c4 column c8 column

c4 column c8 column, Total:200 items.

The international standard classification for "c4 column c8 column" includes: Moulding equipment , Couplings , Bolts, screws, studs , Advanced ceramics , Deck equipment and installations , Wood, sawlogs and sawn timber , Implants for surgery, prosthetics and orthotics .

The Chinese standard classification for "c4 column c8 column" includes: Coal mine special equipment , Mine support equipment , Mould , Fastener , Special ceramics , Lathe , Deck fittings , Moulds , Clamping fixtures , Combination grippers , Measuring devices , Stem wood and raw wood , Orthopedic devices , Processing machinery for daily use glass, enamel and ceramic .

Professional Standard - Coal

MT 324-1993 Dual Column Side by Side Type Hydraulic Pressure Breaker Timbering
MT/T 542-1996 Monolithic pillar shoes
MT 542-1996 Column Shoe of Monomer Supporting Post
MT/T 324-1993 Double-column parallel hydraulic top-cut column

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13807.2-1992 Connections with waisted stud. Studs
GB/T 10433-2002 Cheese head studs for arc stud welding
GB/T 13807.2-2008 Connections with waisted stud - Studs
GB/T 45382-2025 Tools for moulding—Guide pillars, straight and shouldered, and locating guide pillars, shouldered
GB/T 41500-2022 Oxide ceramic plunger for plunger pump
GB/T 902.2-2010 Threaded studs for drawn arc stud welding with ceramic ferrule
GB/T 902.4-2010 Threaded studs with flange(pitch)and stud with internal thread for short-cycle drawn arc stud welding

Professional Standard - Machinery

JB/T 4116-1996 Single, double-column vertical lathe Accuracy inspection
JB/T 3665.1-1999 Single, double-column vertical lathe parameters
JB/T 3665-1996 Specifications for single-column and double-column vertical lathes

Professional Standard-Ships

CB/T 453-1995 Skyscreen Column
CB 609-1967 Rail stanchion and davit of engine and boiler room

Professional Standard - Aviation

HB 2211-1975 Guide post
HB 2190-1975 Guide post
HB 993-1989 Elevation pillar
HB 814-1990 Guide pillar
HB 4437-1990 Limited Posts
HB 3192-1992 Pull Column
HB 2523-1977 pillar
HB 5554-1983 Cylindrical spigot joint
HB 4416-1990 Guide pillar
HB 4336-1989 Guide Pillar Holder
HB 2189-1975 Angled guide post
HB 4556-1992 Supporting Column
HB 3609-1985 Extension spring pillars
HB 2029-1974 column stand
HB 3391-1982 Guide post
HB 993-1974 elevation column
HB 2149-1975 Guide post
HB 4216-1989 Parallel pin
HB 814-1975 Guide post
HB 3192-1979 pull column
HB 3610-1985 Extension spring pillars
HB 2149-1992 Guide Pillar
HB 3611-1985 roller
HB 2211-1992 Standard Die Set and Parts for Rubber Pressing Mold - Guide Pillar
HB 2029-1989 Column dial framework
HB 4048-1988 A Type Junction Pillar

Professional Standard - Aerospace

QJ 20042.1-2011 Stud with locked in-key locked-Part 1:Lightweight studs
QJ 669-1982 Guide post
QJ 671-1982 Small guide post

Taiwan Provincial Standard of the People's Republic of China

CNS 13535-1995 Angles and Slopes on Prisms
CNS 6763-1980 Parallel Shank Counterborer with Solid Pilot

Professional Standard - Forestry

LY/T1002-2012 Pole on the truck
LY/T 1002-2012 Pole on the truck
LY/T 1002-1991 car pillar

Professional Standard - Medicine

YY/T 0119.3-2014 Spinal implants―Components used in the surgical fixation of the spinal skeletal system―Part 3:Metallic spinal plates
YY/T 0119.4-2014 Spinal implants―Components used in the surgical fixation of the spinal skeletal system―Part 4:Metallic spinal rods
YY/T 0119.2-2014 Spinal implants―Components used in the surgical fixation of the spinal skeletal system―Part 2:Metallic spinal screws

Professional Standard - Light Industry

QB/T 3670-1999 Piston Pumps

Group Standards of the People's Republic of China

T/NWAX 002-2021 Moxa stick (cone)

Ente Nazionale Italiano di Unificazione

UNI ISO 8734:1991 Hardened cylindrical pins
UNI 5099-1962 Column mold base brake. guide pillar
UNI 5099:1962 Column type sow blocks. Pilot pins.
UNI EN 40-5:2003 Lighting columns - Requirements for steel lighting columns
EC 1-2007 UNI EN 40-5:2003 Lighting columns - Requirements for steel lighting columns
UNI EN 40-6:2001 Lighting columns - Specification for aluminium lighting columns.
UNI EN 28735:1993 Parallel pins with internal thread, hardened.

Japanese Industrial Standards Committee (JISC)

JIS B 1506:1991 Rollers for roller bearings
JIS B 1533:1993 Rolling bearings -- Cylindrical roller bearings
JIS B 1173:1995 Studs
JIS B 1533:2013 Rolling bearings.Cylindrical roller bearings
JIS B 1173:2010 Studs
JIS F 2001:1995 Bollards

British Standards Institution (BSI)

BS EN 40-5:2000 Lighting columns-Specification for steel lighting columns
BS EN 40-5:2002 Lighting columns - Requirements for steel lighting columns
BS EN 40-6:2002 Lighting columns - Requirements for aluminium lighting columns
BS ISO 9182-2:2013 Tools for pressing. Guide pillars. Type A, straight pillars
BS EN 40-6:2000 Lighting columns-Specification for aluminium lighting columns
BS ISO 10889-6:1997 Tool holders with cylindrical shank-Type E with cylindrical seat
BS 7568-27:1993 Press tools - Guide pillars - Type B, end-locking pillars
BS 7568-26:1993 Press tools - Guide pillars - Type A, straight pillars
BS 5649-4:1982 Lighting columns-Recommendations for surface protection of metal lighting columns
BS ISO 9182-2:2023 Tools for pressing. Guide pillars - Type A, straight pillars

American Bearing Manufacturers Association

ABMA 24.1-1989 Thrust Bearings of Ball, Cylindrical Roller and Spherical Roller Types - Metric Design

American Society of Mechanical Engineers (ASME)

ASME B18.31.2-2014 Continuous Thread Stud, Double-End Stud, and Flange Bolting Stud (Stud Bolt) (Inch Series)

German Institute for Standardization

DIN 32501-1:1991 Studs for stud welding with tip ignition; threaded studs
DIN 28007-1:1986-07 General tolerances for columns; columns for general use
DIN 28015:1987 Columns; plate column and packed column; main section, column section for exchange elements; dimensions
DIN 46262-2:1988-09 Low-voltage stud-terminals; bushing studs
DIN 69881-1 Tool holders with prism; prism, prism location; technical delivery conditions
DIN EN 40-6:2001 Lighting columns - Part 6: Requirements for aluminium lighting columns
DIN EN 40-6:2002-09 Lighting columns - Part 6: Requirements for aluminium lighting columns; German version EN 40-6:2002
DIN EN 40-5:2002-09 Lighting columns - Part 5: Requirements for steel lighting columns; German version EN 40-5:2002
DIN 71803 Berichtigung 1:2019-06 Angle joints with screw studs, with rivet studs; Corrigendum 1
DIN EN 40-6:1984 Lighting columns - Part 6: Requirements for aluminium lighting columns
DIN 1473:1978 Cylindrical Pins
DIN 5570-2:1990 Rail vehicles; externally mounted journal roller bearings with cylindrical roller bearings; component parts
DIN 69881-1:1987 Tool holders with prism; prism, prism location; technical delivery conditions
DIN EN 40-5:2001 Lighting columns - Part 5: Requirements for steel lighting columns
DIN 82607:1995-01 Double bollards
DIN 28007-1:2009-10 Tolerances for columns - Part 1: Columns of metallic materials
DIN 7:1956 Cylindrical pins
DIN 71803 :1988 Angle joints with screw studs, with rivet studs
DIN EN 40-6 E:1995-09 Lighting columns - Part 6: Requirements for aluminium lighting columns
DIN 5570-1:1990 Rail vehicles; externally mounted journal roller bearings cylindrical roller bearings; summary and layout

Gosstandart of Russia

GOST 22696-2013 Rolling bearings. Cylindrical rollers. Specifications
GOST 22696-1977 Rolling bearings. Short cylindrical rollers. Technical requirements

Standards Norway

NS 6275:1985 Weld studs with reduced base - Studs for drawn arc stud welding
NS-EN 40-6:2002 Lighting columns — Part 6: Requirements for aluminium lighting columns
NS-EN 40-5:2002 Lighting columns — Part 5: Requirements for steel lighting columns

International Organization for Standardization (ISO)

ISO/IEC 7816-2:1999/Amd 1:2004 Identification cards - Integrated circuit cards - Part 2: Cards with contacts - Dimensions and location of the contacts; Amendment 1: Assignment of contacts C4 and C8
ISO 2338:1986 Parallel pins, unhardened
ISO/FDIS 9182-4 Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
ISO 9182-2:2023 Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
ISO 9182-4:2023 Tools for pressing — Guide pillars — Part 4: Type C, pillars with taper lead and bush
ISO/FDIS 9182-2 Tools for pressing — Guide pillars — Part 2: Type A, straight pillars
ISO 13918:2017 Welding - Studs and ceramic ferrules for arc stud welding
ISO 13918:2008 Welding - Studs and ceramic ferrules for arc stud welding

Bureau of Indian Standards

IS 16925-2018 Tools for Moulding - Guide Pillars, Straight and Shouldered, and Locating Guide Pillars, Shouldered

Association Francaise de Normalisation

NF P97-413:2000 Lighting columns - Part 5 : specification for steel lighting columns.
NF P97-414:2000 Lighting columns - Part 6 : specification for aluminium lighting columns.
NF A87-021:1998 Welding. Studs and ceramic ferrules for arc stud welding.
NF E63-121:2006 Tool for pressing - Ball cage guiding pillars - End-locking pillars and pillars with taper lead and bush.

Belgian Standards Institute

NBN E 27-324-1987 Quenched cylindrical pin or positioning cylindrical pin

National Standardisation Body (ASRO)

STAS 11387-1990 Cylindrical roller radial cages. Dimensions

Swedish Institute for Standards

SIS SS 2874-1979 Lighting columns of steel tubes — Columns designed for recreation grounds
SS-ISO 8017:2007 Tools for moulding - Guide pillars, straight and shouldered, and locating guide pillars, shouldered (ISO 8017:2007, IDT)
SS 2874:1979 Lighting columns of steel tubes - Columns designed for recreation grounds
SIS SS 2605-1981 Guide pillars with shoulder

Korean Agency for Technology and Standards (KATS)

KS V 2011-2003 BOLLARDS
KS D 3600-2020 Tapered steel lighting pole
KS F 8017-2015 Guard post
KS F 8017-2012 Guard post
KS V 2011-1981 BOLLARDS
KS B ISO 8017-2023 Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered
KS B 2002-2016(2021) Rolling bearings — Rollers for roller bearings
KS D 3600-2020(2025) Tapered steel lighting pole
KS V 2011-1996(2001) BOLLARDS
KS B ISO 8017:2018 Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered
KS B 1037-2012(2017) Stud bolts
KS B 1037-2012(2022) Stud bolts
KS B 1037-1986 Stud bolts
KS B ISO 2338-2016(2021) Parallel pins
KS B ISO 9182-2-2004 Tools for pressing Guide pillars - Part 2 Type A, straight pillars
KS B ISO 2338:2016 Parallel pins
KS B ISO 10889-6-2013 Tool holders with cylindrical shank－Part 6：Type E with cylindrical seat
KS B ISO 9182-2:2009 Tools for pressing Guide pillars - Part 2 Type A, straight pillars
KS B ISO 8017-2018 Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered

American Welding Society (AWS)

WRC 493:2004 Guidelines for Modeling Cylinder-To-Cylinder Intersections
WRC 214:1976 Stud Welding

Aerospace Industries Association

AIA NA 0201-1985 Post, Electrical- Mechanical Equipment, Stud Type, Metric
AIA NA 0202-1985 Post, Electrical- Mechanical Equipment, Stud Type, Metric
AIA NA 0203-1985 Post, Electrical- Mechanical Equipment, Stud Type, Metric
AIA NA 0204-1985 Post, Electrical- Mechanical Equipment, Stud Type, Metric
AIA NAS493 Stud
AIA NA 0201-0204-1985 Post, Electrical- Mechanical Equipment, Stud Type, Metric
AIA NAS 1829-1989 Post, Electrical-Mechanical Equipment, Stud Type (Rev. 3)
AIA NA0201-0204 POST, ELECTRICAL, MECHANICAL EQUIPMENT STUD TYPE, METRIC

Magyar Szabványügyi Testület

MSZ 3085-1981 Pillar
MSZ 5205-1980 prism
MNOSZ 11381-1953 scaffolding support

European Committee for Standardization (CEN)

EN 40-5:2000 Lighting Columns - Part 5: Specification for Steel Lighting Columns Supersedes EN 40-3, EN 40-4 and EN 40-5;1982
EN 40-5:2002 Lighting columns - Part 5: Requirements for steel lighting columns
EN 40-6:2002 Lighting columns - Part 6: Requirements for aluminium lighting columns

American National Standards Institute （ANSI)

ANSI/ABMA 24.1-1989 Thrust Bearings of Ball, Cylindrical Roller and Spherical Roller Types - Metric Design

Danish Standards Foundation

DS/EN 40-5:2007 Lighting columns - Part 5: Requirements for steel lighting columns
DANSK DS/EN 40-5:2005 Lighting columns - Part 5: Requirements for steel lighting columns
DS/EN 40-6:2007 Lighting columns - Part 6: Requirements for aluminium lighting columns
DS/EN ISO 13918:2008 Welding - Studs and ceramic ferrules for arc stud welding

Society of Automotive Engineers (SAE)

ADS AS3344 Plunger
SAE AS3344-3-1953 AS3344 Plunger
ADS AS869 Control Column
SAE AS3354-2 AS3354 Plunger
ADS AS2553 Lock Plunger
SAE AS3354-2-1951 AS3354 Plunger
SAE AS4553-2 AS4553 Plunger
SAE AS3344-3 AS3344 Plunger
SAE AS4553-2-2015 AS4553 Plunger
SAE AS21447C BEARING, ROLLER, NEEDLE, TRACK ROLLER, CROWN RADIUSED OD INTEGRAL STUD, TYPE VII ANTIFRICTION, INCH

Welding Research Council

BULLETIN 493-2004 GUIDELINES FOR MODELING CYLINDER-TO-CYLINDER INTERSECTIONS
BULLETIN 214-1976 STUD WELDING

The Directorate General of Specifications and Metrology (DGSM)

OS GSO EN 40-5:2011 Lighting columns - Part 5: Requirements for steel lighting columns
OS GSO EN 40-6:2011 Lighting columns - Part 6: Requirements for aluminium lighting columns
OS GSO ISO 9182-2:2015 Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars
OS GSO ISO 6974-6:2009 Natural gas-determination of composition with defined uncertainty by gas chromatography-Part 6 :Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns

Lithuanian Standards Office

LST EN 40-6-2003 Lighting columns - Part 6: Requirements for aluminium lighting columns
LST EN 40-5-2002 Lighting columns - Part 5: Requirements for steel lighting columns

Czech Standards Institute (UNMZ)

CSN 49 1582-1980 Wooden poles
CSN 34 8340-1968 Lighting columns
CSN ON 22 5661-1966 Cylindrical handle
CSN 48 0082-1967 Poles and piles
CSN ON 13 3111-1962 Cylindrical hole
CSN 04 2156-1952 Core pillar. Flexible plug-in outer frame struts

US Federal Contractor Registration (USFCR)

FCR UFGS-33 05 16-2008 NCRETE POLES

American Petroleum Institute (API)

API REPORT 16-1980 Local Buckling of Cylindrical Tubular Columns Made of A-36 Steel

Engineering Sciences Data Unit (ESDU)

ESDU 84015 A-2012 Cylinder groups: mean forces on pairs of long circular cylinders

Canadian Standards Association (CSA)

CAN/CSA-A126.5-1987 Plinthes souples

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 2042-1986 Cylindrical pins
TCVN 1077-1986 Mining posts

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 9182-2:2017 Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars

Spanish Association for Standardization (UNE)

UNE-EN 40-5:2003 Lighting columns. Part 5: Requirements for steel lighting columns.

South African Bureau of Standard

CKS 82-1973 Steel posts, stays, standards, and droppers for strained wire fences

Association of German Mechanical Engineers

DVS 0905-1-1977 Quality assurance of stud welded joints; drawn stud welding and stud welding with ring ignition

Standard Association of Australia （SAA）

AS 1554.2:1993 Structural steel welding - Stud welding (steel studs to steel)

Finnish Standards Institute

SFS 2658-1974 Antenna material. Diagonal pillars of stone columns KVT