Coal work

Coal work, Total:88 items.

The international standard classification for "Coal work" includes: Equipment for processing of minerals , General purpose pallets , Mining equipment in general , Coals .

The Chinese standard classification for "Coal work" includes: Coal mine special equipment , Basic standard and general method , Crushing and grinding equipment , Mining machinery equipment in general .

Professional Standard - Coal

MT/T 824-1999 Coal Mine Working Surface for Machanical Exploiting Communication and Control Device
MT/T 553-1996 Floor Classification of Coal Mining Faces in Gently Inclined Coal Seams
MT 554-1996 Classification of Top Plate at Coal Face of Gently Inclined Coal Seam
MT/T 554-1996 Roof Classification of Coal Mining Face in Gently Inclined Coal Seam
MT/T 874-2000 Testing methods for floor compressibilities for coal mining face under conditions of gently inclined seam
MT/T 1094-2008 Coal using pressurized disk filter criteria
MT/T 397-1995 General technical conditions of coal mine simulation board
MT 397-1995 General Technical Specifications for Mimic Panel of Coal Mine
MT 553-1996 Classification of Bottom Plate at Coal Face of Gently Inclined Coal Seam

Group Standards of the People's Republic of China

T/GZSX 019-2017 Panzhou Coal Factory Fried Chicken
T/CCS 011-2023 Design requirements for intelligent connection of coal mining face
T/GRM 007-2020 Exploration standard of seismic trough wave in coal mining face
T/CAQI 100-2020 Regulations for supervision and inspection of commercial coal quality
T/GRM 085-2023 Technical specifications for water prevention and control in thick coal seam caving mining face
T/CCEAT 001-2021 Electrician(coal miner)operator--Training specification
T/CSEE 0315-2022 Design guidelines for noise control in coal-fired power plants
T/QGCML 1556-2023 Top coal caving process in fully mechanized caving working face
T/SDAS 849-2024 Technical specifications for the withdrawal of coal mine comprehensive mining working faces
T/QGCML 2503-2023 Coal bed methane condensate cylinder manufacturing process specifications

Professional Standard - Electricity

DL/T 1878-2018 Specification of inventory in stored coal yard for power plant

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34394-2017 Maximum working load for flat pallets

Professional Standard - Machinery

JB/T 6990-2010 MP Coal mill
JB/T 6990-2002 MP Coal mill

能源

NB/T 51035-2015 Channel wave seismic method in coal working face
NB/T 51030-2015 Construction and Acceptance Specifications of Grouting Engineering at Working Face in Coal Mine Shaft and Roadway

煤炭工业部

ZB 98001-1990 Coal mine machine mining face communication and control device

国家能源局

NB/T 10542-2021 Methods of seismic attention tomography for geologic anomaly in coalmine working faces
NB/T 51067-2017 Technical specifications of top-coal drawing in fully mechanized top coal caving face

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37771-2019 General matching guideline for fully-mechanized mining face

Professional Standard - Energy

NB/T 51018-2014 Throwing-type backfilling technology with solid materials in working face specifications
NB/T 11257-2023 Safety conditions assessment of water hazards prevention and control of mining and tunnelling working face in underground coal mine
NB/T 10885-2021 Cementing operation design and specification for coalbed methane well
NB/T 51003-2012 Design Specifications of Coal Face of Gas Comprehensive Treatment
NB/T 10965-2022 Technical specification for low-level drainage roadway in coal mining face

Shandong Provincial Standard of the People's Republic of China

DB37/T 106-1988 Basic requirements for working drawings of mechanical and electrical products in coal mines

Spanish Association for Standardization (UNE)

UNE 22400:1974 WORKING PLANES OF COAL MINES.

International Organization for Standardization (ISO)

ISO 19719:2010 Machine tools - Work holding chucks - Vocabulary
ISO 8611-3:2011 Pallets for materials handling - Flat pallets - Part 3: Maximum working loads
ISO/TS 8611-3:2005 Pallets for materials handling - Flat pallets - Part 3: Maximum working loads

German Institute for Standardization

DIN 23006-6:2005 Preparation of hard coal - Assessment of preparation equipment and processes - Part 6: Homogenizing
DIN EN ISO 8611-3:2012-10 Pallets for materials handling - Flat pallets - Part 3: Maximum working loads (ISO 8611-3:2011); German version EN ISO 8611-3:2012

British Standards Institution (BSI)

BS ISO 19719:2010 Machine tools - Work holding chucks - Vocabulary
Video "BSI - Working for quality"-1995 Video "BSI - Working for quality"
BS 1983-5:1989 Chucks for machine tools and portable power tools - Code of practice for the safe operation of workholding chucks used on lathes
BS ISO 8611-3:2011 Pallets for materials handling — Flat pallets Part 3 : Maximum working loads

GB-REG

REG 30 CFR PART 77-2010 MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES
REG 30 CFR PART 77-2011 MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES
REG 30 CFR PART 71-2010 MANDATORY HEALTH STANDARDS桽URFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES

CN-STDBOOK

图书 3-9511 Practical Handbook for Standardization of Modern Coal Chemical Industry

RU-GOST R

GOST ISO 8611-3-2014 Pallets for loads. Flat pallets. Part 3. Maximum working

PL-PKN

PN G04553-1992 Hard and brown coal. Determination of zinc, lead and manganese

Association Francaise de Normalisation

NF X35-121:1987 ERGONOMICS. WORK ON VISUAL DISPLAY UNIT AND KEYBOARD. FITTINGS OF THE WORK PREMISES AND THE WORKPLACE.
NF M82-245:1955 MINING EQUIPMENT. COMPRESSED AIR PIPES. FLANGES AND SEALS.
NF E62-117*NF ISO 19719:2010 Machine tools - Work holding chucks - Vocabulary.
NF H50-003-3*NF EN ISO 8611-3:2012 Pallets for materials handling - Flat pallets - Part 3 : maximum working loads

IT-UNI

UNI 6751-1970 Manually operated tools with internally threaded operating discs
UNI 7754-1977 Disc working wheel for centerless grinding

CZ-CSN

CSN 44 4204-1983 Coal power loaders. General work safety requirements
CSN 25 7071-1982 Pressure gauges ials and scales of operating pressure auges

Korean Agency for Technology and Standards (KATS)

KS A ISO 9962-3:2014 Manually operated draughting machines－Part 3：Dimensions of scale rule chuck plates
KS A ISO 9962-3:2002 Manually operated draughting machines-Part 3:Dimensions of scale rule chuck plates
KS T ISO 8611-3-2015(2020) Pallets for materials handling — Flat pallets — Part 3: Maximum working loads
KS T ISO 8611-3-2020 Pallets for materials handling — Flat pallets — Part 3: Maximum working loads

European Committee for Standardization (CEN)

EN 1870-6:2017 Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood
EN ISO 8611-3:2012 Pallets for materials handling - Flat pallets - Part 3: Maximum working loads

VN-TCVN

TCVN 5578-1991 Coal.Sampling industrial seams in situ

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD219-2010 Solid-State Drive (SSD) Endurance Workloads

American Society for Testing and Materials (ASTM)

ASTM F1347-91(2012) Standard Specification for Manually Operated Fueling Hose Reels
ASTM F1347-91(2006) Standard Specification for Manually Operated Fueling Hose Reels
ASTM F1347-91(2001) Standard Specification for Manually Operated Fueling Hose Reels
ASTM F1347-91(1996) Standard Specification for Manually Operated Fueling Hose Reels

Danish Standards Foundation

DS/EN ISO 8611-3:2013 Pallets for materials handling - Flat pallets - Part 3: Maximum working loads

GSO

OS GSO ISO 8611-3:2014 Pallets for materials handling -- Flat pallets -- Part 3: Maximum working loads
BH GSO ISO/TS 8611-3:2015 Pallets for materials handling - Flat pallets – Part 3 : Maximum working loads
OS GSO ISO/TS 8611-3:2007 Pallets for materials handling - Flat pallets – Part 3 : Maximum working loads

American National Standards Institute （ANSI)

DS/EN ISO 8611-3:2012 Pallets for materials handling - Flat pallets - Part 3: Maximum working loads
ANSI/ASTM F1347:1991 Specification for Manually Operated Fueling Hose Reels

SCC

NS-EN 1552:2003 Underground mining machines — Mobile extracting machines at the face — Safety requirements for shearer loaders and plough systems
DANSK DS/EN ISO 8611-3:2012 Pallets for materials handling - Flat pallets - Part 3: Maximum working loads
SPC GB/T 37768-2019 General matching specification for fully-mechanized mining face in medium-thickness coal seam (TEXT OF DOCUMENT IS IN CHINESE)
DANSK DS/EN 1552:2003 Underground mining machines – Mobile extracting machines at the face – Safety requirements for shearer loaders and plough systems

Standard Association of Australia （SAA）

AS 1418.17:1996(R2016) Cranes (including hoists and winches) - Design and construction of workboxes
AS 1418.17:1996 Cranes (including hoists and winches) - Design and construction of workboxes

United States Navy

NAVY MIL-S-85634 VALID NOTICE 1-1992 SEALER, HEAT, SEAM TAPE& PATCH, ANTI EXPOSURE COVERALL
NAVY MIL-S-85634-1984 SEALER, HEAT, SEAM TAPE& PATCH, ANTI EXPOSURE COVERALL

US-CFR-file

CFR 30-71.208-2014 Mineral Resources. Part71:Mandatory health standards—surface coal mines and surface work areas of underground coal mines. Section71.208:Bimonthly sampling; designated work positions.

Indonesia Standards

SNI 13-7082-2005 Codes of piling up of upper layer in coal mine workings
SNI 02-4505-1998 Working test methods for rotary disc type salt iodization machines

Others: Coal work,How the Coal Meter Works