coupling mode

coupling mode, Total:162 items.

The international standard classification for "coupling mode" includes: Electroacoustics , Other electrical accessories , Plugs, socket-outlets, couplers , Occupational safety. Industrial hygiene , Shipbuilding and marine structures in general .

The Chinese standard classification for "coupling mode" includes: Acoustic Measurement , Technical management , Technical management , Technical management , Other electric appliances , Labor sanitation , Marine hydraulic/pneumatic elements and accessories .

Tianjin Provincial Standard of the People's Republic of China

DB12/T 1022-2020 Determination of Available Boron Content in Soil by Inductively Coupled Plasma Mass Spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 25498.5-2017 Electroacoustics--Simulators of human head and ear--Part 5: 2 cm3 coupler for the measurement of hearingaids and earphones coupled to the ear by means of ear inserts

Professional Standard - Electron

SJ/Z 9159-1987 Guide to dynamic measurements of piezoelectric ceramics with high electromechanical coupling
SJ 2638.6-1985 Cold press dies - Assembly of moving shank (push-in)
SJ 20642.5-1998 Semiconductor optoelectronic module - Detail specification for Type GH82 opto-couplers
SJ 20642.6-1998 Semiconductor optoelectronic module - Detail specification for Type GH83 opto-couplers
SJ 20465-1994 Orthogonal mode coupler of aluminum waveguide,Type BZS-100-1
SJ 20642.4-1998 Semiconductor optoelectronic module - Detail specification for Type GH81 opto-couplers

Group Standards of the People's Republic of China

T/CAMS /CICEIA18-2019 Reciprocating internal combustion engine- Fan coupler
T/CEC 406-2020 10kV~220kV dry type hollow high coupling split reactor technical specification
T/CES 057-2021 Test guide for dry-type air-core high coupled split reactors
T/CNS 81-2022 Simulation test method of proton induced displacement damage effects in charge-coupled device
T/ZZB 2205-2021 Stamping die spotting machines

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 25498.3-2010 Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry
GB/T 32517-2024 Installation couplers intended for permanent connection in fixed installations
GB/T 32517-2016 Installation couplers intended for permanent connection in fixed installations

Professional Standard - Aviation

HB 1973-1975 Typical combination of compound punching die with round die core, rectangular die base with rear guide column
HB 6828.5-1993 Typical Combination of Cold-punching Mould - Compound B-type Thick Female Die Typical Combination
HB 1984-1975 Typical combination of composite calendering die with rear guide column, rectangular formwork base, circular die core
HB 825-1966 Combined handle
HB 1975-1975 Typical combination of compound punching dies with symmetrical guide pillars, rectangular formwork bases, round die cores
HB 6828.7-1993 Typical Combination of Cold-punching Mould - Compound B-type Thin Female Die Typical Combination
HB 1974-1975 Typical combination of compound punching dies with diagonal guide pillars, rectangular formwork base, circular formwork core
HB 6828.4-1993 Typical Combination of Cold-punching Mould - Compound A-type Thick Female Die Typical Combination
HB 825-1975 Combined handle
HB 6828.6-1993 Typical Combination of Cold-punching Mould - Compound A-type Thin Female Die Typical Combination

Professional Standard - Machinery

JB/T 10521-2005 Appliance couplers for household and similar general purposes Particular requirements for couplers for appliances of heating liquids

Professional Standard - Construction Industry

JG/T 297-2010 Installation Couplers Intended for Permanent Connection in Fixed Installations

未注明发布机构

SAE AS 1655D-2024 COUPLING BODY, THREADLESS - FLEXIBLE, FIXED CAVITY, SELF-BONDING

Professional Standard - Railway

TB 1540.3-1984 Cold stamping die handle push-in movable die handle combination

National Health Commission of the People's Republic of China

GBZ/T 316.2-2018 Determination of lead in blood ——Part 2:Inductively coupled plasma mass spectrometry method

Professional Standard-Ships

CB/T 1136-1995 Hydraulic Coupler

Taiwan Provincial Standard of the People's Republic of China

CNS 14980-2-2-2007 Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment

Professional Standard - Military and Civilian Products

WJ 861-1997 Typical Combination of Cold Stamping Die Circular Duplex Die-Class I

British Standards Institution (BSI)

BS ISO 11001-3:2009 Agricultural wheeled tractors and implements - Three- point hitch couplers - Link coupler
BS ISO 11001-2:1993 Agricultural wheeled tractors and implements - Three-point hitched couplers - A-frame coupler
BS AU 267:1998 Code of practice for breakaway cables and secondary couplings
BS EN 60318-5:2006 Electroacoustics - Simulators of human head and ear - 2 cm 3 coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts
BS EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
BS EN 60318-3:2015 Electroacoustics. Simulators of human head and ear. Acoustic coupler for the calibration of supra-aural earphones used in audiometry
BS EN IEC 60318-8:2022 Electroacoustics. Simulators of human head and ear - Acoustic coupler for high-frequency measurements of hearing aids and earphones coupled to the ear by means of ear inserts

International Organization for Standardization (ISO)

ISO 11001-3:2009 Agricultural wheeled tractors and implements - Three-point hitch couplers - Part 3: Link coupler
ISO 23727:2009 Earth-moving machinery - Wheeled loader coupler for attachments

Association Francaise de Normalisation

NF U14-503*NF ISO 11001-3:2009 Agricultural wheeled tractors and implements - Three-point hitch couplers - Part 3 : link coupler.
NF EN IEC 60318-8:2022 Electroacoustics - Human head and ear simulators - Part 8: acoustic coupler for high frequency measurements of hearing aids and headphones coupled to the ear via eartips
NF T47-292*NF EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses

Korean Agency for Technology and Standards (KATS)

KS B ISO 11001-3:2002 Agricultural wheeled tractors and implements -- Three--point hitch couplers -- Part 3: Link coupler
KS B ISO 11001-3:2012 Agricultural wheeled tractors and implements－Three-point hitch couplers－Part 3：Link coupler
KS C IEC 60358:2003 Coupling capacitors and capacitor dividers
KS D 9201-2020 Coupling
KS B ISO 23727-2012(2022) Earth-moving machinery－Wheeled loader coupler for attachments
KS C IEC 60318-3-2022 Electroacoustics — Simulators of human head and ear — Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry
KS C IEC 60318-3:2017 Electroacoustics — Simulators of human head and ear — Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry
KS C IEC 60711-2007(2012) Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts
KS C IEC 60126:2001 IEC reference coupler for the measurement of hearing aids using earphones coupled to the ear by means of ear inserts

Spanish Association for Standardization (UNE)

UNE 10-027-1985 High voltage coupling. 600 model vertebral body equipment
UNE-EN 3567-004:2001 Aerospace series - In line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers - Product standard. (Endorsed by AENOR in April of 2002.)
UNE-EN 3567-003:2001 Aerospace series - In-line coulers for use in multiplex data bus systems in accordance with MIL-STD-1553B- Part 003: Single in-line couplers - Product standard. (Endorsed by AENOR in April of 2002.)

RU-GOST R

GOST 22703-2012 Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications
GOST 32885-2014 Automatic coupler model SA-3 and its components. Design and dimensions

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 3635-1993 Development of a Computational Model for a Ground-Coupled Heat Exchanger
ASHRAE KC-03-10-3-2003 Toward External Coupling of Building Energy and Airflow Modeling Programs
ASHRAE KC-03-10-2003 Symposium on Coupling of Building Airflow and Energy Modeling Programs
ASHRAE CH-03-9-1-2003 Whole Building Energy Simulation with a Three-Dimensional Ground-Coupled Heat Transfer Model
ASHRAE 4540-2002 Vilidation of Coupled Airflow and Heat Transfer Routines in a Building Simulation Tool

Defense Logistics Agency

DLA MIL-DTL-15370/18 C-2008 COUPLERS, DIRECTIONAL, (PIN PLUG-IN TERMINATION)
DLA MIL-DTL-15370/18 C NOTICE 1-2012 COUPLERS, DIRECTIONAL, (PIN PLUG-IN TERMINATION)
DLA SMD-5962-90855 REV D-2005 MICROCIRCUIT, HYBRID, HIGH SPEED SINGLE CHANNEL, OPTOCOUPLER
DLA MS3183 REV E VALID NOTICE 1-1991 COVER, PROTECTIVE, ELECTRIC CONNECTOR, RECEPTACLE, PUSH-PULL COUPLING
DLA MS3183 REV E NOTICE 2-1999 COVER, PROTECTIVE, ELECTRIC CONNECTOR, RECEPTACLE, PUSH-PULL COUPLING
DLA MS3183 REV E-1971 COVER, PROTECTIVE, ELECTRIC CONNECTOR, RECEPTACLE, PUSH-PULL COUPLING
DLA AN785 REV 7-2011 COUPLING, UNION, BRAZING
DLA MIL-DTL-26521 K-1999 HOSE ASSEMBLY, NONMETALLIC, FUEL, COLLAPSIBLE, LOW TEMPERATURE WITH NON-REUSABLE COUPLINGS
DLA MIL-DTL-26521 K (3)-2003 HOSE ASSEMBLY, NONMETALLIC, FUEL, COLLAPSIBLE, LOW TEMPERATURE WITH NON-REUSABLE COUPLINGS
DLA MS27496 REV H-2012 CONNECTORS, RECEPTACLE, ELECTRICAL, BOX MOUNTING, CRIMP TYPE, BAYONET COUPLING, SERIES I
DLA MS3182 REV D (1)-2000 COVER, PROTECTIVE, ELECTRIC CONNECTOR, PLUG, PUSH-PULL COUPLING
DLA MS3182 REV D-1971 COVER, PROTECTIVE, ELECTRIC CONNECTOR, PLUG, PUSH-PULL COUPLING
DLA MS3182 REV D NOTICE 2-1999 COVER, PROTECTIVE, ELECTRIC CONNECTOR, PLUG, PUSH-PULL COUPLING
DLA AN3068 REV 3 NOTICE 1-1998 COUPLING - ELECTRICAL CONDUIT
DLA AN3068 REV 3 VALID NOTICE 2-2003 COUPLING - ELECTRICAL CONDUIT
DLA SMD-5962-90854 REV H-2007 MICROCIRCUIT, HYBRID, LINEAR, SINGLE CHANNEL, OPTOCOUPLER, TRANSISTOR OUTPUT
DLA MS3116 REV D VALID NOTICE 1-1988 CONNECTORS, PLUG, ELECTRIC, SERIES 1, SOLDER TYPE, STRAIGHT, BAYONET COUPLING
DLA MS27335 REV E-2010 CONNECTORS, RECEPTACLE, ELECTRICAL, BOX, FLANGE MOUNT, SOLDER TYPE, BAYONET COUPLING, CLASS T, SERIES II
DLA AN3068 REV 3-1953 COUPLING - ELECTRICAL CONDUIT
DLA MS3116 REV D NOTICE 2-1998 CONNECTORS, PLUG, ELECTRIC, SERIES 1, SOLDER TYPE, STRAIGHT, BAYONET COUPLING
DLA MS90558 REV F-2009 CONNECTOR, PLUG, ELECTRICAL, WALL MOUNTING, (WITH COUPLING RING) CLASS L, (EQUIPMENT)
DLA MS3116 REV D-1976 CONNECTORS, PLUG, ELECTRIC, SERIES 1, SOLDER TYPE, STRAIGHT, BAYONET COUPLING

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications

ERC REPORT 101-1999 A Comparison of the Minimum Coupling Loss Method@ Enhanced Minimum Coupling Loss Method@ and the Monte-Carlo Simulation (Menton)

SCC

MIL MIL-DTL-15370/18C-2008 Couplers, Directional, (Pin Plug-In Termination)
06/30143306 DC ISO 11001-3. Agricultural wheeled tractors and implements. Three-point hitch couplers. Part 3. Link coupler
AWWA WQTC64159 Distribution System Modeling of Disinfection Byproduct (DBP) Formation: Coupling Hydraulic and Chemical Models
MIL MIL-DTL-15370/18B-2003 COUPLERS, DIRECTIONAL, (PIN PLUG-IN TERMINATION) (SUPERSEDING MIL-C-15370/18A)
MIL MIL-DTL-62478C-2010 Coupler, Optical
CEI EN 60318-3:2016 Electroacoustics - Simulators of human head and ear Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry
AWWA CSC91058 APIC-Piccolo Coupling
07/30171686 DC BS ISO 23727. Earth-moving machinery. Wheeled loader coupler for attachments
CSA C22.2 No.298-2016(R2021) High voltage couplers
CSA/ANSI C22.2 No.298-2021 High voltage couplers

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 424-1992 Coupling - Tube Flared Fitting, Female Thread (Rev. 3)

German Institute for Standardization

DIN EN 14422:2005 Clamp type coupling assemblies for LPG transfer hoses; German version EN 14422:2004
DIN EN 3567-004:2003-05 Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers; Product standard; German and English version EN 3567-004:2001 / Note: Applies in conjunction with DIN EN 356...

Conference of European Post Telecommunication (CEPT)

CEPT ERC REPORT 101-1999 A Comparison of the Minimum Coupling Loss Method, Enhanced Minimum Coupling Loss Method, and the Monte-Carlo Simulation (Menton)

AGMA - American Gear Manufacturers Association

14FTM08-2014 The Efficiency of a Simple Spur Gearbox - A Thermally Coupled Lubrication Model

American Gear Manufacturers Association

AGMA 14FTM08-2014 The Efficiency of a Simple Spur Gearbox - A Thermally Coupled Lubrication Model
AGMA 9009-D02-2002 Flexible Couplings - Nomenclature for Flexible Couplings

American National Standards Institute （ANSI)

ANSI/AGMA 9009-D-2002 Flexible Couplings - Nomenclature of Flexible Couplings
ANSI/INCITS/ISO/IEC 19757-11:2011 Information technology - Document Schema Definition Languages (DSDL) - Part 11: Schema association

European Committee for Electrotechnical Standardization（CENELEC）

HD 597 S1 CORR 1-1992 CORRIGENDUM Coupling Capacitors and Capacitor Dividers

Society of Automotive Engineers (SAE)

SAE AS4349-2015 COUPLING, TUBE
SAE AS4349-2007 COUPLING, TUBE
SAE AS5832-2013 ASSEMBLED COUPLING COMPONENTS, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING
SAE AS31371A-1998(R2003) Connector, plug, electric, solder type, push-pull coupling series 1(class E, pand j)
SAE AS81582-2006 Connectors, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, General Specification For
SAE AS1735C-1995(R2007) Nut, coupling, rigid, fixed cavity, threaded, ferrule type tube ends, typeII
SAE AS81582_A2-2007 Connectors, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, General Specification For
SAE AS1734C-1995(R2007) Nut, coupling, rigid, fixed cavity, threaded, ferrule type tube ends, typeI
SAE AS81582_A1-2004 Connectors, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, General Specification For
SAE AS38999/41A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Box Mounting Flange, Hermetic, Breech Coupling,...
SAE AS1712-1982 COUPLING SUB-ASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS
SAE AS1736D-2014 WASHER, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS
SAE AS1712B-1992 Coupling Sub-Assembly, Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends
SAE AS1712A-1984 COUPLING SUB-ASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS
SAE AS5831-2013 ASSEMBLED COUPLING, THREADLESS-FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, ENVELOPE DIMENSIONS
SAE AS38999/42A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Box Mounting Flange, Breech Coupling, Removable ...
SAE AS38999/40A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environmental Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Wall Mounting Flange, Breech Coupling, Removab...
SAE AS38999/49A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, in Line Cable, Breech Coupling, Removable Crimp ...
SAE AS31471A-2021 CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, PUSH-PULL, COUPLING, SERIES 2 (CLASS E AND J)
SAE AS1733F-2019 BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE II
SAE AS1733C-1993 BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE II
SAE AS1733-1984 BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE II
SAE AS1733D-2007 BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE II
SAE AS1733B-1991 BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE II
SAE J1772-2012 SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler
SAE AS1733A-1984 BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE II
SAE AS1733E-2015 BODY, COUPLING, RIGID, FIXED CAVITY, THREADED, FERRULE TYPE TUBE ENDS, TYPE II

CZ-CSN

CSN 36 8256-1966 Coupler
CSN ON 28 2671-1966 Mino Tubs. Couplor
CSN 389427-2003 Fire-fighting couplings
CSN 35 4508-1968 Appliance couplers

IN-BIS

IS 6789-1972 Specification for bolted fireproof cable couplers and adapters
IS 8898-1978 Clamp, Anastomosis, COOLEY Mode Specifications

United States Navy

NAVY QPL-21049-24 NOTICE 1-2001 COUPLING ASSEMBLIES, QUICK DISCONNECT, AIRCRAFT LIQUID OXYGEN SYSTEMS
NAVY QPL-81582-3 NOTICE 1-2009 Connectors, Electrical, Bayonet Coupling, Environmental Resisting, Umbilical, General Specification for

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 3567-004-1992 Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 004 - Double In-Line Couplers Product Standard (Edition P 1)

U.S. Military Regulations and Norms

ARMY MIL-DTL-62478 C-2010 COUPLER, OPTICAL
ARMY MIL-DTL-62478 B-1998 COUPLER, OPTICAL

HU-MSZT

MNOSZ 952-1950 mechanical coupling

International Electrotechnical Commission (IEC)

IEC 60711:1981 Occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts
IEC PAS 62170:2000 Bond wire modeling standard
IEC 60126:1973 IEC reference coupler for the measurement of hearing aids using earphones coupled to the ear by means of ear inserts

U.S. Air Force

AIR FORCE MIL-T-26561 C REINST NOTICE 2-2003 TESTER, TYPE MA-2 RECEPTION COUPLING BREAK-AWAY FORCE, PORTABLE
AIR FORCE MIL-T-26561 C-1984 TESTER, TYPE MA-2 RECEPTION COUPLING BREAK-AWAY FORCE, PORTABLE

BR-ABNT

ABNT PB-697-1980 coupling controller

ZA-SANS

VC 8012-1998 Appliance couplers

(U.S.) Telecommunications Industries Association

TIA-526-2-1989 OFSTP-2 Effective Transmitter Output Power Coupled Into Single-Mode Fiber Optic Cable ANSI APPROVAL WITHDRAWN FEBRUARY 2004

GM Europe

GME B 440 1014-1981 Coupling Fluid (German)

GSO

GSO ISO 8224-2:2013 Traveller irrigation machines -- Part 2: Softwall hose and couplings -- Test methods

SAE - SAE International

SAE AS31471-2004 CONNECTOR@ PLUG@ ELECTRIC@ CRIMP TYPE@ PUSH-PULL COUPLING@ SERIES 2 (CLASS E AND J)
SAE AS31471A-2011 CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, PUSH-PULL, COUPLING, SERIES 2 (CLASS E AND J)

Standard Association of Australia （SAA）

AS 1300:1973 Electrical equipment for coal mines - Bolted flameproof cable coupling devices

SE-SIS

SIS SMS 2496-1969 Fire fighting equipment. Hose coupling 110 for pressure hose. Coupling part

ESDU - Engineering Sciences Data Unit

ESDU 15010-2016 Coupling loss factors