double silver glass

double silver glass, Total:113 items.

The international standard classification for "double silver glass" includes: Glass products , Miscellaneous domestic and commercial equipment , Thermodynamics and temperature measurements , Materials for aerospace construction , Motion picture equipment , Deck equipment and installations .

The Chinese standard classification for "double silver glass" includes: Daily use glass products , Other daily necessaries , Thermal Measurement , Nonmetallic materials used for aviation and aerospace , Projection equipment and its accessory , Daily use glass, ceramic, enamel and plastic products in general , Deck fittings .

Professional Standard - Building Materials

JC/T 871-2000 Silver coated glass mirror
JC/T 871-2023 silver coated glass mirror

Taiwan Provincial Standard of the People's Republic of China

CNS 8365-1988 Mica with Glass Cloth on Both Sides ( Sheets and Types )
CNS 2541-1984 Multiple Glasses
CNS 7602-1988 Silicone Rubber Coated Glass Cloth on Both Side
CNS 9200-1982 Method of Corrective Test for Etched - Stem Mercury - in - Glass Thermometer (Partial Immersion Type)
CNS 3207-1986 Double Glass-Fiber-Covered Rectangular Copper Wire
CNS 3066-1982 Etched-Stem Mercury-in-Glass Thermometer (Partial Immersion Type)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 7672.2-1987 Glass-fiber covered winding wires--Part 2:Double glass fiber covered round wires
GB/T 32026-2015 Silver coated glass mirror―Environmental corrosion resistance test methods
GB/T 7672.4-1987 Glass-fiber covered winding wires--Part 4:Double glass-fiber covered rectangular wires
GB/T 28804-2012 Copper-free silver mirror on flat glass

工业和信息化部

QB/T 5035-2017 Double-wall glass cup

Group Standards of the People's Republic of China

T/CPIA 0028.2-2021 Glass for Photovoltaic Modules Part 2: Double-glass Module Backsheet Enhanced Reflection Coated Glass
T/JSQA 123-2022 Ultra thin semi—tempered antireflection glass for double glass photovoltaic module
T/JSQA 112-2021 Double-wall glass cup
T/CI 163-2023 High borosilicate double-wall glass cup
T/ZZB 1112-2019 Double-wall glass cup

National Metrological Verification Regulations of the People's Republic of China

JJG 131-2004 Verification Regulation of the Electric Contact Mercury-in-Glass Thermometers
JJG 618-1999 Verification Regulation of High Precision Mercury-in-Glass Thermometers

Professional Standard - Aviation

HB 6657-1992 Crazing Test Method for Aviation Organic Glass

Professional Standard - Machinery

JB/T 6162-2004 Specification for general process of plastic、glass beaded and metallised screens
JB/T 6163-1992 Type B - general process specification for glass bead screen

Professional Standard - Light Industry

QB/T 2298-1997 The Measurement of Coefficient of Linear Thermal Expansion with Double Line Method

Professional Standard-Ships

CB/T 3917-1999 Aluminium alloy soundproof window with cavity two-layer glass

Japanese Industrial Standards Committee (JISC)

JIS R 3220:2011 Glass in building -- Silvered, flat-glass mirror
JIS B 7412:1977 Enclosed-scale mercury-in glass thermometers
JIS C 2258:1986 Mica with glass cloth on both sides (sheets and tapes)
JIS A 4602:1973 Wooden sliding glass doors
JIS C 2367:1981 Silicone rubber coated glass cloths on both sides
JIS B 7413:1977 Etched-stem mercury-in-glass thermometers (partial immersion type)
JIS T 4206:1989 Clinical thermometers, mercury-in-glass, with maximum device
JIS C 3207:1978 Double glass-fiber-covered rectangular copper wires
JIS C 3208:1978 Double cotton covered rectangular copper wires

International Organization for Standardization (ISO)

ISO 25537:2008 Glass in building - Silvered, flat-glass mirror

SCC

06/30115482 DC ISO 25537. Glass in building. Silvered flat glass mirror
NS-EN 1036:1999 Glass in building — Mirrors from silver-coated float glass for internal use
CAN/CGSB-14.1-M87-1987 Mercury-in-Glass Clinical Thermometers
DIN EN 1036 Supplement 1:2003 Glass in building - Mirrors from silver-coated float glass for internal use - Explanations
DANSK DS/EN 1036-2:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
BS 691:1979 Specification for clinical maximum thermometers (mercury-in-glass)
NS-EN 1036-2:2008 Glass in building — Mirrors from silver-coated float glass for internal use — Part 2: Evaluation of conformity; product standard

Korean Agency for Technology and Standards (KATS)

KS B 5315-2003 Enclosed－scale mercury－in glass thermometers
KS P 6001-2009 Clinical thermometers(Mercury-in-glass, with maximum device)
KS P 6001-1986 Clinical thermometers(Mercury-in-glass, with maximum device)
KS P 6001-1989 Clinical thermometers(Mercury-in-glass, with maximum device)
KS C 3125-1974 Double glass -fiber - covered rectangular copper wires
KS C 3125-1985 Double glass -fiber - covered rectangular copper wires
KS B 5315-2003(2013) Enclosed－scale mercury－in glass thermometers
KS C 2337-1993 Silicone rubber coated glass cloths on both sides
KS P 6001-2013 Clinical thermometers(Mercury-in-glass, with maximum device)
KS C 2362-1993 MICA WITH GLASS CLOTH ON BOTH SIDES (SHEETS AND TAPES)
KS C 3125-1974(2020) Double glass -fiber - covered rectangular copper wires
KS B ISO 11455:2016 Raw optical glass－Determination of birefringence
KS B ISO 11455:2006 Raw optical glass-Determination of birefringence

German Institute for Standardization

DIN EN 1036 Beiblatt 1:2003 Glass in building — Mirros from silver-coated float glass for internal use
DIN EN 1036:1999 Glass in construction – mirror made of silver-coated float glass for indoor use
DIN 12553:1977 Laboratory glassware; double oblique bore stopcocks
DIN EN 1036-1:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods;English version of DIN EN 1036-1:2008-03
DIN EN 1288-2:2000 Glass in building - Determination of the bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000

AT-ON

ONORM B 3720-1986 Mirrors of silver coated plate glass

GSO

GSO ISO 25537:2013 Glass in building -- Silvered, flat-glass mirror
OS GSO OIML R7:2010 CLINICAL THERMOMETERS (mercury-in-glass, with maximum device)
GSO ISO 11455:2015 Raw optical glass -- Determination of birefringence
BH GSO ISO 11455:2016 Raw optical glass -- Determination of birefringence
OS GSO ISO 11455:2015 Raw optical glass -- Determination of birefringence
BH GSO EN 1036-2:2023 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard

CEN - European Committee for Standardization

EN 1036:1999 Glass in Building - Mirrors from Silver-Coated Float Glass for Internal Use

IN-BIS

IS 3438-1977 Specification for general silver-coated glass mirrors

Association Francaise de Normalisation

NF B30-101:1967 Glass. Bend test of a dual-glass test specimen.
NF B30-104:1968 Glass. Analysis of seals of two glasses obtained by hot welding. (photo-elasticimetric method).
NF EN 1036-1:2008 Glass in construction - Silver glass mirrors for interiors - Part 1: definitions, requirements and test methods
NF EN 1036-2:2008 Glass in construction - Silver glass mirrors for interiors - Part 2: conformity assessment - Product standard
NF P78-310-1*NF EN 1036-1:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 1 : definition, requirements and test methods
NF P78-310-2*NF EN 1036-2:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2 : Evaluation of conformity - Product standard
NF ISO 11455:1995 Raw optical glass - Determination of birefringence

Indonesia Standards

SNI 13-3491-1994 Silver nitrate crystal, Specification

South African Bureau of Standard

SANS 1236:2005 Silvered glass mirrors for general use

Danish Standards Foundation

DS 1045:1965 Double pane sealed units
DS/EN 1036-2:2008 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard

Spanish Association for Standardization (UNE)

UNE-EN 1036:1999 GLASS IN BUILDING. MIRRORS FROM SILVER-COATED FLOAT GLASS FOR INTERNAL USE.
UNE 400304:1997 LABORATORY GLASSWARE. TWO-MARK PIPETTES.
UNE 400304/1M:1999 LABORATORY GLASSWARE. TWO-MARK PIPETTES.

Standard Association of Australia （SAA）

AS 2190:1995 Clinical maximum thermometers - Mercury-in-glass

American Society for Testing and Materials (ASTM)

ASTM C1503-24 Standard Specification for Silvered Flat Glass Mirror
ASTM C1503-18 Standard Specification for Silvered Flat Glass Mirror
ASTM C1503-01 Standard Specification for Silvered Flat Glass Mirror

British Standards Institution (BSI)

BS EN 1036:1999 Glass in building - Mirrors from silver-coated float glass for internal use
BS EN 1036-2:2008 Glass in building — Mirrors from silver-coated float glass for internal use — Part 2: Evaluation of conformity; product standard
BS 691:1987(2001) Specification for Sub - normal range, ovulation and dual - scale clinical maximum thermometers (mercury - in - glass, solid stem)
BS ISO 11455:1995 Raw optical glass - Determination of birefringence
BS ISO 11455:1995(2000) Raw optical glass — Determination of birefringence
BS EN 1036-1:2007 Glass in building - Mirrors from silver-coated float glass for internal use - Definitions, requirements and test methods
BS 691:1987 Specification for sub-normal range ovulation and dual-scale clinical maximum thermometers (mercury-in-glass, solid stem)

HU-MSZT

MNOSZ 10164-1954 Double-head internal glass faucet
MNOSZ 10165-1954 Double tail cork inner glass technology
MNOSZ 10163-1954 Double-head monomer connection glass head

KR-KS

KS C 2337-2003(2023) Double-sided silicone rubber glass cloth
KS B ISO 11455-2016 Raw optical glass－Determination of birefringence

RU-GOST R

GOST 19855-1974 Contact glass mercury thermometers. Specifications
GOST EN 12600-2015 Glass and glass products. Test method for resistance to impact by dual tyres