solid internal force

solid internal force, Total:129 items.

The international standard classification for "solid internal force" includes: Education , Aerospace engines and propulsion systems .

The Chinese standard classification for "solid internal force" includes: Special instruments for teaching , Spacecraft power system .

Professional Standard - Education

JY 226-1987 Solid shrinkage demonstrator
JY/T 0226-2019 Demonstrator solid contractility

Professional Standard-Ships

CB 20140-2014 Specification of solid buoyancy materials

Group Standards of the People's Republic of China

T/CIC 048-2021 Solid recovered fuels for thermal power generation
T/ZZB 2439-2021 Syntactic buoyancy material for high hydrostatic pressures
T/CI 190-2023 Test procedures for stress wave propagation characteristics in rock bodies
T/CCPITCSC 107-2022 Requirements for occupational competence of internal management system auditor
T/CIITA 114-2021 PKS system—Technical requirements of UEFI firmware built in trusted boot
T/CSCCN 0001-2024 Evaluation index system of all media copyright content influence

Military Standard of the People's Republic of China-General Armament Department

GJB 715.27-1990 Fastener Test Method Stress Durability—Femalely Threaded Fasteners

未注明发布机构

DIN EN 16510-2-1 E:2013-01 Residential solid fuel burning appliances - Part 2-1: Roomheaters
DIN 66137-3 E:2017-01 Determination of solid state density - Part 3: Gas buoyancy method
DIN EN 16510-2-1 E:2021-04 Residential solid fuel burning appliances - Part 2-1: Roomheaters
DIN 50104:1947 Testing of hollow bodies by internal pressure; leak detection up to a certain pressure value; general specifications
ASME V&V 10-2019 Standard for Verification and Validation in Computational Solid Mechanics

Professional Standard - Aerospace

QJ 1392-1988 Internal-pressure test method for the chamber case of solid rocket motor
QJ 1392A-2005 Internal-pressure test method for the chamber case of solid rocket motor

BE-NBN

NBN M 02-010-1979 Determination of the gross calorific value of a solid fuel and cal-culation of its net calorific value
NBN 738-1970 The bottom of the cylindrical body that is not fixed by braces under the action of internal pressure
NBN 738 ADD 2-1984 The non-braced bottom of a cylindrical body under internal pressure
NBN 737-1970 Reinforcement of cylindrical body opening under internal pressure

HU-MSZT

MSZ 13822/15-1984 Pressure cooker stability calculation internal pressure bearing fixtures
MSZ 492-1962 Solid soft rubber discontinuous resistance
MSZ 4578-1959 Excavator internal cock. Safety three-wheel connector. Pressure 16
MSZ 4571-1959 Excavator internal cock. Internal pressure 10
MNOSZ 13132-1953 Internal pressure of folding box 6
MSZ KGST 2411-1980 Determination of electrical resistance of solid electrical insulating materials

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM1312-14-1997 Fastener Test Methods; Method 14 Stress Durability Internally Threaded Fasteners
AIA/NAS NASM24066/2-1999 Clip, Solid, Spring Tension

GOSTR

GOST R ISO 7206-13-2019 Implants for surgery. Partial and total hip joint endoprostheses. Part 13. Determination of resistance to torque of head fixation of stemmed femoral components

ESDU - Engineering Sciences Data Unit

A1-2009 FLUID MECHANICS@ INTERNAL FLOW SERIES:TITLES Issue 6
ESDU 04021-2010 Fluid Mechanics@ Internal Flow Series: Record of Documents
ESDU 04021-2009 Fluid Mechanics@ Internal Flow Series: Record of Documents

German Institute for Standardization

DIN 66137-3:2005 Determination of solid state density - Part 3: Gas buoyancy method
DIN EN ISO 4027 Berichtigung 1:2007 Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003, Corrigenda to DIN EN ISO 4027:2004-05
DIN 66137-3:2019-03 Determination of solid state density - Part 3: Gas buoyancy method
DIN 18897-1:2005-06 Fireplaces fired by solid fuel - Independent supply through the room air - Part 1: Roomheaters / Note: Applies in conjunction with DIN 18890 (1971-09), DIN 18891 (1984-08), DIN EN 13240 (2002-02), DIN EN 14785 (2004-05).
DIN 47637:1986 Separable accessories for power cable for bushing with inside cone; U<(Index)m>= 36 kV, inside cone and fastening for the separable connector
DIN EN 16510-2-1:2023-02 Residential solid fuel burning appliances - Part 2-1: Roomheaters; German version EN 16510-2-1:2022 / Note: DIN EN 13240 (2005-10) and DIN EN 13240 Berichtigung 1 (2008-06) remain valid alongside this standard until 2025-11-30.
DIN EN 16510-2-1:2023 Residential solid fuel burning appliances - Part 2-1: Roomheaters
DIN 18892:2000 Inserts for solid fuel to be built in Kacheloefen/Putzoefen
DIN EN ISO 10642:2020-02 Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019); German version EN ISO 10642:2019
DIN 50104:1983 Testing of hollow bodies by internal pressure; leak detection up to a certain pressure value; general specifications
DIN 33411-1:1982 Physical strenghts of man; concepts, interrelations, defining parameters
DIN EN 2434-003:2010-12 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 003: Flexible and high fluid resistance for interior; German and English version EN 2434-003:2010
DIN EN ISO 7380-1:2023-04 Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws (ISO 7380-1:2022); German version EN ISO 7380-1:2023

AT-ON

ONORM M 7520-1977 Room-heating appliances for solid fuels
ONORM M 7521-1976 Room-heating capacity of stoves for solid and liquid fuels
OENORM EN 16510-2-1-2021 Residential solid fuel burning appliances - Part 2-1: Roomheaters
ONORM M 7308-1992 Fiat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pressure - Design and calculation
ONORM ISO 4406:1991 Hydraulic fluid power — Fluids — Method for coding level of contamination by solidparticles

Danish Standards Foundation

DS 887-1:1990 Solid fuel stove for room heating. Part 1: Requirements
DS 887-2:1990 Solid fuel stove for room heating. Test methods. Part 2
DS/EN 2434-003:2010 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 003: Flexible and high fluid resistance for interior

VDI - Verein Deutscher Ingenieure

VDI 3625-1994 Hydraulischer Feststofftransport - Nomenklatur

RO-ASRO

STAS 6281-1969 Solid fuel. Glue force measurement
STAS SR ISO 1167:1993 Plastics pipes for the transport of fluids. Determination of the resistence to internai pressure
STAS 8592-1970 SOLID FULES Determination of the moisture holding capacity
STAS 12440/3-1986 Hydraulic fluid power MOUNTING SURFACES FOR NORMA t. SHUTT-OKF PRESSURE VALVES WITH INNER CONTROL Dimensions

IN-BIS

IS 6512-1984 Design criteria for solid gravity dams

National Aeronautics and Space Administration (NASA)

NASA-CR-540-1966 Buckling of cylindrical shell end closures by internal pressure

Association Francaise de Normalisation

NF EN ISO 14581:2023 Fasteners - Countersunk head screw (common head) with six internal lobes with reduced load capacity
CWA 16799:2014 Validation of computational solid mechanics models
NF EN ISO 10642:2019 Fasteners - Reduced load capacity hexagon socket countersunk head screws

SCC

DIN 66137-3:2019 Determination of solid state density - Part 3: Gas buoyancy method
AWWA DSS92028 100% Solids Polyurethanes, The Next Generation of Water Tank Lining
AENOR UNE 10043:1953 FIXED ADVANCE MAGNETIC FLYWHEEL, STATOR WITH INTERIOR CENTERING. QUALITY STANDARD
SN-CWA 16799:2014 Validation of computational solid mechanics models
DANSK DS/CWA 16799:2014 Validation of computational solid mechanics models
BS 3378:1972 Specification for room heaters burning solid fuel
DIN 66137-3 E:2017 Draft Document - Determination of solid state density - Part 3: Gas buoyancy method
DANSK DS/ISO 10642:2019 Fasteners – Hexagon socket countersunk head screws with reduced loadability
ASME V&V 10-2019 Standard for Verification and Validation in Computational Solid Mechanics
ASME V&V 10-2006(R2016) Guide for Verification and Validation in Computational Solid Mechanics
DANSK DS/ISO 4406:2021 Hydraulic fluid power – Fluids – Method for coding the level of contamination by solid particles
AS CA27:1959 Code of recommended practice for internal plastering on solid backgrounds
NS-EN 2434-003:2010 Aerospace series — Paints and varnishes — Two component cold curing polyurethane finish — Part 003: Flexible and high fluid resistance for interior
DANSK DS/EN 2434-003:2010 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 003: Flexible and high fluid resistance for interior
DANSK DS/EN 16510-2-6:2023 Residential solid fuel burning appliances – Part 2-6: Mechanically by wood pellets fed roomheaters, inset appliances and cookers
DANSK DS/ISO 7380-1:2023 Fasteners – Button head screws with reduced loadability – Part 1: Hexagon socket button head screws

SAE - SAE International

SAE J1235-1978 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve@ Recommended Practice
SAE J1235-2015 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve

Society of Automotive Engineers (SAE)

SAE J1235-2023 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve
SAE J1235-1986 Measuring and Reporting the Internal Leakage of a Hydraulic fluid power Valve
SAE AS3217C-2020 RING, RETAINING-SPIRAL, INTERNAL LIGHT DUTY, CRES
SAE AS3217B-2019 RING, RETAINING-SPIRAL, INTERNAL LIGHT DUTY, CRES

KR-KS

KS P ISO TS 13498-2019 Dentistry — Torsion test of implant body/connecting part joints of endosseous dental implant systems
KS B ISO 10642-2023 Fasteners — Hexagon socket countersunk head screws with reduced loadability

Korean Agency for Technology and Standards (KATS)

KS P ISO TS 13498:2019 Dentistry — Torsion test of implant body/connecting part joints of endosseous dental implant systems
KS M ISO 4406_2001:2007 Hydraulic fluid power－fluids－Method for coding the level of contamination by solid particles
KS B ISO 4406-2023 Hydraulic fluid power－Fluids－Method for coding the level of contamination by solid particles
KS M ISO 4406_2001-2007 Hydraulic fluid power－fluids－Method for coding the level of contamination by solid particles

AIA/NAS - Aerospace Industries Association of America Inc.

NASM1312-14-1997 Fastener Test Methods; Method 14 Stress Durability Internally Threaded Fasteners

ES-AENOR

UNE 21-302 Pt.212-1992 Electrotechnical Vocabulary. Insulating solids, liquids and gases

CZ-CSN

CSN 64 0122-1953 Testing the pressure of solid non-metallic materials
CSN 38 6443 Z2-1996 Pressure regulator for gas input pressure up to 0,3 MPa
CSN 01 1303-1976 Quantities and units of fluid mechanics and thermomechanios
CSN 69 0010 Doplnek.4-1975 Stationary pressure vessels. Technieal ules. Strength calculatk n of prossure essel parts of austenitic wteels

British Standards Institution (BSI)

BS CWA 16799:2014 Validation of computational solid mechanics models
BS 3378:1986 Specification for roomheaters burning solid mineral fuels
BS EN 16510-2-1:2022 Residential solid fuel burning appliances. Roomheaters
BS EN ISO 10642:2019 Fasteners. Hexagon socket countersunk head screws with reduced loadability

U.S. Military Regulations and Norms

ARMY MIL-F-26862 B-1970 FIBERBOARD, SOLID, NON-CORROSIVE FUNGI-RESISTANT FOR INTERIOR BLOCKING APPLICATIONS
ARMY MIL-F-26862 B (2)-1989 FIBERBOARD, SOLID, NON-CORROSIVE FUNGI-RESISTANT FOR INTERIOR BLOCKING APPLICATIONS
ARMY MIL-F-26862 B REINST NOTICE 3-1974 FIBERBOARD, SOLID, NON-CORROSIVE FUNGI-RESISTANT FOR INTERIOR BLOCKING APPLICATIONS
ARMY MIL-PRF-44494 A VALID NOTICE 1-2011 Heated, Space - Radiant, Non-Powered, Liquid& Solid Fuel

CEN - European Committee for Standardization

PREN 16510-2-1-2013 Residential solid fuel burning appliances - Part 2-1: Roomheaters

European Committee for Standardization (CEN)

EN 16510-2-1:2022 Residential solid fuel burning appliances - Part 2-1: Roomheaters
prEN 16510-2-1-2021 Residential solid fuel burning appliances - Part 2-1: Roomheaters
EN 464:1994 Protective clothing for use against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (internal pressure test)

ES-UNE

UNE-EN 16510-2-1:2023 Residential solid fuel burning appliances - Part 2-1: Roomheaters
UNE-EN ISO 10642:2020 Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019)
UNE-EN 2434-003:2010 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 003: Flexible and high fluid resistance for interior (Endorsed by AENOR in December of 2010.)

Aerospace Industries Association

AIA NASM1312-14-1997 Fastener Test Methods; Method 14 Stress Durability Internally Threaded Fasteners 53GP

RU-GOST R

GOST R EN ISO 13982-2-2009 Occupational safety standards system. Protective clothing for use against solid particulates. Part 2. Test method of determination of inward leakage of aerosols of fine particles into suits
GOST R 53212-2008 Sonfectionery. Methods for determination of dry fat-free solids of milk content in chocolate products with milk

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 2434-03-1996 Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Part 3: Flexible and High Fluid Resistance for Interior
PREN 2434-03-2001 Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Part 03: Flexible and High Fluid Resistance for Interior (Edition P 1)

SE-SIS

SIS SMS 1086-1947 Faucet, fixed handle, internal and external thread, pressure rating 8
SIS SMS-1015-1937 Internal tubular connections for gas delivery. Maximum working pressure IIa-9kg/cm2
SIS SS-ISO 1167:1982 Plastics pipes for the transport of fluids - Determination of the resistance to internal pressure
SIS 71 10 34-1961 Internal pressnre test im uluss containers

Lithuanian Standards Office

LST EN 2434-003-2011 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 003: Flexible and high fluid resistance for interior

Standard Association of Australia （SAA）

IEC Report IEC Report - Magnetically induced currents in the human body

GSO

GSO ISO 4406:2023 Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles

American Society of Mechanical Engineers (ASME)

ASME V V 10-2006 Guide for Verification and Validation in Computational Solid Mechanics

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 2434-2003 Aerospace Series Paints and Varnishes Two Component Cold Curing Polyurethane Finish Part 03: Flexible and High Fluid Resistance for Interior (Edition P 1)

European Association of Aerospace Industries

AECMA PREN 3030-1992 Aerospace Series Test Method for Dry Film Lubricants Solids Content Edition 1

VE-FONDONORMA

COVENIN 969-1976 Test methods for steel pipes in the Venezuelan ferrous material standards (internal hydrostatic pressure method)

Others: Solid internal moisture detection,solid internal force,solid internal elements