portrait

portrait, Total:120 items.

The international standard classification for "portrait" includes: Reproduction equipment , Woodworking equipment in general , Footwear , Road vehicle tyres , Livestock buildings, installations and equipment , Components for conveyors , Plastics pipes , Paper and board , Other iron and steel products , Flat steel products and semi-products , Other standards related to shipbuilding and marine structures , Deck equipment and installations , Iron and steel forgings .

The Chinese standard classification for "portrait" includes: Tools , Special equipment for aircraft manufacturing , Clamping fixtures , Printing machinery , Saw timber, artificial board machinery and tools , Footgear , Tyre , Animal husbandry in general , Rubber tube, rubber belt and tape , Plastic profile , Paper , Metallographic testing method , Clothing, footgear and headwear in general , Steel sheet and strip , Shipping industry engineering , Overall vessels in general , Forging and pressing , Technical management , Profile steel and deformed steel , Railway passenger coaches .

Professional Standard - Aviation

HB 3788-1986 Thin Plate Longitudinal Holder-on
HB 3308-1991 Longitudinal high precision appliance (for scribing and drilling table)
HB 3309-1991 Longitudinal low precision appliance (for scribing and drilling table)
HB 3299-1991 Longitudinal high precision tool (for frame assembly machine)
HB 1822-1978 Vertical retractable wheel
HB 548-1989 Single-hole Fork with Longitudinal Holding Piece
HB 6-38-1976 Ground wire with two longitudinal connectors
HB 6828.8-1993 Typical Combination of Cold-punching Mould - Typical Combination of Guide Board Type and Longitudinal Feeding
HB 548-1974 Single hole fork with longitudinal compression
HB 1822-2000 Longitudinal release wheel
HB 1963-1975 Typical combination of rectangular longitudinal closed punching die with rear guide post
HB 3309-1980 Longitudinal low precision tool (for scribing drilling table)
HB 3308-1980 Longitudinal high-precision tool (for scribing drilling table)
HB 6-38-1983 Ground wire/longitudinal connector with two longitudinal connectors
HB 3786-1986 Long Handle Longitudinal Holder-on

Professional Standard - Machinery

JB/T 6422-1992 longitudinal slitter
JB/T 12568-2015 Optimization mufti-blade rip saw
JB/T 10937-2010 Belt conveyor-detector of transportation portrait avulsion
JB/T 6422-2006 Printing machinery-Slitting machine

Group Standards of the People's Republic of China

T/GDEIA 10-2019 Thin film longitudinal CNC slitter

Military Standard of the People's Republic of China-General Armament Department

GJB 1897A-2007 Specification for longitudinal watertight buried cable
GJB 1897-1994 Specification for longitudinally sealed direct buried cables

国家林业局

LY/T 1470-2016 Longitudinal slicer

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14999.3-2012 Test methods for superalloys - Part 3: Verification of longitudinal fracture of bars
GB/T 3903.34-2008 Footwear—Test methods for shanks—Longitudinal stiffness
GB/T 26623-2011 Design requirements of tunnel ventilation system for animal housing
GB/T 452.1-2002 Paper and board identification of machine and cross direction
GB/T 5754-1986 Steel cord conveyor belts--Longitudinal traction test--Measurement of tensile strength
GB/T 6671-2001 Thermoplastics pipes - Determination of longitudinal reversion
GB/T 23663-2009 Test method of automobile tyre longitudinal and lateral stiffness
GB/T 14999.1-1994 Methods of acid etch test for longitudinal macro - Structures of heat - Resisting superalloy bars
GB/T 14999.3-1994 Methods of longitudinal fracture test for heat - Resisting superalloy bars

Professional Standard - Light Industry

QB/T 1813-2000 Test Methods for Longitudinal Rigidity of Leather Shoes Shanks

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 23663-2020 Test method for longitudinal and lateral stiffness of motor vehicle tyres
GB/T 37800-2019 Hot rolled longitudinally profiled steel plate

Professional Standard-Ships

CB/T 8502-2005 Code of design for longitudinal inclined building berth and slipway
CB/T 4153-2011 The launching strength calculations for undecked ship
CB/Z 51-1981 Longitudinal planing launching technology of ship
CB*/Z 51-1981 Longitudinal planing launching technology of ship
CB 1190-1988 Longitudinal Vibration Piezoelectric Transducer Parameter Series

国家铁路局

TB/T 3511-2018 Test method of longitudinal dynamics for freight train

Professional Standard - Aerospace

QJ 747-1982 Typical combination of longitudinal guide plate punching die

Professional Standard - Forestry

LY/T 1456-1999 Longitudinal sewing machine accuracy
LY/T 1471-1999 Lengthways Veneer Slicer - Accuracy Tests
LY/T 1470-1999 Longitudinal Veneer Slicer - Parameter
LY/T 1455-1999 Longitudinal sewing machine parameters

Professional Standard - Ferrous Metallurgy

YB 4093-1993 Iongitudinal macro-structures standard for superalloy GH4133B disk forgings

Shaanxi Provincial Standard of the People's Republic of China

DB61/T 1425-2021 Technical regulations for the construction of longitudinal drainage blind pipes in highway tunnels

未注明发布机构

NR TEF 3014 ISSUE 7-2023 Detailed Examination of Longitudinal Bearer System
NR TEF 3279 ISSUE 2-2023 Longitudinal Bearer Management Plan

Professional Standard - Electron

SJ 3089-1988 Cold press dies - Typical structure of longitudinal feeding with spring stripper
SJ 3087-1988 Cold press dies - Typical structure of longitudinal feeding with fixed stripper
SJ 3110-1988 Cold press dies - Backing plate for longitudinal feeding of Ⅰ-type fixed guide plate
SJ 3096-1988 Cold press dies-Typical assembly for longitudinal feeding of Ⅰ-type fixed guide plate
SJ 3111-1988 Cold press dies - Retaining plate for longitudinal feeding of Ⅰ-type fixed guide plate

Professional Standard - Railway

TB/T 2706.4-1996 Cold Formed Steel Sections of Passenger Train Series 4 - Longitudinal Beam of Sidewall
TB/T 2370-1993 Test Method and Assessment Indexes for Longitudinal Dynamics of Railway Passenger Train

Professional Standard - Military and Civilian Products

WJ 777-1997 Cold Die Component Template (Portrait)

AASHTO - American Association of State Highway and Transportation Officials

DIVISION I 3.9-1996 Longitudinal Forces

ICEA - Insulated Cable Engineers Association Inc.

T-34-664-1996-1996 Guide for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables
T-34-664-2007-2007 TEST METHOD FOR CONDUCTING LONGITUDINAL WATER PENETRATION RESISTANCE TESTS ON LONGITUDINAL WATER BLOCKED CABLES
T-34-664-2014-2014 TEST METHOD FOR CONDUCTING LONGITUDINAL WATER PENETRATION RESISTANCE TESTS ON LONGITUDINAL WATER BLOCKED CABLES
T-34-664-2018 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables

GM Europe

GME R-10B-18-2001 Aquaplaning, Longitudinal Direction (English/German; Includes Appendix A)

Insulated Cable Engineers Association （ICEA)

ICEA T-34-664-1996 Guide for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables
ICEA T-34-664-2014 TEST METHOD FOR CONDUCTING LONGITUDINAL WATER PENETRATION RESISTANCE TESTS ON LONGITUDINAL WATER BLOCKED CABLES

AIA/NAS - Aerospace Industries Association of America Inc.

NAS935-1963 Fusion Welding Machine@ Longitudinal
NAS933-1963 Fusion Welding Machine@ Circumferential - Longitudinal
NASM20700-1999 Pin@ Grooved@ Headless@ Longitudinal Groove
NASM35671-1999 Pin@ Grooved@ Headless-Longitudinal Taper Groove@ Carbon Steel
NASM35677-1999 Pin@ Grooved@ Headless-Longitudinal Center Groove@ Carbon Steel

Korean Agency for Technology and Standards (KATS)

KS W 1638-2020 Longitudinal groove headless pin
KS T 1324-2017 Test for machine direction of paper

ES-AENOR

INTA 14 05 52 Longitudinal compression (wood)
INTA 14 05 54 Longitudinal traction (timber)

AR-IRAM

IRAM 5054-1958 Slide tab vertically

HU-MSZT

MSZ 1410-1976 Longitudinal and transverse cutting machines
MSZ 3852-1979 MSZ 3852-79 Longitudinal turning
MSZ 185-1982 Longitudinal welded steel pipe. size
MSZ 186/1-1982 Commercial Grade Longitudinal Welded Steel Pipe
MSZ 6768/5-1970 Steel plate longitudinal extension basic material
MSZ 382/1-1983 Calibrated, longitudinal, welded steel pipe dimensions

Spanish Association for Standardization (UNE)

UNE 57043:1974 PAPER. DETERMINATION OF LONGITUDINAL DIRECTION

CZ-CSN

CSN 72 2612-1966 Burnt longitudinal perforated bricks
CSN 69 8884-1973 Longitudinal level indicators - welded-on
CSN 72 2632-1980 Lime sand elements for vertical structures
CSN 72 2628-1987 Brick products for vertical structures. Perforated bricks
CSN 72 2611 Cast.2-1989 Brick elements for vertical structures. Perforated brick

American National Standards Institute （ANSI)

ANSI/ICEA T-34-664-2014 TEST METHOD FOR CONDUCTING LONGITUDINAL WATER PENETRATION RESISTANCE TESTS ON LONGITUDINAL WATER BLOCKED CABLES
ANSI/ICEA T-34-664-2007 Test Method for Conducting Longitudinal Water Penetration Resistance Tests on Longitudinal Water Blocked Cables

British Standards Institution (BSI)

BS ISO 11772:2024 Hot-rolled longitudinally profiled steel plate

Society of Automotive Engineers (SAE)

SAE AS8016A-1996 Vertical Velocity Instrument (Rate-of- Climb)
SAE J2718-2006 Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Force vs. Lateral Displacement
SAE J2718-2010 Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Froce vs. Lateral Displacement

Aerospace Industries Association

AIA NASM20700-1999 Pin, Grooved, Headless, Longitudinal Groove FSC 5315

PL-PKN

PN P04958-1990 Hosiery Pontie-hose Determination of longitudinal extensibility
PN W89193-1964 Ship's rigging equipment Longifudinal eyes

AGMA - American Gear Manufacturers Association

11FTM18-2011 Longitudinal Tooth Contact Pattern Shift

American Gear Manufacturers Association

AGMA 11FTM18-2011 Longitudinal Tooth Contact Pattern Shift

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NASM20700-2012 PIN, GROOVED, HEADLESS, LONGITUDINAL GROOVE (Rev 1)
AIA/NAS NASM35674-2012 PIN, GROOVED, HEADLESS, LONGITUDINAL STRAIGHT GROOVE, CARBON STEEL
AIA/NAS NASM35671-2011 PIN, GROOVED, HEADLESS, LONGITUDINAL TAPER GROOVE, CARBON STEEL
AIA/NAS NASM20700-1999 Pin, Grooved, Headless, Longitudinal Groove

NL-NEN

NEN 1761-1993 Paper and board. Determination of machine direction and cross direction

RO-ASRO

STAS 430-1974 T.ONGTTUDINAL KEY AND KEY JOTNTS Shapes

SAE - SAE International

SAE J2718-2017 Test for Tire Quasi-Static Longitudinal Force versus Longitudinal Displacement and Quasi-Static Lateral Force versus Lateral Force
SAE J2718-2018 Test for Tire Quasi-Static Longitudinal Force vs. Longitudinal Displacement and Quasi-Static Lateral Force vs. Lateral Displacement

GSO

GSO ISO 8741:2013 Grooved pins -- Half-length reverse-taper grooved

Defense Logistics Agency

DLA DSCC-DWG-87008 REV C-2006 CLAMP, CAPACITOR, CYLINDRICAL, VERTICAL MOUNTING

International Telecommunication Union (ITU)

ITU-T G.696.1 RUSSIAN-2005 Longitudinally compatible intra-domain DWDM applications
ITU-T G.696.1 FRENCH-2005 Longitudinally compatible intra-domain DWDM applications Applications de multiplexage par r閜artition dense en longueur d'onde intradomaniales longitudinalement compatibles
ITU-T G.696.1 SPANISH-2005 Longitudinally compatible intra-domain DWDM applications Applications of multiplexing by dividing the density into the longitudinally compatible intradomain