microresection device

microresection device, Total:217 items.

The international standard classification for "microresection device" includes: Dying and finishing equipment , Installations and equipment for waste disposal and treatment , Chemical laboratories. Laboratory equipment , Packaging machinery , Other equipment related to power transmission and distribution networks , Equipment for the metallurgical industry , Tobacco, tobacco products and related equipment .

The Chinese standard classification for "microresection device" includes: High voltage switchgear , Dyeing and finishing machinery and apparatus , Magnifier and microscope , Environmental protection equipment , Storage equipment and handling machinery , Basic laboratory equipment , Packaging tool , Relay protection and automatic device , Ingot and blank casting equipment , Office supplies and office implements , Tobacco curing machinery , Radio Measurement .

Professional Standard - Electricity

DL/T 624-2010 Technical specifications of test equipment based on micro-computer for protection equipment
DL/T 624-1997 Technical Specifications of Test Equipment Based on Micro-Computer for Relaying Protection
DL/T 624-2023 Technical conditions of microcomputer-based test equipment for relay protection
DL/T 744-2001 General specification for microprocessor-based motor protection equipment
DL/T 687-1999 General specification for prevent electric mal-operation device with computer
DL/T 1521-2016 Micron Grade Dry Fog Dust Removal Device in Coal-fired Power Plants

Professional Standard - Aviation

HBm 66.4-1987 Mini-truck - Heater
HB 4574.3-1992 Die safety control device Side cutting control micro switch device

Professional Standard - Electron

SJ 20643.2-2002 Detail specification for pulsed xenon lamp for ultraviolet-cut
SJ 20616-1996 Specification for pulsed xenon lamp for ultraviolet-cut

Group Standards of the People's Republic of China

T/QGCML 1811-2023 Slow wire cutting device and cutting control method
T/WZBF 062-2024 Electric low shear flow control device
T/CPSS 1006-2021 Technical Specification for low voltage Parallel Transfer Switch Type Voltage Sag Control Device
T/QGCML 4101-2024 Adjustable paper cutter pressure device
T/EJCCCSE 033-2024 Stage light automatic oil removal device
T/QGCML 1797-2023 Anti-static cutting device for release paper for sanitary napkins
T/QGCML 975-2023 Fuel tank degreasing device
T/QGCML 4386-2024 Environmental protection dechlorination automation device
T/CEAC 041-2024 Technical requirements for complete sets of microcomputer-based DC power supply for electric power
T/JSEE 003-2020 Test specification for miniature synchrophasor measurement device for distribution network
T/QGCML 3362-2024 Dust removal device for electrical appliance maintenance
T/QGCML 2382-2023 Laser pipe cutting machine guide wheel supporting device
T/SDAS 799-2024 Bio-IX integrated integrated nitrogen removal device
T/QGCML 3283-2024 Plastic plate cloak cutting device
T/LYGDL 001-2021 Deaerator waste heat recovery device
T/CIPR 083-2023 Mulberry leaf cutting device

Professional Standard - Textile

FZ/T 95022-2015 Starching,cutting and selvedge sucking devices

未注明发布机构

DIN EN 62047-1 E:2014-05 Semiconductor devices - Micro-electromechanical devices - Part 1: Terms and definitions
CSA P.15-2023 Test method for rating micro combined heat and power (mCHP) device
DIN EN 62047-25 E:2014-05 Semiconductor devices - Micro-electromechanical devices - Part 25: Silicon based MEMS fabrication technology - Measurement method of pull-press and shearing strength of micro bonding area

Professional Standard - Machinery

JB/T 10800-2007 Plastic cup forming-filling-sealing machine
JB/T 14497-2023 Collaborative deep desulfurization and PM control device
JB/T 10862-2008 Low-voltage control power supply for electrostatic precipitator
JB/T 7398.9-1994 Microscope - Radiography Facility
JB/T 7398.8-1994 Microscope - Projector
JB/T 7398.10-1994 Microscope - Dark Field Device
JB/T 10862-2023 Low-voltage control power supply for electrostatic precipitator
JB/T 7398.11-1994 Microscope - Phase Contrast Device

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 26994-2011 Plastic cup forming filling sealing machine
GB/T 26814-2011 Microwave digestion equipment
GB/T 14598.301-2010 General specification of transformer fault oscillograph equipment for microprocessor-based generator

Professional Standard - Environmental Protection Certification Specification

HCRJ 012-1998 Wet flue-gas desulphurization&precipitator device
HCRJ 032-1998 Microporous filter

Heilongjiang Provincial Standard of the People's Republic of China

DB23/T 1532-2013 Technical basic requirements for ultra-large air flotation microvibration isolation device

工业和信息化部/国家能源局

JB/T 13243-2017 Wet electrostatic precipitator spray device
JB/T 13558-2018 Ultra long bag pulse-jet bag filter

Professional Standard - Medicine

YY/T 0857-2011 Standard test methods for spinal implant constructs in a vertebrectomy model

Professional Standard - Non-ferrous Metal

YS/T 851-2023 Equipment specification for aluminium and aluminium alloys melt degassing and filtering system on-line
YS/T 851-2012 Technical Specification for On-line Rotating Degassing System Used for Aluminium and Aluminium Alloy Melts

Professional Standard - Education

JY/T 0376-2004 Demonstrating apparatus for microscopic biology

Professional Standard - Tobacco

YC/T 489-2014 Determination Method for Eliminating Rate of Foreign Body Eliminating Device

National Metrological Verification Regulations of the People's Republic of China

JJG 362-1984 for Model DO16 UHF Microvolt Voltage Calibrating Equipment

RU-GOST R

GOST 1.0-1992 Interstate system for standardization. Basic principles
GOST 24460-1980 Intergated microcircuits for digital devices. Basic parameters
GOST 23484-1979 Electrohydraulic-plants for removing of cores. Technical requirements
GOST 25998-1983 Electrohydraulic plants for removal of cores. Types, basic parameters and dimensions

SCC

CAN/ULC-S523-M91-1991 Standard for Light Attack Fire Fighting Apparatus (Mini-Pumper)
ULC 523-1997 Standard for Light Attack Fire Fighting Apparatus (Mini-Pumper) (CAN/ULC S523)
DIN 58865 E:2012 Draft Document - Medical instruments - Resection knives type Langenbeck
CAN/CSA-C22.2 No.80601-2-58-2010 Medical electrical equipment — Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
UNE-EN 80601-2-58:2009 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
DANSK DS/EN 80601-2-58:2015 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
AENOR UNE-EN 80601-2-58/A11:2009 Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens extraction devices and vitrectomy devices for ophthalmic surgery
DANSK DS/EN 80601-2-58/A1:2019 Medical electrical equipment – Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
AENOR UNE-EN 80601-2-58:2009 Electromedical equipment. Part 2-58: Particular requirements for basic safety and essential performance of lens extraction devices and vitrectomy devices for ophthalmic surgery
BS 1428-A1:1958 Microchemical apparatus. Combustion trains for the determination of elements-Specification for carbon and hydrogen combustion train (Pregl type)
JIS B 8228:2020 Application and installation of safety devices excluding stand-alone bursting disc safety devices
BS 1428-A2:1959 Microchemical apparatus. Combustion trains for the determination of elements-Specification for nitrogen combustion train (micro-Dumas)
AS 3012:1990 Electrical installations - Construction and demolition sites
ASME PTC 39.1-1980(R1991) Condensate Removal Devices for Steam Systems
DIN EN 80601-2-58 E:2013 Draft Document - Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (IEC 62D/1037/CD:2012)
BS 1428-A4:1953 Microchemical apparatus. Combustion trains for the determination of elements. Specification for halogens and sulphur combustion train (micro-Grote)
DIN EN IEC 80601-2-58 E:2022 Draft Document - Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (IEC 62D/1914/CD:2021); Text in German and English
IEC 60927:1996+AMD1:1999 CSV Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
CEI EN 60927:2008 Auxiliaries for lamps - Starting devices (other than glow starters) Performance requirements
CEI EN 60927/A1:2008 Auxiliaries for lamps - Starting devices (other than glow starters) Performance requirements
BS 1428-A4:1960 Microchemical apparatus. Combustion trains for the determination of elements-Specification for halogens and sulphur combustion train (micro-Grote)
NS-EN 14887:2005 Glass packaging — Cork removal devices — General requirements
IEC 60927:1996+AMD1:1999+AMD2:2004 CSV Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
DANSK DS/EN 60927/A1:2007 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
DANSK DS/EN 60927:2007 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
DANSK DS/EN 14887:2005 Glass packaging - Cork removal devices - General requirements
AWWA WQTC52883 Elimination of Acid Injection in Reverse Osmosis Plants
MIL MIL-T-85236-1978 TEST SET, SWITCHING UNIT TS-3634/ARM
DIN 13189 E:2008 Draft Document - Medical instruments - Laminectomy punches type Ferris-Smith-Kerrison

American Society of Mechanical Engineers (ASME)

ASME A112.14.4-2001(R2017) Grease Removal Devices
ASME A112.14.4/CSA B481.5-2022 Grease Removal Devices
ASME A112.14.4-2001 Grease Removal Devices
ASME PTC 39.1-1980 Condensate removal devices for steam systems

British Standards Institution (BSI)

ASME A112.14.4-2022*CSA B481.5-22 Grease Removal Devices
BS EN 62047-1:2006 Semiconductor devices - Micro-electromechanical devices - Terms and definitions
BS EN 62047-1:2016 Semiconductor devices. Micro-electromechanical devices. Terms and definitions
BS EN 62047-10:2011 Semiconductor devices. Micro-electromechanical devices. Micro-pillar compression test for MEMS materials
BS EN 62047-25:2016 Semiconductor devices. Micro-electromechanical devices. Silicon based MEMS fabrication technology. Measurement method of pull-press and shearing strength of micro bonding area
BS EN 80601-2-58:2009 Medical electrical equipment - Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
BS EN 80601-2-58:2009+A11:2011 Medical electrical equipment. Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
BS EN 80601-2-58:2015+A1:2019 Medical electrical equipment. Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
BS EN 80601-2-58:2015 Medical electrical equipment. Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
BS EN 62047-13:2012 Semiconductor devices. Micro-electromechanical devices. Bend-and shear-type test methods of measuring adhesive strength for MEMS structures
BS EN 62047-20:2014 Semiconductor devices. Micro-electromechanical devices. Gyroscopes
BS EN 60794-5:2007 Optical fibre cables. Sectional specification. Microduct cabling for installation by blowing
BS EN 62047-11:2013 Semiconductor devices. Micro-electromechanical devices. Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems
BS EN 62047-19:2013 Semiconductor devices. Micro-electromechanical devices. Electronic compasses
BS EN 62047-5:2011 Semiconductor devices. Micro-electromechanical devices. RF MEMS switches
BS ISO 7588-3:1998 Road vehicles. Electrical/electronic switching devices. Microrelays
BS EN 62047-14:2012 Semiconductor devices. Micro-electromechanical devices. Forming limit measuring method of metallic film materials
22/30435087 DC BS EN 80601-2-58. Medical electrical equipment - Part 2-58. Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
BS EN 62047-4:2010 Semiconductor devices. Micro-electromechanical devices. Generic specification for MEMS
BS 7944:1999 Type 1 heavy duty fire blankets and type 2 heavy duty heat protective blankets
15/30325602 DC BS EN 80601-2-58 AMD1. Medical electrical equipment. Part 2-58. Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

American National Standards Institute （ANSI)

ANSI/ASME A112.14.4-2001 Grease Removal Devices
ANSI/AAMI/IEC 80601-2-58:2008 Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy device for ophthalmic surgery

US-FCR

FCR FED H-08-4 VOL 4-E-SS-17-1988 TYPICAL BEDSIDE UNIT (ALL PBPU'S EXCEPT SERIES 3)

European Committee for Electrotechnical Standardization（CENELEC）

EN 62047-13:2012 Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear - type test methods of measuring adhesive strength for MEMS structures
EN 80601-2-58:2015/A1:2019 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
FprEN IEC 80601-2-58:2023 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
EN 80601-2-58:2015 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
EN 62047-10:2011 Semiconductor devices - Micro-electromechanical devices - Part 10: Micro-pillar compression test for MEMS materials

Military Standards (MIL-STD)

DOD A-A-54802-1993 FORCEPS, HYSTERECTOMY, SLIGHTLY CURVED, PARAMETRIUM
DOD A-A-54780-1993 SCISSORS, HYSTERECTOMY (SLIGHTLY CURVED, CURVED, STRONGLY CURVED, PARAMETRIUM)
DOD A-A-54222-1990 WATER BATH, ELECTRIC (MICROTOME TISSUE SPECIMEN SECTION MOUNTING)

Japanese Industrial Standards Committee (JISC)

JIS C 5630-1:2008 Semiconductor devices -- Micro-electromechanical devices -- Part 1: Terms and definitions
JIS C 5630-1:2017 Semiconductor devices -- Micro-electromechanical devices -- Part 1: Terms and definitions
JIS C 5630-13:2014 Semiconductor devices.Micro-electromechanical devices.Part 13: Bend-and shear-type test methods of measuring adhesive strength for MEMS structures
JIS C 5630-20:2015 Semiconductor devices -- Micro-electromechanical devices -- Part 20: Gyroscopes

Association Francaise de Normalisation

NF C96-050-1:2006 Semiconductor devices - Micro- electromechanical devices - Part 1 : terms and definitions.
NF C96-050-1*NF EN 62047-1:2016 Semiconductor devices - Micro-electromechanical devices - Part 1 : terms and definitions
NF E64-610*NF EN 12779:2016 Safety of woodworking machines - Chips and dust extraction systems with fixed installations - Safety requirements
NF C74-395/A11:2012 Medical electrical equipment - Part 2-58 : particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery.
NF U25-513*NF ISO 8380:1994 Forestry machinery. Portable brush-cutters and grass-trimmers. Cutting attachment guard strength.
NF EN 12779:2016 Safety of woodworking machines - Fixed chip and dust extraction installations - Safety requirements
NF C96-313:1989 Microwave devices. Microwave amplifiers.
NF C74-395/A1*NF EN 80601-2-58/A1:2019 Medical electrical equipment - Part 2-58 : particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
NF EN 80601-2-58/A1:2019 Electrical medical devices - Part 2-58: particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
NF EN 80601-2-58:2015 Electrical medical devices - Part 2-58: particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
NF C96-050-13*NF EN 62047-13:2012 Semiconductor devices - Micro-electromechanical devices - Part 13: bend- and shear- type test methods of measuring adhesive strenght for MEMS structures
NF C96-050-11*NF EN 62047-11:2014 Semiconductor devices - Micro-electromechanical devices - Part 11 : test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems
NF U25-512*NF ISO 7918:1996 Forestry machinery. Portable brush-cutters and grass-trimmers. Cutting attachment guard dimensions.
NF C96-050-2*NF EN 62047-2:2006 Semiconductor devices - Micro-electromechanical devices - Part 2 : tensile testing methods of thin film materials.
NF C96-050-20*NF EN 62047-20:2014 Semiconductor devices - Micro-electromechanical devices - Part 20 : gyroscopes
NF C71-386-208*NF EN 62386-208:2009 Digital addressable lighting Interface - Part 208 : particular requirements for control gear - Switching function (device type 7)
NF C15-476:1991 Low Voltage Electrical Installations Isolation and Switching
NF EN 60927/A1:2014 Auxiliary devices for lamps - Starting devices (other than glow starters) - Performance requirements
NF C93-850-5:2007 Optical fibre cables - Part 5 : sectional specification - Microduct cabling for installation by blowing.
NF C96-050-19*NF EN 62047-19:2014 Semiconductor devices - Micro-electromechanical devices - Part 19 : electronic compasses

Defense Logistics Agency

DLA SMD-5962-90946 REV D-1996 MICROCIRCUIT, DIGITAL, 32-BIT MICROPROCESSOR, FLOATING POINT UNIT AND MEMORY MANAGEMENT UNIT, MONOLITHIC SILICON
DLA MS24698 REV A-2005 RETAINER, CONNECTOR, RACK AND PANEL, MINIATURE
DLA MS24696 REV A-2005 RETAINER, CONNECTOR, RACK AND PANEL, MINIATURE
DLA MS24697 REV A-2005 RETAINER, CONNECTOR, RACK AND PANEL, MINIATURE
DLA SMD-5962-95588 REV B-2008 MICROCIRCUIT, MEMORY, DIGITAL, CMOS, ELECTRICALLY ERASABLE PROGRAMMABLE LOGIC DEVICE, MONOLITHIC SILICON
DLA SMD-5962-86050-1986 MICROCIRCUITS, DIGITAL, PROGRAM CONTROL UNIT/PUSH-POP STACK, MONOLITHIC SILICON
DLA SMD-5962-94762 REV A-2002 MICROCIRCUIT, MEMORY, DIGITAL, CMOS, ELECTRICALLY ERASABLE PROGRAMMABLE LOGIC DEVICE, MONOLITHIC SILICON
DLA SMD-5962-95587 REV A-2002 MICROCIRCUIT, MEMORY, DIGITAL, CMOS, ELECTRICALLY ERASABLE PROGRAMMABLE LOGIC DEVICE, MONOLITHIC SILICON
DLA SMD-5962-94760 REV A-2002 MICROCIRCUIT, MEMORY, DIGITAL, CMOS, ELECTRICALLY ERASABLE PROGRAMMABLE LOGIC DEVICE, MONOLITHIC SILICON
DLA SMD-5962-94763 REV A-2002 MICROCIRCUIT, MEMORY, DIGITAL, CMOS, ELECTRICALLY ERASABLE PROGRAMMABLE LOGIC DEVICE, MONOLITHIC SILICON
DLA SMD-5962-95588 REV A-2002 MICROCIRCUIT, MEMORY, DIGITAL, CMOS, ELECTRICALLY ERASABLE PROGRAMMABLE LOGIC DEVICE, MONOLITHIC SILICON
DLA SMD-5962-86718 REV B-2002 MICROCIRCUIT, DIGITAL, BIPOLAR, FOUR-BIT SHIFTER, MONOLITHIC SILICON
DLA SMD-5962-84056 REV F-2009 MICROCIRCUIT, DIGITAL, HIGH-SPEED CMOS, DUAL D-TYPE FLIP-FLOP WITH CLEAR AND PRESET, MONOLITHIC SILICON
DLA DSCC-DWG-85043 REV D-2006 CONNECTOR, ELECTRICAL, INSERT ARRANGEMENT, MINIATURE, FIVE SIZE 8 CONTACT CAVITIES

International Electrotechnical Commission (IEC)

IEC 62047-1:2005 Semiconductor devices - Micro-electromechanical devices - Part 1: Terms and definitions
IEC 62047-1:2016 Semiconductor devices - Micro-electromechanical devices - Part 1: Terms and definitions
IEC 80601-2-58:2014 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
IEC 62047-13:2012 Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear-type test methods of measuring adhesive strength for MEMS structures
IEC 80601-2-58:2014/AMD1:2016 Amendment 1 - Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
IEC 62047-11:2013 Semiconductor devices - Micro-electromechanical devices - Part 11: Test method for coefficients of linear thermal expansion of free-standing materials for micro-electromechanical systems
IEC 62047-2:2006 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials
IEC 62047-20:2014 Semiconductor devices - Micro-electromechanical devices - Part 20: Gyroscopes
IEC 62047-14:2012 Semiconductor devices - Microelectromechanical devices - Part 14: Forming limit measuring method of metallic film materials

Korean Agency for Technology and Standards (KATS)

KS C 8327-1990 Low-voltage cut outs
KS C IEC 60615:2013 Terminology for microwave apparatus
KS P ISO 8835-3:2009 Inhalational anaesthesia systems－Part 3：Transfer and receiving systems of anaesthetic gas scavenging systemss
KS C 7511-1987 Miniature lamps for decorative purposes
KS L 2300-2021 Piston operation micro-volumetric apparatus

PL-PKN

PN M34140-10-1987 Installations tor the water treatment Installations for the oil removing Re?uirements and tests
PN M66205-1991 Press tools. Scrap cutters

GSO

NB/T 11437-2023 Voltage conversion and protection device for explosion-proof iron remover for mining
BH GSO IEC 80601-2-58:2016 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
OS GSO IEC 80601-2-58:2013 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

International Organization for Standardization (ISO)

IEC/FDIS 80601-2-58:2011 Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
IEC/DIS 80601-2-58 Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
IEC 80601-2-58:2008 Medical electrical equipment - Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

Lithuanian Standards Office

LST EN 80601-2-58-2009/A11-2012 Medical electrical equipment -- Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
LST EN 80601-2-58-2009 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (IEC 80601-2-58:2008)
LST EN 80601-2-58-2015 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (IEC 80601-2-58:2014)
LST EN 14887-2005 Glass packaging - Cork removal devices - General requirements

CENELEC - European Committee for Electrotechnical Standardization

EN 80601-2-58:2009 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

Danish Standards Foundation

DS/EN 80601-2-58/A11:2011 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
DS/EN 80601-2-58:2009 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
DS/EN 14887:2006 Glass packaging - Cork removal devices - General requirements

ES-UNE

UNE-EN 80601-2-58:2015 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (Endorsed by AENOR in July of 2015.)
UNE-EN 80601-2-58:2015/A1:2019 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (Endorsed by Asociación Española de Normalización in October of 20...
UNE-EN 60927:2008 CORR:2009 Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements

BE-NBN

NBN E 29-404-1983 Automatic water vapor removal device. Classification

IN-BIS

IS 8734-1978 Specification for forceps for cutting and removing large specimens, Chevalier Jackson model
IS 6279-1971 Equipment Specifications for Sand Removal Units

German Institute for Standardization

DIN EN 62047-1:2006 Semiconductor devices - Micro-electromechanical devices - Part 1: Terms and definitions (IEC 62047-1:2005); German version EN 62047-1:2006
DIN EN 62047-2:2007 Semiconductor devices - Micro-electromechanical devices - Part 2: Tensile testing method of thin film materials (IEC 62047-2:2006); German version EN 62047-2:2006
DIN EN 14887:2006-01 Glass packaging - Cork removal devices - General requirements; German version EN 14887:2005
DIN EN 60794-5:2008 Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing (IEC 60794-5:2006); German version EN 60794-5:2007

Society of Automotive Engineers (SAE)

SAE AS6173/1-2014 CUTTING TOOL (MINIATURE) ELECTRICAL, WIRE CUTTING, HAND ACTUATED, TYPE I, WIRE SIZES 26 THROUGH 16

SAE - SAE International

SAE AS6173/1A-2019 CUTTING TOOL (MINIATURE) ELECTRICAL@ WIRE CUTTING@ HAND ACTUATED@ TYPE I@ WIRE SIZES 26 THROUGH 16

Canadian Standards Association (CSA)

CAN/CSA-C22.2 NO.80601-2-58-2015 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (Second Edition)

Standard Association of Australia （SAA）

AS 4632:2020 Over-pressure and under-pressure shut-off devices
AS 4632:2005 Over-pressure and under-pressure cut off devices
AS/NZS 3012:2010 Electrical installation construction and demolition sites
AS/NZS 3012:2019 Electrical installations — Construction and demolition sites
AS/NZS 3012:1995 Electrical installations - Construction and demolition sites

CZ-CSN

CSN 24 4121-1952 Clamping of workpieces. Revolving indexing head, one-stand, with worm gear drive

Canadian General Standards Board （CGSB)

CGSB 72.28-M88-CAN/CGSB-1988 Setting Up and Maintaining Micrographic Units

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0750-2-58-2015 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (IEC 80601-2-58:2014); German version EN 80601-2-58:2015

VN-TCVN

TCVN 4199-1995 Construction earth.Determination of shear resistance by box.shear devices

GOSTR

GOST R 57897-2017 Units for ceramic core’s removal. General requirements

CH-SNV

VSM 10336.6-1939 Cut-off device for pressure gauges

National Sanitation Foundation (NSF)

NSF P231-2003 Microbiological Water Purifiers

IEC - International Electrotechnical Commission

IEC 80601-2-58:2016 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (Edition 2.1; Consolidated Reprint)

Indonesia Standards

SNI 05-3306-1994 Workpiece ejector for cutting tools used in stamping practice

AENOR

UNE-EN 14887:2006 Glass packaging - Cork removal devices - General requirements

Others: Semiconductor devices. Microelectromechanical devices. Part 14:,Semiconductor devices. Microelectromechanical devices. Bending test methods for thin film materials,microresection device,Micro Gas Chromatography Device,microfabrication device,micro filter