secretory capacity or capacity

secretory capacity or capacity, Total:244 items.

The international standard classification for "secretory capacity or capacity" includes: Pressure vessels, gas cylinders , Power capacitors , Jewellery , Vacuum technology , Rubber , Earthworks. Excavations. Foundation construction. Underground works .

The Chinese standard classification for "secretory capacity or capacity" includes: Pressure vessel , Electric energy measurement and load control system , Artistic handicrafts , Vacuum technique and equipment , Rubber products in general , Petrochemical and chemical industry engineering .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 20663-2017 Accumulators

Group Standards of the People's Republic of China

T/CASME 558-2023 Relay for intelligent power capacitors
T/CEEIA 678-2023 Technical specification of series formation and grading manufacturing equipment for EV and ESS cells
T/ZHAS 19-2023 Large capacity pressure cooker
T/CAICI 75-2023 4G/5G Capacity Intelligent Loadbalance Method for Recognizing, Locating and Optimizating
T/JSEPA 010-2023 Technical specification for intelligent functional requirements of large capacity offshore wind turbines
T/ZHAS 19-2024 Large capacity pressure cooker
T/JSEPA 022-2024 Guidelines for Optimal Management of Capacity and Demand of Two-part Electricity Users
T/GDC 158-2022 Evaluation of frost capacity of refrigerating appliance
T/BFIA 008-2021 Quantitative evaluation specification of data capability for financial industry
T/CAS 796-2023 Site selection and capacity allocation process and method of electrochemical energy storage station
T/JSEPA 009-2023 Evaluation Method for Localization Rate of Large Capacity Wind Turbine

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 18443.1-2001 Testing method of cryo-insulation pressure vessels-Volume measurement
GB/T 7757-1993 Rubber,vulcanized or thermoplastic-Determination of compression stress-strain properties
GB/T 18996-2003 Determination of silver in silver jewellery alloys--Volumertic (potentiometric) method using sodium chloride or potassium chloride
GB/T 528-1998 Rubber,vulcamized or thermoplastic--Determination of tensile stress-strain properties
GB/T 7757-2009 Rubber，vulcanized or thermoplastic - Determination of compression stress-strain properties
GB/T 7757-2009 Rubber，vulcanized or thermoplastic - Determination of compression stress-strain properties
GB/T 19956.2-2005 Positive-displacement vacuum pumps - Measurement of performance characteristics - Part 2: Measurement of ultimate pressure
GB/T 13865-1992 Instrument for electric load control
GB/T 9871-2008 Rubber，vulcanized or thermoplastic-Determination of aging characteristics by measurement of stress relaxation
GB/T 7757-2009 Rubber，vulcanized or thermoplastic - Determination of compression stress-strain properties
GB/T 7757-2009 Rubber，vulcanized or thermoplastic - Determination of compression stress-strain properties
GB/T 528-2009 Rubber，vulcanized or thermoplastic - Determination of tensile stress-strain properties
GB/T 20663-2006 Bladder type accumulators
GB/T 223.74-1991 Methods for chemical analysis of iron,steel and alloy--The combustion gravimetric/gasometric method for the determination of non-combined carbon content

Professional Standard - Aviation

HB 5220.48-1995 Superalloy Chemical Analysis Method Water Steam Distillation - Volumetric Method (or Absorptiometry) Determination of Nitrogen Content
HB/Z 5090.1-2001 Analysis method for electroless nickel plating solution Determination of nickel sulfate (or nickel chloride) content through EDTA volume method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 18996-2003(XG1-2003) Silver jewellery alloys—Determination of silver—Volumetric(potentiometric) method using sodium chloride or potassium chloride
GB/T 18996-2021 Silver jewellery alloys—Determination of silver—Volumetric (potentiometric) method using sodium chloride or potassium chloride

Professional Standard - Electricity

DL/T 2080-2020 Super capacitor for electrical energy storage
DL/T 1774-2017 Guidelines for power capacitor enclosures to withstand blast energy tests

未注明发布机构

CAN/CSA-C360-2013(R2018) Energy performance, water consumption and capacity of household clothes washers
DIN EN ISO 17556:2005-03 Plastics - Determination of the ultimate aerobic biodegradability of plastics materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
JIS K 6251:2023 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
DIN EN ISO 4938 E:2014-02 Determination of steel and iron-nickel content by gravimetric or volumetric method (draft)

Hunan Provincial Standard of the People's Republic of China

DB43/T 2551-2023 Technical specification for polarized capacitance detection of lithium-ion battery boxes for power energy storage

Professional Standard - Petrochemical Industry

SH/T 3074-2007 Steel pressure vessels of petrochemical
SH/T 3074-2018 Steel pressure vessels in petrochemical industry
SH 3074-1995 Steel pressure vessels of petrochemical

Taiwan Provincial Standard of the People's Republic of China

CNS 10606-1983 Welding Energy of Condenser Type Spot Welding Machines

未注明发布机构

DIN EN ISO 17556:2005-03 Plastics - Determination of the ultimate aerobic biodegradability of plastics materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
CAN/CSA-C360-2013(R2018) Energy performance, water consumption and capacity of household clothes washers
DIN EN ISO 4938 E:2014-02 Determination of steel and iron-nickel content by gravimetric or volumetric method (draft)
JIS K 6251:2023 Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties

工业和信息化部

YS/T 1065.5-2019 Test method for zeolite - Part 5: Determination of AI3+ EDTA volumetric method

International Organization for Standardization (ISO)

ISO 4665:2006 Rubber, vulcanized or thermoplastic - Resistance to weathering
ISO 4665:2016 Rubber, vulcanized or thermoplastic - Resistance to weathering
ISO 13756:1997 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride
ISO 13756:2015 Jewellery - Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride
ISO 7743:1989 Rubber, vulcanized or thermoplastic; determination of compression stress-strain properties
ISO 7743:2004 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
ISO 1607-2:1989 Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure
ISO 6914:2004 Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation
ISO 6914:2021 Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation in tension
ISO 6914:2013 Rubber, vulcanized or thermoplastic.Determination of ageing characteristics by measurement of stress relaxation in tension
ISO 4938:1988 Steel and iron; determination of nickel content; gravimetric or titrimetric method
ISO 4938:2016 Steel and iron - Determination of nickel content - Gravimetric or titrimetric method
ISO 7743:2008 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties
ISO/DIS 37:2023 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 1607-2:1978 Positive displacement vacuum pumps — Measurement of performance characteristics — Part 2: Measurement of ultimate pressure
ISO 6914:2008 Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation in tension
ISO 7743:1989/Cor 1:1990 Rubber, vulcanized or thermoplastic; determination of compression stress-strain properties; technical corrigendum 1
ISO 5596:1999 Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities

British Standards Institution (BSI)

BS ISO/TR 14179-2:2001 Gears - Thermal capacity - Thermal load carrying capacity
BS EN 13799:2012 LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS ISO 37:2011 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
BS ISO 7743:2011 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
BS EN 286-1:1998+A2:2005 Simple unfired pressure vessels designed to contain air or nitrogen - Pressure vessels for general purposes
BS ISO 15970:2008 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor
20/30409110 DC BS EN 13799. LPG equipment and accessories. Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 286-1:1998 Simple unfired pressure vessels designed to contain air or nitrogen — Part 1: Pressure vessels for general purposes
BS ISO 37:2024 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
BS EN ISO 4938:2016 Steel and iron. Determination of nickel content. Gravimetric or titrimetric method
BS EN ISO 28706-3:2018 Vitreous and porcelain enamels. Determination of resistance to chemical corrosion. Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle
BS ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
BS EN 13799:2022 LPG equipment and accessories — Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
BS EN 286-1:1998+A2:2005(2007) Simple unfired pressure vessels designed to contain air or nitrogen — Part 1 : Pressure vessels for general purposes
BS 5276-4:1977 Pressure vessel details (dimensions) - Standardized pressure vessels
BS 5276-4:1977(2000) Specification for Pressure vessel details (dimensions) — Part 4 : Standardized pressure vessels
BS ISO 16528-1:2008 Boilers and pressure vessels. Performance requirements
BS ISO 16528-1:2007 Boilers and pressure vessels - Performance requirements
BS ISO 6914:2009 Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension
BS ISO 6914:2013 Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension
BS EN 13311-3:2001 Biotechnology - Performance criteria for vessels - Glass pressure vessels
BS EN 15776:2022 Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%
BS ISO 5596:2000 Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities
BS ISO 13756:1997 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride
BS ISO 13756:1998 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride
19/30398333 DC BS EN 286-1. Simple unfired pressure vessels designed to contain air or nitrogen. Part 1. Pressure vessels for general purposes

Association Francaise de Normalisation

NF T46-040:2006 Rubber, vulcanized or thermoplastic - Resistance to weathering.
NF T46-040*NF ISO 4665:2016 Rubber, vulcanized or thermoplastic - Resistance to weathering
NF T46-004:1985 Vulcanized or thermoplastic rubber. Accelerated ageing or heat resistance determination forced air oven test.
NF T46-005:1985 Vulcanized or thermoplastic rubber. Accelerated ageing resistance determination. Oxygen pressure test.
NF E86-021:1989 Pressurized or not pressurized tanks, horizontal or vertical. External dimensions and capacities.
NF X20-517*NF EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties : density, pressure, temperature and compression factor
NF EN ISO 23088:2020 Bouteilles à gaz - Contrôles et essais périodiques des fûts à pression soudés en acier - Capacité inférieure ou égale à 1 000 l
NF E86-022:1989 Not pressurized vertical tanks. Capacity up to 70 cubic meters.
NF T20-522:1973 Sodium and potassium silicates for industrial use. Determination of total alkalinity, expressed in NA2O or in K2O. Volumetric meth od.
NF M88-734*NF EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
XP P84-708:2002 Bentonite geosynthetics - Quantification of self-healing capacity
NF Z85-374-1*NF ETS 300374-1:1999 Intelligent Network (IN). Intelligent Network Capability Set 1 (CS1). Core Intelligent Network Application Protocol (INAP). Part 1 : protocol specification.

PT-IPQ

NP ISO 37:2001 Rubber,vulcanized or thermoplastic Determination of tensile stress-strain properties
NP 2908-1987 Anodized aluminum. Inspection of coating. Measurement of electrical impedance or transmittance
NP EN 286-1-2000 Simple unfired pressure vessels designed to contain air or nitrogen Part 1:Pressure vessels for general purposed

YU-JUS

JUS N.C6.008-1981 Radio irequency cables. Maasuring of capacitance and capacitance unbalance
JUS M.C5.360-1987 Pressure regulators for liquefied gases, propan-butane capacity to 2 kg/h
JUS M.Z2.600-1991 Steel tanks for liquefied gases. VVelded tanks for capacities 7?; 10; 20; 30; 60; 100; 150; 200; 250 m*

SCC

CSA C359-M1979-1979 Energy Consumption, Freezing Capability and Capacity Measurement Test Methods for Household Freezers
NS-EN 13799:2022 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
IEC 60070A:1968 Power capacitors - Self-healing metallized power capacitors
AWWA ACE61873 Well Acidization for Increased Specific Capacity and Energy Cost Savings
AENOR UNE-EN 286-1:1999 SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN. PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES.
BS ISO 7743:2004 Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
NS-EN 286-1:1998 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
DANSK DS/EN 286-1:1998 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
AENOR UNE-EN 286-1/A1:2003 Simple unfired pressure vessels designed to contain air or nitrogen. Part 1: Pressure vessels for general purposes.
AWWA JAW59702 Journal AWWA — Modeling for Hydraulic Capacity
NS-EN 13799:2012 LPG equipment and accessories — Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
AS 2971:1987 Serially produced pressure vessels
BS 9064:1983 Sectional specification for circulators or isolators of assessed quality for capability approval
DANSK DS/EN 13799:2012 LPG equipment and accessories – Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
NS-EN 15776:2022 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 %
CAN/CSA C388-2015(R2020) Energy performance and capacity measurement of household microwave ovens
AWWA JAW55247 Journal AWWA — Forces to Reckon With
CAN/CSA-C360-2003(R2009) Energy Performance, Water Consumption and Capacity of Household Clothes Washers
AWWA WQTC69303 Quantification of the Hydroxyl Radical Scavenging Capacity during Advanced Oxidation Treatment
CAN/CSA C360-2003(R2009) Energy Performance, Water Consumption and Capacity of Household Clothes Washers
CAN/CSA C360-2013(R2023) Energy Performance, Water Consumption and Capacity of Household Clothes Washers
DANSK DS/EN 15776:2022 Unfired pressure vessels – Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 %
DIN EN 15776 E:2019 Draft Document - Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessels parts constructed from cast iron with an elongation after fracture equal or less than 15 %; German and English version prEN...
07/30162647 DC BS ISO 7743. Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
10/30193402 DC BS ISO 7743. Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties
10/30196866 DC BS ISO 37. Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
AWWA ACE65297 Measuring Affordability

American Welding Society (AWS)

WRC 034:1957 Computation of the Stresses from Local Loads in Spherical Pressure Vessels or Pressure Vessel Heads

KR-KS

KS D ISO 13756-2023 Determination of silver in silver jewellery alloys — Volumetric(potentiometric) method using sodium chloride or potassium chloride
KS M ISO 37-2022 Rubber, vulcanized or thermoplastic Determination of tensile stress strain properties
KS M ISO 7743-2016 Rubber, vulcanized or thermoplastic－Determination of compression stress-strain properties

WRC - Welding Research Council

BULLETIN 34-1957 COMPUTATION OF THE STRESSES FROM LOCAL LOADS IN SPHERICAL PRESSURE VESSELS OR PRESSURE VESSEL HEADS
BULLETIN 194-1974 FATIGUE BEHAVIOR OF PRESSURE-VESSEL STEELS

FI-SFS

SFS 2087-1966 Liquefied petroleum gas cylinder capacity 11 or 19kg for motor vehicles
SFS 2614-1970 Design of pressure vessels. Internal or external pressure on the vaulted roof

ZA-SANS

SANS 5883:2008 Resistance of vulcanized rubbers to swelling (volumetric method)
SANS 10037:2003 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
SANS 7743:2003 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties

DE-GPVA

AD 2000-Merkblatt HP801 No.19-2002 Manufacture and testing of pressure vessels.Special pressure vessels.Pressure vessels with lining or masonry lining
AD 2000-Merkblatt B3-2011 Design of pressure vessels.Domed ends subject to internal or external pressure
AD 2000-Merkblatt HP801 No.25-2004 Manufacture and testing of pressure vessels.Special pressure vessels.Liquefied gas storage vessel installation
AD 2000-Merkblatt B 5-2016 eng Manufacture and testing of pressure vessels. Performance of pressure tests
AD 2000-Merkblatt HP30-2016 Manufacture and testing of pressure vessels. Performance of pressure tests

German Institute for Standardization

DIN EN 13799:2020 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels; German and English version prEN 13799:2020
DIN EN 286-1:1998 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; German version EN 286-1:1998
DIN EN 15007:2006 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans; English version of DIN EN 15007:2006-12
DIN EN 286-1:1998-08 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; German version EN 286-1:1998 / Note: To be replaced by DIN EN 286-1 (2019-11).*To be amended by DIN EN 286-1/A2 (2005-05).
DIN EN 13799:2022-12 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels; German version EN 13799:2022
DIN EN 286-1/A2:2005-12 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; German version EN 286-1:1998/A2:2005 / Note: To be replaced by DIN EN 286-1 (2019-11).
DIN EN 286-1:2019-11 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; German and English version prEN 286-1:2019 / Note: Date of issue 2019-10-04*Intended as replacement for DIN EN 286-1 (1998-08), DIN EN ...
DIN EN 13799:2022 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
DIN EN 15776:2022-09 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessels parts constructed from cast iron with an elongation after fracture equal or less than 15 %; German version EN 15776:2022
DIN EN 15776:2022 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessels parts constructed from cast iron with an elongation after fracture equal or less than 15 %
DIN EN 286-1/A1:2002-12 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes; Amendment A1; German version EN 286-1:1998/A1:2002 + AC:2002 / Note: To be replaced by DIN EN 286-1 (2019-11).
DIN EN 13352:2012 Specification for the performance of automatic tank contents gauges; German version EN 13352:2012

ITU-T - International Telecommunication Union/ITU Telcommunication Sector

ITU-T Y.2304-2017 Network intelligence capability enhancement – Requirements and capabilities to support mobile content delivery optimization (Study Group 13)

Japanese Industrial Standards Committee (JISC)

JIS K 6254:2016 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties
JIS K 6254:2010 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties
JIS K 6955:2006 Plastics -- Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
JIS K 6254:2003 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties at low deformation

Danish Standards Foundation

DS/EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
DS/EN 286-1/A1:2003 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
DS/EN 286-1/A2:2005 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
DS/EN 286-1/AC:2002 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
DS/EN 286-1:1999 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes

Lithuanian Standards Office

LST EN 13799-2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
LST EN 286-1-2000/A1-2003 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
LST EN 286-1-2000 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
LST EN 286-1-2000/AC-2003 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
LST EN 286-1-2000/A2-2005 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
LST EN 286-1-2000/1K-2001 Simple unfired pressure vessels designed to contain air or nitrogen. Part 1: Pressure vessels for general purposes

AENOR

UNE-EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
UNE-EN 286-1:1999 SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN. PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES.
UNE-EN 286-1:1999/A2:2006 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
UNE-EN 286-1/A1:2003 Simple unfired pressure vessels designed to contain air or nitrogen. Part 1: Pressure vessels for general purposes.
UNE 9106:1992 BOILERS, ECONOMIZERS, REHEATERS, SUPERHEATERS AND PRESSURE VESSELS. QUALITY CONTROL DOSSIER.

Korean Agency for Technology and Standards (KATS)

KS D ISO 13756-2003(2018) Determination of silver in silver jewellery alloys－Volumetric(potentiometric) method using sodium chloride or potassium chloride
KS D ISO 13756:2003 Determination of silver in silver jewellery alloys－Volumetric(potentiometric) method using sodium chloride or potassium chloride
KS B ISO 1607-2:2013 Positive-displacement vacuum pumps－Measurement of performance characteristics－ Part 2：Measurement of ultimate pressure
KS B ISO 1607-2:2004 Positive-displacement vacuum pumps-Measurement of performance characteristics- Part 2:Measurement of ultimate pressure
KS M ISO 37-2007(2017) Rubber, vulcanized or thermoplastic－Determination of tensile stress－strain properties
KS M ISO 7743-2016(2021) Rubber, vulcanized or thermoplastic－Determination of compression stress-strain properties
KS B ISO 1607-2-2013 Positive-displacement vacuum pumps－Measurement of performance characteristics－ Part 2：Measurement of ultimate pressure
KS B ISO 1607-2-2004(2009) Positive-displacement vacuum pumps－Measurement of performance characteristics－ Part 2：Measurement of ultimate pressure
KS M ISO 6914:2015 Rubber, vulcanized or thermoplastic－Determination of ageing characteristics by measurement of stress relaxation in tension
KS M ISO 6914:2010 Rubber, vulcanized or thermoplastic-Determination of ageing characteristics by measurement of stress relaxation in tension
KS B ISO 5596-2023 Hydraulic fluid power－Gas－loaded accumulators with separator－Ranges of pressures and volumes and characteristic quantities
KS I ISO 15970-2010(2016) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor

GSO

GSO ISO/TR 14179-2:2009 Gears - Thermal capacity – Part 2: Thermal load-carrying capacity
OS GSO EN 286-1:2011 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
GSO EN 286-1:2011 Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes
GSO ISO 37:2022 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
BH GSO ISO 37:2023 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
ISO 37:2024 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
GSO ISO 13756:2021 Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride

AT-ON

ONORM M 7309-1988 Dished ends of boilers or pressure vessels ander internal or external pressure; design
ONORM M 7321-1980 Quick opening devices on boilers or pressure vessels
ONORM M 7320-1992 Inspection openings in Shells of boilers or pressure vessels
ONORM M 7356-1997 Pressure vessels to contain air or nitrogen as well as resulting loaded liquids - Installation, equipment, Operation
ONORM M 7308-1992 Fiat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pressure - Design and calculation
ONORM ISO 5596:1983 Hydraulic fluid power; gas-loaded accumulators with Separators; ranges of pressures and volumes, charakteristic quantities and identification
ONORM M 7306-1992 Fiat heads and Covers of boilers or pressure vessels under internal or external pressure - Design and calculation
ONORM M 7307 Teil.3-1985 Evaluation of stress analyses on boilers or pressure vessels; stress limits for cyclic loadings
ONORM M 7316 Teil.1-1987 Calculation offlanged joints on boilers or pressure vessels
ONORM M 7307 Teil.1-1981 Evaluation of stress analyses on boilers or pressure vessels; terms and basic requirements
ONORM M 7307 Teil.2-1981 Evaluation of stress analyses on boilers or pressure vessels; stress limits for primarily noncyclic loadings

SE-SIS

SIS SS-ISO 1827:1992 Rubber, vulcanized or thermoplastic — Determination of modulus in shear or adhesion to rigid plates — Quadruple shear method

International Electrotechnical Commission (IEC)

IEC White Paper RE-EES:2012 Grid integration of large-capacity Renewable Energy sources and use of large-capacity Electrical Energy Storage

HU-MSZT

MNOSZ 4840-51K-1953 Design the installation of electromechanical capacitors of 1KV or less
MSZ KGST 1104-1978 Battery ignition capacity and content capacity

RO-ASRO

STAS 8241-1968 Chemical Equipment. Steel or cast iron oval observation door for pressure vessels. Grading

European Committee for Standardization (CEN)

EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density@ pressure@ temperature and compression factor
EN 15007:2017 Aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
EN 15007:2006 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
EN 13799:2022 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
EN 13799:2012 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels

IT-UNI

UNI ISO 6914:2021 Rubber, vulcanized or thermoplastic -- Determination of ageing characteristics by measurement of stress relaxation in tension
UNI 6829-1971 P Container barrels used to hold liquid chemicals. Observation hole covers, gravity loading devices and pressure and/or gravity discharge devices

RU-GOST R

GOST 13904-2005 Glass containers. Methods of testing the resistance to internal hydrostatic pressure
GOST 13904-1993 Glass containers. Test methods for determining the resistance to internal pressure
GOST 13904-1985 Glass containers. Test methods for resistance by internal pressure
GOST 32433-2013 Testing of chemicals of environmental hazard. Ready biodegradability - CO2 in sealed vessels

VN-TCVN

TCVN 4509-2006 Rubber, vulcanized or thermoplastic.Determination of tensile stress-strain properties

GOSTR

GOST 13904-2019 Glass packing. Methods of testing the resistance to internal hydrostatic pressure

TH-TISI

TIS 1847-1999 Rubber vulcanized or thermoplastic.determination of tensile stress.strain properties

ACI - American Concrete Institute

ACI 544.9R-2017 Report on Measuring Mechanical Properties of Hardened Fiber-Reinforced Concrete

Indonesia Standards

SNI 07-3037-1992 Carbon steel forgings for pressure vessels

CZ-CSN

CSN 72 1565 Cast.9-1985 Testing of brick clays. Determination of the ageing ability
CSN 25 7502-1966 Dosing volumetric measuring apparatuses for liquids. Basic regulations
CSN 69 0202-1975 Chemical equipments. ominal volumes of vessels nd apparatuses

ES-UNE

UNE-EN 13799:2023 LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels
UNE-EN 15776:2023 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 %

BE-NBN

NBN E 48-103-1988 Hydraulic transmission. Pumps and capacity engines. Determination of cylinder working capacity. Measurement

API - American Petroleum Institute

API PUBL 4454-1987 Capability of EPA Methods 624 and 625 to Measure Appendix IX Compounds

GM Europe

GME 8713-2007 Fuel Tank Capacity and Fill Performance

Alliance of Telecommunications Industry Solutions （ATIS)

ATIS 0700018-2015 Capacity and Performance of TDMA-SC RTT

Others: secretory capacity or capacity