Emission source analysis

Emission source analysis, Total:263 items.

The international standard classification for "Emission source analysis" includes: Reactor engineering , Environmental protection .

The Chinese standard classification for "Emission source analysis" includes: Nuclear facilities radiation safety , Basic standards and general methods .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 13976-2021 Radioactive source term of pressurized water reactor nuclear power plant for operation states

Group Standards of the People's Republic of China

T/CICEIA /CAMS45-2022 Space-Ground-Vehicle-People integration(SGVP)-Mobile source emission monitoring system -Mobile source emission monitoring system management platform technical specifications
T/NBSES 001-2024 VOCs/odor emission source classification guide
T/CSTM 00994-2024 Calculation standards and analysis methods for carbon emissions of industrial buildings
T/CSTM 00927-2023 Carbon emission calculation standard and analysis method for prefabricated buildings
T/JNM 0002-2024 Calibration Method for Portable Carbon Emission Analyzer

Professional Standard - Environmental Protection

HJ 1228-2021 Technical guideline for the development of national mobile source air pollutant emission standards
HJ 945.1-2018 Technical guideline for the development of national air pollutant emission standards

Professional Standard - Urban Construction

CJ/T 368-2011 Classification of municipal solid waste generated source and discharge
CJ/T 3033-1996 Classification of urban refuse generation source and refuse removal

Beijing Provincial Standard of the People's Republic of China

DB11/T 1539-2018 Carbon Emission Management Standards for Shopping Malls and Supermarkets

Professional Standard - Nuclear Industry

EJ/T 767-1993 X-ray fluorescence analyzer excited by radioactive sources

中华人民共和国环境保护部

GB/T 15562.1-1995 Graphical signs for environmental protection discharge outlet (source)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 15562.1-1995 Graphical signs for environmental protection - Discharge outlet (source)

Professional Standard - Agriculture

空气和废气监测分析方法 5.5.7-2003 Part Five Pollution Source Monitoring Chapter Five Continuous Monitoring of Flue Gas Pollutant Emission Seven Calculation of Emission Concentration and Total Emission
空气和废气监测分析方法 5.1.4-2003 Chapter 5 Pollution Source Monitoring Chapter 1 Sampling 4 Emission Concentration Calculation of Emissions

未注明发布机构

DIN CEN/TR 17078:2017*DIN SPEC 33978:2017 Stationary source emissions - Guidance on the application of EN ISO 16911-1
DIN EN 14792 E:2014-12 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
DIN EN 14792 E:2003-12 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
DIN EN 13725 E:2019-07 Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate
DIN EN 13725 E:2000-01 Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate

Hebei Provincial Standard of the People's Republic of China

DB13/ 487-2002 Carbon Monoxide Emission Standards for Stationary Pollution Sources

API - American Petroleum Institute

API PUBL 4750-2008 Cyanide Discharges in the Petroleum Industry: Sources and Analysis
API REPORT 3-1976 Oil Analysis in Production Discharges
API PUBL 4637-1996 Analysis of Causes of Failure in High Emitting Cars
API PUBL 344-1998 Critical Review of Source Sampling and Analysis Methodologies for Characterizing Organic Aerosol and Fine Particulate Source Emission Profiles
API PUBL 4195-1973 A TECHNICAL ANALYSIS OF FUEL ECONOMY AND EMISSION CONTROL
API PUBL 4772-2008 Measuring Particulate Emissions from Combustion Sources
API RS 74-1994 AIR EMISSIONS BANKING AND TRADING: ANALYSIS AND IMPLICATIONS FOR WETLAND MITIGATION BANKING
API DR 140-1992 Global Emissions of Methane from Petroleum Sources
API PUBL 4635-1996 Compilation of Field Analytical Methods for Assessing Petroleum Product Releases

International Organization for Standardization (ISO)

ISO 19694-7:2024 Stationary source emissions
ISO 19694-4:2023 Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 4: Aluminium industry
ISO 19694-3:2023 Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 3: Cement industry
ISO 19694-1:2021 Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 1: General aspects
ISO 19694-5:2023 Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 5: Lime industry
ISO 19694-6:2023 Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 6: Ferroalloys and silicon industry
ISO/FDIS 19694-7:2023 Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 7: Semiconductor and display industries
ISO 10397:1993 Stationary source emissions; determination of asbestos plant emissions; method by fibre count measurement
ISO 18466:2016 Stationary source emissions - Determination of the biogenic fraction in CO2 in stack gas using the balance method

Association Francaise de Normalisation

FD X43-319:2010 Emissions from stationary sources - Guide to sampling and analysis of volatile organic compounds
NF EN 19694-4:2016 Emissions from stationary sources - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 4: aluminum industry
NF X30-700-2*NF EN 19694-2:2016 Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2 : iron and steel industry
NF X43-329:2003 Émissions de sources fixes - Prélèvement et mesurage d'hydrocarbures aromatiques polycycliques à l'émission
NF EN 17656:2022 Emissions from stationary sources - Requirements for proficiency testing programs for emissions measurements
NF EN 19694-1:2016 Emissions from stationary sources - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: general aspects
NF EN 19694-3:2016 Emissions from stationary sources - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: cement industry
NF EN 19694-2:2016 Emissions from stationary sources - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 2: steel industry
NF X30-700-4*NF EN 19694-4:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 4 : aluminium industry
NF EN 19694-5:2016 Emissions from stationary sources - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: lime industry
NF X30-700-3*NF EN 19694-3:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry
NF X30-700-1*NF EN 19694-1:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1 : general aspects
NF EN 19694-6:2016 Emissions from stationary sources - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: ferroalloys industry
NF X30-700-5*NF EN 19694-5:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5 : lime industry
NF X30-700-6*NF EN 19694-6:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: ferroalloy industry
BP X43-555:2012 Emissions from stationary sources - Good practice guide for measuring diffuse emissions in the petrochemical sector
NF X43-550:1999 Air quality - Emissions from fixed sources - Expression of results from measurements of emissions from industrial installations
NF X43-303:2011 Stationary source emissions - Determination of ammonia (NH3).
XP X43-420:2011 Emissions from stationary sources - Quality assurance of PEMS (Predictive Atmospheric Emissions Monitoring System)
NF EN 13725:2022 Emissions from fixed sources - Determination of odor concentration by dynamic olfactometry and odor emission rate
GA X43-138:2014 Stationary source emissions - Diffuse emissions at skylights - Recommendations for the implementation of the measurement method
NF X43-327*NF EN 13725:2022 Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate
NF X43-324-4/IN1*NF EN 1948-4/IN1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
XP X43-362:2004 Stationary source emissions - Qualification and monitoring of AMS
NF EN 14385:2004 Emissions from stationary sources - Determination of total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
FD X43-313*FD CEN/TR 17078:2017 Stationary source emissions - Guidance on the application of EN ISO 16911-1
XP X43-137:2018 Emissions from stationary sources - Determination of free cyanides
NF ISO 10396:2007 Emissions from Stationary Sources - Sampling for automated determination of gas emission concentrations for stationary monitoring systems

British Standards Institution (BSI)

BS EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
BS EN 17656:2022 Stationary source emissions. Requirements on proficiency testing schemes for emission measurements
21/30433224 DC BS ISO 19694-5. Stationary source emissions. Determination of greenhouse gas emissions in energy-intensive industries - Part 5. Lime industry
21/30433218 DC BS ISO 19694-3. Stationary source emissions. Determination of greenhouse gas emissions in energy-intensive industries - Part 3. Cement industry
21/30427433 DC BS EN 17656. Stationary source emissions. Requirements on proficiency testing schemes for emission measurements
21/30433227 DC BS ISO 19694-6. Stationary source emissions. Determination of greenhouse gas emissions in energy-intensive industries - Part 6. Ferroalloy industry
21/30433221 DC BS ISO 19694-4. Stationary source emissions. Determination of greenhouse gas emissions in energy-intensive industries - Part 4. Aluminium industry
BS EN 19694-2:2016 Stationary source emissions. Greenhouse Gas (GHG) emissions in energy-intensive industries. Iron and steel industry
20/30399826 DC BS ISO 19694-1. Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1. General aspects
BS ISO 19694-7:2024 Stationary source emissions. Determination of greenhouse gas emissions in energy-intensive industries - Semiconductor and display industries
BS EN 19694-1:2016 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries. General aspects
BS EN 14385:2004(2008) Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
BS EN 19694-5:2016 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries. Lime industry
BS EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
BS PD CEN/TS 17198:2018 Stationary source emissions. Predictive Emission Monitoring Systems (PEMS). Applicability, execution and quality assurance
BS EN 19694-4:2016 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries. Aluminium industry
BS EN 19694-3:2016 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries. Cement industry
BS EN 1948-4:2010+A1:2013 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs
22/30405421 DC BS ISO 19694-7. Stationary source emissions. Determination of greenhouse gas emissions in energy-intensive industries - Part 7. Semiconductor and display industries
BS PD CEN/TR 17078:2017 Stationary source emissions. Guidance on the application of EN ISO 16911-1
19/30382405 DC BS EN 13725. Stationary source emissions. Determination of odour concentration by dynamic olfactometry and odour emission rate from stationary sources
BS EN 19694-6:2016 Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries. Ferroalloy industry
BS ISO 18466:2016 Stationary source emissions. Determination of the biogenic fraction in C O2 in stack gas using the balance method
BS DD CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling and analysis of dioxin-like PCBs

SCC

NS 9808:1995 Air analysis - Sampling of emission from stationary sources for the determination of polycyclic aromatic hydrocarbons (PAH)
DANSK DS/EN 19694-2:2016 Stationary source emissions – Greenhouse Gas (GHG) emissions in energy-intensive industries – Part 2: Iron and steel industry
AENOR UNE-EN 19694-2:2018 Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2: Iron and steel industry
NS-EN 19694-2:2016 Stationary source emissions — Greenhouse Gas (GHG) emissions in energy-intensive industries — Part 2: Iron and steel industry
DANSK DS/ISO 19694-1:2021 Stationary source emissions – Determination of greenhouse gas emissions in energy-intensive industries – Part 1: General aspects
DANSK DS/EN 19694-4:2016 Stationary source emissions – Determination of greenhouse gas (GHG) emissions in energy-intensive industries – Part 4: Aluminium industry
AENOR UNE-EN 19694-4:2018 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 4: Aluminium industry
NS-EN 19694-4:2016 Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 4: Aluminium industry
DANSK DS/EN 17656:2022 Stationary source emissions – Requirements on proficiency testing schemes for emission measurements
AENOR UNE-EN 19694-3:2018 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry
DANSK DS/EN 19694-5:2016 Stationary source emissions – Determination of greenhouse gas (GHG) emissions in energy-intensive industries – Part 5: Lime industry
DANSK DS/EN 19694-3:2016 Stationary source emissions – Determination of greenhouse gas (GHG) emissions in energy-intensive industries – Part 3: Cement industry
NS-EN 19694-5:2016 Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 5: Lime industry
BS EN 1911-3:1998 Stationary source emissions. Manual method of determination of HCI-Absorption solutions analysis and calculation
NS-EN 19694-3:2016 Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 3: Cement industry
DANSK DS/EN 19694-6:2016 Stationary source emissions – Determination of greenhouse gas (GHG) emissions in energy-intensive industries – Part 6: Ferroalloy industry
DANSK DS/EN 19694-1:2016 Stationary source emissions – Determination of greenhouse gas (GHG) emissions in energy-intensive industries – Part 1: General aspects
AENOR UNE-EN 19694-5:2018 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: Lime industry
AENOR UNE-EN 19694-6:2018 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Ferroalloy industry
NS-EN 17656:2022 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
NS-EN 19694-1:2016 Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 1: General aspects
NS-EN 19694-6:2016 Stationary source emissions — Determination of greenhouse gas (GHG) emissions in energy-intensive industries — Part 6: Ferroalloy industry
AENOR UNE-EN 19694-1:2018 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects
VDI 4285 BLATT 3-2015 Metrological determination of emissions from diffuse sources — Quantification of diffuse particulate matter emissions from industrial plants including agricultural sources
DANSK DS/ISO 19694-6:2023 Stationary source emissions – Determination of greenhouse gas emissions in energy-intensive industries – Part 6: Ferroalloys and silicon industry
UNE-EN 1911-3:1998 STATIONARY SOURCE EMISSIONS. MANUAL METHOD OF DETERMINATION OF HCL. PART 3: ABSORPTION SOLUTIONS ANALYSIS AND CALCULATION.
NS-EN 1911-3:1998 Stationary source emissions — Manual method of determination of HCl — Part 3: Absorption solutions analysis and calculation
DANSK DS/CEN/TS 16429:2013 Stationary source emissions – Sampling and determination of hydrogen chloride content in ducts and stacks – Infrared analytical technique
SN-CEN/TS 16429:2013 Stationary source emissions — Sampling and determination of hydrogen chloride content in ducts and stacks — Infrared analytical technique
DIN EN ISO 19694-1 E:2014 Draft Document - Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects (ISO/DIS 19694-1:2014); German version prEN ISO 19694-1:2014
BS PD CEN/TS 16429:2013 Stationary source emissions. Sampling and determination of hydrogen chloride content in ducts and stacks. Infrared analytical technique
NS 9813:1995 Air analysis - Clean up procedure for samples from emission measurements of stationary sources for the determination of polycyclic aromatic hydrocarbons (PAH)
DIN EN ISO 19694-2 E:2014 Draft Document - Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2: Iron and steel industry (ISO/DIS 19694-2:2014); German version prEN ISO 19694-2:2014
DIN EN ISO 19694-4 E:2014 Draft Document - Stationary source emissions - Determination of Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 4: Aluminium industry (ISO/DIS 19694-4:2014); German version prEN ISO 19694-4:2014
SN-CEN/TR 15983:2010 Stationary source emissions — Guidance on the application of EN 14181:2004
DIN EN ISO 19694-3 E:2014 Draft Document - Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry (ISO/DIS 19694-3:2014); German version prEN ISO 19694-3:2014
SN-CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance
DIN EN ISO 19694-5 E:2014 Draft Document - Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: Lime industry (ISO/DIS 19694-5:2014); German version prEN ISO 19694-5:2014
VDI 4660 BLATT 2-2017 Determination of target energy-related emissions during energy conversion
NS-EN 14385:2004 Stationary source emissions — Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
DIN EN 13725 E:2019 Draft Document - Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate from stationary sources; German and English version prEN 13725:2019
DIN EN ISO 19694-6 E:2014 Draft Document - Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Ferroalloy industry (ISO/DIS 19694-6:2014); German version prEN ISO 19694-6:2014
AWWA ACE68633 Energy Savings and Greenhouse Gas Reductions
DANSK DS/CEN/TS 17198:2018 Stationary source emissions – Predictive Emission Monitoring Systems (PEMS) – Applicability, execution and quality assurance
DANSK DS/CEN/TR 17078:2017 Stationary source emissions – Guidance on the application of EN ISO 16911-1
SN-CEN/TR 17078:2017 Stationary source emissions — Guidance on the application of EN ISO 16911-1
DANSK DS/EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V

Indonesia Standards

SNI 19-7117.4-2005 Exhaust gas emissions - Stationary sources - Part 4: Test methods of fume content by gravimetry
SNI 19-7117.1-2005 Exhaust gas emissions - Stationary sources - Part 1: Determination of flow speed rates
SNI 01-7206-2006 Emission tests of formaldehyde of wood panels by gas analysis methods
SNI 7117.20-2009 Exhaust Emission Stationary Sources Section 20:: Testing
SNI 19-7117.15-2009 Exhaust Emissions - Stationary Sources - Section 15: Determination of Dry Molecular Weight
SNI 7117.14-2009 Exhaust Emissions—Stationary Sources—Part 14: Determination of Linear Velocity

ES-UNE

UNE-EN 19694-2:2018 Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2: Iron and steel industry
UNE-EN 19694-4:2018 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 4: Aluminium industry
UNE-EN 17656:2023 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
UNE-EN 19694-3:2018 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry
UNE-EN 19694-6:2018 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Ferroalloy industry
UNE-EN 19694-5:2018 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: Lime industry
UNE-EN 19694-1:2018 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects
UNE-EN 13725:2022 Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate
UNE-CEN/TR 17078:2017 Stationary source emissions - Guidance on the application of EN ISO 16911-1 (Endorsed by Asociación Española de Normalización in May of 2017.)

GOST

GOST R 71099-2023 Stationary source emissions. Determination of Greenhouse Gas emissions in energy intensive industries. Part 4. Aluminium industry
GOST R 71098-2023 Stationary source emissions. Determination of greenhouse gas emissions in energy intensive industries. Part 3. Cement industry
GOST R 71100-2023 Stationary source emissions. Determination of greenhouse gas emissions in energy intensive industries. Part 5. Lime industry
GOST R 71097-2023 Stationary source emissions. Determination of greenhouse gas emissions in energy intensive industries. Part 2. Iron and steel industry
GOST R ISO 19694-1-2022 Stationary source emissions. Determination of greenhouse gas emissions in energy-intensive industries. Part 1. General aspects
GOST R 71101-2023 Stationary source emissions. Determination of greenhouse gas emissions in energy intensive industries. Part 6. Ferroalloys and silicon industry

German Institute for Standardization

DIN EN 19694-2:2016-10 Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2: Iron and steel industry; German version EN 19694-2:2016 / Note: Applies in conjunction with DIN EN 19694-1 (2016-10).
DIN ISO 19694-4:2021-05 Stationary source emissions - Determination of greenhouse gas emissions in energy-intensive industries - Part 4: Aluminium industry (ISO/DIS 19694-4:2021); Text in German and English / Note: Date of issue 2021-04-09
DIN EN 19694-4:2016-10 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 4: Aluminium industry; German version EN 19694-4:2016
DIN ISO 19694-5:2021-05 Stationary source emissions - Determination of greenhouse gas emissions in energy-intensive industries - Part 5: Lime industry (ISO/DIS 19694-5:2021); Text in German and English / Note: Date of issue 2021-04-09
DIN ISO 19694-3:2021-05 Stationary source emissions - Determination of greenhouse gas emissions in energy-intensive industries - Part 3: Cement industry (ISO/DIS 19694-3:2021); Text in German and English / Note: Date of issue 2021-04-09
DIN EN 17656:2022-12 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements; German version EN 17656:2022 / Note: Applies in conjunction with DIN EN ISO/IEC 17043 (2010-05).
DIN EN 17656:2022 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
DIN EN 19694-3:2016-10 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry; German version EN 19694-3:2016
DIN EN 19694-5:2016-10 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: Lime industry; German version EN 19694-5:2016 / Note: Applies in conjunction with DIN EN 19694-1 (2016-10).
DIN EN 17656:2021 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements; German and English version prEN 17656:2021
DIN EN 19694-6:2016-10 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Ferroalloy industry; German version EN 19694-6:2016 / Note: Applies in conjunction with DIN EN 19694-1 (2016-10).
DIN EN 19694-1:2016-10 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects; German version EN 19694-1:2016
DIN ISO 19694-6:2021-05 Stationary source emissions - Determination of greenhouse gas emissions in energy-intensive industries - Part 6: Ferroalloys and silicon industry (ISO/DIS 19694-6:2021); Text in German and English / Note: Date of issue 2021-04-09
DIN EN 13725:2022-06 Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate; German version EN 13725:2022
DIN EN 13725:2022 Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate
DIN EN 19694-2:2016 Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2: Iron and steel industry; German version EN 19694-2:2016
DIN EN 14385:2004-05 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V; German version EN 14385:2004
DIN EN 14385:2023 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V; German and English version prEN 14385:2023
DIN EN 19694-4:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 4: Aluminium industry; German version EN 19694-4:2016
DIN CEN/TR 17078:2017-10*DIN SPEC 33978:2017-10 Stationary source emissions - Guidance on the application of EN ISO 16911-1; German version CEN/TR 17078:2017
DIN CEN/TS 17198:2018-10*DIN SPEC 33979:2018-10 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance; German version CEN/TS 17198:2018
DIN EN 19694-5:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: Lime industry; German version EN 19694-5:2016
DIN EN 19694-1:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects; German version EN 19694-1:2016
DIN EN 19694-3:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry; German version EN 19694-3:2016

CZ-CSN

CSN 83 4511-1981 Classificatlon of emissions from air pollution sources
CSN 83 4752 Cast.3-1989 Air pollution control. Determination of fluorine emissions from stationary sources. Potenciometric method

European Committee for Standardization (CEN)

EN 19694-2:2016 Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2: Iron and steel industry
EN 19694-4:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 4: Aluminium industry
EN 17656:2022 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
prEN 17656-2021 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements
PD CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability@ execution and quality assurance
EN 19694-1:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects
PD CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique
FprEN 13725-2021 Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate
EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, TI and V
CEN/TS 17198:2018 Stationary source emissions - Predictive Emission Monitoring Systems (PEMS) - Applicability, execution and quality assurance
prEN 14385 rev Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V
PD CEN/TR 17078:2017 Stationary source emissions - Guidance on the application of EN ISO 16911-1
CEN/TR 17078:2017 Stationary source emissions - Guidance on the application of EN ISO 16911-1

U.S. Environmental Protection Agency (U.S. EPA)

EPA 40 CFR PART 63-2010 NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES

GSO

GSO ISO 10397:2015 Stationary source emissions -- Determination of asbestos plant emissions -- Method by fibre count measurement
OS GSO ISO 10397:2015 Stationary source emissions -- Determination of asbestos plant emissions -- Method by fibre count measurement

GB-REG

REG 40 CFR PART 63-2011 NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES

CEN - European Committee for Standardization

EN 1911-3:1998 Stationary Source Emissions - Manual Method of Determination of HCI - Part 3: Absorption Solutions Analysis and Calculation
EN 19694-5:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: Lime industry
EN 19694-3:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry
EN 19694-6:2016 Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Ferroalloy industry
PREN 13725-2019 Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate from stationary sources

PH-BPS

PNS ISO 19694-1:2021 Stationary source emissions - Determination of greenhouse gas emissions in energy-intensive industries - Part 1: General aspects

AT-ON

OENORM EN 17656-2021 Stationary source emissions - Requirements on proficiency testing schemes for emission measurements

Japanese Industrial Standards Committee (JISC)

JIS B 7985:2006 Continuous analyzers for methane in emission gas
JIS K 0108:1983 Analytical methods for determination of hydrogen sulfide in exhaust gas
JIS K 5601-4-1:2012 Testing methods for paint components.Part 4: Analysis for components emitted from film.Section 1: Determination of Formaldehyde emission

RO-ASRO

STAS 12368-1985 Modifier alloys for cast irons SPECTROGRAPHIC ANALYSIS BY EMISSION
STAS 11564-1982 RAPID STEELS FOR TOOLS Spectrographic analysis in emission

Danish Standards Foundation

DS/ISO 19701:2013 Methods for sampling and analysis of fire effluents
DS/ISO 19702:2006 Toxicity testing of fire effluents - Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis
DS/ISO 19694-1:2021 Stationary source emissions – Determination of greenhouse gas emissions in energy-intensive industries – Part 1: General aspects
DS/CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique
DS/CEN/TR 15983:2010 Stationary source emissions - Guidance on the application of EN 14181:2004
DS/ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
DS/EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V

HU-MSZT

MSZ KGST 1366-1978 Classification of pollutants emitted by air pollution sources

Society of Automotive Engineers (SAE)

SAE J215-1988 CONTINUOUS HYDROCARBON ANALYSIS OF DIESEL EMISSIONS
SAE ARP1533D-2024 Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines

SAE - SAE International

SAE J215-1980 Continuous Hydrocarbon Analysis of Diesel Emissions
SAE J215-2002 Continuous Hydrocarbon Analysis of Diesel Emissions
SAE J215-1970 CONTINUOUS HYDROCARBON ANALYSIS OF DIESEL EMISSIONS
SAE J215-1995 Continuous Hydrocarbon Analysis of Diesel Emissions (March 1995)
SAE ARP1533C-2016 Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines
SAE ARP1533A-2004 Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines

Korean Agency for Technology and Standards (KATS)

KS I ISO 10397-2006(2016) Stationary source emissions－Determination of asbestos plant emmissions(Method by fibre count measurement)
KS I ISO 10397:2006 Stationary source emissions－Determination of asbestos plant emmissions(Method by fibre count measurement)
KS I ISO 10397-2021 Stationary source emissions－Determination of asbestos plant emmissions(Method by fibre count measurement)
KS I 0588-2023 Stationary source emissions — Determination of greenhouse gas(GHG) emissions in semiconductor and display process
KS I 0588-2018 Stationary source emissions - Determination of Greenhouse Gas(GHG) emissions in semiconductor and display process
KS I ISO 10396-2009(2019) Stationary source emissions－Sampling for the automated determination of gas emission concentrations forpermanently-installed monitoring systems

VDI - Verein Deutscher Ingenieure

VDI 4200-1999 Durchfuehrung von Emissionsmessungen an gefuehrten Quellen
VDI 4200-2000 Durchfuehrung von Emissionsmessungen an gefuehrten Quellen
VDI 2448 Blatt 2-1993 Bewertung von stichprobenartigen Emissionsmessungen an gefuehrten Quellen anhand vorgegebener Emissionsbegrenzungen
VDI 2448 Blatt 1-1992 Planung von stichprobenartigen Emissionsmessungen an gefuehrten Quellen
VDI 2448 Blatt 1-1990 Planung von stichprobenartigen Emissionsmessungen an gefuehrten Quellen
VDI 4285 Blatt 1-2002 Determination of diffusive emissions - Basic concepts

Standard Association of Australia （SAA）

AS 4323.2:1995(R2014) Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
AS 4323.2:1995 Stationary source emissions - Determination of total particulate matter - Isokinetic manual sampling - Gravimetric method
AS/NZS 4323.4:2009 Stationary source emission area source sampling flux chamber technology
AS 4323.1:1995/Amdt 1:1995 Selection of stationary source emission sampling locations
AS 4323.1:1995(R2014) Selection of stationary source emission sampling locations

US-CFR-file

CFR 40-63.1332-2014 Protection of Environment. Part63:National emission standards for hazardous air pollutants for source categories (continued). Section63.1332:Emissions averaging provisions.

Lithuanian Standards Office

LST ISO 10397:2001 Stationary source emissions. Determination of asbestos plant emissions. Method by fibre count measurement
LST EN 14385-2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V

AENOR

UNE 77220:1998 STATIONARY SOURCE EMISSIONS. DETERMINATION OF ASBESTOS PLANT EMISSIONS. METHOD BY FIBRE COUNT MEASUREMENT.
UNE-EN 14385:2004 Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V

IN-BIS

IS 11255 Pt.3-1985 Stationary Source Emission Measurement Methods Part 3 Flow
IS 11255 Pt.1-1985 Stationary source emission measurement methods Part 1 Particulate matter

IT-UNI

UNI 7263-1973 X-ray analysis uses rubber to seal the radioactive source. size

PL-PKN

PN J02500-1991 Unsealed radioactive sources. Estimation of repeatability of analytical methods

American Society of Mechanical Engineers (ASME)

ASME PTC 19.10-1981 Part 10: Flue and Exhaust Gas Analyses Instruments and Apparatus

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE SA-96-11-2-1996 Calculating Chiller Emissions and Source Energy Use

Association of German Mechanical Engineers

VDI 4660 Blatt 2-2003 Calculation of emissions related to target energy for energy conversion

SE-SIS

SIS SS 02 84 21-1990 Stationary source emissions — Determination of the mass concentration of sulfur dioxide — Hydrogen peroxide — barium perchlorateIThorin-method

US-FCR

FCR DOE-STD-1112-98-1998 THE DEPARTMENT OF ENERGY LABORATORY ACCREDITATION PROGRAM FOR RADIOBIOASSAY

PT-IPQ

E 177-1965 Water sources and water discharge for public domestic use

Others: source analysis,source emissions,source analysis,Emission source,Emission source analysis,Stationary source exhaust emission concentration,Stationary source CO emissions,Emissions from pollution sources,pm2.5 source emissions,Stationary source emissions,Emissions from pollution sources,source analysis,Emission source monitoring system,Source Emissions Identification,source emissions,Emissions from pollution sources,Emission source,dynamic source emissions,Stationary source exhaust emission limits