
BS EN 2240-013:2010 Aerospace series - Lamps, incandescent - Lamp, code 301 - Product standard
BS EN 2240-031:2010 Aerospace series - Lamps, incandescent - Lamp, code 356 - Product standard
BS EN 2240-026:2010 Aerospace series - Lamps, incandescent - Lamp, code 330 - Product standard
BS EN 2240-063:2011 Aerospace series. Lamps, incandescent. Lamp, code 1815. Product standard
BS EN 2240-061:2011 Aerospace series. Lamps, incandescent. Lamp, code 1683. Product standard
BS EN 2240-065:2011 Aerospace series. Lamps, incandescent. Lamp, code 1820. Product standard
BS EN 4165-003:2016 Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous. Modules series 2 and series 3. Product standard
BS EN 2240-051:2011 Aerospace series. Lamps, incandescent. Lamp, code 1163. Product standard
BS EN 2240-054:2011 Aerospace series. Lamps, incandescent. Lamp, code 1317. Product standard
BS EN 2240-058:2011 Aerospace series. Lamps, incandescent. Lamp, code 1524. Product standard
BS EN 2240-066:2011 Aerospace series. Lamps, incandescent. Lamp, code 1829. Product standard
BS EN 2240-025:2010 Aerospace series - Lamps, incandescent - Lamp, code 328 - Product standard
BS EN 2240-040:2010 Aerospace series - Lamps, incandescent - Lamp, code 680 - Product standard
BS EN 2240-037:2010 Aerospace series - Lamps, incandescent - Lamp, code 394 - Product standard
BS EN 2240-018:2010 Aerospace series - Lamps, incandescent - Lamp, code 307 - Product standard
BS EN 2240-064:2011 Aerospace series. Lamps, incandescent. Lamp, code 1819. Product standard
19/30389265 DC BS EN 7111. Aerospace series. Bolt, hexagonal head, shoulder shank, metric and inch series. Product standard
BS EN ISO 1119:2011 Geometrical product specifications (GPS). Series of conical tapers and taper angles
BS EN 2240-068:2011 Aerospace series. Lamps, incandescent. Lamp, code 1864. Product standard
BS EN 2240-056:2011 Aerospace series. Lamps, incandescent. Lamp, code 1506. Product standard
BS EN 2240-059:2011 Aerospace series. Lamps, incandescent. Lamp, code 1591. Product standard
BS EN 2240-027:2010 Aerospace series - Lamps, incandescent - Lamp, code 334 - Product standard
BS EN 2240-035:2010 Aerospace series - Lamps, incandescent - Lamp, code 387 - Product standard
BS EN 2240-024:2010 Aerospace series - Lamps, incandescent - Lamp, code 327 - Product standard
BS EN 2240-023:2010 Aerospace series - Lamps, incandescent - Lamp, code 316 - Product standard
BS EN 2240-020:2010 Aerospace series - Lamps, incandescent - Lamp, code 311 - Product standard
BS EN 2240-033:2010 Aerospace series - Lamps, incandescent - Lamp, code 377 - Product standard
BS EN 2240-028:2010 Aerospace series - Lamps, incandescent - Lamp, code 337 - Product standard
BS EN 2240-016:2010 Aerospace series - Lamps, incandescent - Lamp, code 305 - Product standard
BS EN 2240-039:2010 Aerospace series - Lamps, incandescent - Lamp, code 600 - Product standard
BS EN 2240-015:2010 Aerospace series - Lamps, incandescent - Lamp, code 304 - Product standard
BS EN 2240-019:2010 Aerospace series - Lamps, incandescent - Lamp, code 308 - Product standard
BS EN 2240-017:2010 Aerospace series - Lamps, incandescent - Lamp, code 306 - Product standard
BS EN 2240-049:2010 Aerospace series - Lamps, incandescent - Lamp, code 757 - Product standard
BS EN 2240-062:2011 Aerospace series. Lamps, incandescent. Lamp, code 1810. Product standard
BS EN 2240-069:2011 Aerospace series. Lamps, incandescent. Lamp, code 1978. Product standard
BS EN 2240-014:2010 Aerospace series - Lamps, incandescent - Lamp, code 303 - Product standard
BS EN 2240-034:2010 Aerospace series - Lamps, incandescent - Lamp, code 382 - Product standard
BS EN 2240-011:2010 Aerospace series - Lamps, incandescent - Lamp, code 85 - Product standard
BS EN 2240-041:2010 Aerospace series - Lamps, incandescent - Lamp, code 682 - Product standard
BS EN 2240-042:2010 Aerospace series - Lamps, incandescent - Lamp, code 683 - Product standard
BS EN 2240-022:2010 Aerospace series - Lamps, incandescent - Lamp, code 315 - Product standard
BS EN 2240-032:2010 Aerospace series - Lamps, incandescent - Lamp, code 376 - Product standard
BS EN 2240-021:2010 Aerospace series - Lamps, incandescent - Lamp, code 313 - Product standard
BS EN 2240-012:2010 Aerospace series - Lamps, incandescent - Lamp, code 95 - Product standard
BS EN 2240-038:2010 Aerospace series - Lamps, incandescent - Lamp, code 401 - Product standard
BS EN 4165-003:2008 Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature 175 °C continuous — Part 003: Modules series 2 and series 3 — Product standard
BS EN ISO 2538-1:2014 Geometrical product specifications (GPS). Wedges. Series of angles and slopes
18/30375257 DC BS EN 7101. Aerospace series. Bolt, cylindrical head, hexagonal socket, metric and inch series. Product standard
BS EN 4056-002:2014 Aerospace series. Cable ties for harnesses. Index of product standards
BS EN 50370-2:2003 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Immunity
BS EN 2240-067:2011 Aerospace series. Lamps, incandescent. Lamp, code 1843. Product standard
BS EN 2240-048:2010 Aerospace series - Lamps, incandescent - Lamp, code 718 NPC - Product standard
BS EN 2240-100:2011 Aerospace series. Lamps, incandescent. Lamp, code 2078. Product standard
BS EN 2240-070:2011 Aerospace series. Lamps, incandescent. Lamp, code 2232. Product standard

German Institute for Standardization

DIN EN ISO 7092:2019-05 Plain washers - Small series - Product grade A (ISO 7092:2000); German version EN ISO 7092:2000
DIN EN ISO 7091:2000 Plain washers - Normal series, Product grade C (ISO 7091:2000); German version EN ISO 7091:2000
DIN EN 9117:2017 Aerospace series - Delegated Product Release Verification; German and English version EN 9117:2017
DIN EN ISO 7089:2000 Plain washers - Normal series, Product grade A (ISO 7089:2000); German version EN ISO 7089:2000
DIN EN ISO 7089:2000-11 Plain washers - Normal series, Product grade A (ISO 7089:2000); German version EN ISO 7089:2000
DIN EN ISO 7091:2019-04 Plain washers - Normal series - Product grade C (ISO 7091:2000); German version EN ISO 7091:2000
DIN EN ISO 7092:2000 Plain washers - Small series, Product grade A (ISO 7092:2000); German version EN ISO 7092:2000
DIN EN ISO 7094:2000 Plain washers - Extra large series, product grade C (ISO 7094:2000); German version EN ISO 7094:2000
DIN EN ISO 10673:2009-10 Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009); German version EN ISO 10673:2009
DIN EN 9117:2017-12 Aerospace series - Delegated Product Release Verification; German and English version EN 9117:2017
DIN EN 2424:2008-10 Aerospace series - Marking of aerospace products; German and English version EN 2424:2008
DIN EN ISO 7090:2000-11 Plain washers, chamfered - Normal series, Product grade A (ISO 7090:2000); German version EN ISO 7090:2000
DIN EN ISO 7092:2019 Plain washers - Small series - Product grade A (ISO 7092:2000)
DIN EN ISO 7093-1:2000-11 Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000); German version EN ISO 7093-1:2000
DIN EN ISO 7091:2019 Plain washers - Normal series - Product grade C (ISO 7091:2000)
DIN EN ISO 7094:2000-12 Plain washers - Extra large series, product grade C (ISO 7094:2000); German version EN ISO 7094:2000
DIN EN 2424:2008 Aerospace series - Marking of aerospace products; German and English version EN 2424:2008
DIN EN ISO 7093-2:2000-11 Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000); German version EN ISO 7093-2:2000
DIN EN ISO 7093-2:2000 Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000); German version EN ISO 7093-2:2000
DIN EN ISO 1119:2012 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011); German version EN ISO 1119:2011
DIN EN ISO 7093-1:2000 Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000); German version EN ISO 7093-1:2000
DIN EN 16602-10:2017 Space product assurance - Product assurance management; English version EN 16602-10:2017
DIN EN 4840-002:2018 Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions; German and English version FprEN 4840-002:2018
DIN EN 3848:2003 Aerospace series - Semi-finished metallic products - Methods of measuring form deviations; German and English version EN 3848:2001
DIN EN ISO 1119:2012-04 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011); German version EN ISO 1119:2011
DIN EN 9138:2020-12 Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements; German and English version EN 9138:2019
DIN EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products; German and English version EN 9133:2018
DIN EN 4840-002:2022-08 Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions; German and English version FprEN 4840-002:2022 / Note: Date of issue 2022-07-22
DIN EN 4840-002:2024-04 Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions; German and English version EN 4840-002:2023
DIN EN 4709-001:2021-08 Aerospace series - Unmanned Aircraft Systems - Part 001: Product requirements and verification; English version prEN 4709-001:2021 / Note: Date of issue 2021-07-02
DIN EN 4165-003:2008 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard; German and English version EN 4165-003:2008

SE-SIS

SIS SS-ISO 7091:1988 Plain washers — Normal series — Product grade C
SIS SS 3576-1990 Plain washers — Normal series — Product grade A
SIS SS 70-1988 Plain washers — Inch series — Product grade A
SIS SS 3576-1988 Plain washers — Normal series — Product grade A
SIS SS 71-1988 Plain washers — Inch series — Product grade C
SIS SS-ISO 7092:1988 Plain washers — Small series — Product grade A
SIS SS 3577-1988 Thick plain washers — Metric series — Product grade A
SIS SS 1466-1988 Thick plain washers — Inch series — Product grade A
SIS SS-ISO 7093:1989 Plain washers — Large series — Product grades A and C

Association Francaise de Normalisation

NF E25-529*NF EN ISO 7092:2000 Plain washers - Small series - Product grade A
NF E25-532*NF EN ISO 7094:2000 Plain washers - Extra large series - Product grade C
NF E25-528*NF EN ISO 7091:2000 Plain washers - Normal series - Product grade C
NF E25-526*NF EN ISO 7089:2000 Plain washers - Normal series - Product grade A.
NF L00-117*NF EN 9117:2017 Aerospace series - Delegated Product Release Verification
NF EN 4637:2010 Aerospace series - Spraying product - White corundum
NF EN 2424:2008 Série aérospatiale - Marquage des produits aérospatiaux
NF EN ISO 1119:2012 Geometrical Product Specification (GPS) – Cone and Taper Angle Series
NF EN 2486:2005 Aerospace series - Aluminum alloy AL-P2618A - Products for forging
NF EN 4292:2005 Aerospace series - Aluminum alloy AL-R39002 - Products intended for forging
NF EN 4638:2010 Aerospace series - Spraying product - Iron-free brown corundum
NF L09-010*NF EN 2424:2008 Aerospace series - Marking of aerospace products
NF EN 9117:2017 Aerospace series - Delegation of product inspection before delivery
NF E01-011*NF EN ISO 1119:2012 Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles
NF EN 4287:2005 Aerospace series - AL-P7010 aluminum alloy - Products for forging
NF E25-531*NF EN ISO 7093-2:2000 Plain washers - Large series - Part 2 : product grade C
NF E25-530*NF EN ISO 7093-1:2000 Plain washers - Large series - Part 1 : product grade A
NF L00-138*NF EN 9138:2019 Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements
NF D65-030:2007 Shop/Store product display equipement - Recommendations concerning the conditions for product display
NF EN 4840-002:2023 Aerospace series - Heat shrink sleeves - Part 002: product standards index and product dimensions
NF E25-527*NF EN ISO 7090:2000 Plain washers, chamfered - Normal series - Product grade A.
NF EN 4615:2006 Aerospace Series - Magnesium Alloy MG-C18002 - T4 - Sand Cast Product
NF E01-011:1998 Geometrical Product Specifications (GPS). Series of conical tapers and taper angles.
NF EN 4291:2005 Aerospace series - Aluminum alloy AL-P8090- - Products intended for forging
NF EN 4289:2019 Aerospace series - Aluminum alloy AL-P7175 - Products intended for forging
NF EN 2731:2006 Aerospace Series - Magnesium Alloy MG-C46001 - T6 - Sand Cast Product
NF A48-720:1983 FOUNDRY PRODUCTS. CAST IRON DRAINAGE PIPES AND FITTINGS WITHOUT PRESSURE. SPIGOT AND SOCKET ENDED SERIES OR SO-CALLED EU SERIES. SPIGOT SERIES OR SO-CALLED UU SERIES.
NF EN 9138:2019 Aerospace series - Quality management systems - Statistical product acceptance requirements
NF E01-012:1998 Geometrical Product Specifications (GPS). Series of angles and slopes on prisms.
NF L00-104*NF EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
NF A48-508:1956 FOUNDRY PRODUCTS. CAST IRON PIPING ELEMENTS. "FLANGED" OR "BR" SERIES. FITTINGS. SLEEVES FOR CUTTING TO LENGTH.
NF A48-504:1956 FOUNDRY PRODUCTS. CAST IRON PIPING ELEMENTS. "FLANGED" OR "BR" SERIES. JOINTS. JOINT WASHERS.
NF EN 4700-007:2012 Série aérospatiale - Aciers et alliages résistant à chaud - Produits corroyés - Spécification technique - Partie 007 : produits pour refusion
NF EN 2732:2005 Aerospace Series - Magnesium Alloy MG-C46001- T6 - Shell Cast Product
NF L17-102:2012 Aerospace series - Rubbers - Marking and identification of the products.
NF A48-515:1956 FOUNDRY PRODUCTS. CAST IRON PIPING ELEMENTS. "FLANGED" OR "BR" SERIES. FITTINGS. BLANK PLATES.
NF A48-502:1956 FOUNDRY PRODUCTS. CAST IRON PIPING ELEMENTS. "FLANGED" OR "BR" SERIES. JOINTS. FLANGE DIMENSIONS.
NF E48-602:1982 LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS. CLASS L. CLASSIFICATION. FAMILLE H. "HYDRAULIC SYSTEM".
NF S61-940:2000 Systèmes de Sécurité Incendie (S.S.I) - Alimentations Électriques de Sécurité (A.E.S.) - Règles de conception

International Organization for Standardization (ISO)

ISO 7091:1983 Plain washers; Normal series; Product grade C
ISO 7092:2000 Plain washers - Small series - Product grade A
ISO 7089:1983 Plain washers; Normal series; Product grade A
ISO 7092:1983 Plain washers; Small series; Product grade A
ISO 7091:2000 Plain washers - Normal series - Product grade C
ISO 7094:2000 Plain washers - Extra large series - Product grade C
ISO 7089:2000 Plain washers - Normal series - Product grade A
ISO 7094:1983 Plain washers; Extra large series; Product grade C
ISO 7093:1983 Plain washers; Large series; Product grades A and C
ISO 7090:1983 Plain washers, chamfered; Normal series; Product grade A
ISO 7090:2000 Plain washers, chamfered - Normal series - Product grade A
ISO 4162:2012 Hexagon bolts with flange - Small series - Product grade A with driving feature of product grade B
ISO 15071:1999 Hexagon bolts with flange - Small series - Product grade A
ISO 7093-1:2000 Plain washers - Large series - Part 1: Product grade A
ISO 7093-2:2000 Plain washers - Large series - Part 2: Product grade C
ISO 15071:2011 Hexagon bolts with flange - Small series - Product grade A
ISO/TS 13409:2002 Sterilization of health care products - Radiation sterilization - Substantiation of 25 kGy as a sterilization dose for small or infrequent production batches
ISO 1119:1998 Geometrical Product Specifications (GPS) - Series of conical tapers and taper angles
ISO 7094:2000/cor 1:2000 Plain washers - Extra large series - Product grade C; Technical Corrigendum 1
ISO 1119:2011 Geometrical product specifications (GPS) - Series of conical tapers and taper angles

RO-ASRO

STAS 5200/6-1991 Plain washers. Estra large series. Product grade C

RU-GOST R

GOST ISO 7092-2016 Plain washers. Small series. Product grade A
GOST ISO 7093-1-2016 Plain washers. Large series. Part 1. Product grade A
GOST ISO 7093-2-2016 Plain washers. Large series. Part 2. Product grade C

European Committee for Standardization (CEN)

EN 9117:2017 Aerospace series - Delegated Product Release Verification
EN ISO 7092:2000 Plain Washers - Small Series - Product Grade A ISO 7092:2000
EN ISO 7089:2000 Plain Washers - Normal Series - Product Grade A ISO 7089:2000
EN ISO 7091:2000 Plain Washers - Normal Series - Product Grade C ISO 7091:2000
EN ISO 7090:2000 Plain Washers, Chamfered - Normal Series - Product Grade A ISO 7090:2000
EN ISO 7094:2000 Plain washers - Extra large series - Product grade C (ISO 7094:2000)
EN ISO 1119:2011 Geometrical product specifications (GPS) - Series of conical tapers and taper angles
EN ISO 2538:2003 Geometrical product specfications (GPS) - Series of angles and slopes on prisms ISO 2538:1998
EN 4840-002:2023 Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions
EN 3682-004:2012 Aerospace series - Connectors, plug and receptacle, electrical, rectangular, interchangeable insert type, rack to panel, operating temperature 150 °C continuous - Part 004: Size 2 receptacle - Product standard

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

TR 3040-2-2008 Aerospace Series Quality Assurance EN Aerospace Products Part 2 - List of Qualified Products (Edition 8)
TR 3040-2-2000 Serie Aerospatiale Assurance Qualite Produits Aerospatiaux EN Partie 2 - Liste Des Produits Qualifies (Edition 7)
TR 3040-2-1996 Serie Aerospatiale Assurance Qualite Produits Aerospatiaux EN Partie 2 - Liste Des Produits Qualifies (Edition 4)
PREN 8.6013-2001 Aerospace Series Qualification Procedure for Aerospace Products (Edition P1)
PREN 9117-2016 Aerospace series Delegated Product Release Verification (Edition P 1)
TR 3970-1996 Aerospace Series Designation Codes for Semi-Finished Metallic Products (Edition 1)
PREN 2424-2006 Aerospace Series Marking of Aerospace Products (Edition P 1)

European Association of Aerospace Industries

AECMA PREN 2600-1987 Aerospace Series Designation of Metallic Semi-Finished Products Rules Edition P1
AECMA PREN 3848-1994 Aerospace Series Semi-Finished Metallic Products Method of Measuring for from Deviations Edition P1
AECMA PREN 3848-1996 Aerospace Series Semi-Finished Metallic Products Methods of Measuring from Deviations Edition P2
AECMA TR 3970-1996 Aerospace Series Designation Codes for Semi-Finished Metallic Products Edition 1
AECMA TR 4676-2009 Aerospace series Aluminium pigmented coatings Lists of commercial products Edition 1
AECMA PREN 2495-1989 Aerospace Series Single-Pole Circuit Breakers Temperature Compensated Rated Currents up to 25 A Product Standard Edition 1
AECMA PREN 2424-2006 Aerospace Series Marking of Aerospace Products Edition P 1
AECMA PREN 3445-1996 Aerospace Series Guidelines for the Permissible Storage Life of Rubber Products
AECMA PREN 2346-002-1997 Aerospace Series Cable, Electrical, Fire Resistant Part 002: List and Code of Product Standards Supersedes 3E: 08/96
AECMA PREN 8.6013-2001 Aerospace Series Qualification Procedure for Aerospace Products Edition P1
AECMA PREN 2716-1996 Aerospace Series Test Method Determination of Susceptibility to Intergranular Corrosion Wrought Aluminium Alloy Products AL-P2XXX- Series, AL-P7XXX- Series and Aluminium-Lithium Alloys Edition P 2
AECMA PREN 2000-1998 Aerospace Series Quality Assurance EN Aerospace Products Approval of the Quality System of Manufacturers Edition 3
AECMA PREN 2717-1996 Aerospace Series Test Methods Determination of Susceptibility to Intergranular Corrosion Wrought Aluminium Alloy Products in AL-P5XXX- Series with a Magnesium Content Greater Than or Equal to 3,5% Edition P 2
AECMA PREN 2000-1989 Aerospace Series Quality Assurance EN Aerospace Products Approval of the Quality System of Manufacturers Edition 2
AECMA PREN 2000-2003 Aerospace Series Quality Assurance EN Aerospace Products Approval of the Quality Systems of Manufacturers Edition 4
AECMA PREN 3235-1-1993 Aerospace Series Heat Resisting Alloys Wrought Products Technical Specification Part 1 - General Requirements Edition P 1
AECMA PREN 3114-1-1994 Aerospace Series Microstructure of (a + b) Titanium Alloy Wrought Products Part 1: General Requirements Issue P 1
AECMA PREN 3235-2-1993 Aerospace Series Heat Resisting Alloys Wrought Products Technical Specification Part 2 - Plate, Sheet and Strip Edition P 1
AECMA PREN 3114-2-1997 Aerospace Series Test Method Microstructure (a + b) Titanium Alloy Wrought Products Part 2: Microstructure of Bars, Sections, Forging Stock and Forgings Edition P 1

GOSTR

GOST R ISO 10673-2017 Plain washers for screw with washer assemblies. Small, normal and large series. Product grade A

CEN - European Committee for Standardization

EN ISO 10673:2009 Plain washers for screw and washer assemblies - Small@ normal and large series - Product grade A
EN ISO 1119:2002 Geometrical product specifications (GPS) - Series of conical tapers and taper angles
PREN 1094-8-2005 Insulating refractory products - Terminology for alkaline earth silicate (AES) wools

CZ-CSN

CSN 50 0040-1967 Paper and paperboard produota — A, B and C series of trimmed sizes

KR-KS

KS B ISO 2538-2014 Geometrical Product Specifications(GPS) — Series of angles and slopes on prisms
KS B ISO 15071-2017 Hexagon bolts with flange－Small series－Product grade A

ES-UNE

UNE-EN 9117:2017 Aerospace series - Delegated Product Release Verification (Endorsed by Asociación Española de Normalización in November of 2017.)
UNE-EN 2424:2008 Aerospace series - Marking of aerospace products (Endorsed by AENOR in July of 2008.)
UNE-EN 9138:2019 Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements (Endorsed by Asociación Española de Normalización in December of 2019.)
UNE-EN 4840-002:2023 Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions (Endorsed by Asociación Española de Normalización in February of 2024.)

KP-CSK

KPS 858-2002 Geometrical product specifications (GPS) - Series of conical tapers and taper angles

AENOR

UNE-EN ISO 7092:2000 Plain washers. Small series. Product grade A. (ISO 7092:2000).
UNE-EN ISO 7089:2000 Plain washers. Normal series. Product grade A. (ISO 7089:2000).
UNE-EN ISO 7091:2000 Plain washers. Normal series. Product grade C. (ISO 7091:2000).
UNE-EN ISO 10673:2010 Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A (ISO 10673:2009)
UNE-EN ISO 7094:2000 Plain washers. Exta large series. Product grade C. (ISO 7094:2000).
UNE-EN ISO 7090:2000 Plain washers, chamfered. Normal series. Product grade A. (ISO7090:2000).
UNE-EN ISO 1119:2012 Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011)

American Society for Testing and Materials (ASTM)

ASTM UOP714-87 Metals in Miscellaneous Samples by ICP-AES

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 9117-2016 Aerospace series Delegated Product Release Verification (Edition P 1)
ASD-STAN TR 4070-1999 Serie Serospatiale Revetements A Base De Bisulfure De Molybdene Liste De Produits Commerciaux (Edition 1)

Japanese Industrial Standards Committee (JISC)

JIS B 1257:2004 Plain washers for tapping screw and washer assemblies -- Normal and large series -- Product grade A
JIS B 0612:2017 Geometrical product specifications (GPS) -- Series of conical tapers and taper angles
JIS B 0612:2002 Geometrical Product Specifications (GPS) -- Series of conical tapers and taper angles

European Standard for Electrical and Electronic Components

CECC MUAHAG VOL 15 IS 2-1994 Preferred Products List; Batteries (En)

PT-IPQ

NP 40-1961 Materials used in the kitchen. Rolled aluminum plate. Medium series products
NP 38-1961 Materials used in the kitchen. Rolled high aluminum plate. Medium series products

GOST

GOST 22851-1977 Selection of a range of quality indicators for industrial products. Basic provisions

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T K.48-2003 EMC Requirements for each telecommunication equipment - Product family Recommendation Series K: Protection Against Interference (Study Group 5)

PL-PKN

PN C96099-04-1992 Petroleum products Classification of lubricants, industrial oils and related products according to application (Class L) Classification of family C (gears)