Relative measurement is required

Relative measurement is required, Total:55 items.

The international standard classification for "Relative measurement is required" includes: Photographic equipment. Projectors .

The Chinese standard classification for "Relative measurement is required" includes: Camera and photograph instrument .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8338-2023 Camera shutters—Time measurement

Taiwan Provincial Standard of the People's Republic of China

CNS 11444-1985 Method of Test for Watt-Hour, Var-Hour and Maximum Demand indicators for Telemetering
CNS 11441-1985 Watt-Hour, Var-Hour and Maximum Demand Imdicators for Telemetering

Professional Standard - Post and Telecommunication

YD/T 4294-2023 Nanosecond GNSS Relative Timing Technical Requirements and Test Methods

Korean Agency for Technology and Standards (KATS)

KS C 1204-1980(2000) WATT-HOUR, VAR-HOUR AND MAXIMUN DEMAND INDICATORS FOR TELEMETERING
KS C 1204-1980 WATT-HOUR, VAR-HOUR AND MAXIMUN DEMAND INDICATORS FOR TELEMETERING
KS C 1204-2006 WATT-HOUR, VAR-HOUR AND MAXIMUN DEMAND INDICATORS FOR TELEMETERING
KS H ISO 279:2011 Essential oils-Determination of relative density at 20 ℃-Reference method
KS H ISO 279:2014 Essential oils — Determination of relative density at 20 degrees C — Reference method

SCC

AS 3583.6:1991 Methods of test for supplementary cementitious materials for use with portland cement - Determination of relative water requirement and relative strength
AWWA ACE58146 Dealing with Drought: Real-Time Management of Supply and Demand
CIE 212:2014 Guidance towards Best Practice in Psychophysical Procedures Used when Measuring Relative Spatial Brightness
AENOR UNE-EN 14718:2015 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method
BS 6712-1:1986 Measurement of hygroexpansivity of paper and board-Method for measurement of hygroexpansivity up to a maximum relative humidity of 68%
DIN 53000-4 E:2019 Draft Document - Viscometry - Measurement of kinematic viscosity by means of the Ubbelohde viscometer - Part 4: Viscosity relative increment at short flow times

Standard Association of Australia （SAA）

AS 3583.6:1995 Methods of test for supplementary cementitious materials for use with portland cement - Determination of relative water requirement and relative strength
AS 3583.6:2018 Methods of test for supplementary cementitious materials, Method 6: Determination of relative water requirement and strength index

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4082-1997 Effect of Residential Equipment Capacity on Energy Use@ Demand@ and Run-Time

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R TF.2118-0-2018 Transfert de temps relativiste
REPORT BT.1081-1-1990 The relative timing of sound and picture signals
ITU-R BT.1359-1998 Relative Timing of Sound and Vision for Broadcasting

GOST

GOST 24523.6-2023 Electrotechnical periclase. Method for determination of loss on ignition

International Commission on Illumination (CIE)

CIE 212-2014 Guidance towards Best Practice in Psychophysical Procedures Used when Measuring Relative Spatial Brightness

German Institute for Standardization

DIN 51562-3:1985 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times
DIN 51562-3:1985-05 Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times / Note: To be replaced by DIN 53000-4 (2019-04).

BR-ABNT

ABNT EB-5-1955 Single Phase Electronic Meter (Watt Hour Meter)
ABNT EB-45-1951 Single Phase Electronic Meter (Watt Hour Meter)
ABNT MB-117-1959 Polyphase electronic meters (kilowatt-hour meters)
ABNT EB-51-1959 Polyphase electronic meters (kilowatt-hour meters)
ABNT EB-933-1979 Multiphase Watt Hour Meter. job confirmation

CZ-CSN

CSN 65 6217-1971 Determination of the relative fflux time by Engler pparatus

European Committee for Standardization (CEN)

EN 14718:2014 Influence of organic materials on water intended for human consumption - Determination of the chlorine demand - Test method

RU-GOST R

GOST R ISO 11222-2006 Air quality. Determination of the uncertainty of the time average of air quality measurements
GOST 21751-1976 Sealants. Determination method of tensile strength, ultimate elongation at break and deformation set after break
GOST R ISO 14956-2007 Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
GOST 18299-1972 Paintwork materials. Method for determination of tensile strength, relative elongation at tear and modulus of elasticity
GOST 22316-1977 Aggregate means of information-measuring systems. Complex of normalized characteristics general requirements

British Standards Institution (BSI)

BS ISO 11222:2007 Air quality - Determination of the uncertainty of the time average of air quality measurements
BS ISO 279:1998 Essential oils - Determination of relative density at 20 °C - Reference method
BS ISO 279:2001 Essential oils - Determination of relative density at 20 °C - Reference method
BS EN 62150-4:2010 Fibre optic active components and devices - Test and measurement procedures - Relative intensity noise using a time-domain optical detection system

International Organization for Standardization (ISO)

ISO 279:1998 Essential oils - Determination of relative density at 20 °C - Reference method

YU-JUS

JUS ISO 279:1992 Essential oils. Determination of relative density at 20 degree C (Reference method)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C12.15-1990 Electricity Metering Solid-State Demand Registers for Electromechanical Watthour Meters

Association Francaise de Normalisation

NF T75-111*NF ISO 279:1999 Essential oils. Determination of relative density at 20 degrees Celsius. Reference method.

American Society for Testing and Materials (ASTM)

ASTM D5263-93e1 Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
ASTM D5263-93(2001) Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction

HU-MSZT

MNOSZ 17056-1954 Requirements for color measurement during indirect color measurement on objects

International Telecommunication Union (ITU)

ITU-R RAPPORT BT.1081-1 FRENCH-1990 The relative timing of sound and picture signals
ITU-R INFORME BT.1081-1 SPANISH-1990 The relative timing of sound and picture signals
ITU-R BT.1359-1-1998 Relative Timing of Sound and Vision for Broadcasting
ITU-R REPORT BT.1081-1-1990 The relative timing of sound and picture signals
ITU-R BT.1359-1 FRENCH-1998 Relative Timing of Sound and Vision for Broadcasting
ITU-R BT.1359-1 SPANISH-1998 Relative Timing of Sound and Vision for Broadcasting

GSO

GSO ISO 14956:2015 Air quality -- Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty

Others: Relative measurement is required