glass compressive strength

glass compressive strength, Total:97 items.

The international standard classification for "glass compressive strength" includes: Reinforced plastics , Bolts, screws, studs , Products in fibre-reinforced cement .

The Chinese standard classification for "glass compressive strength" includes: Fibre reinforced composites , Electrical insulating material and its products , Cement .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15231.2-1994 Test methods for the properties of glass fibre reinforced cement. The compressive strength
GB/T 1448-1983 Test method for compressive properties of glass fiber-reinforced plastics
GB/T 14208.3-2009 - Glass - Reinforced plastics - Determination of mechanical properties on rods made of roving - Reinforced resin - Part 3: Determination of compressive strength
GB/T 1450.2-1983 Test method for the punch-type of strength of glass fiber-reinforced plastics
GB/T 14209-1993 Textile glass－Rovings－Determination of compressive strength of rod composites
GB/T 43874-2024 Test method for compressive properties of glass materials and products
GB/Z 21213-2007 High strength laminated sheet based on halongen-free flame-resistant resins and glass cloth

Taiwan Provincial Standard of the People's Republic of China

CNS 12781-1990 Method of Test for Compressive Properties of Glass Fiber Reinforced Plastics

Military Standard of the People's Republic of China-General Armament Department

GJB 1798-1993 Test method for static pressure damage resistance of aircraft glass
GJB 1798A-2020 Test method for pressure failure strength of aircraft glass
GJB 1797-1993 Test method for pressure difference strength of aircraft electrically heated glass under temperature difference

Professional Standard - Building Materials

JC/T 2285-2014 Test method for isostatic compression strength(microspheres-gas compression)for hollow glass microspheres

Polski Komitet Normalizacyjny (PKN)

PN S13062-1966 Determina?ion of compressive s?reng?h of glass

International Organization for Standardization (ISO)

ISO 3605:1987 Textile glass; Rovings; Determination of compressive strength of rod composites
ISO 3597-3:1993 Textile-glass-reinforced plastics; determination of mechanical properties on rods made of roving-reinforced resin; part 3: determination of compressive strength
ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength
ISO 1288-4:2016 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass

Belgian Standards Institute

NBN T 41-007-1975 Textile glass reinforced plastics — Determination of the compressive properties

Spanish Association for Standardization (UNE)

UNE 43-506-1985 Textile glass. Textile glass mats, determination of average thickness, negative pressure thickness and recovery thickness after compression
UNE 43506:1985 TEXTILE GLASS. MATS OF TEXTILE GLASS. DETERMINATION OF AVERAGE THICKNESS, THICKNESS UNDER LOAD AND RECOVERY AFTER COMPRESSION
AENOR UNE 43023:1953 GLASS. SAFETY GLASS. INFLUENCE OF HUMIDITY ON LAMINAR GLASS
UNE 43 023 Glass. Safety glass, effect of humidity on pressed glass
UNE-EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
AENOR UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.
UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.
AENOR UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.

Korean Agency for Technology and Standards (KATS)

KS M 3383-2004 Testing methods for compressive properties of glass fiber reinforced plastics
KS M 3383-2009 Testing methods for compressive properties of glass fiber reinforced plastics
KS M ISO 3597-3:2012 Textile-glass-reinforced plastics-Determination of mechanical properties on rods made of roving-reinforced resin-Part 3:Determination of compressive strength

Japanese Industrial Standards Committee (JISC)

JIS K 7056:1995 Testing method for compressive properties of glass fiber reinforced plastics
JIS R 3111-4:2023 Glass in building -- Determination of the bending strength of glass -- Part 4: Testing of channel shaped glass

GM Global

GMW 16900-2013 Polypropylene, Long Glass Fiber Reinforced, Compression Molded Issue 1; English
GMW 16901-2013 Polypropylene, Glass Fiber Fabric Reinforced, Compression Molded Issue 1; English
GMW 16902-2013 Polypropylene - 45% Glass/Mineral Reinforced, Sheet, Compression Molded Issue 1; English

Ente Nazionale Italiano di Unificazione

UNI 7531-1976 glass container. Determination of strength against internal pressure
UNI EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
UNI 8039-1:1979 Textile glass. Mats for reinforcement of plastics. Test methods. Determination of average thickness, thickness under load and recovery after compression.
UNI EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
UNI 9302:1988 Glass containers. Determination of impact resistance.

Association Francaise de Normalisation

NF T57-103:1991 TEXTIL-GLASS-REINFORCED PLASTICS. DETERMINATION OF COMPRESSIVE PROPERTIES IN THE DIRECTION PARALLEL TO THE PLANE OF LAMINATION.
NF EN 572-7:2013 Glass in construction - Basic products: soda-lime silicate glass - Part 7: reinforced or unreinforced profiled glass
NF P78-341*NF EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1 : fundamentals of testing glass.
NF P78-344*NF EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4 : testing of channel shaped glass
NF EN 59:2016 Glass-reinforced plastics - Determination of penetration hardness using a Barcol hardness tester
NF T57-106*NF EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
NF T57-160-3*NF ISO 3597-3:2004 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3 : determination of compressive strength
NF P84-312:1981 Waterproofing . High-strength flexible reinforced bituminous covering with double fibreglass and fibreglass fabric reinforcement.
NF P78-401:1988 Glass and glazing. Glazing resistance to firearm projectiles. Shooting test on glazing.

Danish Standards Foundation

DS/INSTA 154:1987 Security glazings and safety glazings. Classification of resistance
DANSK DS/EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
DS/EN 59:1978 Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor
DANSK DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
DANSK DS/EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
DS/EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass

Gosstandart of Russia

GOST R 57963-2017 Hollow glass microspheres. Method for determination of compressive strength
GOST 34208-2017 Glassfiber. Mats. Determination of average thickness, thickness under load and recovery after compression
GOST 32281.1-2013 Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass

U.S. Military Regulations and Norms

ARMY MIL-PRF-46197 A-1997 LAMINATE: HIGH-STRENGTH GLASS, FABRIC- REINFORCED, POLYESTER RESIN PREIMPREGNATED
ARMY MIL-G-47032 A-1990 GLASS, POTASH SODA BARIUM, LEAD-FREE COMPRESSION SEALING

Standards Norway

NS-EN 59:2016 Glass reinforced plastics — Determination of indentation hardness by means of a Barcol hardness tester
NS-EN 1288-4:2000 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
NS-EN 59:1977 Glass reinforced plastics — Measurement of hardness by means of a Barcol impressor
NS-EN 1288-1:2000 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 3597-3:2015 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength

GCC Standardization Organization

GSO ISO 3597-3:2015 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength
GSO ISO 1288-1:2021 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
GSO ISO 1288-4:2021 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass

American Society for Testing and Materials (ASTM)

ASTM C147-86(2000) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C147-86(2020) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM C147-86(1995) Standard Test Methods for Internal Pressure Strength of Glass Containers
ASTM D3517-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 3597-3:2016 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength
BH GSO ISO 1288-1:2022 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
BH GSO ISO 1288-4:2022 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
BH GSO ISO 12543-4:2024 Glass in building — Laminated glass and laminated safety glass — Part 4: Test methods for durability

British Standards Institution (BSI)

BS ISO 3597-3:2003 Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of compressive strength
BS EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Testing of channel shaped glass
BS EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Fundamentals of testing glass
BS ISO/TS 12928:1999 Glass in building. Determination of the bending strength of glass. Fundamentals of testing glass

German Institute for Standardization

DIN EN 59:2016-06 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version EN 59:2016
DIN EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000
DIN EN 1288-4:2000-09 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000 / Note: To be replaced by DIN EN ISO 1288-4 (2007-10).
DIN EN 59 E:2015 Draft Document - Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version prEN 59:2015
DIN EN 1288-1:2000-09 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000 / Note: To be replaced by DIN EN ISO 1288-1 (2007-10).
DIN EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000

Lithuanian Standards Office

LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
LST EN 1288-4-2002 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
LST EN 1288-1-2002 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass

European Committee for Standardization (CEN)

EN 1288-4:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 4: Testing of Channel Shaped Glass
EN 1288-1:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 1: Fundamentals of Testing Glass

Swedish Institute for Standards

SS-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass�
SS-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass

Bureau of Indian Standards

IS 5437-2024 Rolled Glass - Patterned, Extra Clear Patterned, Wired and Wired-Patterned Glass - Specification

Czech Standards Institute (UNMZ)

CSN 72 1565 Cast.8-1985 Testing of brick clays. Determination of the compression strength

South African Bureau of Standard

SANS 1538:2001 Plain-woven glass rovings for glass-reinforced plastics laminates