The thermal resolver uses

The thermal resolver uses, Total:135 items.

The international standard classification for "The thermal resolver uses" includes: Medical equipment .

The Chinese standard classification for "The thermal resolver uses" includes: Petroleum geology exploration , Extracorporeal circulation, artificial organ and prosthesis device .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 18602-2012 Rock pyrolysis analysis
GB/T 18602-2001 Rock pyrolysis analysis

Professional Standard - Petroleum

SY/T 6188-1996 Analytical Method of Rock Pyrolysis by Gas Chromatography
SY/T 6188-2016 Analysis method for rock pyrolysis gas chromatography
SY/T 5117-1996 Rock pyrolysis analysis method

Taiwan Provincial Standard of the People's Republic of China

CNS 9799-2001 Stress and fatigue analyses for pressure vessels

Professional Standard - Nuclear Industry

EJ/T 596-1991 Dissolved Oxygen Analyzer

中国石油天然气总公司

SY/T 6015-1994 Oil and gas display analyzer rock pyrolysis analysis method

Group Standards of the People's Republic of China

T/CIET 609-2024 Specification for use of iridium-based catalysts for oxygen evolution at the anode of PEM electrolyzers
T/FJAS 017-2022 Hydrochloric acid for deep resolution

国家能源局

SY/T 7661-2022 Method for pyrolysis of oil content in shale

未注明发布机构

KS C IEC 60599-2024 Mineral oil-filled electrical equipment in service — Guidance on the interpretation of dissolved and free gases analysis

国家药监局

YY/T 1760-2021 Disposable drainage system for peritoneal dialysis

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE LV-11-C001-2011 New Analytical and Numerical Solutions for the Short-term Analysis of Vertical Ground Heat Exchangers
ASHRAE CH-99-13-2-1999 Teaching the Design of Thermal Systems Using Equation Solvers
ASHRAE AT-96-18-1-1996 Disaggregating Residential Hot Water Use
ASHRAE CH-95-23-1995 Heat Exchanger Design and Analysis Using Alternative Refrigerants
ASHRAE SF-98-31-2-1998 Disaggregating Residential Hot Water Use - Part II
ASHRAE 4323-2000 Comparison of Binary Mixture Heat and Mass Transfer Analysis with Single-Component Heat and Mass Transfer Analysis in the Design of GAX Absorber/Desorber
ASHRAE SF-98-9-5-1998 Analytical Model for the Design of In-Slab Electric Heating Panels
ASHRAE 4712-2004 Performance Analysis of Low-pressure Household Water Heaters

BE-NBN

NBN T 03-254-1980 Liquid chlorine for industrial use - Determination of water content using an electrolytic analyser

International Organization for Standardization (ISO)

ISO/FDIS 7933 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 7933:2023 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO/DIS 7730 Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ISO 248-2:2012 Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO/DIS 2620:2023 Analysis of natural gas — Biomethane — Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors

HU-MSZT

MNOSZ 11291-1952 Thermal element resolution
MSZ 11596-1983 Resolution (2) Mineral water, analytical function
MSZ 7363-1959 Potassium for analytical purposes

German Institute for Standardization

DIN EN ISO 7933 E:2002-12 Thermal Environmental Ergonomics Determining and Interpreting Thermal Stress Analytically Using Predicted Thermal Strain Models (Draft)
DIN 51006:2005 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
DIN 51006:1990 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
DIN EN ISO 7933:2018 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using the predicted heat strain model (ISO/DIS 7933:2018); German and English version prEN ISO 7933:2018
DIN EN ISO 7933:2021-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/DIS 7933.2:2021); German and English version prEN ISO 7933:2021 / Note: Date of issue 2021-10-29*Inte...
DIN EN ISO 7933:2004-12 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004); German version EN ISO 7933:2004 / Note: To be replaced by DIN EN ISO 7933 (2018-05), DIN ...
DIN EN ISO 7933:2024-03 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2023); German version EN ISO 7933:2023
DIN 53436-2:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN EN ISO 7730:2023-04 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023); German and English version prEN ISO 7730:2023 / ...
DIN EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); English version of DIN EN ISO 7730:2006-05
DIN EN ISO 7730 Berichtigung 1:2007-06 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); German version EN ISO 7730:2005, Corrigenda to DIN E...
DIN EN ISO 7730:2006-05 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005); German version EN ISO 7730:2005
DIN 53436-4:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids / Note: Applies in conjunction with DIN 53436-1 (2015-12), DIN 53436-2 (2015-12).
DIN 53436-4 E:2015-03 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids
DIN 53436-2:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN EN ISO 7730:2023 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023); German and English version prEN ISO 7730:2023

Danish Standards Foundation

DS/EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
DS/EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
DS/EN 60599:1999 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis
DS/EN 60599/A1:2007 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis

British Standards Institution (BSI)

BS EN ISO 7933:2004 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN ISO 7933:2023 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
18/30312137 DC BS EN ISO 7933. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
21/30436560 DC BS EN ISO 7933.2. Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
BS EN 12515:1997 Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified
BS EN ISO 7730:2005(2006) Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
BS EN IEC 60599:2022 Mineral oil-filled electrical equipment in service. Guidance on the interpretation of dissolved and free gases analysis
20/30412800 DC BS EN 60599. Mineral oil-filled electrical equipment in service. Guidance on the interpretation of dissolved and free gases analysis

SCC

DANSK DS/EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
NS-EN 12515:1997 Hot environments - Analytical determination and interpretation of thermal stress using calculation of required sweat rate (ISO 7933:1989 modified)
DIN EN ISO 7933 E:2018 Draft Document - Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using the predicted heat strain model (ISO/DIS 7933:2018); German and English version prEN ISO 7933:2018
AENOR UNE-EN ISO 7933:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
NS-EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
DANSK DS/EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
AWWA WQTC55146 The Use of Pyrolysis GC/MS as a Single Analytical Tool for the Structural Characterization of NOM and the Identification of DBP Precursor Sites
CAN/CSA-Z364.1.3-1998(R2014) Reuse of Haemodialysers
CAN/CSA Z364.1.3-1998(R2014) Reuse of Haemodialysers
CAN/CSA-Z364.1.3-1998(C2014) Reuse of hemodialyzers
CEI EN 60599:2016 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
NS-EN ISO 7730:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005)
DANSK DS/EN 60599:2016 Mineral oil-filled electrical equipment in service – Guidance on the interpretation of dissolved and free gases analysis
AENOR UNE-EN 60599:2016 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
DANSK DS/EN IEC 60599:2022 Mineral oil-filled electrical equipment in service – Guidance on the interpretation of dissolved and free gases analysis
DIN 53436-2 E:2015 Draft Document - Generation of thermal decomposition products from materials for their analytic- toxicological testing - Part 2: Thermal decomposition method
CEI EN IEC 60599:2023 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
BS 2883-1:1957 Domestic instantaneous and storage water heaters for use with liquefied petroleum gases. Water heaters for use with butane gas
DIN 53436-4 E:2015 Draft Document - Generation of thermal decomposition products from materials for their analytic- toxicological testing - Part 4: Thermal decomposition method for liquids

GOSTR

GOST R 57794-2017 Ergonomics of the thermal environment. Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

European Committee for Standardization (CEN)

EN ISO 7933:2023 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2023)
EN 12515:1997 Hot Environments - Analytical Determination and Interpretation of Thermal Stress Using Calculation of Required Sweat Rate ISO 7933: 1989 Modified
FprEN ISO 7933 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO/FDIS 7933:2023)
FprEN ISO 2620 Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO/FDIS 2620:2024)
prEN ISO 7730 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO/DIS 7730:2023)

American Society for Testing and Materials (ASTM)

ASTM E1641-13 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1131-98 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM RR-E37-1021 1997 E1641-Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E3007-15 Standard Practice for Kinetic Values Used to Evaluate the Study of Decomposition Reactions by Thermogravimetry
ASTM E1641-18 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1131-08(2014) Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1131-03 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1641-04 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-07 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E3007-21 Standard Practice for Selection and Use of Kinetic Reference Values in the Study of Decomposition Reactions by Thermogravimetry
ASTM RR-E37-1044 2015 E3007-Standard Practice for Selection and Use of Kinetic Reference Values in the Study of Decomposition Reactions by Thermogravimetry
ASTM E3296-22 Standard Guide for Using Pyrolysis Gas Chromatography and Pyrolysis Gas Chromatography-Mass Spectrometry in Forensic Polymer Examinations
A-A-54409 NOT 1-2012 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54923-1993 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A 59377B-2016 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-59410A-2015 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55220-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-59163A-2010 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409-1991 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-99 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55281-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry

Spanish Association for Standardization (UNE)

UNE-EN ISO 7933:2005 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
UNE-EN IEC 60599:2023 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
UNE-EN 60599:2016 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis
UNE-EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005)

Lithuanian Standards Office

LST EN ISO 7933:2004 Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004)
LST EN ISO 7730:2006 Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005)
LST EN 60599-2001 Mineral oil-impregnated electrical equipment in service. Guide to the interpretation of dissolved and free gases analysis (IEC 60599:1999)

IETF - Internet Engineering Task Force

RFC 5928-2010 Traversal Using Relays around NAT (TURN) Resolution Mechanism
RFC 3225-2001 Indicating Resolver Support of DNSSEC

Association Francaise de Normalisation

NF T90-129*NF EN ISO 15680:2004 Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption.
NF EN 16900:2018 Fast pyrolysis oils for boiler applications - Specifications and analysis methods
NF T70-538:2003 Energetic materials for defense - Safety, vulnerability - Compatibility by thermo-gravimetric analysis
NF T20-243:1982 Liquid chlorine for industrial use. Determination of water content using an electrolytic analyser.
NF EN IEC 60599:2022 Electrical equipment filled with mineral oil in service - Recommendations for the interpretation of dissolved gas and free gas analysis

SAE - SAE International

SAE ARP826A-2017 Electrical Computing Resolvers

Society of Automotive Engineers (SAE)

SAE ARP826-2010 ELECTRICAL COMPUTING RESOLVERS

YU-JUS

JUS IEC 599:1994 Interpretation of the analysis of gases in transformers and other oil-filled electrical equipment in service

NATO - North Atlantic Treaty Organization

STANAG 4515-2015 EXPLOSIVES. THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA). DIFFERENTIAL SCANNING CALORIMETRY (DSC)@ HEAT FLOW CALORIMETRY (HFC)@ AND THERMOGRAVIMETRIC ANALYSIS (TGA) (ED 2)

RU-GOST R

GOST R ISO 7730-2009 Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

U.S. Military Regulations and Norms

ARMY UFGS-02 53 16-2010 REMEDIATION OF CONTAMINATED SOILS BY THERMAL DESORPTION

(U.S.) Ford Automotive Standards

FORD FLTM EU-AZ 053-01-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS
FORD FLTM EU-AZ 053-1-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C57.130-2015 Guide for the Use of Dissolved Gas Analysis Applied to Factory Temperature Rise Tests for the Evaluation of Mineral Oil-Immersed Transformers and Reactors

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C57.130-2015 Guide for the Use of Dissolved Gas Analysis Applied to Factory Temperature Rise Tests for the Evaluation of Mineral Oil-Immersed Transformers and Reactors

US-FCR

FCR COE ETN 77-5-1977 UTILIZATION OF ENERGY-SAVING WATER HEATERS

American National Standards Institute （ANSI)

ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)

Korean Agency for Technology and Standards (KATS)

KS A ISO 7933-2005(2021) Ergonomics of the thermal environment－Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

DIN

DIN EN 60599:1999 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (IEC 60599:1999); German version EN 60599:1999

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0370-7-2016 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis (IEC 60599:2015); German version EN 60599:2016