zero headspace method

zero headspace method, Total:63 items.

The international standard classification for "zero headspace method" includes: Valves , Electrical engineering (Vocabularies) , Protection against crime , Occupational safety. Industrial hygiene .

The Chinese standard classification for "zero headspace method" includes: Valve , General grippers , Technical management , Crime judging technology , Labor sanitation , Diagnostic standard for occupational diseases , Basic standards and general methods .

Group Standards of the People's Republic of China

T/BSM 0001-2023 Determination of hydrogen content in hydrogen water Headspace gas chromatographic method
T/WZBF 019-2022 Components of valves—Top core

Professional Standard - Machinery

JB/T 10117.4-1999 The parts and units of jigs and fixtures - Inner taper hole centre
JB/T 10117.1-1999 The parts and units of jigs and fixtures - Inside draft centre
JB/T 12642.5-2016 Progressive dies for motor cores. Components. Part 5: Stacking ejector pins
JB/T 1741-2008 Components of valves-Top core
JB/T 10117.3-1999 The parts and units of jigs and fixtures - Outside draft centre
JB/T 10117.2-1999 The parts and units of jigs and fixtures - Holding inside draft centre
JB/T 8026.2-1999 The parts and units of jigs and fixtures - Adjustable supporting bolta
JB/T 10117.5-1999 The parts and units of jigs and fixtures - Holding inner taper hole centre

Professional Standard - Military and Civilian Products

WJ 811-1997 A-type spring top movable stopper for cold stamping die parts
WJ 836-1997 Cold stamping die parts jacking screw
WJ 812-1997 B-type spring top movable stopper for cold stamping die parts
WJ 835-1997 Ejector pin for cold stamping die parts
WJ 813-1997 Cold stamping die parts torsion spring spring top movable stopper device

Professional Standard - Electron

SJ/T 10519.12-1994 Components of injection mould for plastics - Shouldered ejector pins
SJ/T 10519.13-1994 Components of injection mould for plastics-Flat ejector pins
SJ/T 10519.11-1994 Components of injection mould for plastics-Ejector pins
SJ/T 10519.3-1994 Components of injection mould for plastics-Ejector retainer or plate
SJ/T 10519.14-1994 Components of injection mould for plastics-Ejector pins with thread

Professional Standard - Aerospace

QJ 1000.119-1986 Machine tool fixture parts and component process card top pressure support
QJ 1000.133-1986 Machine tool fixture parts and components process card ejector pin
QJ 1350.87-1988 Cold stamping die parts and components process card thread ejector
QJ 1350.86-1988 Cold stamping die parts and components process card plus pin thread ejector
QJ 1350.82-1988 Cold stamping die parts and components process card ejector
QJ 1350.88-1988 Cold stamping die parts and components process card top plate
QJ 1350.85-1988 Cold stamping die parts and components process card with threaded ejector pin with head
QJ 1350.84-1988 Cold stamping die parts and components process card thread ejector
QJ 1350.62-1988 Cold stamping die parts and components process card torsion spring spring top stopper
QJ 1350.65-1988 Cold stamping die parts and components process card reed spring top stopper

Professional Standard - Public Safety Standards

GA/T 208-2019 Forensic sciences—Examination methods for phosphide in biological samples—HSGC and HSGC-MS

Chongqing Provincial Standard of the People's Republic of China

DB50/T 835-2017 Determination of Methanol in Water by Headspace Gas Chromatography

Professional Standard - Environmental Protection

HJ 1067-2019 Water quality—Determination of benzene and its analogies —Headspace / gas chromatography
HJ 1072-2019 Water quality—Determination of pyridine—Headspace / gas chromatography

National Health Commission of the People's Republic of China

GBZ/T 310-2018 Determination of 1-bromopropane in urine— Headspace-gas chromatography method
GBZ/T 309-2018 Determination of acetone in urine— Headspace-gas chromatography method

Professional Standard - Hygiene

WS/T 62-1996 Urine - Determination of methanol - Headspace - Gas chromatographic method

中华人民共和国国家卫生和计划生育委员会

WS/T 96-1996 Urine―Determination of trichloroacetic acid―Headspace gas chromatographic method

Standard Association of Australia （SAA）

AS 4439.2:1997 Wastes, sediments and contaminated soils - Preparation of leachates - Zero headspace procedure
AS 4439.2:2019 Wastes, sediments and contaminated soils, Part 2: Preparation of leachates — Zero headspace procedure

RU-GOST R

GOST R 51809-2001 Frech white-headed cabbage for retail. Specifications
GOST R 50128-1992 Aircraft jacking parts. Types and dimensions

German Institute for Standardization

DIN 48173:1959 Power current overhead lines, rated voltage below 1 kV; roof anchorage, compilation, piece parts
DIN 48170:1986 Roof poles for overhead power lines up to 1000 V; combination, components
DIN 48173:1959-11 Power current overhead lines, rated voltage below 1 kV; roof anchorage, compilation, piece parts
DIN 48172:1963-10 Inlet head of roof support; assembly drawing, parts
DIN 48172:1963 Inlet head of roof support; assembly drawing, parts

International Truck and Engine Corporation (ITEC)

INTERN ESP E-72.103-PP-2008 High Crown Nuts - Preferred Parts (Noun Code 5780)

GSO

GSO ISO 24264:2023 Footwear — Test methods for hollow and compact heels with top pieces — Top piece attachment strength
BH GSO ISO 24264:2023 Footwear — Test methods for hollow and compact heels with top pieces — Top piece attachment strength

IT-UNI

UNI EN ISO 24264:2021 Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength

SE-SIS

SIS SS 424 06 87-1979 Overhead line material — Top caps

SCC

DANSK DS/ISO 24264:2020 Footwear – Test methods for hollow and compact heels with top pieces – Top piece attachment strength

PL-PKN

PN-EN ISO 24264-2021-04 E Footwear -- Test methods for hollow and compact heels and top pieces -- Top piece attachment strength (ISO 24264:2020)

US-FCR

FCR FED H-08-1 SEC 15764-2003 ROOF TOP AIR HANDLNG UNITS

American Society for Testing and Materials (ASTM)

ASTM D5076-90(2000)e1 Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes

British Standards Institution (BSI)

BS ISO 43:2016 Aircraft. Jacking pads

U.S. Military Regulations and Norms

ARMY MIL-C-70683 A NOTICE 1-1998 CHARGE, DEMOLITION: 40LB, CRATERING PARTS FOR AND LOADING, ASSEMBLING AND PACKING
ARMY MIL-C-70683 A-1991 CHARGE, DEMOLITION: 40LB, CRATERING PARTS FOR AND LOADING, ASSEMBLING AND PACKING

AT-ON

OENORM EN ISO 24264:2021 Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength (ISO 24264:2020)

CH-SNV

SN EN ISO 24264:2021 Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength (ISO 24264:2020)

International Organization for Standardization (ISO)

ISO 43:1976 Aircraft jacking pads

Lithuanian Standards Office

LST EN ISO 24264:2020 Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength (ISO 24264:2020)