Board-to-Board Signal Connections

Board-to-Board Signal Connections, Total:231 items.

The international standard classification for "Board-to-Board Signal Connections" includes: Waterproofing , Railway engineering in general , Graphical symbols for use on specific equipment , Welded joints , Wood-based panels .

The Chinese standard classification for "Board-to-Board Signal Connections" includes: Combination grippers , Roof and pavement waterproof and barrier material , Technical management , Signal equipment , Locomotive repair technology and equipment , Technical management , Vessel materials and their inspection methods , Artificial board .

---

Professional Standard - Aviation

• HB 20105-2012 Requirements for the planars filter electrical connectors
• HB 1729-1987 Lengthened Connection Plate
• HB 4297-1989 A Type Square Gusset
• HB 6033-1996 Asymmetric tee pipe joint through the partition
• HB 4299-1989 C Type Square Gusset
• HB 3153-1978 connecting plate
• HB 3990-1987 Gusset
• HB 1352-1987 Gusset
• HB 4298-1989 B Type Square Gusset
• HB 4301-1989 B Type Rectangular Gusset
• HB 6031-1986 Asymmetric tee pipe joint through the partition
• HB 6031～6033-1996 Asymmetric tee pipe joint through the partition
• HB 6031-1996 Asymmetric tee pipe joint through the partition
• HB 6032-1986 Asymmetric tee pipe joint through the partition
• HB 1597-1987 Gusset
• HB 4300-1989 A Type Rectangular Gusset
• HB 6032-1996 Asymmetric tee pipe joint through the partition
• HB 6033-1986 Asymmetric tee pipe joint through the partition

Professional Standard - Aerospace

• QJ 1890-1990 Printed circuit board external connection method and design specification
• QJ/Z 36-1978 Sample and proofreading sample (d=0.5~6.5)

Group Standards of the People's Republic of China

• T/SDZBZZ 003-2023 Flat plate docking automatic welding machine
• T/QGCML 2655-2023 Metal substrate heat dissipation card connector
• T/CECA 74-2022 0.5mm、0.635mm、0.8mm Pitch Floating Board to Board Connector
• T/CECS 10092-2020 Wall and floor for assembled lightweight board building with corner connection
• T/CVIA 51-2016 X+C board and T-CON board signal input socket technical specification
• T/CVIA 006-2016 X+C board and T-CON board signal input socket technical specification
• T/ZPP 032-2022 High Speed Backplane Connectors

Professional Standard - Electron

• SJ 3039.5-1988 Combined dies - Connecting plate

Professional Standard - Ferrous Metallurgy

• YB/T 4569-2016 Heavy steel plate by welded CC-slabs cladding rolling
• YB/T 4539-2016 Steel wires for pinning connect with steel plate

Professional Standard - Railway

• TB/T 2104-1989 XBD Type Electric Motor Signal Mechanism
• TB/T 2883.8-1998 Calibration Sample Plate for S Curved Surface of No.15 Coupler Knuckle
• TB/T 3205.3-2016 Track lead, connectors for impedance bond. Part 3: Midpoint connector
• TB/T 1577-1985 DZB type arm plate automatic control signal light
• TB/T 3205.3-2008 Track Lead, Midpoint Connectors for Impedance Bond - Part 3: Midpoint Connector
• TB/T 2883.7-1998 Calibration Sample Plate for Antibouncer of No. 15 Car Coupler Lower Lock Pin
• TB 1412-1981 Method for drawing printed board diagram of communication signal products

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 16679-1996 Designations for signals and connections
• GB/T 13450-1992 Method of wide plate tension test for butt welded joint

Taiwan Provincial Standard of the People's Republic of China

• CNS 13637-1996 Steel Plate Butt-welding Pipe Fittings

Military Standard of the People's Republic of China-General Armament Department

• GJB 859.23-1990 Asymmetric tee pipe joint through partition

Professional Standard - Military and Civilian Products

• WJ 1474-1985 Clamp seat and its parts and components connecting plate

Professional Standard - Forestry

• LY/T 3040-2018 Test method fortruss plate connection

International Telecommunication Union (ITU)

• ITU-T Q.522 SPANISH-1988 DIGITAL EXCHANGE CONNECTIONS@ SIGNALLING AND ANCILLARY FUNCTIONS
• ITU-T Q.709 SPANISH-1993 SIGNALLING SYSTEM NO. 7 - HYPOTHETICAL SIGNALLING REFERENCE CONNECTION
• ITU-T Q.709-1984 Hypothetical signalling reference connection

Indonesia Standards

• SNI 01-6243.2-2000 Jointed board and jointed stick for tables
• SNI 10-1688-1989 Instalasi listrik dalam kapal : Alat hubung, papan hubung, papan hubung bagi, papan bagi.

German Institute for Standardization

• DIN V 46249-1:1980 Snap-on connectors, non insulated; requirements, tests
• DIN 21382:1988 Rope attachments; outer plates, inner plates
• DIN EN 61076-4-115:2004-02 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (IEC 61076-4-115:2003); German version EN 61076-4-115:2003
• DIN 41620-1:1970-09 Connectors for printed boards (flat contacts, single row); edge socket connectors-edge board contacts
• DIN 41650-1:1986-05 Sectional specification for connectors; connectors for printed boards
• DIN 41620-1:1970 Connectors for printed boards (flat contacts, single row); edge socket connectors-edge board contacts
• DIN EN 61076-4-115:2004 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (IEC 61076-4-115:2003); German version EN 61076-4-115:2003
• DIN EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications (IEC 61076-4-113:2002); German version EN
• DIN 41650-1:1986 Sectional specification for connectors; connectors for printed boards
• DIN EN 123500/A2:1996 Sectional specification: Flexible printed boards with through connections; German version EN 123500:1992/A2:1995
• DIN 20501:1988 Pit railways; rails S 30, butt strap Fl 30

Association Francaise de Normalisation

• NF F56-001:1985 Fixed railway equipment. Material for telecommunication and signalling overhead lines. Keying-plate and anchor-plate.
• NF EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: connectors for printed boards - Backplane connector for InfiniBand equipment
• NF E55-210:1976 Offset duplicators. Attachment features of plates.
• NF ISO 24334:2023 Laminate flooring - Determination of tensile strength of mechanically joined boards
• NF EN 61076-4-100:2002 Connectors for electronic equipment - Part 4-100: connectors for printed boards - Particular specification for two-piece connector modules for printed boards and backplanes, 2.5 mm pitch
• NF C93-406-4-115*NF EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115 : printed board connectors - Backplane connector for Infiniband equipment
• NF F56-337:1978 FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. ASSEMBLY PLATE FOR SMALL POLES AND CROSS-PIECES.
• NF ISO 1977:2006 Handling chains, attachment plates and toothed wheels
• NF P98-529:1991 Road traffic signs. Decors and traffic signs. In situ natural ageing method.
• NF EN 60603-9:1998 Connectors for frequencies below 3 MHz for use with printed boards - Part 9: connectors for pluggable printed boards, backplane connections and cable connectors, for 2.54 mm (0.1 in) base grid
• NF EN 12228:2013 Sports floors - Determination of joint strength
• NF EN 61076-4-111:2004 Connectors for electronic equipment - Part 4-111: connectors for printed boards under quality assurance - Particular specification for two-part power connector modules, for printed boards and rear panels...
• NF EN 61076-4-113:2005 Connectors for electronic equipment - Connectors for printed cards - Part 4-113: particular specification for two-part connectors having 5 rows with a pitch of 2.54 mm for printed cards pluggable into the backplane, in...

Defense Logistics Agency

• DLA MS24287 REV D VALID NOTICE 1-2013 Mated Assembly, Connector, Rack and Panel, Miniature
• DLA MS24287 REV D VALID NOTICE 2-2013 Mated Assembly, Connector, Rack and Panel, Miniature
• DLA A-A-59213 VALID NOTICE 1-2004 SPLICE CONNECTORS
• DLA A-A-59213-1998 SPLICE CONNECTORS
• DLA MS33651 REV B VALID NOTICE 2-2013 Boss and Installations - Air Connection
• DLA MIL-STD-1672 VALID NOTICE 2-2001 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
• DLA MIL-STD-1672-1975 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
• DLA MIL-STD-1672 VALID NOTICE 3-2006 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
• DLA MIL-STD-1672 VALID NOTICE 1-1991 CONNECTOR, UMBILICAL, INSERT ARRANGEMENTS
• DLA DSCC-DWG-04028-2004 CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 452 CONTACT POSITIONS
• DLA DSCC-DWG-85048 REV D-2006 CONNECTOR, ELECTRICAL, INSERT ARRANGEMENT, MINIATURE, SEVENTEEN SIZE 20 SIGNAL CONTACTS, WITH FOUR SIZE 8 CONTACT CAVITIES
• DLA DSCC-DWG-85054 REV D-2006 CONNECTOR, ELECTRICAL, INSERT ARRANGEMENT, MINIATURE, SEVENTEEN SIZE 20 SIGNAL CONTACTS, WITH SEVEN SIZE 8 CONTACT CAVITIES

Associação Brasileira de Normas Técnicas

• ABNT PB-681-1980 Railway signals. Complete driving signals. signal board

Society of Automotive Engineers (SAE)

• ADS AGS1694 Cleat, Wiring, No. 2
• SAE AGS1694-3-1944 AGS1694 Cleat, Wiring, No. 2
• SAE AGS1672-3 AGS1672 Cleats, Wiring. No.14 and No. 15
• SAE AGS1670-3-1940 AGS1670 Cleat, Wiring, Aluminium, No. 9
• SAE AGS1664-2 AGS1664 Cleat. Wiring, Porcelain, No. 3
• SAE AS2938-2-1941 AS2938 Base Plate - Stowage, Signal Lamp
• ADS AS2938 Base Plate - Stowage, Signal Lamp
• SAE AGS1671-3-2015 AGS1671 Cleats, Wiring, Aluminium Nos. 12 and 13
• SAE AS3078B Fitting, Insert, Fluid Connection, Ms33649 Boss to Ring Locked Boss
• SAE AS3078 Fitting, Insert, Fluid Connection, Ms33649 Boss to Ring Locked Boss
• SAE AGS1676-3-1940 AGS1676 Cleat, Wiring, Fibre, No. 4
• SAE AGS1668-3-2015 AGS1668 Cleat, Wiring, Aluminium, No. 10
• SAE AGS1673-3-2015 AGS1673 Cleat, Wiring, Fibre, No. 1
• SAE AGS1683-3-1940 AGS1683 Cleat, Wiring, Brass, No. 1
• SAE AGS1675-3-1940 AGS1675 Cleat, Wiring, Fibre, No. 3
• SAE AGS1674-3-1940 AGS1674 Cleat, Wiring, Fibre, No. 2
• SAE AS3078A Fitting, Insert, Fluid Connection, Ms33649 Boss to Ring Locked Boss
• SAE AGS1669-3-2015 AGS1669 Cleat, Wiring, Brass, No. 9
• SAE AGS1667-3-2015 AGS1667 Cleat, Wiring, Brass, No. 10
• SAE J1939/13_202408 Off-Board Diagnostic Connector
• SAE J1939/13_201610 Off-Board Diagnostic Connector
• SAE J1939/13_200403 Off-Board Diagnostic Connector
• SAE J1939/13_201110 Off-Board Diagnostic Connector
• SAE J1939/13_199907 Off-Board Diagnostic Connector
• SAE AS2938-2 AS2938 Base Plate - Stowage, Signal Lamp
• ADS AS2832 Link Plate (for Q and QK Harness)
• SAE AS2143-4 AS2143-2144 Harness Attachment Plate, 25g Seat
• SAE AS2143-4-1950 AS2143-2144 Harness Attachment Plate, 25g Seat
• SAE AS1887-3 AS1887 Spring Retaining Plate - Signal Cartridge Stowage
• SAE AS1887-3-1942 AS1887 Spring Retaining Plate - Signal Cartridge Stowage
• ADS AS2251 Spring Retaining Plate, Signal Cartridge Stowage
• SAE AS2251-3 AS2251 Spring Retaining Plate, Signal Cartridge Stowage
• SAE AS2251-3-1942 AS2251 Spring Retaining Plate, Signal Cartridge Stowage
• ADS AS1887 Spring Retaining Plate - Signal Cartridge Stowage
• SAE AS2832-2 AS2832 Link Plate (for Q and QK Harness)
• SAE AMS4460-2009 Aluminum Alloy, Clad Two Sides Sheet 0.6Mg 0.35Si 0.28Cu (No. 24 Brazing Sheet) As Fabricated

GCC Standardization Organization

• GSO IEC 61076-4-115:2014 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
• GSO IEC 61076-4-101:2014 Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917

American National Standards Institute （ANSI)

• ANSI/EIA 364-83A:2017 TP-83A Shell-To-Shell and Shell-To- Bulkhead Resistance Test Procedure for Electrical Connectors
• ANSI/EIA 406:1973 Connectors, Electrical, Printed-Wiring Board
• ANSI/EIA 616:1996 Two-Millimeter, Two-Part Connectors for Use with Printed Boards and Backplanes

Military Standards (MIL-STD)

• MIL MIL-A-17196E-1977 ALARM SWITCHBOARDS, ALARM PANELS, REMOTE SENTRY ALARM SWITCH, SIGNAL UNITS, & SPECIAL ALARM CONNECTION BOX, NAVAL SWITCHBOARD (SUPERSEDING MIL-A-17196D)

European Committee for Electrotechnical Standardization（CENELEC）

• EN 60603-9:1998 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 9: Two-Part Connectors for Printed Boards, Backpanels and Cable Connectors, Basic Grid of 2,54 mm (0,1 in)
• EN 60603-10:1998 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 10: Two-Part Connectors for Printed Boards for Basic Grid of 2,54 mm (0,1 in), Inverted Type
• EN 61076-4-115:2003 Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment
• EN 60603-5:1998 Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 5: Edge-Socket Connectors and Two-Part Connectors for Double-Sided Printed Boards with 2,54 mm (0,1 in) Spacing
• EN 61175:1993 Designations for Signals and Connections

Magyar Szabványügyi Testület

• MNOSZ 701-1951 Bearing inner bushings made of lead plate material, connecting bearings and connecting plates
• MSZ 2418-1982 Flow panel connector type B precise connection
• MSZ 6501-1962 Interpret names connected to templates
• MSZ 6784/4-1981 Cement-jointed wooden cutting board
• MSZ 13014/6.lap-1967 Building bracket components. Connection board

Aerospace Industries Association

• AIA NAS1892 Plate, Connector 1 ATR
• AIA NAS1876 Plate, Connector 1/4 ATR
• AIA NAS1880 Plate, Connector 3/8 ATR
• AIA NAS1888 Plate, Connector 3/4 ATR
• AIA NAS1884 Plate, Connector 1/2 ATR
• AIA NAS45 Panel Assembly - Electrical Connector
• AIA NAS1896 Plate, Connector 1 1/2 ATR
• AIA NAS20 Screw - Post, Connector Panel, Electrical
• AIA NAS17 Panel - Connector, Electrical, for #6 Posts

Swedish Institute for Standards

• SIS SEN 30 02 19 Connection sheet, 2, 5mm2, 380V
• SS-EN 61076-4-115:2004 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
• SIS SEN 30 02 93-1959 Indoor connection sheet, 2, 5mm, 380V
• SIS SEN 30 02 56-1959 Armature connection sheet. 2, 5mm2, 380 volts
• SIS 81 21 99-1971 Connectors for concrete sandwich panels
• SIS SS 11 21 70-1980 Butt welded joints — Plates and pipes — Tensile testing
• SIS SS 11 26 70-1980 Butt welded joints — Plates and pipes — Bend testing
• SS-EN 61076-4-100:2002 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
• SIS SEN 24 16 30-1960 TV signal connection. Steel signal cable. EKJR type
• SIS SEN 24 16 40-1960 TV signal connection, loop connecting cable, type RKXX
• SIS SEN 55 12 16-1966 Record system for internal telephone and signalling plants Terminal block card type 2
• SIS SEN 55 12 15-1966 Record system for internal telephone and signalling plants Teminal block card type 1

Japanese Industrial Standards Committee (JISC)

• JIS E 3602:1992 Signal bonds
• JIS C 0450:2004 Designations for signals and connections
• JIS F 3009:1996 Shipbuilding -- 5K and 10K deck and bulkhead pieces for pipe connection
• JIS E 3104:1994 Railway signal -- Connecting terminals
• JIS Z 3155:1993 Method of FISCO test
• JIS B 2313 AMD 1:2001 Steel plate butt-welding pipe fittings (Amendment 1)

Electronic Components, Assemblies and Materials Association

• ECA EIA-364-83-1999(R2007) TP-83 SHELL-TO-SHELL AND SHELL-TOBULKHEAD RESISTANCE TEST PROCEDURE FOR ELECTRICAL CONNECTORS
• IS-64-1991 2 Millimeter@ Two-Part Connectors for Use with Printed Boards and Backplanes
• 616-1996 2 Millimeter@ Two-Part Connectors for Use with Printed Boards and Backplanes

Danish Standards Foundation

• DANSK DS/EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
• DS/EN 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment

International Electrotechnical Commission (IEC)

• IEC 61175:1993 Designations for signals and connections
• IEC 61076-4-115:2003 Connectors for electronic equipment - Part 4-115: Printed board connectors; Backplane connector for InfiniBand equipment
• IEC PAS 61076-4-115:2001 Connectors for electronic equipment - Part 4-115: Printed board connectors - Detail specification for a single-part hybrid connector, with a section of high-speed differential pair connections, and a section of low-speed, power and ground connections betw
• IEC 60603-2:1980 Connectors for frequencies below 3 MHz for use with printed boards; part 2: two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in) with common mounting features
• IEC 61076-4-113:2002 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connector having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications

U.S. Military Regulations and Norms

• ARMY A-A-55586-1994 HINGE, BUTT-NARROW, NON-TEMPLATE
• ARMY MIL-T-13559 B-1973 TARGET, EQUIPMENT
• ARMY MIL-T-13559 B NOTICE 1-1996 TARGET, EQUIPMENT
• ARMY MS27958 REV B VALID NOTICE 2-2013 Hinge, Butt, Narrow and Broad, Template, Brass
• ARMY MIL-P-40061 B (1)-1985 PANEL MARKER, AERIAL LIAISON, VS-17/GVX
• ARMY MIL-P-40061 B-1970 PANEL MARKER, AERIAL LIAISON, VS-17/GVX
• ARMY MIL-P-40061 B VALID NOTICE 3-2000 PANEL MARKER, AERIAL LIAISON, VS-17/GVX
• ARMY MIL-P-40061 B NOTICE 4-2001 PANEL MARKER, AERIAL LIAISON, VS-17/GVX
• ARMY MIL-P-40061 B VALID NOTICE 1-1992 PANEL MARKER, AERIAL LIAISON, VS-17/GVX
• ARMY MIL-P-40061 B NOTICE 2-1995 PANEL MARKER, AERIAL LIAISON, VS-17/GVX
• ARMY MS27958 REV B VALID NOTICE 1-1999 HINGE, BUTT, NARROW AND BROAD, TEMPLATE, BRASS
• ARMY MS27956 REV B VALID NOTICE 1-1999 HINGE, BUTT, NARROW AND BROAD, TEMPLATE, STEEL
• ARMY MIL-P-13850 C VALID NOTICE 1-1992 PANEL MARKER, AERIAL LIAISON, COTTON SHEETING PANEL AL-121, WHITE AND PANEL AL-122, BLACK

The Directorate General of Specifications and Metrology (DGSM)

• OS GSO IEC 61076-4-115:2014 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment

Kingdom of Bahrain Testing and Metrology Directorate

• BH GSO IEC 61076-4-115:2016 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment

Bureau of Indian Standards

• IS/IEC 61076-4-115-2003 Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment

Korean Agency for Technology and Standards (KATS)

• KS B 1543-2015 Steel plate butt-welding pipe fittings
• KS B 1543-2009 Steel plate butt-welding pipe fittings
• KS C IEC 60603-5:2004 Connectors for frequencies below 3 MHz for use with printed boards-Part 5:Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm(0.1 in) spacing
• KS B 0525-1994(1999) METHOD OF WIDE PLATE TENSION TEST FOR BUTT WELDED JOINT
• KS C IEC 60603-5:2014 Connectors for frequencies below 3 MHz for use with printed boards — Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm(0.1 in) spacing
• KS C 8426-1988 Connecting boxes (for underfloor ducts)
• KS B 0525-2004 METHOD OF WIDE PLATE TENSION TEST FOR BUTT WELDED JOINT
• KS B 0525-1994 Method of wide plate tension test for butt welded joint

Spanish Association for Standardization (UNE)

• UNE-EN 61076-4-115:2003 Connectors for electronic equipment -- Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment (Endorsed by AENOR in December of 2003.)
• UNE-EN 61175:2001 Designation for signals and connections.

Comitato Elettrotecnico Italiano

• CEI EN 61076-4-115:2004 Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment

US Federal Contractor Registration (USFCR)

• FCR FED H-08-4 VOL 4-E-NC-10-1988 CODE "ONE" ANNUNCIATOR PANEL
• FCR FED H-08-4 VOL 4-E-P-8-1988 DETAIL SHOWING CONNECTION OF PANEL

Lithuanian Standards Office

• LST EN 61076-4-115-2004 Connectors for electronic equipment. Part 4-115: Printed board connectors. Backplane connector for InfiniBand equipment

British Standards Institution (BSI)

• BS 690-6:1976 Asbestos-cement slates and sheets - Fittings for use with corrugated sheets
• BS 689:1936 Railway mechanical signalling apparatus (signal posts semaphore signals, fittings and connections, and point connections and fittings.)
• BS EN 61076-4-115:2003 Connectors for electronic equipment - Printed board connectors with assessed quality - Backplane connector for InfiniBand equipment
• BS EN 60603-9:1998 Connectors for frequencies below 3 MHz for use with printed boards. Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
• BS EN 61076-4-103:1999 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm. Cable to board conn...
• BS EN 61175:1993 Designations for signals and connections
• BS EN IEC 62496-4-214:2020 Optical circuit boards - Interface standards. Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector

National Standardisation Body (ASRO)

• STAS SR ISO 3038:1993 Corrugated fibreboard. Determination of the water resistance of the glue bond by immersion

Austrian Standards

• ONORM V 2004-1999 Control panel for traffic light installations
• ONORM V 2005-1996 Traffic-signals - Control panels for pedestrians Installations de feu du trafic - Tableaux de commande pour pietons

Ente Nazionale Italiano di Unificazione

• UNI 2562:1944 Connecting hardware for naval use. Bracket connections with ring, to be riveted.

ADS

• ADS AS2143-2144 Harness Attachment Plate, 25g Seat

Yugoslav Association for Standardization

• JUS N.R4.705-1989 Connectors for frequencies below 3 MHz. Edge socket connectors having a contact spacihg of 3,96 mm mating either with board mounted connectors or printed wiring board]nitb edge board contacts. Climatic categorj 40/085/21
• JUS Z.C1.682-1989 Hose coupling for fire fighting. Blind coupling B
• JUS Z.C1.683-1989 Hose coupling for fire fighting. Blind coupling C

European Committee for Standardization (CEN)

• prEN 61175-1992 Designations for signals and connections

VMEbus International Trade Association (VITA)

• VITA 46.4-2012 PCI Express on VPX backplane connectors

Aerospace Industries Association/ANSI Aerospace Standards

• NAS1892-1989 Plate@ Connector 1 ATR (Rev 1)
• NAS1880-1989 Plate@ Connector 3/8 ATR (Rev 1)
• NAS1876-1989 Plate@ Connector 1/4 ATR (Rev 1)
• NAS1884-1989 Plate@ Connector 1/2 ATR (Rev 1)
• NAS1888-1989 Plate@ Connector 3/4 ATR (Rev 1)

Standard Association of Australia （SAA）

• AS 4446:1999 Manufacture of nailplate-joined timber products

Czech Standards Institute (UNMZ)

• CSN 49 0172-1966 Determination of tensile strength of a glue joint perpendicularly to the plane of a panel

Canadian Standards Association (CSA)

• CSA C22.2 No.203-M91-CAN/CSA-1991 Modular Wiring For Office Furniture Sheet No 1

American Society for Testing and Materials (ASTM)

• ASTM F1138-98 Standard Specification for Spray Shields for Mechanical Joints
• ASTM F1138-98(2003) Standard Specification for Spray Shields for Mechanical Joints

Others: Board-to-Board Signal Connections,Board-to-Board Connector,Board-to-Board Connector,How Board-to-Board Connectors Are Connected,How to connect the board-to-board connector,Board-to-Board Connector Specifications,board-to-board connection,How to fix the board-to-board connector