GB15577-2018

GB15577-2018, Total:202 items.

The international standard classification for "GB15577-2018" includes: Explosion protection .

The Chinese standard classification for "GB15577-2018" includes: Factory fire and blast protection technology .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 15577-2018 Safety regulations for dust explosion prevention and protection

Professional Standard - Traffic

JTG 3362-2018 Specifications for Design of Highway Reinforced Concrete and Prestressed Concrete Bridges and Culverts

Professional Standard - Electron

SJ 30030.10-2018 Aerospace-grade and highly reliable electrical connector process control requirements Part 10: Component termination

未注明发布机构

German Institute for Standardization

DIN EN 61167:2019 Metal halide lamps - Performance specification (IEC 61167:2018, modified + A1:2018); German version EN 61167:2018 + A1:2018
DIN EN ISO 4957:2018 Tool steels (ISO 4957:2018); German version EN ISO 4957:2018
DIN EN 61167:2019-12 Metal halide lamps - Performance specification (IEC 61167:2018, modified + A1:2018); German version EN 61167:2018 + A1:2018 / Note: DIN EN 61167 (2017-04) remains valid alongside this standard until 2021-11-27.
DIN EN IEC 62881:2019-06 Cause and Effect Matrix (IEC 62881:2018); German version EN IEC 62881:2018
DIN EN ISO 20569:2018 Dentistry - Trephine burs (ISO 20569:2018); German version EN ISO 20569:2018
DIN LN 9378:2018
DIN EN ISO 13769:2018 Gas cylinders - Stamp marking (ISO 13769:2018); German version EN ISO 13769:2018
DIN 14097-1:2018-05
DIN EN IEC 60238:2022-03 Edison screw lampholders (IEC 60238:2016 + A1:2017 + A1:2017/COR1:2018 + A2:2020); German version EN IEC 60238:2018 + A1:2018 + A2:2021
DIN 54113-1:2018-01
DIN 28131:2018-11
DIN EN ISO 7492:2018 Dentistry - Dental explorer (ISO 7492:2018); German version EN ISO 7492:2018
DIN EN ISO 6872:2019 Dentistry - Ceramic materials (ISO 6872:2015 + Amd.1:2018) (includes Amendment :2018)
DIN EN ISO 10650:2018 Dentistry - Powered polymerization activators (ISO 10650:2018); German version EN ISO 10650:2018
DIN EN ISO 4506:2018 Hardmetals - Compression test (ISO 4506:2018); German version EN ISO 4506:2018
DIN EN ISO 20696:2019-04 Sterile urethral catheters for single use (ISO 20696:2018, Corrected version 2018-09)
DIN EN ISO 14607:2018 Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018, Corrected version 2018-08); German version EN ISO 14607:2018
DIN EN IEC 61757:2020 Fibre optic sensors - Generic specification (IEC 61757:2018); German version EN IEC 61757:2018
DIN EN IEC 61757:2020-12 Fiber optic sensors - Generic specification (IEC 61757:2018); German version EN IEC 61757:2018
DIN EN ISO 7488:2018 Dentistry - Mixing machines for dental amalgam (ISO 7488:2018); German version EN ISO 7488:2018
DIN EN ISO 20696:2018 Sterile urethral catheters for single use (ISO 20696:2018); German version EN ISO 20696:2018
DIN EN ISO 19146:2018 Geographic information - Cross-domain vocabularies (ISO 19146:2018); English version EN ISO 19146:2018
DIN EN IEC 60230:2018 Impulse tests on cables and their accessories (IEC 60230:2018); German version EN IEC 60230:2018
DIN EN 1451-1:2018-10
DIN EN IEC 62731:2018 Text-to-speech for television - General requirements (IEC 62731:2018); German version EN IEC 62731:2018
DIN EN ISO 11961:2019 Petroleum and natural gas industry – steel drill pipes (ISO 11961:2018); English version EN ISO 11961:2018, only on CD-ROM
DIN EN ISO 20570:2018 Dentistry - Oral surgical scalpel handle (ISO 20570:2018); German version EN ISO 20570:2018
DIN 4108-3:2018-10
DIN SPEC 91372-2:2018-12 DIN SPEC 91372-2:2018
DIN EN ISO 20753:2019 Plastics - Test specimens (ISO 20753:2018)
DIN EN ISO 28158:2018 Dentistry - Integrated dental floss and handles (ISO 28158:2018); German version EN ISO 28158:2018
DIN EN ISO 4042:2018 Fasteners - Electroplated coating systems (ISO 4042:2018); German version EN ISO 4042:2018
DIN EN IEC 62881:2019 Cause and Effect Matrix (IEC 62881:2018); German version EN IEC 62881:2018
DIN EN IEC 62561-6:2018 Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) (IEC 62561-6:2018); German version EN IEC 62561-6:2018 + AC:2018
DIN EN IEC 60810/A1 E:2019 Draft Document - Lamps, light sources and LED packages for road vehicles - Performance requirements (IEC 34A/2106/CDV:2018); German and English version EN IEC 60810:2018/prA1:2018
DIN EN ISO 4885:2018 Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2018); German version EN ISO 4885:2018
DIN EN ISO 10683:2018 Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018); German version EN ISO 10683:2018
DIN EN 12681-2:2018-02
DIN EN ISO 10477:2018 Dentistry - Polymer-based crown and veneering materials (ISO 10477:2018); German version EN ISO 10477:2018
DIN EN ISO 11197 E:2018-07 Draft Document - Medical supply units (ISO/DIS 11197:2018); German and English version prEN ISO 11197:2018
DIN EN IEC 62881:2019-06*VDE 0810-881:2019-06 Cause and Effect Matrix (IEC 62881:2018);
DIN EN ISO 18618:2018 Dentistry - Interoperability of CAD/CAM systems (ISO 18618:2018); German version EN ISO 18618:2018
DIN EN IEC 60071-2:2021 Insulation co-ordination - Part 2: Application guidelines (IEC 60071-2:2018); German version EN IEC 60071-2:2018
DIN EN ISO 13918/A1 E:2018-12 Draft Document - Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/DAM 1:2018); German and English version EN ISO 13918:2018/prA1:2018
DIN EN ISO 21012:2019 Cryogenic vessels - Hoses (ISO 21012:2018)
DIN EN IEC 62933-1:2019 Electrical Energy Storage (EES) systems - Part 1: Vocabulary (IEC 62933-1:2018); German version EN IEC 62933-1:2018
DIN EN ISO 18750:2018 Intelligent transport systems - Co-operative ITS - Local dynamic map (ISO 18750:2018); English version EN ISO 18750:2018
DIN EN IEC 60230:2023-10 Impulse tests on cables and their accessories (IEC 60230:2018 + AMD1:2021); German version EN IEC 60230:2018 + A1:2023
DIN EN ISO 6270-2:2018-04
DIN EN 60205 Berichtigung 1:2018 Calculation of the effective parameters of magnetic piece parts (IEC 60205:2016/COR1:2018); German version EN 60205:2017/AC:2018-09
DIN EN ISO 9443:2018 Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018); German version EN ISO 9443:2018
DIN EN ISO 7492:2018-05 Dentistry - Dental explorer (ISO 7492:2018)
DIN EN IEC 60810/A1 E:2019-12 Draft Document - Lamps, light sources and LED packages for road vehicles - Performance requirements (IEC 34A/2106/CDV:2018); German and English version EN IEC 60810:2018/prA1:2018
DIN EN ISO 18593:2018 Microbiology of the food chain - Horizontal methods for surface sampling (ISO 18593:2018); German version EN ISO 18593:2018
DIN EN ISO 20697:2019 Sterile drainage catheters and accessory devices for single use (ISO 20697:2018, Corrected version 2018-09)
DIN EN ISO 8385:2018 Ships and marine technology - Dredgers - Classification (ISO 8385:2018); German version EN ISO 8385:2018
DIN EN ISO 8384:2018 Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2018); German version EN ISO 8384:2018
DIN EN ISO 21533:2018 Dentistry - Reprocessable cartridge syringes for intraligamentary injections (ISO 21533:2018); German version EN ISO 21533:2018
DIN EN IEC 62933-1:2019-08 Electrical Energy Storage (EES) systems - Part 1: Vocabulary (IEC 62933-1:2018); German version EN IEC 62933-1:2018
DIN EN IEC 60730-2-13:2018-09 Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls (IEC 60730-2-13:2017 + COR1:2018); German version EN IEC 60730-2-13:2018 + AC:2018
DIN ISO 31000:2018 Risk management - Guidelines (ISO 31000:2018)
DIN EN IEC 62271-110:2018 High-voltage switchgear and controlgear - Part 110: Inductive load switching (IEC 62271-110:2017 + COR1:2017 + COR2:2018); German version EN IEC 62271-110:2018 + AC:2018
DIN EN ISO 14918:2018 Thermal spraying - Qualification testing of thermal sprayers (ISO 14918:2018); German version EN ISO 14918:2018
DIN EN IEC 60071-2:2021-07 Insulation coordination - Part 2: Application guidelines (IEC 60071-2:2018); German version EN IEC 60071-2:2018
DIN EN ISO 17419:2018 Intelligent transport systems - Cooperative systems - Globally unique identification (ISO 17419:2018); English version EN ISO 17419:2018
DIN EN IEC 60268-4:2019 Sound system equipment - Part 4: Microphones (IEC 60268-4:2018); German version EN IEC 60268-4:2018
DIN EN IEC 60375:2022-07 Conventions concerning electric circuits (IEC 60375:2018); German version EN IEC 60375:2018
DIN EN 14516:2019 Baths for domestic purposes (includes Amendment :2018)
DIN EN IEC 60068-3-6:2018-10 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (IEC 60068-3-6:2018); German version EN IEC 60068-3-6:2018 + AC:2018
DIN EN IEC 60099-5:2019-02 Surge arresters - Part 5: Selection and application recommendations (IEC 60099-5:2018); German version EN IEC 60099-5:2018
DIN EN ISO 8067:2018 Flexible cellular polymeric materials - Determination of tear strength (ISO 8067:2018); German version EN ISO 8067:2018
DIN ISO 31000:2011 Risk management - Guidelines (ISO 31000:2018)
DIN EN 50321-1:2019-01 Live working - Footwear for electrical protection - Part 1: Insulating footwear and overboots; German version EN 50321-1:2018 + AC:2018

European Telecommunications Standards Institute (ETSI)

ETSI EN 300 220-2 V3.2.1 (2018-06)-2018

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0616-1-2019 Lampenfassungen mit Edisongewinde (IEC 60238:2016 + A1:2017 + A1:2017/COR1:2018); Deutsche Fassung EN IEC 60238:2018 + A1:2018
VDE 0810-881-2019 Ursache-Wirkungstabelle (IEC 62881:2018); Deutsche Fassung EN IEC 62881:2018
VDE 0185-561-6-2018 Blitzschutzsystembauteile (LPSC) - Teil 6: Anforderungen an Blitzzaehler (LSC) (IEC 62561-6:2018); Deutsche Fassung EN IEC 62561-6:2018 + AC:2018
VDE 0115-420 BERICHTIGUNG 1-2018 Railway applications - Traction transformers and inductors on board rolling Stock (IEC 60310:2016/COR1:2018); German version EN 60310:2016/AC:2018-03
VDE 0520-933-1-2019 Elektrische Energiespeichersysteme (EES-Systeme) - Teil 1: Terminologie (IEC 62933-1:2018); Deutsche Fassung EN IEC 62933-1:2018
VDE 0820-8-2019 Geraeteschutzsicherungen - Teil 8: Sicherungswiderstaende fuer Teilbereichsschutz (IEC 60127-8:2018); Deutsche Fassung EN IEC 60127-8:2018
VDE 0127-11-2019 Windenergieanlagen - Teil 11: Schallmessverfahren (IEC 61400-11:2012 + A1:2018); Deutsche Fassung EN 61400-11:2013 + A1:2018
VDE 0113-211-2019 Sicherheit von Maschinen - Anwendung von Schutzeinrichtungen zur Anwesenheitserkennung von Personen (IEC 62046:2018); Deutsche Fassung EN IEC 62046:2018
VDE 0126-30-2-2018 Photovoltaik(PV)-Module - Sicherheitsqualifikation - Teil 2: Anforderungen an die Pruefung (IEC 61730-2:2016); Deutsche Fassung EN IEC 61730-2:2018 + AC:2018
VDE 0170-9 BERICHTIGUNG 1-2018 "Explosionsgefaehrdete Bereiche - Teil 18: Geraeteschutz durch Vergusskapselung ""m"" (IEC 60079-18:2014/COR1:2018); Deutsche Fassung EN 60079-18:2015/AC:2018-09"
VDE 0185-561-7-2018 Blitzschutzsystembauteile (LPSC) - Teil 7: Anforderungen an Mittel zur Verbesserung der Erdung (IEC 62561-7:2018); Deutsche Fassung EN IEC 62561-7:2018
VDE 0122-576-2018 Elektrische Doppelschichtkondensatoren fuer die Verwendung in Hybridelektrofahrzeugen - Pruefverfahren fuer die elektrischen Kennwerte (IEC 62576:2018); Deutsche Fassung EN IEC 62576:2018
VDE 0674-500 BERICHTIGUNG 1-2018 Isolierte Durchfuehrungen fuer Wechselspannungen ueber 1 000 V (IEC 60137:2017/COR1:2018); Deutsche Fassung EN 60137:2017/AC:2018-08
VDE 0832-100-2019 Strassenverkehrs-Signalanlagen; Deutsche Fassung EN 50556:2018
VDE 0126-30-1-2018 Photovoltaik(PV)-Module - Sicherheitsqualifikation - Teil 1: Anforderungen an den Aufbau (IEC 61730-1:2016); Deutsche Fassung EN IEC 61730-1:2018 + AC:2018
VDE 0884-135-4-2019 Elektronische Bauteile - Langzeitlagerung elektronischer Halbleiterbauelemente - Teil 4: Lagerung (IEC 62435-4:2018); Deutsche Fassung EN IEC 62435-4:2018
VDE 0130-5-100-2019 Brennstoffzellentechnologien - Teil 5-100: Portable Brennstoffzellen-Energiesysteme - Sicherheit (IEC 62282-5-100:2018); Deutsche Fassung EN IEC 62282-5-100:2018
VDE 0390-23-2019 Supraleitfaehigkeit - Teil 23: Messung des Restwiderstandsverhaeltnisses - Restwiderstandsverhaeltnis von Nb-Supraleitern (IEC 61788-23:2018); Deutsche Fassung EN IEC 61788-23:2018
VDE 0884-135-6-2019 Elektronische Bauteile - Langzeitlagerung elektronischer Halbleiterbauelemente - Teil 6: Bauelemente in Gehaeusen oder fertiggestellte Bauelemente (IEC 62435-6:2018); Deutsche Fassung EN IEC 62435-6:2018
VDE 0830-91-3-2-2019 Gebaeude-Sprechanlagen - Teil 3-2: Gebaeude-Sprechanlagen fuer erhoehte Sicherheitsanforderungen - Anwendungsrichtlinien (IEC 62820-3-2:2018); Deutsche Fassung EN IEC 62820-3-2:2018
VDE 0712-0-207-2019 Digital adressierbare Schnittstelle fuer die Beleuchtung - Teil 207: Besondere Anforderungen an Betriebsgeraete - LED-Module (Geraetetyp 6) (IEC 62386-207:2018); Deutsche Fassung EN IEC 62386-207:2018
VDE 0712-0-221-2019 Digital adressierbare Schnittstelle fuer die Beleuchtung - Teil 221: Besondere Anforderungen fuer Betriebsgeraete - Leistungsanpassung (Geraetetyp 20) (IEC 62386-221:2018); Deutsche Fassung EN IEC 62386-221:2018
VDE 0712-0-333-2019 Digital adressierbare Schnittstelle fuer die Beleuchtung - Teil 333: Besondere Anforderungen fuer Eingabegeraete - Manuelle Konfiguration (Geraetetyp 33) (IEC 62386-333:2018); Deutsche Fassung EN IEC 62386-333:2018
VDE 0468-2-74-2019 Umgebungseinfluesse - Teil 2-74: Pruefverfahren - Pruefung Xc: Verunreinigung durch Fluessigkeiten (IEC 60068-2-74:1999 + A1:2018); Deutsche Fassung EN 60068-2-74:1999 + A1:2018
VDE 0750-211-2018 Medical supply units (ISO/DIS 11197:2018); German and English version prEN ISO 11197:2018
VDE 0300-6-1-2019 Elektrostatik - Teil 6-1: Ueberwachung der Elektrostatik im Gesundheitswesen - Allgemeine Anforderungen fuer die Infrastruktur (IEC 61340-6-1:2018); Deutsche Fassung EN IEC 61340-6-1:2018
VDE 0712-0-216-2018 Digital adressierbare Schnittstelle fuer die Beleuchtung - Teil 216: Anforderungen fuer Betriebsgeraete - Last-Referenzierung (Geraetetyp 15) (IEC 62386-216:2018); Deutsche Fassung EN IEC 62386-216:2018
VDE 0170-5 BERICHTIGUNG 1-2019 "Explosionsgefaehrdete Bereiche - Teil 1: Geraeteschutz durch druckfeste Kapselung ""d"" (IEC 60079-1:2014/COR1:2018); Deutsche Fassung EN 60079-1:2014/AC:2018-09"
VDE 0800-500-12-2019 Industrielle Kommunikationsnetze - Profile - Teil 5-12: Feldbusinstallation - Installationsprofile fuer die Kommunikationsprofilfamilie 12 (IEC 61784-5-12:2018); Deutsche Fassung EN IEC 61784-5-12:2018
VDE 0712-0-218-2018 Digital adressierbare Schnittstelle fuer die Beleuchtung - Teil 218: Besondere Anforderungen fuer Betriebsgeraete - Dimmkurven-Auswahl (Geraetetyp 17) (IEC 62386-218:2018); Deutsche Fassung EN IEC 62386-218:2018

Aerospace Industries Association/ANSI Aerospace Standards

Aeronautical Radio Inc.

ARINC 792-2018

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD47K-2018

Korean Agency for Technology and Standards (KATS)

Australian/New Zealand Standard (AU-AS/NZS)

Society of Automotive Engineers (SAE)

SAE AS9138-2018
SAE AS INDEX-2018 Aerospace Standards Index - 2018
SAE CPGM1_18LFYTRBU-2017 J1349 Certified Power Engine Data for GM LFY as used in 2018 Chevy Traverse and 2018 Buick Enclave - Level 1
SAE AMS4140E-1978 ALUMINUM ALLOY FORGINGS 4.0Cu - 2.0Ni - 0.68Mg (2018-T61)
SAE CPGM2_18LFYTRBU-2017 J1349 Certified Power Engine Data for GM LFY as used in 2018 Chevy Traverse and 2018 Buick Enclave - Level 2

British Standards Institution (BSI)

BS IEC 63195:2018
BS BIP 2223:2018 On-site guide for BS 7671:2018
BS BIP 2223:2022 On-Site Guide (BS 7671:2018+A2:2022)

American National Standards Institute （ANSI)

National Association of Corrosion Engineers (NACE)

NACE Paper 11084-2018
NACE TM21420-2018 NACE International Test Method TM21420-2018

International Organization for Standardization (ISO)

Indonesia Standards

SNI ISO/IEC 30141:2018 Internet for All – Architectural Reference (ISO/IEC 30141:2018 and ISO/IEC 30141:2018/Cor 1:2018, IDT, Eng)

Institute of Electrical and Electronics Engineers (IEEE)

IEEE/ISO/IEC 29148-2018
NFPA (Fire) 1964 Standard for Spray Nozzles, 2018 Edition
NFPA (Fire) 1HB18 Fire Code Handbook, 2018 Edition
NFPA (Fire) 495 Explosive Materials Code, 2018 Edition
NFPA (Fire) 22 Water Tanks for Private Fire Protection, 2018 Edition
NFPA (Fire) 1925 Standard on Marine Fire-Fighting Vessels, 2018 Edition

Swedish Institute for Standards

SS-EN ISO 4957:2018 Tool steels (ISO 4957:2018)
SS-EN ISO 20569:2018 Dentistry - Trephine burs (ISO 20569:2018)
SS-ISO 2238:2018 Machine bridge reamers (ISO 2238:2018, IDT)
SS-EN ISO 15112:2018 Natural gas - Energy determination (ISO 15112:2018)

Canadian Standards Association (CSA)

CAN/CSA-ISO/IEC 20924-2019 Internet of things (IoT) - Vocabulary (Adopted ISO/IEC 20924:2018, first edition, 2018-12)
CAN/CSA-ISO/IEC 23270-2019 Information technology - Programming languages - C# (Adopted ISO/IEC 23270:2018, third edition, 2018-12)
CAN/CSA-ISO/IEC 9899:19-2000 Information technology - Programming languages - C (Adopted ISO/IEC 9899:2018, fourth edition, 2018-07)
CAN/CSA-ISO 10005-2020 Quality management - Guidelines for quality plans (Adopted ISO 10005:2018, third edition, 2018-06)
CAN/CSA-ISO/IEC 30141-2019 Internet of Things (IoT) - Reference architecture (Adopted ISO/IEC 30141:2018, first edition, 2018-08)
CAN/CSA-ISO/IEC TR 29196-2020 Information technology - Guidance for biometric enrolment (Adopted ISO/IEC TR 29196:2018, first edition, 2018-05)
CAN/CSA-ISO/IEC TS 29003-2019 Information technology - Security techniques - Identity proofing (Adopted ISO/IEC TS 29003:2018, first edition, 2018-03)
CAN/CSA-ISO/IEC 7811-1-2019 Identification cards - Recording technique - Part 1: Embossing (Adopted ISO/IEC 7811-1:2018, fifth edition, 2018-08)
CAN/CSA-ISO/IEC 24787-2020 Information technology - Identification cards - On-card biometric comparison (Adopted ISO/IEC 24787:2018, second edition, 2018-10)
CAN/CSA-ISO/IEC 20027-2020 Information technology- Guidelines for slap tenprint fingerprintture (Adopted ISO/IEC 20027:2018, first edition, 2018-07)
CAN/CSA-ISO 10002-2020 Quality management - Customer satisfaction - Guidelines for complaints handling in organizations (Adopted ISO 10002:2018, third edition, 2018-07)

Spanish Association for Standardization (UNE)

AENOR UNE-EN ISO 4957:2019 Tool steels (ISO 4957:2018)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE REFRIGERATION IP HANDBOOK-2018 2018 ASHRAE Handbook Refrigeration
ASHRAE REFRIGERATION SI HANDBOOK-2018 2018 ASHRAE Handbook Refrigeration

Standards Norway

NS-EN ISO 4957:2018 Tool steels (ISO 4957:2018)
NS-EN ISO 21012:2018 Cryogenic vessels - Hoses (ISO 21012:2018)
NS-EN ISO 20569:2018 Dentistry - Trephine burs (ISO 20569:2018)
NS-EN ISO 13769:2018 Gas cylinders — Stamp marking (ISO 13769:2018)
NS-EN ISO 20753:2018 Plastics - Test specimens (ISO 20753:2018)
NS-EN ISO 7405:2018 Dentistry - Evaluation of biocompatibility of medical devices used in dentistry (ISO 7405:2018, Corrected version 2018-12)
NS-EN ISO 14607:2018 Non-active surgical implants — Mammary implants — Particular requirements (ISO 14607:2018, Corrected version 2018-08)
NS-EN ISO 20697:2018 Sterile drainage catheters and accessory devices for single use (ISO 20697:2018, Corrected version 2018-09)
NS-EN ISO 7492:2018 Dentistry - Dental explorer (ISO 7492:2018)

International Telecommunication Union (ITU)

ITU-T K.50 Erratum 1-2021 Erratum 1 (03/2021) to Recommendation ITU-T K.50 (2018), ITU-T K.50 (2018) Amendment 1(2020) and ITU-T K.50 (2018) Corrigendum 1(2020)

Association of German Mechanical Engineers

VDI 4202 Blatt 1 (2018-04-00)

CN-STDBOOK

图书 3-9102 Global Energy Interconnection Standard System Research 2018 (Global Energy Interconnection Standard System Research 2018)
图书 3-9254 Research and Reflection 2018 (2)
图书 A-4652 China Certification and Accreditation Yearbook 2018
图书 3-8970 Compilation of Power Quality Standards 2018
图书 3-9144 National Compulsory Standard Catalog 2018