two laboratories

two laboratories, Total:265 items.

The international standard classification for "two laboratories" includes: Geology. Meteorology. Hydrology , Laboratory medicine , Air quality , Laboratory ware and related apparatus , Analytical chemistry in general , Product and company certification. Conformity assessment , Test conditions and procedures in general .

The Chinese standard classification for "two laboratories" includes: Meteorology , Medical laboratory equipment , Basic standards and general methods , Physical property analyzer , Electrochemical, thermochemistry and optical profile type analyzer , Medical apparatus and devices in general , Standardization and Quality Management , Electric transmission and transformation equipment in general , Actuator .

National Metrological Verification Regulations of the People's Republic of China

JJG(烟草)21-2010 Tobacco—Verification Regulation of Atmosphere Condition for Laboratory
JJG(烟草)21-2021 Atmosphere Condition for Tobacco Laboratory
JJG(烟草) 21-2021 Tobacco Laboratory Atmospheric Environment
JJG(烟草) 21-2010 Tobacco-verification Regulation of Atmosphere Condition for Laboratory

Group Standards of the People's Republic of China

T/LAIA 01-2024 Green Testing Laboratory Evaluation of Chemical Testing Laboratory
T/BBDA 001-2023 Construction and implementation guidelines for big data training laboratory

National Metrological Technical Specifications of the People's Republic of China

JJF 1575-2016 Program of Pattern Evaluation of Laboratory pH Meters

Professional Standard - Meteorology

QX/T 220-2013 Technical requirements for metrology laboratory of atmospheric pressnre

Professional Standard - Agriculture

JJG(烟草) 21-2003 Tobacco Laboratory Testing Regulations for Strong Wind Environment
CNAS-AL23-2020 Relationship between good laboratory practice and laboratory accreditation
水产品质量安全检验手册 1.1.1.3-2005 Chapter 1 General Introduction Section 1 Laboratory Management 1. Laboratory Layout and Indoor Facilities Requirements (3) Laboratory Ventilation System
水产品质量安全检验手册 1.1.1.2-2005 Chapter 1 General Introduction Section 1 Laboratory Management 1. Laboratory Layout and Indoor Facilities Requirements (2) Laboratory Layout
CNAS-EL-04-2020 Instructions for the accreditation review management of large comprehensive laboratories
水产品质量安全检验手册 1.1.1.1-2005 Chapter 1 General Introduction Section 1 Laboratory Management 1. Laboratory layout and indoor facility requirements (1) Laboratory location selection

Professional Standard - Commodity Inspection

SN/T 4239-2015 Management requirements for large equipment of chemical analysis in laboratory
SN/T 3955.5-2014 Breeding method of important vectors at frontier ports - Part 5:Breeding method of Blattella germanica (Periplaneta americana,Periplaneta australasiae,Periplaneta brunnea)

Professional Standard - Nuclear Industry

EJ/T 1083-1998 Measurement control program of analytical chemistry laboratory for nuclear materials
EJ/T 715-2012 Guidelines for developing quality assurance programs for physical and chemical analysis laboratories in the nuclear industry
EJ/T 1083-2012 Nuclear Material Analytical Chemistry Laboratory Measurement Control Program
EJ/T 715-1998 Standard guide for establishing a quality assurance program for analytical chemistry and physical measurement laboratories within the nuclear industry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11165-2005 pH meter
GB/T 11165-1989 Laboratory pH meter
GB/T 43278-2023 Medical laboratories—Application of risk management to medical laboratories
GB/T 37940-2019 General technical specification for mobil laboratory of atmospheric environmental monitoring
GB/T 22275.3-2008 Requirements of conduct for good laboratory practice - Part 3: Compliance of laboratory suppliers with GLP principles
GB/Z 30154-2013 Medical laboratories—Guidance on laboratory implementation of GB/T 22576—2008

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1710.9-2013 Giant Panda Quarantine Technology—Technical Specifications for Tick Laboratory Testing
DB51/T 1710.6-2013 Giant Panda Quarantine Technology—Technical Specifications for Laboratory Detection of Escherichia coli—Real-time Fluorescent PCR Method
DB51/T 1710.10-2013 Giant Panda Quarantine Technology—Technical Specifications for Laboratory Testing of Demodex
DB51/T 1710.8-2013 Quarantine Technology of Giant Panda—Technical Specifications for Laboratory Detection of Foot Mite
DB51/T 1710.5-2013 Giant Panda Quarantine Technology—Technical Specifications for Laboratory Detection of Enteroinvasive Escherichia coli (EIEC O152) in Giant Pandas

Professional Standard - Machinery

JB/T 7439.6-1994 Terminology relating to laboratory instruments - Laboratory centrifuge

Military Standard of the People's Republic of China-General Armament Department

GJB 150.28-2009 Laboratory environmental test methods for military materiel - Part 28: Acidic atmosphere test
GJB 150.13A-2009 Laboratory environmental test methods for military materiel - Part 13: Explosive atmosphere test
GJB 2725-1996 General requirements for calibration laboratories and testing laboratories
GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories

国家质量监督检验检疫总局

SN/T 2294.7-2016 Inspection and Quarantine Laboratory Management Part 7: Laboratory Naming Rules

Professional Standard - Energy

NB/T 42024-2013 Traceability of Heavy Direct Current Measure System Based on Standard Shunts in High Power Laboratory

未注明发布机构

GJB 15481-2001 General requirements for competence of testing and calibration laboratories
DIN 12918-2 E:2008-03 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases

机械工业部

JB 6245-1992 Laboratory ion meter

工业和信息化部/国家能源局

JB/T 6245-2017 Laboratory ion meters

Professional Standard - Geology

DZ/T 0016-1991 Shaking table for laboratory

AENOR

UNE 40248-5:1982 METHOD FOR DETERMINATION OF THE BUNDLE STRENGHT OF WOOL FIBRES. EXPERIENCE VALUES CONCERNING OF THE COEFFICIENT OF VARIATION WTHIN ET BETWEEN LABORATORIES, CONFIDENCE INTERVAL AND MAXIMUN DIFFERENCE BETWEEN TWO LABORATORIES
UNE-ISO/TR 22869:2007 IN Medical laboratories. Guidance on laboratory implementation of ISO 15189: 2003. (ISO/TR 22869:2005)
UNE-EN 60477-2/A1:1999 LABORATORY RESISTORS. PART 2: LABORATORY A.C. RESISTORS
UNE-EN 60477-2:1999 LABORATORY RESISTORS. PART 2: LABORATORY A.C. RESISTORS
UNE-EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods

Military Standards (MIL-STD)

DOD A-A-51289-1985 MAGNIFIER, (DENTAL LABORATORY)
DOD A-A-51101 B-1991 BEAKER, LABORATORY (BOROSILICATE GLASS)
DOD A-A-51358-1986 TONGS, LABORATORY
DOD A-A-53020-1987 BEAD, LABORATORY
DOD A-A-51680-1987 BURNER, GAS, LABORATORY
DOD A-A-54127-1990 TUBE, DRYING, LABORATORY
DOD MIL-T-36022 B VALID NOTICE 1-1990 TABLE, OPHTHALMIC LABORATORY
DOD A-A-51000-1985 RACK, TEST TUBE, LABORATORY
DOD A-A-53950-1989 RACK, TEST TUBE, LABORATORY

SCC

AWWA WQTC60643 Implementation of an Ethics Program at a Large Environmental Laboratory
AWWA WQTC57030 A Large Team-Based Environmental Lab -- Seven Years Later
AWWA JAW34264 Journal AWWA — Getting the Most From a Contract Laboratory
CAN 2-38.7-M79-1979 Cotton coats for men (doctors and laboratory technicians)
SN-CEN/TS 17441:2020 Laboratory installations — Ventilation systems in laboratories
BS PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
DANSK DS/CEN/TS 17441:2020 Laboratory installations – Ventilation systems in laboratories
DANSK DS/ISO/TR 22869:2005 Medical laboratories – Guidance on laboratory implementation of ISO 15189:2003
TR 5202-2010 Standardization of LOINC Terminology in Australian Laboratories for Pathology Reporting
AWWA WQTC62457 Interlaboratory Validation of EPA Method 1103.1 (mTEC) for E. coli in Wastewater Effluent
AWWA WSC70018 Water Laboratory Alliance: A Focus on Laboratory Response
07/30164027 DC BS ISO 23909. Soil quality. Preparation of laboratory samples from large samples
CAN/CGSB-38.7-M90-1990 Cotton coats for men (surgeons and laboratory technicians)
BS 3202:1959 Recommendations on laboratory furniture & fittings
BS 914:1940 Laboratory porcelain
ASSP/AIHA Z9.5-2022 Laboratory Ventilation
CSA C22.2 No.151-1979 Laboratory Equipment
CSA C22.2 No.151-M1986-1986(R2004) Laboratory Equipment
AS 2982:1987 Laboratory construction
AWWA WQTC60640 Laboratory Ethics
CSA Z316.1-M1979-1979 Laboratory Water Baths
ASSP/AIHA Z9.11-2008 Laboratory Decommissioning
CSA C22.2 No.151-M1986-1986(C2004) Laboratory equipment
AWWA WQTC71356 Key Steps to Follow in Replacing a LIMS (Laboratory Information Management System) in Your Laboratory: A Case Study of a Water Quality Laboratory
AENOR UNE-ISO/TR 22869 IN:2007 Clinical laboratories. Guide for the implementation in laboratories of the ISO 15189:2003 Standard. (ISO/TR 22869:2005)
DANSK DS/ISO 22367:2020 Medical laboratories – Application of risk management to medical laboratories
DANSK DS/EN ISO 7787-1:2016 Dentistry – Laboratory cutters – Part 1: Steel laboratory cutters
CEI EN IEC 60477-1:2022 Laboratory resistors Part 1: Laboratory DC resistors
DANSK DS/EN 60477-2+A1:1998 Laboratory resistors – Part 2: Laboratory a.c. resistors
DANSK DS/EN IEC 60477-1:2022 Laboratory resistors – Part 1: Laboratory DC resistors
CEI EN IEC 60477-2:2022 Laboratory resistors Part 2: Laboratory AC resistors
DANSK DS/EN IEC 60477-2:2022 Laboratory resistors – Part 2: Laboratory AC resistors
ASTM Adjunct E691-01 Program to Compute the Within-Lab and Between-Lab Variation of a Test Method from an Interlaboratory Round Robin Study
DANSK DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods

German Institute for Standardization

DIN 12916:1995 Laboratory furniture - Large size tiles for laboratory bench tops
DIN CEN/TS 17441:2020-07 Laboratory installations - Ventilation systems in laboratories; German version CEN/TS 17441:2020
DIN 12915:1994-02 Laboratory furniture; sinks for laboratory benches
DIN EN ISO 15195:2004 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003); German version EN ISO 15195:2003
DIN 12785:1977 Laboratory glassware; special purpose laboratory thermometers
DIN 12918-1:1999 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN 12912:1977 Laboratory furniture; ceramic tiles for laboratory bench tops
DIN EN 60477-2:1999 Laboratory resistors - Part 2: Laboratory a.c. resistors (IEC 60477-2:1979 + A1:1997); German version EN 60477-2:1997 + A1:1997
DIN 12876-3:2001 Electrical laboratory devices - Laboratory circulators and baths - Part 3: Determination of ratings of laboratory baths
DIN 12918-2:2009-09 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN 12915:1994 Laboratory furniture; sinks for laboratory benches
DIN 12918-1:1999-05 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN 12918-2:2009 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN EN ISO 22367:2020-09 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020); German version EN ISO 22367:2020
DIN 12918-2:2002 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN 12876-3:2001-12 Electrical laboratory devices - Laboratory circulators and baths - Part 3: Determination of ratings of laboratory baths
DIN 30665-1:1982 Gas-appliances; gas-burners for laboratory use (laboratory burners)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE CH-99-13-4-1999 Commercial-Scale University HVAC Laboratory
ASHRAE HVAC APPLICATIONS IP CH 16-2015 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 14-2003 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 13-1999 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 14-2003 Laboratories
ASHRAE HVAC APPLICATIONS IP CH 16-2011 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 13-1999 Laboratories
ASHRAE HVAC APPLICATIONS SI CH 16-2015 LABORATORIES
ASHRAE HVAC APPLICATIONS SI CH 16-2011 LABORATORIES
ASHRAE HVAC APPLICATIONS IP CH 14-2007 Laboratories
ASHRAE HVAC APPLICATIONS SI CH 14-2007 Laboratories
ASHRAE CH-99-7-3-1999 Design Considerations of a Large Central Laboratory Exhaust
ASHRAE HVAC APPLICATIONS SI CH 13-1995 Laboratory Systems
ASHRAE HVAC APPLICATIONS IP CH 13-1995 Laboratory Systems
ASHRAE QC-06-057-2006 Infiltration Heat Recovery@ Part II- Laboratory Studies of Two Test Panel Geometries (RP-1169)
ASHRAE SE-99-7-1-1999 Floor-Supply Displacement Air-Conditioning: Laboratory Experiments

YU-JUS

JUS B.E4.105-1988 Laboratorf glassuare. Safety tube iritb two bulbs. Quality reguirements

GSO

GSO ISO 7056:2007 Plastics laboratory ware - Beakers
BH GSO ISO 23909:2016 Soil quality -- Preparation of laboratory samples from large samples
OS GSO ISO 23909:2013 Soil quality -- Preparation of laboratory samples from large samples
OS GSO ISO/TR 22869:2016 Medical laboratories -- Guidance on laboratory implementation of ISO 15189: 2003
GSO ISO/TR 22869:2016 Medical laboratories -- Guidance on laboratory implementation of ISO 15189: 2003
GSO ISO 23909:2013 Soil quality -- Preparation of laboratory samples from large samples
GSO ISO 15195:2012 Laboratory medicine -- Requirements for reference measurement laboratories
GSO 2145:2011 Laboratory Filter Papers
OS GSO 2145:2011 Laboratory Filter Papers
BH GSO 2145:2012 Laboratory Filter Papers
GSO IEC 60477-2:2015 Laboratory resistors. Part 2: Laboratory a.c. resistors
GSO ISO/TS 20612:2013 Water quality -- Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
OS GSO ISO/TS 20612:2013 Water quality -- Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
OS GSO IEC 60477-2:2015 Laboratory resistors. Part 2: Laboratory a.c. resistors
BH GSO IEC 60477-2:2016 Laboratory resistors. Part 2: Laboratory a.c. resistors

Association Francaise de Normalisation

NF X31-114*NF ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
XP X15-300*XP CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
XP CEN/TS 17441:2020 Laboratory installations - Laboratory ventilation systems
NF ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
NF S92-062:2004 Laboratory medicine - Requirements for reference measurement laboratories.
NF X15-211:2009 Installations de laboratoire - Sorbonnes à recirculation - Généralités, classification, prescriptions
NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
NF EN IEC 60477-2:2022 Laboratory resistors - Part 2: Alternating current laboratory resistors
NF B35-802:1972 Laboratory glassware. Laboratory crucibles (porcelain and silica).
NF EN IEC 60477-1:2022 Laboratory resistors - Part 1: DC laboratory resistors
NF S91-116-1*NF EN ISO 7787-1:2016 Dentistry - Laboratory cutters - Part 1 : steel laboratory cutters
NF S92-081*NF EN ISO 22367:2020 Medical laboratories - Application of risk management to medical laboratories

VN-TCVN

TCVN 5339-1991 Anti.Corrosive protection atmospherie laborator.General requirements

RU-GOST R

GOST 22733-2016 Soils. Laboratory method for determining of maximum density
GOST R ISO 23909-2013 Soil quality. Preparation of laboratory samples from large samples
GOST R ISO 15195-2006 Laboratory medicine. Requirements for reference measurement laboratories
GOST R 56698-2015 Methods of testing the chemicals of human hazard. Reproductive toxicity studies on two generations of laboratory animals
GOST IEC 60477-2-2013 Laboratory resistors. Part 2. Laboratory a.c. resistors
GOST R 53022.3-2008 Clinical laboratory technologies. Requirements of quality of clinical laboratory tests. Part 3. Assessment of laboratory tests clinical significance
GOST 12536-2014 Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution

HU-MSZT

MNOSZ 13960-1954 Thermometer for laboratory use. Sterilization thermometer (maximum)
MNOSZ 6624-1956 laboratory. water bath

GOST

GOST 22733-1977 Soils. A laboratory method for determining maximum density

American Society for Testing and Materials (ASTM)

ASTM D8334/D8334M-20 Standard Practice for Sampling of Cannabis/Hemp Post-Harvest Batches for Laboratory Analyses
ASTM E898-88(2005) Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
ASTM E2489-06 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM E2489-06e1 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM D8244-21 Standard Guide for Analytical Laboratory Operations Supporting the Cannabis/Hemp Industry
ASTM D8244-21a Standard Guide for Analytical Laboratory Operations Supporting the Cannabis/Hemp Industry
ASTM E2489-21 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM D8493-23 Standard Guide for Sample Preparation of Cannabis and Hemp Inflorescence for Laboratory Analysis
ASTM D8244-20 Standard Guide for Analytical Laboratory Operations Supporting the Cannabis Industry
ASTM D8347-21a Standard Guide for Requirements for Analytical Laboratory Related Professions Within the Cannabis and Hemp Industries
ASTM D8347-21 Standard Guide for Certification Requirements for Analytical Laboratory Professional Vocations Within the Cannabis Industry
ASTM E898-88(2000) Standard Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
ASTM E898-88(2013) Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
ASTM E832-81(2003) Standard Specification for Laboratory Filter Papers

International Organization for Standardization (ISO)

ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
ISO/TR 22869:2005 Medical laboratories - Guidance on laboratory implementation of ISO 15189:2003
ISO 7787-1:2016 Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters
ISO 22367:2020 Medical laboratories — Application of risk management to medical laboratories

British Standards Institution (BSI)

BS ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
PD CEN/TS 17441:2020 Laboratory installations. Ventilation systems in laboratories
BS EN IEC 60477-1:2022 Laboratory resistors. Laboratory DC resistors
BS EN ISO 7787-1:2016 Dentistry. Laboratory cutters. Steel laboratory cutters
BS EN IEC 60477-2:2022 Laboratory resistors. Laboratory AC resistors
BS EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories
BS EN 60477-2:1980 Laboratory resistors. Laboratory a.c. resistors
BS EN 60477-2:1999 Laboratory resistors - Laboratory a.c. resistors
BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods
BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods

Korean Agency for Technology and Standards (KATS)

KS I ISO 23909-2009(2019) Soil quality－Preparation of laboratory samples from large samples
KS I ISO 23909:2009 Soil quality－Preparation of laboratory samples from large samples
KS I ISO 23909-2023 Soil quality－Preparation of laboratory samples from large samples
KS P ISO TR 22869-2019 Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS P ISO TR 22869-2009(2019) Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS C IEC 60477-2023 Laboratory resistors－Laboratory d.c. resistors
KS C IEC 60477-2013(2018) Laboratory resistors－Laboratory d.c. resistors
KS P ISO 15195-2014(2019) Laboratory medicine — Requirements for reference measurement laboratories
KS P ISO 15195:2007 Laboratory medicine-Requirements for reference measurement laboratories
KS C IEC 60477:2013 Laboratory resistors－Laboratory d.c. resistors
KS P ISO 15195:2014 Laboratory medicine — Requirements for reference measurement laboratories
KS F 2312-2022 Test method for soil compaction in laboratory
KS F 2312-1986 Test method for soil compaction in laboratory
KS P ISO TR 22869:2009 Medical laboratories－Guidance on laboratory implementation of KS P ISO 15189：2006
KS C IEC 60477-2-2023 Laboratory resistors－Part 2：Laboratory a.c. resistors
KS C IEC 60477-2-2013(2018) Laboratory resistors－Part 2：Laboratory a.c. resistors
KS P ISO 22367-2023 Medical laboratories — Application of risk management to medical laboratories

European Committee for Standardization (CEN)

CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories
EN ISO 15195:2003 Laboratory medicine - Requirements for reference measurement laboratories (ISO 15195:2003)
DD ENV 13050-2000 Curtain Walling - Watertightness - Laboratory Test under Dynamic Condition of Air Pressure and Water Spray
EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
HD 249.2 S1-1981 Laboratory resistors; part 2: laboratory a.c. resistors

DIN

DIN CEN/TS 17441:2020 Laboratory installations - Ventilation systems in laboratories

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE APP IP CH 14-2007 Laboratories
ASHRAE APPLICATION IP CH 16-2011 LABORATORIES

GOSTR

GOST R ISO/TR 22869-2009 Medical laboratories. Quidance on laboratory implementation of ISO 15189:2003

KR-KS

KS I ISO 23909-2009(2023) Soil quality－Preparation of laboratory samples from large samples
KS C IEC 60477-2013(2023) Laboratory resistors－Laboratory d.c. resistors
KS C IEC 60477-2-2013(2023) Laboratory resistors－Part 2：Laboratory a.c. resistors

National Fire Protection Association (NFPA)

NFPA 99H CHAPTER 11-2002 Laboratories

CEN - European Committee for Standardization

EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures

CZ-CSN

CSN 67 3091-1983 Laboratory tests of resistance of paint coatings in atmospherical conditíons

TH-TISI

TIS 2277-2006 Laboratory medicine.requirements for reference measurement laboratories

RO-ASRO

STAS 7894-1967 Laboratory glass products. Common three-phase faucet sizes/dimensions

CU-NC

NC 26-212-1992 GOOD LABORATOY PRACTICES

US-HHS

HHS 21 CFR PART 58-2011 GOOD LABORATORY PRACTICE FOR NONCLINICAL LABORATORY STUDIES

SE-SIS

SIS SS 02 71 09-1989 Geotechnical tests — Compaction properties — Laboratory compaction

API - American Petroleum Institute

API PUBL 4362-1983 Inter- and Intralaboratory Variation In Conducting Static Acute Toxicity Tests with Daphnia Magna Exposed To Effluents and Reference Toxicants

Underwriters Laboratories (UL)

UL SUBJECT 1805-1993 Outline of Investigation for Laboratory Hoods and Cabinets Issue Number: 1
UL 1262-1990 Laboratory equipment
UL 3101-2-20-1997 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Laboratory Centrifuges First Edition

US-FCR

FCR VA 11 53 23-2011 LABORATORY REFRIGERATORS
FCR FED H-08-1 SEC 11602-1982 LABORATORY ACCESSORIES
FCR FED H-08-5 CHAP 240-1989 LABORATORY SERVICE
FCR FED H-08-1 SEC 12345-1982 LABORATORY FURNITURE
FCR FED H-08-9 CHAP 240-1986 LABORATORY SERVICE
FCR COE ER 70-1-6-1981 PRINCIPAL LABORATORY
FCR VA 11 53 13-2011 LABORATORY FUME HOODS
FCR FED H-08-5 CHAP 210-1989 CARDIOVASCULAR LABORATORIES

Defense Logistics Agency

DLA A-A-53071-1987 OVEN, LABORATORY

American National Standards Institute （ANSI)

ANSI/AIHA/ASSE Z9.5-2012 Laboratory Ventilation
ANSI/ASSE Z9.11-2016 Laboratory Decommissioning
ANSI/ASA S3.1-1999 Maximum Permissible Ambient Noise Levels for Audiometric Test Rooms

VDI - Verein Deutscher Ingenieure

VDI 2051-1978 Ventilation of laboratories

Indonesia Standards

SNI 19-2968-1992 Language laboratories
SNI 15-0575-1989 Laboratory glass
SNI 04-3584-1994 Electrical energy meters, Test room

European Committee for Electrotechnical Standardization（CENELEC）

HD 249.2-1981 Laboratory Resistors Part 2: Laboratory A.C. Resistors
EN IEC 60477-1:2022 Laboratory resistors - Part 1: Laboratory DC resistors

AT-ON

ONORM M 7632-1985 Ventilation of laboratories

International Electrotechnical Commission (IEC)

IEC 60477:1974/AMD1:1997 Amendment 1 - Laboratory resistors. Laboratory d.c. resistors
IEC 60477-2:2022 Laboratory resistors - Part 2: Laboratory AC resistors
IEC 60477-1:2022 Laboratory resistors - Part 1: Laboratory DC resistors

Danish Standards Foundation

DS/EN 60477-2+A1:1998 Laboratory resistors - Part 2: Laboratory a.c. resistors
DS/IEC 477-2:1981 Laboratory resistors. Part 2: Laboratory a.c. resistors

ES-UNE

UNE-EN IEC 60477-2:2022 Laboratory resistors - Part 2: Laboratory AC resistors (Endorsed by Asociación Española de Normalización in July of 2022.)
UNE-EN ISO 7787-1:2016 Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters (ISO 7787-1:2016)
UNE-EN ISO 22367:2020 Medical laboratories - Application of risk management to medical laboratories (ISO 22367:2020)
UNE-EN IEC 60477-1:2022 Laboratory resistors - Part 1: Laboratory DC resistors (Endorsed by Asociación Española de Normalización in July of 2022.)

Standard Association of Australia （SAA）

AS ISO 22367:2021 Medical laboratories — Application of risk management to medical laboratories

PL-PKN

PN B12331-1974 Porcelain laboratory cruciblles

US-VA

VA 11 53 13-2011 LABORATORY FUME HOODS

ES-AENOR

UNE 43-347-1987 Laboratory glass. cup

Others: Central laboratory and sub-laboratory,two laboratories,Agricultural Products Laboratory Laboratory,Central laboratory and field laboratory,Physical and chemical laboratory Analytical laboratory,Pengcheng Laboratory National Laboratory,Laboratory comparison laboratory proficiency testing,Central Laboratory and Testing Laboratory,two particle families,Laboratory Equipment Parameters Laboratory Equipment,two natural gas,Testing Laboratory Soil Laboratory,Bioanalytical Laboratory Central Laboratory,plant laboratory, laboratory samples,plant laboratory, laboratory sample laboratory sample,laboratory, reference laboratory,Central laboratory sub-laboratory,laboratory equipment instrument laboratory equipment,Intra-lab and inter-lab comparisons,Professional Laboratories and Laboratories