Particulate matter in the air and its classification

Particulate matter in the air and its classification, Total:326 items.

The international standard classification for "Particulate matter in the air and its classification" includes: Ambient atmospheres , Natural gas , Chemical analysis , Hydraulic fluids , Occupational safety. Industrial hygiene .

The Chinese standard classification for "Particulate matter in the air and its classification" includes: Environmental sanitation , Natural gas , Industrial gas and chemical gas , Analysis methods for toxic substances in atmosphere , Hydraulic fluid , Labor sanitation .

未注明发布机构

ASTM RR-D02-1012 1975 D2276-Test for Particulate Contaminant in Aviation Turbine Fuels
DIN EN ISO 10882-1:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
VDI 2463 Blatt-3 E:2022-08 Particulate matter measurement – Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air – Active sampling via low-volume sampler (LVS)
DIN ISO 16000-34 E:2017-04 Indoor air - Part 34: Strategies for the measurement of airborne particles
VDI 2267 Blatt 4-2023 Determination of suspended matter in ambient air - Measurement of the concentration of total gaseous mercury after manual sampling
VDI 2267 Blatt-4 E:2022-02 Determination of suspended matter in ambient air – Measurement of the concentration of total gaseous mercury after manual sampling
VDI 2267 Blatt 4-2023 Determination of suspended matter in ambient air - Measurement of the concentration of total gaseous mercury after manual sampling
ASTM RR-D22-1029 2000 D6484-Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
DIN EN ISO 23861 E:2021-10 Requirements for measurement procedures for the evaluation of chemical agents present in the form of mixtures of airborne particles and vapors in workplace air using samplers (draft)

Professional Standard - Agriculture

空气和废气监测分析方法 3.2.2-2003 Part 3 Air Quality Monitoring Chapter 2 Particulate Matter and Its Elements 2 PM10
空气和废气监测分析方法 7.5.4-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter Five Particle Composition Spectrum Establishment Four Source and Receptor Composition Spectrum Data Evaluation
空气和废气监测分析方法 7.2.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources—Classification of Particulate Matter Pollutio
642药典中药成方制剂卷-2010 Various Discussions on Internal Medicine XIV. Qi Regulating Agents (2) Li Qi and Zhongweisu Granules
空气和废气监测分析方法 7.2.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources Three-source Sample Collection Methods
空气和废气监测分析方法 7.2.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources 2 Other Classification Methods
空气和废气监测分析方法 3.2.4-2003 Part 3 Air Quality Monitoring Chapter 2 Particulate Matter and Its Elements Tetramercury
空气和废气监测分析方法 3.2.6-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Six Arsenic
空气和废气监测分析方法 3.2.9-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Nine Antimony
626药典中药成方制剂卷-2010 Sections on Internal Medicine XIV. Qi Regulating Agents (2) Qi Regulating and Zhongyesu Granules
空气和废气监测分析方法 3.2.10-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Beryllium
空气和废气监测分析方法 3.2.1-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements—TSP
空气和废气监测分析方法 3.2.7-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Seven Selenium
空气和废气监测分析方法 7.5.2-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter
空气和废气监测分析方法 7.5.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter
空气和废气监测分析方法 3.2.5-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Five Lead
空气和废气监测分析方法 3.2.3-2003 Part 3 Air Quality Monitoring Chapter 2 Particulate Matter and Its Elements 3 Dust Reduction
空气和废气监测分析方法 3.2.8-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Element Octachrome (hexavalent)
空气和废气监测分析方法 7.5.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 5 Establishment of Particulate Matter Composition Spectrum Three Sources and Receptor Chemical Composition Scope
空气和废气监测分析方法 3.2.11-2003 Part Three Air Quality Monitoring Chapter Two Particulate Matter and Its Elements Eleven Iron

中华人民共和国国家卫生和计划生育委员会

GB/T 17095-1997 Hygienic standard for inhalable particulate matter in indoor air
WS/T 206-2001 Method for determination of inhalable particulate matter (PM10) in air of public place. Light scattering method

Anhui Provincial Standard of the People's Republic of China

DB34/T 392-2004 Test method for laser determination of inhalable particulate matter in indoor air

Jiangxi Provincial Standard of the People's Republic of China

DB36/T 1932-2024 Determination of ambient air particulate matter β-ray method

Group Standards of the People's Republic of China

T/SAEPI 011-2022 Particle filter for air cleaner
T/CAEPI 27-2020 Technical requirement for agglomeration equipment of flue gas particles
T/CAQI 35-2017 Graduation for particle purifying performance of fresh air type air cleaner
T/YCXGH 003-2023 Determination of Polycyclic Aromatic Hydrocarbons in particle-phase of incense after burning Gas chromatography mass spectrometer method
T/SAEPI 003-2019 Commercial Indoor Particles Concentration Detection System
T/CAQI 17-2016 Graduation for particle purifying performance of filter-type air cleaner

Professional Standard - Environmental Protection

HJ 1263-2022 Ambient air―Determination of total suspended particle ―Gravimetric method
HJ 1271-2022 Ambient Air-Determination of formic acid, acetic acid and oxalic acid in particulate matter-Ion chromatography
HJ 1133-2020 Ambient air and waste gas－Determination of arsenic, selenium, bismuth, antimony in ambient particle matter－Atomic fluorescence spectrometry
HJ 647-2013 Ambient air and stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons - High performance liquid chromatography
HJ 93-2013 Specifications and Test Procedures for PM10 and PM2.5 Sampler
HJ 646-2013 Ambient air and stationary source emissions - Determination of gas and particle-phase polycyclic aromatic hydrocarbons with gas chromatography/mass spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 27893-2011 Natural gas—Determination of particles content—Gravimetric method
GB/T 26570.1-2011 Determination of particle in gases—Light-scattering method—Part 1:Determination of particle in pipeline gases
GB/T 15432-1995 Ambient air －Determination of total suspended particulates －Gravimetric method

国家林业局

LY/T 2669-2016 Technical regulations for monitoring air particulate matter in forests

Professional Standard - Construction Industry

JG/T 5089-1997 Determination of solid particulate contaminant in fluids by the automatic particle counting method

Occupational Health Standard of the People's Republic of China

GBZ/T 192.6-2018 Determination of dust in the air of workplaces - Part 6: Total number concentration of ultrafine and fine particles

Professional Standard - Hydroelectric Power

SD 313-1989 Method for measuring particle number and size distribution in oil (automatic particle counter method)

Shandong Provincial Standard of the People's Republic of China

DB37/T 4378-2021 Ambient air—Determination of particulate matter—Portable beta-ray method

廊坊市市场监督管理局

DB1310/T 225-2020 Method for determining the ability of woody plants to absorb airborne particles

PT-IPQ

NP 114-1957 Cork particles. Related definitions and classifications
NP 115-1957 Cork particles. Specific gravity and content in humid environment
NP 3862-1-2001 Solid fuels Médium and High-Rank coals Size analysis by sieving
NP 3862-1999 Solid fuels. Medium and High-Rank coals. Size analysis by sieving
E 245-1971 For analysis of inert material particles in cement slurry and concrete

Association of German Mechanical Engineers

VDI 2463 Blatt 4-1976 Particulate matter measurement; Measurement of particulate matter in ambient air; LIB-filter method
VDI 3491 Blatt 1-1980 Particulate matter measurement; characteristics of suspended particulate matter in gases; terms and definitions
VDI 2267 Blatt 2-1983 Determination of suspended particulates in ambient air; measurement of lead by X-ray fluorescence

British Standards Institution (BSI)

BS ISO 16000-34:2018 Indoor air. Strategies for the measurement of airborne particles
BS ISO 11041:1996(1998) Workplace air — Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour — Method by hydride generation and atomic absorption spectrometry
BS ISO 30011:2010 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
23/30423411 DC BS ISO 19996. Charge conditioning of aerosol particles for particle characterization and the generation of calibration and test aerosols
BS ISO 8573-4:2019 Compressed air. Contaminant measurement - Particle content
DD CEN/TS 15439:2006 Biomass gasification. Tar and particles in product gases. Sampling and analysis
BS EN 481:1993(1999)*BS 6069-3.5:1993 Workplace atmospheres — Size fraction definitions for measurement of airborne particles
DD ENV 13936-2001 Workplace atmospheres. Measurement of chemical agents present as mixtures of airborne particles and vapour. Requirements and test methods
23/30441434 DC BS EN ISO 10882-1. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone - Part 1. Sampling of airborne particles
BS EN 16450:2017 Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)
BS ISO 10362-1:2019 Cigarettes. Determination of water in total particulate matter from the mainstream smoke. Gas-chromatographic method
BS ISO 11041:1996 Workplace air. Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour. Method by hydride generation and atomic absorption spectrometry
BS ISO 15202-3:2004 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Analysis
21/30394853 DC BS EN ISO 23861. Workplace air. Chemical agent present as a mixture of airborne particles and vapours. Requirements for evaluation of measuring procedures using samplers
BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
BS ISO 15202-1:2020 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sampling
BS ISO 14411-2:2020 Preparation of particulate reference materials - Polydisperse spherical particles

IX-EU/EC

1999/30/EC-1999 Council Directive Relating to Limit Values for Sulphur Dioxide, Nitrogen Dioxide and Oxides of Nitrogen, Particulate Matter and Lead in Ambient Air

Institute of Environmental Sciences and Technology

IEST G-CC1002-1999 Determination of the Concentration of Airborne Ultrafine Particles

SCC

NS 4854:1981 Air quality - Determination of particulate lead in ambient air
VDI 3867 BLATT 4-2011 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Optical aerosol spectrometer
VDI 3867 BLATT 5-2013 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Time of flight spectrometer
VDI 3867 BLATT 4-2011 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Optical aerosol spectrometer
DANSK DS/EN ISO 10882-1:2011 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
VDI 3867 BLATT 1-2009 Measuring particles in the outdoor air — Determination of particle number concentration and number size distribution of aerosols — Basics
VDI 3867 BLATT 3-2012 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Electrical mobility spectrometer
DANSK DS/EN 481:1994 Workplace atmospheres - Size fraction definitions for measurement of airborne particles
DIN 25423 Supplement 1 E:1999 Draft Document - Sampling procedures for the monitoring of radioactivity in air - Instructions for the calculation of depositional losses of aerosol particles and gaseous iodine compounds and for calculation of changes of aerosol particle concentration
VDI 2463 BLATT 8-2014 Measuring particles — Detection of suspended dust in outdoor air and indoor air — Non-fractional sampling system for low-volume samplers (LVS)
DANSK DS/EN ISO 13982-1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
VDI 3867 BLATT 3-2012 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Electrical mobility spectrometer
VDI 2463 BLATT 1-1999 Measuring particles — Gravimetric determination of the mass concentration of particles in the ambient air — Basics
DANSK DS/EN ISO 13982-1/A1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
VDI 3867 BLATT 6-2012 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Electrical low pressure impactor (ELPI)
AENOR UNE-EN ISO 16890-1:2017 Air filters used in general ventilation. Part 1: Technical specifications, requirements and classification according to efficiency based on particulate matter (PM). (ISO 16890-1:2016).
VDI 3867 BLATT 1-2009 Measuring particles in the outdoor air — Determination of particle number concentration and number size distribution of aerosols — Basics
VDI 3867 BLATT 5-2013 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Time of flight spectrometer
VDI 3867 BLATT 6-2012 Measuring particles in the outside air — Determination of particle number concentration and number size distribution of aerosols — Electrical low pressure impactor (ELPI)
VDI 3867 BLATT 2-2008 Measuring particles in the outside air — Characterization of test aerosols — Determination of particle number concentration and number size distribution — Condensation particle counter (CPC)
VDI 2463 BLATT 7-2014 Measuring particles — Detection of suspended dust and gaseous chemical compounds in outdoor and indoor air — Active sampling using low-volume samplers (LVS)
DANSK DS/ISO 16000-34:2018 Indoor air – Part 34: Strategies for the measurement of airborne particles
AWWA MTC93019 Nanofiltration Fouling by Natural Organic Matter and Role of Particles in Flux Enhancement
AWWA ACE65613 Air or Particles — What Are the Turbidity Spikes in My Membrane Effluent
VDI 2267 BLATT 7-1988 Determination of substances in particles in the outside air; measurement of thallium and its inorganic compounds as components of dust precipitation using atomic absorption spectrometry
DANSK DS/ISO 21832:2019 Workplace air – Metals and metalloids in airborne particles – Requirements for evaluation of measuring procedures
10/30201065 DC BS EN ISO 13138. Air quality. Sampling conventions for airborne particle deposition in the human respiratory system
VDI 3867 BLATT 2-2008 Measuring particles in the outside air — Characterization of test aerosols — Determination of particle number concentration and number size distribution — Condensation particle counter (CPC)
AS 2724.3:1984 Ambient air - Particulate matter - Part 3: Determination of total suspended particulates (TSP) - High volume sampler gravimetric method
SN-CEN/TS 15439:2006 Biomass gasification — Tar and particles in product gases — Sampling and analysis
BS EN ISO 10882-1:2001 Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone-Sampling of airborne particles
BS EN ISO 10882-1:2024 Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone-Sampling of airborne particles
NS-EN 481:1993 Workplace atmospheres — Size fraction definitions for measurement of airborne particles
NS-EN ISO 23861:2022 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
AS 2724.2:1987 Ambient air - Particulate matter - Part 2: Determination of suspended matter expressed as equivalent black smoke by filter paper soiling
CAN 2-115.10-M80-1980 Filters, Air, Disposable, for Removal of Particulate Matter from Ventilating Systems
NS-EN ISO 10882-1:2024 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2024)
VDI 2463 BLATT 1-1999 Measuring particles — Gravimetric determination of the mass concentration of particles in the ambient air — Basics
NS-EN ISO 10882-1:2001 Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles (ISO 10882-1:2001)
DANSK DS/ISO 23861:2022 Workplace air – Chemical agent present as a mixture of airborne particles and vapor – Requirements for evaluation of measuring procedures using samplers
NS-EN ISO 10882-1:2011 Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles (ISO 10882-1:2011)
CAN 2-115.15-M80-1980 Filter, Air, High Efficiency, Rigid Type, for Removal of Particulate Matter from Ventilating Systems
NS-EN ISO 21832:2020 Workplace air — Metals and metalloids in airborne particles — Requirements for evaluation of measuring procedures (ISO 21832:2018)
DANSK DS/EN ISO 21832:2020 Workplace air – Metals and metalloids in airborne particles – Requirements for evaluation of measuring procedures (ISO 21832:2018)
UNE-EN ISO 10882-1:2001 Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operators breathing zone. Part 1: Sampling of airborne particles. (ISO 10882-1:2001)
AENOR UNE-EN ISO 10882-1:2012 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
VDI 2268 BLATT 3-1988 Determination of substances on particles; determination of thallium in emitted dust using atomic absorption spectrometry
DANSK DS/EN ISO 23861:2022 Workplace air – Chemical agent present as a mixture of airborne particles and vapour – Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
UNE 81599:1996 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF AIRBONE PARTICULATE MATTER (INHALABLE AND RESPIRABLE PRACTIONS). GRAVIMETRIC METHOD.
NS 4861:1985 Air quality - Emission measurements - Sampling strategy for particulates in ducts and stacks
DIN EN ISO 23861 E:2021 Draft Document – Workplace air – Chemical agent present as a mixture of airborne particles and vapours – Requirements for evaluation of measuring procedures using samplers (ISO/DIS 23861:2021); German and English version prEN ISO 23861:2021
DANSK DS/ISO 21501-4:2007 Determination of particle size distribution – Single particle light interaction methods – Part 4: Light scattering airborne particle counter for clean spaces
VDI 3871-2018 Measuring particles in the outdoor air — Electrical aerosol monitors based on diffusion charging (DCAM)
NS-EN ISO 13982-1:2004 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
DIN EN ISO 10882-1 E:2009 Draft Document - Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2009); German version prEN ISO 10882-1:2009
09/30144529 DC BS EN ISO 10882-1. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Part 1. Sampling of airborne particles
DANSK DS/CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis
AENOR UNE-EN ISO 13982-1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
DANSK DS/EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system
AENOR UNE-EN ISO 13982-1/A1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
VDI 3871-2018 Measuring particles in the outdoor air — Electrical aerosol monitors based on diffusion charging (DCAM)
DANSK DS/ISO 10362-1:2019 Cigarettes – Determination of water in total particulate matter from the mainstream smoke – Part 1: Gas-chromatographic method
NS-EN 14902:2005 Ambient air quality — Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
AWWA WQTC50485 A Study of the Role of Air-borne Particulates as the Cause of Unexplained Coliform Contamination in Drilled Wells
DANSK DS/EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DANSK DS/EN 14902/AC:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
DIN ISO 16000-34 E:2017 Draft Document - Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO/DIS 16000-34:2017); Text in German and English
UNE-ENV 13936:2002 Workplace atmospheres - Measurement of chemical agents present as mixtures of airborne particles and vapour - Requirements and test methods.

International Organization for Standardization (ISO)

ISO 16000-34:2018 Indoor air - Part 34: Strategies for the measurement of airborne particles
ISO 10882-1:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
ISO/DIS 19996:2011 Charge conditioning of aerosol particles for particle characterization and the generation of calibration and test aerosols
ISO/CD 19996 Charge conditioning of aerosol particles for particle characterization and the generation of calibration and test aerosols
ISO/FDIS 19996:2024 Charge conditioning of aerosol particles for particle characterization and the generation of calibration and test aerosols
ISO/DIS 10882-1 Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles
ISO 15202-3:2004 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis
ISO 21832:2018 Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures
ISO 13982-1:2004/Amd 1:2010 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (ty
ISO 15202-2:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation
ISO 15202-2:2001 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation
ISO 10362-1:2019 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
ISO 8518:2001 Workplace air - Determination of particulate lead and lead compounds - Flame or electrothermal atomic absorption spectrometric method
ISO 10882-2:2000 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases
ISO 15202-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 15202-1:2000 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling

Association Francaise de Normalisation

NF X43-404-34*NF ISO 16000-34:2019 Indoor air - Part 34 : strategies for the measurement of airborne particles
NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
NF EN ISO 13138:2012 Air quality - Conventions for sampling airborne particles based on their deposition in human respiratory tracts
NF EN ISO 21832:2020 Workplace air - Metals and metalloids in airborne particles - Requirements for the evaluation of measurement procedures
NF X43-265-3*NF ISO 15202-3:2005 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3 : analysis
NF EN ISO 14644-1:2016 Clean rooms and related controlled environments - Part 1: classification of particulate air cleanliness
NF X43-905:2016 Biomonitoring of air - Passive biomonitoring of atmospheric mineral contaminants in particulate deposits on conifer needles
NF ISO 8573-4:2019 Air comprimé - Mesurage des polluants - Partie 4 : teneur en particules
NF V37-011-1*NF ISO 10362-1:2020 Cigarettes - Determination of water in total particulate matter from the mainstream smoke - Part 1 : gas-chromatographic method
NF X31-516:2007 Qualité du sol - Fractionnement granulodensimétrique des matières organiques particulaires du sol dans l'eau
NF EN 14902:2005 Ambient air quality - Standard method for measuring lead, cadmium, arsenic and nickel in the PM10 fraction of suspended particulate matter
NF X43-267:2004 Workplace atmosphere - Measurement of chemical agents present as mixtures of airborne particles and vapour - Requirements and test methods.
NF ISO 10362-1:2020 Cigarettes - Determination of water in the total particulate matter of the main stream of smoke - Part 1: gas chromatography method

GOSTR

GOST R ISO 16000-34-2020 Indoor air. Part 34. Strategies for the measurement of airborne particles

API - American Petroleum Institute

API 4348-1982 ELEMENTS OF AIRBORNE PARTICLE BEHAVIOR IN THE UNITED STATES
API 922-1961 REMOVAL OF PARTICULATE MATTER FROM GASEOUS WASTES FILTRATION
API 26-60070- AIR QUALITY MONOGRAPHS Monograph #75-23 Gaseous and Particulate Sulfur Compounds in Urban Atmospheres

Korean Agency for Technology and Standards (KATS)

KS I ISO 13138:2020 Air quality — Sampling conventions for airborne particle deposition in the human respiratory system
KS B 6741-2002 MEASURING METHODS FOR AIRBORN PARTICLES IN CLEAN ROOM AND EVALUATING METHODS FOR AIR CLEANLINESS OF CLEAN ROOM
KS B 5645-2023 Automatic moniters for suspended particulate matter in ambient air
KS B 3278-1992 Automatic monitor for suspended particulate matter in ambient air
KS I ISO 30011-2012(2017) Workplace air－Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS I 2209-2008 Form, size and performance testing methods of filtration media for collecting airborne particulate matters
KS I ISO 15202-3:2005 Workplace air ― Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry ― Part 3: Analysis
KS I ISO 16740-2007(2017) Workplace air－Determination of hexavalent chromium in airborne particulate matter－Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
KS I ISO 8518-2006(2017) Workplace air－Determination of particulate lead and lead compounds(Flame electrothermal atomic absorption spectrometric method)
KS B 6331-2022 The determination of particulate contamination in hydraulic fluids by the particle count method
KS I ISO 15202-2:2008 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 2:Sample preparation
KS I ISO 15202-3:2021 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Analysis
KS I ISO 15202-2:2014 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation
KS I ISO 8518:2006 Workplace air－Determination of particulate lead and lead compounds(Flame electrothermal atomic absorption spectrometric method)
KS H ISO 10362-1:2020 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
KS I ISO 15202-1:2006 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 1:Sampling
KS I ISO 15202-1:2014 Workplace air — Determination of metals and metalloids in Workplace air — Determination of metals and metalloids in emission spectrometry — Part 1: Sampling
KS L 3001-2006 Classification and testing methods of refractory granular dolomite

KR-KS

KS I ISO 13138-2020 Air quality — Sampling conventions for airborne particle deposition in the human respiratory system
KS B 5645-2018(2023) Automatic moniters for suspended particulate matter in ambient air
KS I ISO 30011-2022 Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
KS I ISO 15202-3-2021 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 3: Analysis
KS H ISO 10362-1-2020 Cigarettes — Determination of water in total particulate matter from the mainstream smoke — Part 1: Gas-chromatographic method
KS I ISO 16740-2022 Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide

GSO

GSO ISO 10882-1:2015 Health and safety in welding and allied processes -- Sampling of airborne particles and gases in the operator's breathing zone -- Part 1: Sampling of airborne particles
GSO ISO 13982-1:2013 Protective clothing for use against solid particulates -- Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
BH GSO ISO 13982-1:2016 Protective clothing for use against solid particulates -- Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
GSO ISO 21501-4:2013 Determination of particle size distribution -- Single particle light interaction methods -- Part 4: Light scattering airborne particle counter for clean spaces
GSO ISO 30011:2017 Workplace air -- Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
BH GSO ISO 10882-1:2017 Health and safety in welding and allied processes -- Sampling of airborne particles and gases in the operator's breathing zone -- Part 1: Sampling of airborne particles
OS GSO ISO 30011:2017 Workplace air -- Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
OS GSO ISO 10882-1:2015 Health and safety in welding and allied processes -- Sampling of airborne particles and gases in the operator's breathing zone -- Part 1: Sampling of airborne particles
OS GSO 2026:2010 Measuring methods for suspended particulate matter concentration in air-general requirements
ISO 29463-1:2024 High efficiency filters and filter media for removing particles in air — Part 1: Classification, performance, testing and marking
GSO ISO 10473:2008 Ambient air-Measurement of the mass of particulate matter on a filter medium Beta-ray absorption method
GSO ISO 15202-3:2015 Workplace air -- Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry -- Part 3: Analysis
OS GSO ISO 15202-3:2015 Workplace air -- Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry -- Part 3: Analysis
BH GSO ISO 15202-3:2017 Workplace air -- Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry -- Part 3: Analysis
BH GSO ISO 15202-1:2022 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
GSO ISO 12500-3:2010 Filters for compressed air -- Test methods -- Part 3: Particulates
GSO ISO 15202-1:2021 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling

VDI - Verein Deutscher Ingenieure

VDI 2463 Blatt 8-2012 Particulate matter measurement - Non-fractionating sampling system for suspended particulate matter in ambient air and indoor air for low-volume sampler (LVS)
VDI 3867 Blatt 1-2006 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Fundamentals
VDI 3867 Blatt 3-2009 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 3867 Blatt 5-2010 Measurement of particles in ambient air - Determination of particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 2463 Blatt 7-2012 Particulate matter measurement - Sampling device for suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
VDI 3867 Blatt 2-2006 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 3871-2016 Messen von Partikeln in der Aussenluft - Elektrische Aerosolmonitore auf Basis der Diffusionsaufladung
VDI 2267 Blatt 4-1985 Determination of particulates in ambient air; measurement of lead@ cadmium and their inorganic compounds as part of the dust deposition by atomic absorption spectrometry
VDI 3867 Blatt 6-2009 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution - Electrical low pressure Impactor (ELPI)
VDI 2463 Blatt 1-1997 Messen von Partikeln - Gravimetrische Bestimmung der Massenkonzentration von Partikeln in der Aussenluft - Grundlagen
VDI 2267 Blatt 3-1983 Determination of suspended particulates in ambient air; measurement of lead by atomic absorption spectrometry
VDI 2267 Blatt 7-1986 Determination of particulates in ambient air; measurement of thallium in dust desposition by atomic absorption spectrometry
VDI 2267 Blatt 6-1987 Chemical analysis of suspended particulates in ambient air; measurement of the mass concentration of cadmium by atomic absorption spectrometry

IN-BIS

IS 5182 Pt.12-1974 Air Pollution Part XII Measurement Method of Polycyclic Aromatic Hydrocarbons in Air Particulate Matter
IS 5182 Pt.15-1974 Air pollution measurement methods Part XV Mass concentration of particulate matter in the atmosphere
IS 5182 Pt.3-1970 Air Pollution Part III Methods of measuring radioactivity (particles) in air

German Institute for Standardization

DIN ISO 16000-34:2019 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018)
DIN ISO 16000-34:2019-01 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018)
DIN ISO 16000-34 Berichtigung 1:2019-05 Indoor air - Part 34: Strategies for the measurement of airborne particles (ISO 16000-34:2018); Corrigendum 1
DIN EN ISO 13982-1:2011-02 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004 + Amd. 1:2010); Ger...
DIN EN ISO 10882-1:2012-01 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011); German version EN ISO 10882-1:2011
DIN EN ISO 21832:2020-08 Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures (ISO 21832:2018); German version EN ISO 21832:2020
DIN EN ISO 10882-1:2023-06 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2023); German and English version prEN ISO 10882-1:2023 / Note: Dat...
DIN CEN/TS 15439:2006-08 Biomass gasification - Tar and particles in product gases - Sampling and analysis; German version CEN/TS 15439:2006
DIN EN ISO 13138:2012-04 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012); German version EN ISO 13138:2012
DIN EN 16450:2017-07 Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5); German version EN 16450:2017
DIN ISO 10362-1:2021-02 Cigarettes - Determination of water in total particular matter from the mainstream smoke - Part 1: Gas-chromatographic method (ISO 10362-1:2019)
DIN EN 14902:2005-10 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005
DIN EN 14902 Berichtigung 1:2007-01 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006
DIN EN ISO 23861:2023 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)

RO-ASRO

STAS 10813-1976 Air purity DETERMINATION OF PARTICULATE MATTER

American Society of Mechanical Engineers (ASME)

ASME PTC 38-1980(R1985) Determining the Concentration of Particulate Matter in A Gas Stream
ASME PTC 38-1980 Determining the Concentration of Particulate Matter in a Gas Stream

NATO - North Atlantic Treaty Organization

AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (
STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4346-2000 Effects of Improved Residential Furnace Filtration on Airborne Particles
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 28-2008 AIR CLEANERS FOR PARTICULATE CONTAMINANTS
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 24-2004 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 24-2004 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 29-2012 AIR CLEANERS FOR PARTICULATE CONTAMINANTS
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 29-2012 AIR CLEANERS FOR PARTICULATE CONTAMINANTS
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 24-2000 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 24-1996 Air Cleaners for Particulate Contaminants
ASHRAE HVAC SYSTEMS AND EQUIPMENT IP CH 28-2008 AIR CLEANERS FOR PARTICULATE CONTAMINANTS
ASHRAE HVAC SYSTEMS AND EQUIPMENT SI CH 24-2000 Air Cleaners for Particulate Contaminants
ASHRAE OR-16-C023-2016 Evaluating Air-side Economizer Use in Particulate Air Pollution in Office Buildings in Multi-million Cities

Standard Association of Australia （SAA）

AS 3853.1:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of airborne particles
ISO 10882-1:2024 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
ISO 13982-1:2004/Amd.1:2010 Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) AMENDMENT 1

American Society for Testing and Materials (ASTM)

ASTM E1583-17 Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
ASTM D8358-21 Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter

RU-GOST R

GOST R ISO 21832-2021 Workplace air. Metals and metalloids in airborne particles. Requirements for evaluation of measuring procedures
GOST R ISO 13138-2014 Air quality. Sampling conventions for airborne particle deposition in the human respiratory system
GOST R ISO 30011-2017 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
GOST R EN ISO 13982-1-2009 Occupational safety standards system. Protective clothing for use against solid particulates. Part 1. Performance requirements for chemical protective clothing providing protection to full body against airborne solid particulates (type 5 clothing)

AENOR

UNE-EN 481:1995 WORKPLACE ATMOSPHERES. SIZE FRACTION DEFINITIONS FOR MEASUREMENT OF AIRBORNE PARTICLES.
UNE-EN ISO 10882-1:2012 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
UNE-EN ISO 13982-1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
UNE 51115:1985 PARTICULATE CONTAMINANT IN AVIATION TURBINE FUELS, TESTS FOR
UNE 81575:1998 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF PARTICULATE ARSENIC AND ARSENIC COMPOUNDS AND ARSENIC TRIOXIDE VAPOUR. METHOD BY HYDRIDE GENERATION/ATOMIC ABSORPTION SPECTROMETRY.
UNE 81587:2017 Workplace exposure. Determination of metals and metalloids in airborne particles. Atomic Spectrometry method.
UNE-EN ISO 13982-1:2005/A1:2011 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/AM 1:201

European Committee for Standardization (CEN)

prEN ISO 10882-1 rev Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
EN ISO 21832:2020 Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures (ISO 21832:2018)
CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis
prEN ISO 10882-1 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2023)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE EQUIP SI CH 28-2008 AIR CLEANERS FOR PARTICULATE CONTAMINANTS
ASHRAE SYSTEMS AND EQUIP IP CH 29-2012 AIR CLEANERS FOR PARTICULATE CONTAMINANTS

Danish Standards Foundation

DS/EN ISO 10882-1:2011 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
DS/CEN/TS 15439:2007 Biomass gasification - Tar and particles in product gases - Sampling and analysis
DS/EN ISO 13982-1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
DS/EN ISO 13982-1/A1:2010 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)

DIN

DIN EN ISO 13982-1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)

YU-JUS

JUS H.P5.011-1991 Testing of pesticides.Dusts,granules,microgranules and water-dispersible powder.Determination of bulk density

ES-UNE

UNE-EN ISO 21832:2021 Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures (ISO 21832:2018)
UNE-EN 14902:2006/AC:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

Japanese Industrial Standards Committee (JISC)

JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
JIS T 8157:2018 Powered air purifying respirator for particulate matter
JIS B 7954:2001 Automatic monitors for suspended particulate matter in ambient air
JIS Z 3284-2:2014 Solder paste -- Part 2: Test methods for solder particle shape, surface condition judgment, and particle size distribution
JIS B 9927-1:2022 High-efficiency filters (EPA, HEPA and ULPA) and filter media for removing particles in air -- Part 1: Classification, performance, testing and marking

SAE - SAE International

SAE ARP743C-2010 Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Manual Particle Count Method
SAE ARP743B-2001 Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Manual Particle Count Method
SAE ARP598A-1969 The Determination of Particulate Contamination in Liquids by the Particle Count Method
SAE ARP598B-1986 Determination of Particulate Contamination in Liquids by the Particle Count Method

Lithuanian Standards Office

LST EN ISO 13982-1:2005 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
LST EN ISO 10882-1:2012 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
LST EN ISO 13982-1:2005/A1:2011 Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) - Amendment 1 (ISO 13982-1:2004/Amd.1:20
LST ISO 11041:2003 Workplace air. Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour. Method by hydride generation and atomic absorption spectrometry (idt ISO 11041:1996)

North Atlantic Treaty Organization Standards Agency

STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

Society of Automotive Engineers (SAE)

SAE ARP598B-1991 THE DETERMINATION OF PARTICULATE CONTAMINATION IN LIQUIDS BY THE PARTICLE COUNT METHOD
SAE AIR4766/1-2018 Air Quality for Commercial Aircraft Cabin Particulate Contaminants

ES-AENOR

UNE 48 104 Coarse particles in pigments and dyes

AT-ON

ONORM M 5858-1997 Air analysis - Ambient air monitoring - Requirements for monitors for suspended particulate matter - Marking of conformity
ONORM M 9453-1976 Emission limits for air contaminants; particulate matter emitted from asphalt processing plants

Canadian General Standards Board （CGSB)

CGSB 115.10-M90-CAN/CGSB-1990 Disposable Air Filters for the Removal of Particulate Matter from Ventilating Systems
CGSB 115.14-M91-CAN/CGSB-1991 High Efficiency Cartridge Type Supported Air Filters for the Removal of Particulate Matter from Ventilating Systems

CEN - European Committee for Standardization

PD CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis

PL-PKN

PN Z04102-06-1986 Air purity protection Tests for cadmium and its compounds Determination of cadmium and its compounds in suspended particles in the ambient air (imision) by atomie absorption spectrometry
PN Z04139-05-1986 Air purity protection Tests for lead and its compounds Determination of lead and its compounds in suspended particies in the ambient air (imision) by atomie absorption spectrometry

GOST

GOST R 70230-2022 Air quality. Method for determining mass concentration suspended particles PM2.5, PM10 in the air of the working area based on analysis of fractional dust composition

CL-INN

INDITECNOR 67-1ch-1955 Graphical demonstration of particle analysis of refined materials and brush selection techniques

American Welding Society (AWS)

AWS F1.4-1997 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes

Others: Particulate matter in the air and its classification