temperature at tg

temperature at tg, Total:179 items.

The international standard classification for "temperature at tg" includes: Powder metallurgy , Rubber , Plastics in general , Medical Sciences and health care facilities in general .

The Chinese standard classification for "temperature at tg" includes: Metal physical property test method , Rubber products in general , Basic standards and general methods for synthetic resin and plastic , Medical science .

未注明发布机构

DVS 2201-1 BBL05:2006-10 Service life temperature time limits due to thermal ageing
DVS 2201-1 Beiblatt 5:2020-01 Service life temperature time limit due to thermal aging

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 40380.2-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 2: Determination of flow rate at elevated temperatures
GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures
GB/T 7287.4-1987 Measuring method for temperature rise time and fall time of infrared heater
GB/T 2941-1991 Standard temperature, humidity and time for environmental regulation and testing of rubber samples
GB/T 7142-2002 Determination of time-temperature limits for plastics after prolonged exposure to heat

Group Standards of the People's Republic of China

T/CAME 37-2021 Technical requirement of temperature and humidity real-time monitoring system for baby incubator
T/JLA 004-2023 Calibration method for temperature and time parameters of washer-disinfector

British Standards Institution (BSI)

BS 1041-7:1964 Code for temperature measurement-Temperature/time indicators
BS EN 1252-1:1998 Cryogenic vessels. Materials. Toughness requirements for temperatures below -80 C
BS 7908:1999 Packaging - Temperature and time-temperature indicators - Performance specification and reference testing
19/30388641 DC BS ISO 4664-3. Rubber, vulcanized or thermoplastic. Determination of dynamic properties. Part 3. Glass transition temperature (Tg)
BS 1041-7:1988(1999) Temperature measurement — Part 7 : Guide to selection and use of temperature / time indicators
BS 1041-7:1988 Temperature measurement - Guide to selection and use of temperature/time indicators
BS ISO 4076:2025 Polyphenylsulfone (PPSU). Effect of time and temperature on expected strength
BS EN ISO 2578:1999 Plastics. Determination of the time-temperature limits after prolonged exposure to heat
BS ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
04/30125959 DC ISO 24033. Pipes made of raised-temperature-resistance polyethylene (PE-RT). Effect of time and temperature on the expected strength
07/30154523 DC BS ISO 24033. Polyethylene of raised-temperature- resistance (PE-RT). Pipes. Effect of time and temperature on the expected strength
24/30490365 DC BS ISO 4075. Polysulfone (PSU). Effect of time and temperature on expected strength
24/30483744 DC BS ISO 24033 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
BS PD ISO/TS 13471-2:2022 Acoustics. Temperature influence on tyre/road noise measurement-Correction for temperature when testing with the pass-by methods
24/30486234 DC BS ISO 4076 Polyphenylsulphone (PPSU) - Effect of time and temperature on expected strength
BS ISO 12230:2012 Polybutene-1 (PB-1) pipes. Effect of time and temperature on the expected strength
PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement. Correction for temperature when testing with the CPX method
BS PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement-Correction for temperature when testing with the CPX method
08/30190962 DC BS ISO 3213. Polypropylene (PP) pipes. Effect of time and temperature on expected strength
BS 903-A35:1985 Physical testing of rubber-Temperatures, humidities and times for conditioning and testing of test pieces
24/30490362 DC BS ISO 4070. Polyvinylidene fluoride (PVDF). Effect of time and temperature on expected strength
BS 903-A35:1995 Physical testing of rubber-Temperatures, humidities and times for conditioning and testing of test pieces
PD ISO/TS 13471-2:2022 Acoustics — Temperature influence on tyre/road noise measurement Part 2: Correction for temperature when testing with the pass-by methods

CZ-CSN

CSN ON 25 8012-1964 Thermometer and thermometer time constants
CSN 64 0768-1982 Determination of time - emperature limits
CSN 34 6552 Cast.1-1976 Insulating sleevings and tubings used at temperatures 105 °C, Type 042
CSN 34 6552 Cast.3-1976 Insulating sleevings and tubings used at temperatures 105 °C, Type 312
CSN 64 0533-1993 Plastics. Determination of Polypropylene Solubility in P-xylene at Standard Temperature of 23 °C

Gosstandart of Russia

GOST 21727-1976 Water. Viscosity of water at 20 °C
GOST R IEC 811-5-1-1995 Test methods specific to filling compounds of electric cables. Drop-point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at temperature 23 °C. D.c. resistivity at temperature 23 °C and 1
GOST 8.188-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means of measuring magnetic induction of constant field in the range of 2-10 T for temperature range from 4,2 to 300 K and from 0,1 up to

International Organization for Standardization (ISO)

ISO 4664-3:2021 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 3: Glass transition temperature (Tg)
ISO 2578:1974 Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
ISO/CD 4075 Polysulfone (PSU) — Effect of time and temperature on expected strength
ISO/CD 4076 Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength
ISO 471:1977 Title missing - Legacy paper document
ISO 4076:2025 Polyphenylsulfone (PPSU) — Effect of time and temperature on expected strength
ISO 471:1995 Rubber - Temperatures, humidities and times for conditioning and testing
ISO 24033:2006 Pipes made of raised-temperature-resistance polyethylene (PE-RT) - Effect of time and temperature on the expected strength
ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
ISO 3213:2009 Polypropylene (PP) pipes - Effect of time and temperature on the expected strength
ISO 3213:1996 Polypropylene (PP) pipes - Effect of time and temperature on expected strength
ISO 12230:1996 Polybutene (PB) pipes - Effect of time and temperature on the expected strength
ISO 3384:1986 Rubber, vulcanized; Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO/CD 4070 Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength
ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
ISO 10146:1997 Crosslinked polyethylene(PE-X)pipes - Effect of time and temperature on the expected strength
ISO 471:1983 Rubber; Standard temperatures, humidities and times for the conditioning and testing of test pieces

Association Francaise de Normalisation

NF T46-026-3*NF ISO 4664-3:2021 Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 3 : glass transition temperature (Tg)
NF ISO 4664-3:2021 Vulcanized or thermoplastic rubber - Determination of dynamic properties - Part 3: glass transition temperature (Tg)
NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
NF E86-506-1:1998 Cryogenic vessels. Materials. Part 1 : toughness requirements for temperatures below minus 80 degrees Celsius.
NF EN ISO 2578:1998 Plastics - Determination of time-temperature limits after exposure to prolonged action of heat
NF T51-000:1978 Plastics. Preferred scales of temperatures and test durations.
NF E18-100:2013 Time-temperature indicators and integrators - Tests and performance

American Society for Testing and Materials (ASTM)

ASTM F1416-96 Standard Guide for Selection of Time-Temperature Indicators
ASTM F1416-96(2003) Standard Guide for Selection of Time-Temperature Indicators
ASTM RR-D30-1004 2007 D7028-Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM F1416-96(2019) Standard Guide for Selection of Time-Temperature Indicators
ASTM STP 325-1962 STRESS-STRAIN-TIME-TEMPERATURE RELATIONSHIPS IN MATERIALS
ASTM F1416-96(2014) Standard Guide for Selection of Time-Temperature Indicators
ASTM D7028-07(2015) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D7028-07(2024) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM F1416-96(2008) Standard Guide for Selection of Time-Temperature Indicators
ASTM E307-72(1996)e1 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM E307-72(2002) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM D6207-03(2007) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-03 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-97 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D6207-97(2003) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D2219-21 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 ��C Operation
ASTM E307-72(2014) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM E307-72(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
ASTM D2219-97 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60176C Operation
ASTM D7426-08 Standard Test Method for Assignment of the DSC Procedure for Determining T _g of a Polymer or an Elastomeric Compound
ASTM D7426-08(2013) Standard Test Method for Assignment of the DSC Procedure for Determining T g of a Polymer or an Elastomeric Compound

ESDU - Engineering Sciences Data Unit

ESDU 89023-1989 Temperatures in plates subjected to a recovery temperature varying linearly with time.

Association of German Mechanical Engineers

VDI VDE 3522-1987 Time response of contact thermometers
VDI/VDE 3522-1987 Time response of contact thermometers
VDI/VDE 3522-1981 Zeitverhalten von Beruehrungsthermometern
VDI/VDE 3522 BLATT 2-2014 Time behavior of contact thermometers — Experimental determination of time percentage values
DVS 2201-1 Beiblatt 5-2006 Service life temperature time limits due to thermal ageing

GCC Standardization Organization

GSO ISO 2578:2015 Plastics -- Determination of time-temperature limits after prolonged exposure to heat
GSO ISO 24033:2013 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
GSO ISO 3213:2015 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength
GSO ISO 12230:2015 Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength
GSO ISO 10146:2013 Cross linked polyethylene (PE-X) pipes - Effect of time and temperature on the expected strength

Korean Agency for Technology and Standards (KATS)

KS M ISO 2578-2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS M ISO 2578:2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
KS M ISO 471:2011 Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 471-2011 Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 471-2002(2007) Rubber－Temperature, humidities and times for conditioning and testing
KS M ISO 2578-2007(2017) Plastics－Determination of time－temperature limits after prolonged exposure to heat
KS M ISO 10146-2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS M ISO 10146:2004 Crosslinked polyethylene(PE-X) pipes－Effect of time and temperature of the expected strength
KS M ISO 10146:2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS C IEC 61224:2012 Nuclear reactors－Response time in resistance temperature detectors(RTD)－In situ measurements
KS I ISO TS 13471-1-2023 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method
KS M ISO 3384:2007 Rubber, vulcanized or thermoplastic-Determination of stress relaxation in compression at ambient and at elevated temperatures
KS M ISO 3384:2014 Rubber, vulcanized or thermoplastic-Determination of stress relaxation in compression at ambient and at elevated temperatures

German Institute for Standardization

DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998
DIN 53446:1962 Testing plastics. Determining temperature-time limits
DIN 51515-2 E:2008 Draft Document - Lubricants and governor fluids for turbines - Minimum requirements - Part 2: Turbine oils TG for higher temperature service
DIN 51515-2:2004 Lubricants and governor fluids for turbines - Part 2: L-TG for higher temperature service, Specifications
DIN EN ISO 2578 19987-10 Determination of the time-temperature limits of plastics after prolonged exposure to heat (ISO 2578: 1993)
DIN 51515-2:2010 Lubricants and governor fluids for turbines - Minimum requirements - Part 2: Turbine oils TG for high temperature service
DIN EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998

Danish Standards Foundation

DANSK DS/EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat
DS/EN ISO 2578:1999 Plastics - Determination of time-temperature limits after prolonged exposure to heat
DANSK DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
DS/ISO 3384:1989 Rubber, vulcanized. Determination of stress relaxation in compression at ambient and at elevated temperatures
DANSK DS/ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
DS/ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
DS/ISO 471:1985 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces

Society of Automotive Engineers (SAE)

SAE AMS7287-2012 Fluorocarbon Elastomer (FKM) High Temperature / HTS Oil Resistant Low Compression Set / 70 to 80 Hardness, Low Temperature Tg -22 °F (-30 °C) For Seals in Oil / Fuel / Specific Hydraulic Systems
SAE AMS7361A Rubber: Ethylene Propylene (EP) Phosphate Ester Resistant, Low Temperature Tg -67 °F (-55 °C), 75 to 85 Type M Hardness for Seals in Hydraulic Systems
SAE AMS7361B Rubber: Ethylene Propylene (EP), Phosphate Ester Resistant, Low Temperature Tg -67 °F (-55 °C), 75 to 85 Type M Hardness for Seals in Hydraulic Systems
SAE AMS7287A Fluorocarbon Elastomer (FKM), High Temperature/HTS Oil Resistant/Fuel Resistant, Low Compression Set/70 to 80 Hardness, Low Temperature Tg -22 °F (-30 °C), for Seals in Oil/Fuel/Specific Hydraulic Sys
SAE AMS7361B-2023 Rubber: Ethylene Propylene (EP) Phosphate Ester Resistant Low Temperature Tg -67 °F (-55 °C), 75 to 85 Type M Hardness for Seals in Hydraulic Systems
SAE AS4851A-2005 Relative Thermal Life and Temperature Index for Insulated Electric Wire
SAE AIR4279A-2012 Heat Up Time
SAE AMS7287 Fluorocarbon Elastomer (FKM) High Temperature / HTS Oil Resistant / Fuel Resistant Low Compression Set / 70 to 80 Hardness, Low Temperature Tg -22 °F (-30 °C) For Seals in Oil / Fuel / Specific Hydrau
SAE AMS7361A-2022 Rubber: Ethylene Propylene (EP) Phosphate Ester Resistant Low Temperature Tg -67 °F (-55 °C), 75 to 85 Type M Hardness for Seals in Hydraulic Systems
SAE AMS7287A-2022 Fluorocarbon Elastomer (FKM) High Temperature/HTS Oil Resistant/Fuel Resistant Low Compression Set/70 to 80 Hardness, Low Temperature Tg -22 °F (-30 °C), for Seals in Oil/Fuel/Specific Hydraulic Systems

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE 3817-1994 Time-Temperature-Humidity Relations for the Storage of Fresh Commodities

Malaysia Standards

MS 1523-2001 Rubber-Temperatures,Humidities and times for conditioning and testing

Swedish Institute for Standards

SS-ISO 471:1995 Rubber - Temperaures, humidities and times for conditioning and testing
SS-ISO 4664-3:2021 Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 3: Glass transition temperature (Tg) (ISO 4664-3:2021, IDT)
SS-ISO 11358-2:2005 Plastics - Thermogravimetry (TG) of polymers - Part 2: Determination of activation energy
SS-EN ISO 1893:2008 Refractory products - Determination of refractoriness under load - Differential method with rising temperature (ISO 1893:2007)
SS-ISO 24033:2006 Pipes made of raised-temperature-resistance polyethylene (PE-RT) - Effect of time and temperature on the expected strength (ISO 24033:2006, IDT)
SS-EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)
SS-ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength (ISO 24033:2009, IDT)

Spanish Association for Standardization (UNE)

UNE 53509:1995 RUBBER. TIMES, TEMPERATURES AND HUMIDITIES FOR CONDITIONING AND TESTING
AENOR UNE-EN ISO 2578:1999 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993)
UNE-EN ISO 2578:1999 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993)
UNE-EN 1252-1:1998 CRYOGENIC VESSELS. MATERIALS. PART 1: TOUGHNESS REQUIREMENTS FOR TEMPERATURE BELOW -80 ºC.
AENOR UNE 53511:2001 Elastomers. Determination of the remaining deformation due to compression at constant deformation at ambient, high or low temperatures.

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TR-585-2006 Time, Temperature and Humidity Stress of Final Board Finish Solderability

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 24033:2013 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
OS GSO ISO 3213:2015 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength
OS GSO ISO 12230:2015 Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength
OS GSO ISO 10146:2013 Cross linked polyethylene (PE-X) pipes - Effect of time and temperature on the expected strength

BE-NBN

NBN-EN 24672-1993 Rubber and plastics hoses. Sub-ambiant temperature flexibility tests (ISO 4672:1988)
NBN T 03-165-1980 Sodium chloride for industrial use - Détermination of the loss of mass at 110 °C

American National Standards Institute （ANSI)

ANSI/IEEE 738:2006 Standard for Calculating the Current-Temperature of Bare Overhead Conductors

PL-PKN

PN C04224-1993 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
PN BN 6091-10-1964 Mining explosive materials. Stability label stored at 75 degrees

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 3213:2016 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength

RO-ASRO

STAS 10551-1976 UNSATURATED POLYESTER RESINS Determination of the maximum temperature and the rate of increase of temperature during the setting at 80°C

Ente Nazionale Italiano di Unificazione

UNI ISO 471:1996 Rubber. Temperatures, humidities and times for conditioning and testing.
UNI EN ISO 2578:2000 Plastics - Determination of time- temperature limits after prolonged exposure to heat
UNI EN 14292:2005 Adhesives - Wood adhesives - Determination of static load resistance with increasing temperature

Lithuanian Standards Office

LST EN ISO 2578:2002 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)

South African Bureau of Standard

SANS 471:2003 Rubber - Temperatures, humidities and times for conditioning and testing

American Water Works Association (AWWA)

AWWA JAW31524 Journal AWWA — Carbon Regeneration: Dependence on Time and Temperature
AWWA WQTC64117 The Optimal Holding Time and Temperature for Legionella pneumophila Water Samples

Standards Norway

NS-EN ISO 2578:1998 Plastics — Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)

CL-INN

INDITECNOR 20-102 Petroleum products: liquefied gas. Temperature test at 95% boiling

American Petroleum Institute (API)

API 4063 VOL I-1969 TIME-TEMPERATURE HISTORIES OF SPECIFIED FUEL SYSTEMS VOLUME I

European Committee for Standardization (CEN)

EN 1252-1:1998/AC:1998 Cryogenic Vessels - Materials - Part 1: Toughness Requirements for Temperatures Below - 80 Degrees C Ratified European Text
EN 1252-1:1998 Cryogenic vessels Materials Part 1: Toughness requirements for temperatures below p80 °C (Incorporating corrigendum December 1998)

IN-BIS

IS 13867-1993 Rubber. Standard temperatures, humidities and times for the conditioning and time interval between vulcanization and tersting of test pieces

YU-JUS

JUS G.S2.640-1991 Plastics and abonite.Determination of temperature of deflection under load

Standard Association of Australia （SAA）

AS 1683.20:2001 Methods of test for rubber - Standard temperatures, humidities and times for conditioing and testing

IPC - Association Connecting Electronics Industries

IPC TR-585 CD-2006 Time@ Temperature and Humidity Stress of Final Board Finish Solderability

PT-IPQ

NP 1294-1976 condiment. Mustard particles. Measurement of weight loss at 103 degrees Celsius

Bureau of Indian Standards

IS 13360-6-22-2006 Plastics - Methods of Testing :part 6 Thermal Properties, Section 22 Determination of Time-temperature Limits After Prolonged Exposure to Hear

Magyar Szabványügyi Testület

MSZ KGST 893-1978 The definition of unsaturated polyester resin, the gel time of the resin is 298 degrees (25 ℃)