liquid packing

liquid packing, Total:110 items.

The international standard classification for "liquid packing" includes: Essential oils , Equipment for the chemical industry , Valves , Pesticides and other agrochemicals .

The Chinese standard classification for "liquid packing" includes: Fragrances and flavors , Chemical machinery and equipment parts , Valve , Pesticide .

Taiwan Provincial Standard of the People's Republic of China

CNS 11482-1986 Method of Test for pH of Paper Filler and Pigment Slurries

Jilin Provincial Standard of the People's Republic of China

DB22/T 1697-2012 Determination of Nifurene Hydrazone in Feeds by Liquid Chromatography-Mass Spectrometry/Mass Spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11539-2008 Fragrance/Flavor substances - Analysis by gas chromatography on packed columns - General method

Professional Standard - Chemical Industry

HG/T 4590-2014 Test method for surface wettability of tower packing
HG/T 21559.1-2013 Engineering Technical Specification for Stainless Steel Punched-mesh Corrugated-sheet Structured Packings
HG/T 21537-1992 Stuffing Box

Professional Standard - Machinery

JB/T 1712-2008 Components of valves-Packing and gaskets
JB/T 1708-2010 Components of valves-Gland pressure sleeves and plates
JB/T 5209-1991 plastic filler

未注明发布机构

SAE AMS 4764H-2024 Copper Alloy, Brazing Filler Metal, 52.5Cu - 38Mn - 9.5Ni, 1615 to 1700 ¡ãF (879 to 927 ¡ãC) Solidus-Liquidus Range

Group Standards of the People's Republic of China

T/WZBF 018-2022 Components of valves—Gland,pressure sleeves and plates

机械电子工业部

JB 5209-1991 plastic filler

工业和信息化部

HG/T 5825-2021 Test method for determining distributing performance of liquid distribution device in packed tower

Professional Standard - Commodity Inspection

SN/T 1407-2004 Determination of active content of 2.5% brodifacoum mother solution for import and export - HPLC

Defense Logistics Agency

DLA AN6225 REV 8-2008 PACKING ?揤?RING HYDRAULIC
DLA MIL-DTL-5521 C VALID NOTICE 1-2013 Washer, Aircraft Hydraulic Packing Back-Up
DLA MIL-DTL-16685 E-2009 PACKING, MATERIAL AND PACKING PREFORMED (STUFFING TUBE FOR ELECTRIC CABLES)
DLA MIL-P-16685 D (2)-1995 PACKING, MATERIAL AND PACKING PREFORMED (STUFFING TUBE FOR ELECTRIC CABLE)
DLA MIL-P-16685 D-1970 PACKING, MATERIAL AND PACKING PREFORMED (STUFFING TUBE FOR ELECTRIC CABLE)
DLA MIL-DTL-5516 D-2008 Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160癋 (71癈)

SCC

CAN/CGSB-1.188-2004 Emulsion Filler for Masonry Block
MIL MIL-PRF-32287A-2011 Packing, Preformed, Petroleum Hydraulic Fluid Resistant
MIL MIL-PRF-32287-2009 Packing, Preformed, Petroleum Hydraulic Fluid Resistant
CAN/CSA-W48-2001(C2006) Filler metals and associated materials for arc welding
MIL MIL-DTL-16685E-2009 Packing, Material and Packing Preformed (Stuffing Tube for Electric Cables)
SAE AMSP5516A-2010 Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160°F
DANSK DS/ISO 20427:2024 Pigments and extenders – Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods
CSA W48-2023 Filler metals and allied materials for metal arc welding
MIL MIL-P-87175-1982 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLUOROELASTOMER (NO S/S DOCUMENT)
MIL MIL-P-18493-1955 PACKING, PREFORMED, CARBON; AND, CARBON STOCK, PACKING
MIL MIL-W-5521B-1968 WASHER, AIRCRAFT HYDRAULIC PACKING BACK-UP (SUPERSEDING MIL-W-5521A)
MIL MIL-DTL-5521C-2007 WASHER, AIRCRAFT HYDRAULIC PACKING BACK-UP(SUPERSEDING MIL-W-5521B)
MIL MIL-P-2911A-1957 PACKING ASSEBLY, HYDRAULIC CONICAL AND V TYPES (NO S/S DOCUMENT)
HOLDEN HN 1513-2001 Wadding
MIL MIL-P-21099-1957 PACKING ASSEMBLY, HYDRAULIC CONICAL AND V TYPES, FIRE RESISTANT TYPE HYDRAULIC FLUIDS (NO S/S DOCUMENT)
CSA W48-2014 Filler metals and allied materials for metal arc welding
CAN/CSA-W48-2001(R2006) Filler Metals and Allied Materials for Metal Arc Welding
CSA W48-2006(R2011) Filler Metals and Allied Materials for Metal Arc Welding
MIL MIL-P-82745-1985 PACKING, PREFORMED, HYDRAULIC OIL COMPATIBLE (CODE IDENT 53711)
CAN/CGSB-1.188-M90-1990 Emulsion Type Filler Masonry Block
MIL MIL-P-25732D-2021 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, LIMITED SERVICE AT 275 DEG. F (135 DEG. C)
ADS AS4817-4820 Cap for Packing Piece

German Institute for Standardization

DIN 3780:1954-09 Seals and Packings; Stuffing Box Diameters and Related Packing Widths, Design Sheet
DIN 3780:1954 Seals and Packings; Stuffing Box Diameters and Related Packing Widths, Design Sheet
DIN 3780:1994 Seals and Packings; Stuffing Box Diameters and Related Packing Widths, Design Sheet
DIN EN 15781:2009 Animal feeding stuffs - Determination of maduramicin-ammonium by reversed-phase HPLC using post-column derivatisation; German version EN 15781:2009

Korean Agency for Technology and Standards (KATS)

KS W 1615-2016 Aerospace－Hydraulic packing back－up washer
KS W ISO 1465:2009 Aircraft-Liquid oxygen replenishment couplings-Mating dimensions
KS W 2016-1982 Gland design；packings, hydraulic, general requirements for
KS W 2016-2002(2012) Gland design；packings, hydraulic, general requirements for
KS W 1549-1978(2011) Packing, preformed, petroleum hydraulic fluid resistant, 275℉
KS W 2016-2013 Gland design；packings, hydraulic, general requirements for
KS W 1615-2004(2014) Aerospace－Hydraulic packing back－up washer
KS I ISO 2943:2005 Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids

U.S. Air Force

AIR FORCE MIL-V-25469 H VALID NOTICE 2-2008 Valves, Filler, Liquid Oxygen, Aircraft Type
AIR FORCE MIL-V-25469 H NOTICE 1-1996 VALVES, FILLER, LIQUID OXYGEN, AIRCRAFT TYPE
AIR FORCE MIL-V-25469 H-1990 VALVES, FILLER, LIQUID OXYGEN, AIRCRAFT TYPE
AIR FORCE MIL-PRF-83766 B-1997 FILLER AND PRESSURIZATION UNIT, HYDRAULIC SYSTEM
AIR FORCE QPL-25469-11-2003 VALVES, FILLER, LIQUID OXYGEN, AIRCRAFT TYPE
AIR FORCE MIL-PRF-38201 D-1998 VALVE, FILLER, LIQUID OXYGEN, FEMALE, CRU-59/E [Use In Lieu Of: AIR FORCE MIL-V-0038201 B]

International Organization for Standardization (ISO)

ISO 1465:1989 Aircraft; liquid oxygen replenishment couplings; mating dimensions
ISO 2943:1998 Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids

IN-BIS

IS 345-1952 Specification for wood fillers clear liquid

United States Navy

NAVY MIL-P-19152 A NOTICE 2-1998 PACKINGS, HYDRAULIC, HIGH PRESSURE (FOR HYDROPNEUMATIC SYSTEMS)
NAVY MIL-PRF-0032287-2009 PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT
NAVY MIL-P-19152 A-1974 PACKINGS, HYDRAULIC, HIGH PRESSURE (FOR HYDROPNEUMATIC SYSTEMS)

GM North America

GM 9981115-2000 Lubricant - Liquid - Glass Channel Filler

Society of Automotive Engineers (SAE)

SAE MAM4778-1989 BRAZING FILLER METAL, NICKEL ALLOY 92Ni - 4.5Si - 3.1B 980° - 1040°C Solidus-Liquidus Range
SAE AMS-P-5516-1998 Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160°F
SAE AMS4787H-2022 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature
SAE AMS4787F-2008 Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature
SAE AS3031-1-1947 AS3031-3036 Packing Washer (Flush Filler Cap)
SAE AS8791/1A-1998 Reretainer, Packing, Hydraulic and Pneumatic, Polytetrafluoroethylene, Single Turn
SAE AMS4788A-2009 Silver Alloy Brazing Filler Metal 50Ag - 28Zn - 20Cu - 2.0Ni 1220 to 1305 °F (660 to 707 °C) Solidus-Liquidus Range
SAE AMS4770L-2015 Silver Alloy Brazing Filler Metal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 °F (627 to 635 °C) Solidus-Liquidus Range
SAE AMS4770K-2009 Silver Alloy Brazing Filler Metal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 °F (627 to 635 °C) Solidus-Liquidus Range

RU-GOST R

GOST ISO 7359-2016 Essential Oils. Gas chromatography on packed columns. General requirements

SAE - SAE International

SAE AMS4787A-1978 BRAZING FILLER METAL@ HIGH TEMPERATURE 82Au - 18Ni 1740°F (950°C) Solidus-Liquidus Temperature (UNS P00820)
SAE AMS4782A-1978 Brazing Filler Metal@ Nickel 71Ni - 10Si - 19Cr 1975° - 2075°F (1080° - 1135°C) Solidus-Liquidus Range
SAE AMS4787B-1984 BRAZING FILLER METAL@ HIGH TEMPERATURE 82Au - 18Ni@ 1740°F (950°C) Solidus-Liquidus Temperature (UNS P00820)
SAE AMS4778L-2019 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range (UNS N99630)
SAE MAM4778D-2003 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 980 to 1040 °C Solidus-Liquidus Range (UNS N99630)
SAE AMS4778E-1992 Nickel Alloy Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 °F Solidus-Liquidus Range (UNS N99630)
SAE AS8791-1997 Retainer@ Packing@ Hydraulic and Pneumatic@ Tetrafluoroethylene Resin
SAE AMS4784C-1990 BRAZING FILLER METAL@ HIGH TEMPERATURE 50Au - 25Pd - 25Ni@ 2015° - 2050°F (1102° - 1121°C) Solidus-Liquidus Range (UNS P00500)
SAE AMS4765C-1991 Filler Metal@ Silver@ Brazing 56Ag - 42Cu - 2.0Ni 1420° to 1640° F (771° to 893°C) Solidus-Liquidus Range (UNS P07560)
SAE AS8791/1-1997 Retainer@ Packing@ Hydraulic and Pneumatic@ Polytetrafluoroethylene@ Single Turn
SAE MAM4778C-1995 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 980 to 1040 Degrees C Solidus- Liquidus Range (UNS N99630)
SAE AMS4778G-1995 Nickel Alloy@ Brazing Filler Metal 92Ni - 4.5Si - 3.1B 1800 to 1900 Degrees F Solidus-Liquidus Range (UNS N99630)
SAE AS8791/1B-2007 Retainer@ Packing@ Hydraulic and Pneumatic@ Polytetrafluoroethylene@ Single Turn
SAE AMS4778B-1978 Brazing Filler Metal@ Nickel 92Ni - 4.5Si - 3.1B 1800° - 1900°F (980° - 1040°C) Solidus-Liquidus Range
SAE AMS4778C-1981 Brazing Filler Metal@ Nickel 92Ni - 4.5Si - 3.1B 1800° - 1900°F (980° - 1040°C) Solidus-Liquidus Range

Spanish Association for Standardization (UNE)

UNE 84226:1992 ESSENTIAL OILS. ANALYSIS BY GAS CHROMATOGRAPHY ON PACKED COLUMNS. GENERAL METHOD.
UNE 104205:1985 FILLERS

American Society for Testing and Materials (ASTM)

ASTM E260-96(2006) Standard Practice for Packed Column Gas Chromatography
ASTM E260-96(2011) Standard Practice for Packed Column Gas Chromatography
ASTM C937-16 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete

PL-PKN

PN P04779 ArkusZ03-1975 Asbestos plaited packings Determination of change of mass in liqids

British Standards Institution (BSI)

BS EN ISO 20427:2024 Pigments and extenders. Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods

Indonesia Standards

SNI 7475-2008 Liquid fuel filters for fillpot

PT-IPQ

NP 1778-1984 cork. Filling material for expansion joints. Related features
NP 1777-1984 cork. Stone, cork, expansion joint filling material. Related tests

Canadian Standards Association (CSA)

CSA C2.1-06 UPD 1-2007 Single-phase and three-phase liquid-filled distribution transformers

CZ-CSN

CSN ON 72 2392-1963 filler*)
CSN 37 0195-1961 Stuffing box

The American Road & Transportation Builders Association

AASHTO M 146-1991(R2021) Standard Specification for Terms Relating to Subgrade, Soil–Aggregate, and Fill Materials

YU-JUS

JUS B.B8.101-1982 Testing of mineral filler. The determination ofdensity of filler.

DIN-adopted European-adopted ISO Standard

DIN EN ISO 20427:2024 Pigments and extenders – Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods (ISO 20427:2023); German version EN ISO 20427:2024

US-GSA

GSA A-A-272 B-2005 CAULKING COMPOUNDS

AASHTO - American Association of State Highway and Transportation Officials

M 146-1991 Standard Specification for Terms Relating to Subgrade@ Soil-Aggregate@ and Fill Materials