Core Coating Material

Core Coating Material, Total:146 items.

The international standard classification for "Core Coating Material" includes: Textile fabrics , Textiles , Rubber and plastics products in general , Surface treatment , Wires , Paper and board , Paints and varnishes , Surface treatment and coating , Materials and articles in contact with foodstuffs .

The Chinese standard classification for "Core Coating Material" includes: Police-used device and tool , Nonmetallic materials used for aviation and aerospace , Daily use plastic products , Material Protection , Bare wire , Paper , Paper pulp and paperboard , Decorative material , Coating , Hygiene, safety and labor protection , Printed and dyed cotton and cotton-blended fabric articles .

Professional Standard - Public Safety Standards

GA 361-2001 Material for police uniform - Nylon/cotton core spun rope and nylon hollow rope
GA 358-2001 Material for police uniform - Fabric for pocket
GA 357-2001 Material for police uniform - Coated fabric polyurethane for raincoat
GA 358-2007 Material for police uniform-Fabric for pocket
GA 362-2001 Material for police uniform - Waterproof and moisture penetrable coated fabric by coagulating polyurethane
GA 357-2009 Material for police uniform.Coagulation fabric for raincoat

Professional Standard - Aviation

HB 5436-1989 GH-1 Flat Grain Glass-fibre Fabric Honeycomb Core

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 12608-1990 Designation for the materials for thermal spraying coatings
GB/T 22374-2018 Floor coating
GB/T 22374-2008 Floor coating
GB/T 10335.3-2004 Coated paper and board—Coated ivory board
GB/T 10335.5-2008 Coated paper and board - Coated linerboard
GB/T 10335.4-2004 Coated paper and board—Coated folding board
GB/T 32502-2016 Overhead electrical stranded conductors composite core supported/reinforced
GB/T 31105-2014 Biaxially oriented polypropylene both sides coated film with diversified coating materials
GB/T 12608-1990 Designation of the materials for thermal spraying coatings
GB/T 12608-2003 Thermal spraying—Wires,rods and cords for flame and arc spraying—Classification and technical supply condition
GB/T 10335.2-2005 Coted paper and board - Light weight coated paper

工业和信息化部

HG/T 3830-2022 Coil coatings for precoating process

Professional Standard - Textile

FZ/T 14020-2020 Pigment dyed and washed cotton fabric

Professional Standard-Packaging

BB/T 0082-2019 Packaging material-Coated antistatic polyethylene terephthalate (PET)sheet（coil）
BB/T 0074-2017 Packaging material. Honeycomb core

Professional Standard - Chemical Industry

HG/T 4843-2015 Coil coatings for appliances
HG/T 3830-2006 Coil coatings
HG/T 2194-1991 Canvas core conveyor belt cloth layer joint regulations

Group Standards of the People's Republic of China

T/CNFIA 161-2022 Eco-friendly coated paper,paperboard and related products for food contact
T/CI 012-2021 New materials for health-coatings
T/CSTM 00455-2021 Powder coatings for precoated coil
T/ZZB 0293-2017 Coil coatings for architectures

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 10335.2-2018 Coated paper and board—Light weight coated paper
GB/T 10335.3-2018 Coated paper and board—Coated ivory board

Taiwan Provincial Standard of the People's Republic of China

CNS 8082-1992 Coatings for Thin Textured Finishes

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 10335.4-2017 Coated paper and board-Coated folding board
GB/T 14311-2017 Corduroy printed and dyed cotton fabric

Professional Standard - Building Materials

JC/T 2099-2012 Core-spun yarn for friction and sealing materials

Professional Standard - Light Industry

QB/T 1455-2012 Coated stamp paper（Coated stamp base paper）

Military Standard of the People's Republic of China-General Armament Department

GJB 10315-2021 Specification for aramid nonwoven fabrics (paper) for honeycomb core materials for aircraft structures

化学工业部

HG 2194-1991 Regulations for fabric layer joints of canvas core conveyor belts

(U.S.) Ford Automotive Standards

FORD E-MR004-4026-1981 BISMUTH WASH
FORD M4R70-A-1990 SILICA FLOUR BASE CORE WASH AND MOLD SPRAY
FORD M4R71-A-1990 SILICA FLOUR BASE CORE WASH AND MOLD SPRAY
FORD WSS-M99G170-A-1995 THERMAL CONDUCTOR, SILICONE RUBBER COATED ALUMINUM FOIL, ADHESIVE COATED, ONE
FORD M4R60-A-1990 CORE WASH - GRAPHITE BASE (PASTE TYPE)
FORD ESB-M5G31-A-1982 DEADENER, COMPOSITE PAD - ADHESIVE BACKED
FORD E-MR004-4022-1982 REFRACTORY COREWASH (SILICA GRAPHITE).
FORD ESB-M11P42-A-1988 ADHESION REQUIREMENTS FOR PRESSURE SENSITIVE, ADHESIVE COATED VIBRATION DAMPING MATERIALS
FORD M4R36-A-1992 CORE WASH - CARBON MODIFIED SILICA FLOUR BASE (PASTE TYPE)
FORD M4R52-A-1992 CORE WASH - CARBON MODIFIED SILICA FLOUR BASE (POWDER TYPE)
FORD M4R54-A-1992 CORE WASH - SILICA FLOUR MODIFIED CARBON BASE (POWDER TYPE)
FORD ASL PAINTS-70J-2020 APPROVED SOURCE LIST (ASL) - CATEGORY PAINTS AND COATING MATERIALS - POWDER COATINGS

British Standards Institution (BSI)

BS EN 16074:2011 Paints and varnishes. Determination of non-volatile matter content and spreading rate of coil coating materials
BS ISO 21949:2004 Coated abrasives. Plain sheets with holes for dust extraction
BS EN 4474:2016 Aerospace series. Aluminium pigmented coatings. Coating methods
BS EN 28094:1994 Steel cord conveyor belts - Adhesion strength test of the cover to the core layer
BS EN 927-2:2014 Paints and varnishes. Coating materials and coating systems for exterior wood. Performance specification
BS EN 927-2:2008 Paints and varnishes - Coating materials and coating systems for exterior wood - Performance specification
BS EN 927-2:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2:Performance specification
BS EN 927-3:2000 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
BS EN 927-3:2012 Paints and varnishes. Coating materials and coating systems for exterior wood. Natural weathering test

(U.S.) Parachute Industry Association

PIA-C-7515D-2011 CORD, NYLON, CORELESS

German Institute for Standardization

DIN EN 16074:2011 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials; German version EN 16074:2011
DIN CEN/TS 16499:2014 Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood; German version CEN/TS 16499:2013
DIN 55991-2:1992 Coating materials; coatings for nuclear facilities; identity testing of coating materials

KR-KS

KS B ISO 3366-2018 Coated abrasives — Abrasive rolls

SCC

AS 1580.107.8:1979 Paints and related materials - Methods of test, Method 107.8: Application of paint at a nominated spreading rate by determination of wet film mass (brush application)
MIL MIL-C-83489-1976 CLOTH, COATED, NYLON, POLYURETHANE COATED
MIL MIL-C-19635-1956 CLOTH, COATED, NON-SLIP TABLE COVERING (NO S/S DOCUMENT)
MIL MIL-STD-1487A-2020 GLOSSARY OF CLOTH COATING IMPERFECTIONS
MIL MIL-C-70991A-1993 CLOTH, COATED, KEVLAR-29, POLYURETHANE COATED (SUPERSEDING MIL-C-70991)
MIL MIL-C-87178-1984 CLOTH, COATED, NYLON, POLYURETHANE COATED (NO S/S DOCUMENT)
MIL MIL-C-20610-1952 CLOTH, CAMBRIC, VARNISHED, UNPARAFFINED. (NO S/S DOCUMENT)
MIL MIL-C-14366E-1986 CLOTH, COATED, NYLON TWILL (ONE SIDE COATED) (SUPERSEDING MIL-C-14366D) (NO S/S DOCUMENT)
MIL MIL-C-12189H-1988 CLOTH, COATED: BUTYL COATED, TOXICOLOGICAL AGENTS PROTECTIVE (SUPERSEDING MIL-C-12189G)
MIL MIL-C-87019A-1982 CLOTH, NONWOVEN, DISPOSABLE, SPUNBONDED OLEFIN (COATED AND UNCOATED) (SUPERSEDING MIL-C-87019)
HOLDEN HN 1445-2001 Body Cloth Material for Transfer Printing
BS 3900-J2:1987 Methods of test for paints-Determination of particle size distribution of coating powders by sieving
MIL MIL-C-26712B-1982 CLOTH, COATED, NYLON, CHLOROPRENE COATED (SUPERSEDING MIL-C-26712A)
BS EN 1953:1998+A1:2009 Atomizing and spraying equipment for coating materials. Safety requirements
MIL MIL-C-22787D-1987 CLOTH, COATED, FUEL AND FLAME RESISTANT (SUPERSEDING MIL-C-22787C)
MIL MIL-C-51251A-1988 CLOTH, COATED; CBR PROTECTIVE (SUPERSEDING MIL-C-51251)
MIL MIL-C-81395A-1981 CLOTH, COATED, DUCK, NYLON (NO S/S DOCUMENT) (SUPERSEDING MIL-C-81395)

Korean Agency for Technology and Standards (KATS)

KS B ISO 3366:2018 Coated abrasives — Abrasive rolls
KS E 4001-1963 Vinyl coated-c1oth tubes for ventilation
KS E 4001-1997 Vinyl coated-c1oth tubes for ventilation
KS E 4001-1976 Vinyl coated-c1oth tubes for ventilation
KS W 1126-2016 Core material, plastic honeycomb, laminated glass fabric base,for aircraft structural and electronic applications
KS F 4920-2004 Liquid-applied compounds forwaterproofing membrane coating of exterior wall
KS B ISO 1071:2016 Covered electrodes for manual arc welding of cast iron－Symbolization
KS B ISO 1071:2008 Covered electrodes for manual arc welding of cast iron-Symbolization
KS M ISO 15528:2003 Paints, varnishes and raw materials for paints and varnishes-Sampling
KS M ISO 15528:2015 Paints, varnishes and raw materials for paints and varnishes－Sampling
KS T 1053-2012 Gummed cloth tapes(for packaging)
KS M ISO 16053:2016 Paints and varnishes－Coating materials and coating systems for exterior wood－Natural weathering test
KS M ISO 16053:2011 Paints and varnishes-Coating materials and coating systems for exterior wood-Natural weathering test
KS C 2351-1999 Glassfabric based varnished fabrics
KS M 7103-2018 Coated paper
KS C 2351-1984 Glass-fabric based varnished fabrics
KS C 2351-2014 Glass-fabric based varnished fabrics

Association Francaise de Normalisation

NF EN ISO 12215-2:2018 Small ships - Hull construction and samples - Part 2: materials: core materials for sandwich construction, coated materials
NF E75-076:1983 Coated abrasives. Truncated cone sleeves. Designation. Dimensions.
NF J95-046-2:2002 Small craft - Hull construction and scantlings - Part 2 : materials : core materials for sandwich construction, embedded materials.
NF E75-074:1996 Coated abrasives. Abrasive discs. Designation. Dimensions. Safety requirements.
NF X34-109*NF EN ISO 17830:2016 Solid biofuels - Particle size distribution of disintegrated pellets
NF T30-091:2013 Paints, varnishes and raw materials for paints and varnishes - Sampling

U.S. Military Regulations and Norms

ARMY TT-P-595 A-1972 PRESERVATIVE COATING, CANVAS
ARMY MIL-C-70991 A-1993 CLOTH, COATED, KEVLAR-29, POLYURETHANE COATED
ARMY MIL-C-70991 A (1)-1994 CLOTH, COATED, KEVLAR-29, POLYURETHANE COATED
ARMY A-A-59464 A VALID NOTICE 1-2008 Plastic Plastisol (for Coating Metallic Objects)
ARMY MIL-C-43062 D-1988 CLOTH, COATED, NYLON, RESIN MODIFIED BUTYL COATED, ACID AND FUEL RESISTANT
ARMY MIL-STD-3021 CHG 1-2011 MATERIALS DEPOSITION, COLD SPRAY

Japanese Industrial Standards Committee (JISC)

JIS H 8261:2007 Wires, rods and cords for flame and arc thermal spraying
JIS C 2561:1992 Measuring methods for characteristics of materials of ferrite cores

AENOR

UNE 16327:1982 ABRASIVE COATED: CLOTH AND PAPER ROLLS.

United States Navy

NAVY MIL-C-22787 D-1987 CLOTH, COATED, FUEL AND FLAME RESISTANT
NAVY MIL-C-19002 D-1985 CLOTH, COATED, AND STRIP, COATED CLOTH-POLYCHLOROPRENE ON NYLON
NAVY MIL-C-19002 D VALID NOTICE 1-1991 CLOTH, COATED, AND STRIP, COATED CLOTH-POLYCHLOROPRENE ON NYLON

Society of Automotive Engineers (SAE)

SAE AMS-C-8073-1998 Core Material, Plastic Honeycomb, Laminated Glass Fabric Base, for Aircraft Structural and Electronic Applications
SAE AMS3850A-1993 CLOTH, CHLOROPRENE (CR) COATED NYLON

HU-MSZT

MNOSZ 3674-1952 Land Paint Buda Land
MNOSZ 4170-1955 Testing of fabrics with waterproof protective coating
MSZ KGST 1444-1978 Acidity test of coating materials

International Federation of Trucks and Engines

NAVISTAR MPAPS G-5-2016 Paint Material Requirements
NAVISTAR CEMS G-5 PART IB-2014 VOID - Paints Material Requirements
NAVISTAR TMS 9001-2009 Pre-Paint Processing Materials

TN-INNORPI

NT AB 022-1970 Distributie draden met massieve geleiders, met pvc geisoleerd,in tweedraads- drie- draads-,vierdraads-en vijfdraadsgroepen.

Defense Logistics Agency

DLA CCC-C-441 C-1969 CLOTH, CORDUROY, COTTON
DLA CCC-C-441 C VALID NOTICE 1-1987 CLOTH, CORDUROY, COTTON

YU-JUS

JUS N.R8.084-1982 E cores ofsoft magnetic materials.

BR-ABNT

ABNT EB-285-1979 Fire retardant coatings or materials

American National Standards Institute （ANSI)

ANSI/BHMA A156.18-2012 Materials and Finishes
ANSI/ASME B30.27-2009 Material Placement Systems
ANSI/ASME B30.27-2005 Material Placement Systems

International Organization for Standardization (ISO)

ISO 1519:2011 Paints and varnishes - Bend test (cylindrical mandrel)
ISO 17830:2016 Solid biofuels - Particle size distribution of disintegrated pellets
ISO 16053:2010 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
ISO 16053:2018 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
ISO 16053:2004 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test

AT-ON

ONORM C 2515-1987 Metallic coatings; electroplated coatings on plastic materials

SE-SIS

SIS SS 2994-1982 Coated abrasive products - Abrasive cloth and paper in sheets

International Electrotechnical Commission (IEC)

IEC 60635:1978 Toroidal strip-wound cores made of magnetically soft material

CZ-CSN

CSN 34 6562-1974 Electroinsulating materials. Varnished fabrics

European Committee for Standardization (CEN)

PD CEN/TS 16359:2012 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of knot staining resistance of wood coatings
EN 927-3:2000 Paints and Varnishes - Coating Materials and Coating Systems for Exterior Wood - Part 3: Natural Weathering Test

GM Europe

GME TM 281100-1974 Planenstoff Tarpaulin Material German

Danish Standards Foundation

DS/EN 125000:1998 Generic specification: Cores made of ferrite materials

GSO

GSO ISO 16053:2022 Paints and varnishes — Coating materials and coating systems for exterior wood — Natural weathering test

Others: Interconnect structure material reinforced core material sectional specification set,Tower core material,Core Coating Material,Tower core material,Sandwich structure material,Sandwich material