Granularity d and d

Granularity d and d, Total:146 items.

The international standard classification for "Granularity d and d" includes: Animal feeding stuffs , Drills, countersinks, reamers , Mechanical testing , Measurement of force, weight and pressure , Pigments and extenders .

The Chinese standard classification for "Granularity d and d" includes: Livestock and poultry feed and additive , Cutters , Metal material testing machine , Mechanics Measurement , Dye intermediate .

未注明发布机构

FORD ESD-M97B49-A-2007 COOLANT, ENGINE, CONCENTRATE - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD SA-M4D9961-A-2007 POLYURETHANE ELASTOMER, SHORE HARDNESS D 60 - ***TO BE USED WITH FORD WSS-M99P1111***
FORD ESA-M4D182-A-2009 POLYURETHANE, CAST - 52 DUROMETER "D" HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D889-A1-2006 POLYVINYL CHLORIDE (PVC), RIGID, 65 D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M4D182-A-1979 POLYURETHANE, CAST - 52 DUROMETER"D" HARDNESS
FORD WSE-M97B44-D-2002 COOLANT, ORGANIC ADDITIVE TECHNOLOGY (OAT), CONCENTRATE, FOR PASSENGER CAR AND LIGHT TRUCK ***TO BE USED WITH FORD WSS-M99P1111-A*** [Superseded: FORD WSS-M97B44-D, FORD WSS-M97B44-D, FORD WSS-M97B44-D, FORD WSS-M97B44-D, FORD WSS-M97B44-D, FORD WSS-M97
FORD WSK-M4D755-A1-2006 THERMOPLASTIC POLYURETHANE ELASTOMER (TPU) 55 DUROMETER D HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***

Qinghai Provincial Standard of the People's Republic of China

DB63/T 1316-2014 Botulinum toxin type D granular poison bait

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9840-2006 Feed additive - Vitamin D3 beadlets

Professional Standard - Aerospace

QJ 429-1978 1:50 taper pin taper caliper (D=1~10)
QJ 427-1978 1:50 taper caliper (D=2.5~24)
QJ 384-1978 Straight shank 1:30 taper reamer (d=13~50)
QJ 406-1978 Taper Shank Combination Drill with Angle (Ψ =90° or 120°; D=16 ~ 22)
QJ 384-1989 Parallel Shank 1:30 Conical Reamer D=13~50
QJ 405-1978 Straight Shank Combination Drill with Angle (Ψ = 90° or 120°; D=5.3~12.9)

Professional Standard - Agriculture

2363药典二部-2010 Appendix Ⅹ D Release Test Method
1761药典一部-2010 Appendix VD Atomic Absorption Spectrophotometry
2299药典二部-2010 Appendix IV D Atomic Absorption Spectrophotometry

Professional Standard - Machinery

JB/T 8284-1999 Specifications for D-type shore hardness testers

Military Standard of the People's Republic of China-General Armament Department

GJB 8147-2013 Associated-particle method for determining accelerator-based D-T fusion neutron yield

National Metrological Verification Regulations of the People's Republic of China

JJG 1039-2008 Verification Regulation of Shore D Durometer

Professional Standard - Light Industry

QB/T 5937-2023 Antifreeze peptides powder

Professional Standard - Aviation

HB 858-1975 D type guide pin
HB 2331-1976 1:50 taper cone reamer D=0.3~0.95mm
HB 2332-1976 1:100 taper cone reamer D=0.3~0.95mm

Professional Standard - Railway

TB/T 2884.2-1998 D-type bearing saddle measuring tool saddle width sample
TB/T 2884.5-1998 D-type bearing saddle measuring tool symmetrical measuring tool

Professional Standard - Public Safety Standards

GA/T 63-1993 Police camera and lens D type connection thread

Professional Standard - Chemical Industry

HG/T 2668-2006 Azoic coupling component AS-D
HG/T 2668-1995 Naphthalene AS-D

Group Standards of the People's Republic of China

T/CBFIA 05003-2023 D-psicose
T/HBYY 0002-2018 D-Mannose

AT-ON

ONORM E 6746-1975 Gauges C 17 for checking of the concentricity in fuse-bases D II, D III, D O1, D 02, D 03
ONORM E 6703-1974 Fuse carriers D Ol, D 02, D 03, 380 V
ONORM E 6702-1988 DO-fuse bases for front connection D 01,D 02, D 03, 380 V
ONORM E 6701-1988 Fuse-gauge pieces; D Ol, D 02, D 03 and handkey for gauge piece

Gosstandart of Russia

GOST R 51240-1998 Fruit and vegetable juices. Determination of D-glucose and D-fructose content
GOST 14343-1969 Semiconductors diodes types of D 223, D 223a, D 223B for widely used devices
GOST R 51128-1998 Fruit and vegetable juices. Determination of D-isocitric acid

The American Road & Transportation Builders Association

AASHTO T 195-2011(2015) Standard Method of Test for Determining Degree of Particle Coating of Bituminous-Aggregate Mixtures (ASTM Designation: D 2489/D 2489M-08)

Defense Logistics Agency

DLA L-P-390 C NOTICE 2-2000 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) [Refer To: ASTM D4976, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, ASTM D4976 REV B, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, AS
DLA L-P-390 C (2)-1984 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) [Refer To: ASTM D4976, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, ASTM D4976 REV B, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, AS
DLA L-P-390 C-1971 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) [Refer To: ASTM D4976, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, ASTM D4976 REV B, ASTM D4976 REV A, ASTM D4976, ASTM D4976, ASTM D4976, AS
DLA A-A-59395-2000 DRILLING MACHINE, RADIAL, FLOOR-MOUNTED [Superseded: DLA MIL-D-80262 B CANC NOTICE 1, DLA MIL-D-80262 B (1), DLA MIL-D-80262 B, DLA MIL-D-80262 A (2), DLA MIL-D-80262 A, DLA MIL-D-80262 (2), DLA MIL-D-80262 (1), DLA MIL-D-80262]
DLA A-A-59376-1999 DRILLING MACHINE, RADIAL, BENCH-MOUNTED, SLIDING ARM AND SWIVEL-HEAD, HAND-FEED [Superseded: DLA MIL-D-45815 E CANC NOTICE 1, DLA MIL-D-45815 E, DLA MIL-D-45815 D VALID NOTICE 1, DLA MIL-D-45815 D, DLA MIL-D-45815 C (1), DLA MIL-D-45815 C, DLA MIL
DLA A-A-59411-2000 DIMPLING MACHINE, HOT AND COLD PROCESS, PORTABLE [Superseded: DLA MIL-D-4725 C CANC NOTICE 2, DLA MIL-D-4725 C VALID NOTICE 1, DLA MIL-D-4725 C (1), DLA MIL-D-4725 C, DLA MIL-D-4725 B, DLA MIL-D-4725 A, DLA MIL-D-4725 (2), DLA MIL-D-4725]
DLA A-A-59708-2001 CLOTH, COTTON, AFTERTREATED WATER-REPELLANT, WATER-REPELLANT, AND MILDEW RESISTANT, MILDEW RESISTANT [Superseded: DLA CCC-D-950 F CANC NOTICE 2, DLA CCC-D-950 F CANC NOTICE 1, DLA CCC-D-950 F INT AMD 1, DLA CCC-D-950 F, DLA CCC-D-950 E (1), DLA CCC
DLA A-A-59374 VALID NOTICE 1-2005 DECALS (HEAT TRANSFER): USMC [Superseded: DLA MIL-D-29362 B CANC NOTICE 1, DLA MIL-D-29362 B, DLA MIL-D-29362 A, DLA MIL-D-29362 (1), DLA MIL-D-29362]
DLA A-A-59374-2000 DECALS (HEAT TRANSFER): USMC [Superseded: DLA MIL-D-29362 B CANC NOTICE 1, DLA MIL-D-29362 B, DLA MIL-D-29362 A, DLA MIL-D-29362 (1), DLA MIL-D-29362]
DLA MIL-DTL-32373 D-2011 PLUG, MACHINE THREAD, MAGNETIC: DRAIN [Superseded: DLA MS35844 REV D CANC NOTICE 5, DLA MS35844 REV D VALID NOTICE 4, DLA MS35844 REV D NOTICE 3, DLA MS35844 REV D REINST NOTICE 2, DLA MS35844 REV D CANC NOTICE 1, DLA MS35844 REV D, DLA MS35844 REV C,

German Institute for Standardization

DIN 49525-2:1979-03 D-type, fuse-carriers D 01, D 02, D 03, 380 V; gauges
DIN 49522:1981 D-type fuse-links D 01, D 02, D 03, 380 V 250 V
DIN 6330:1965 Hexagon nuts with a height of 1,5 d
DIN 6331:1987 Hexagon collar nuts with a height of 1,5 d
DIN 6331:2003-04 Hexagon collar nuts with a height of 1,5 d
DIN 6330:2003-04 Hexagon nuts with a height of 1,5 d
DIN 6331:1965 Hexagon collar nuts with a height of 1,5 d
DIN 6331:1991 Hexagon collar nuts with a height of 1,5 d
DIN 6330:1991 Hexagon nuts with a height of 1,5 d
DIN 53505:2000-08 Shore A and Shore D hardness testing of rubber
DIN 49513:1986 D-type fuse-bases for rear connection D IV 100 A 500 V
DIN EN 12982:2000 Industrial valves D [ N Lengths for valves with welded ends
DIN 53505:2000 Testing of rubber - Shore A and Shore D hardness test

Spanish Association for Standardization (UNE)

UNE 27658:1978 TYPE "D" ANGLED HOOP.
AENOR UNE 18070:1970 Bearing bushings. From d = 2 to d = 250 mm.
AENOR UNE 166001:2006 R&D&i management: Requirements for R&D&i projects.
UNE 166001:2006 R&D&i management: Requirements for R&D&i projects.
UNE 166000:2006 R&D&i: Terminology and definitions of R&D&i activities.
UNE 166002:2021 R&D&i management: R&D&i management system requirements.
UNE 166002:2014 R&D&i management: R&D&i management system requirements.
UNE 166002:2006 R&D&i management: R&D&i management system requirements.

Magyar Szabványügyi Testület

MSZ 2402-1969 Screw length: 1.25 d
MSZ 2407-1969 Fine handle scale: 1.25 d
MSZ 2403-1969 Striped nut length: 1,26 d
MSZ 2444-1978 Accuracy of D-Head Industrial Alloys
MSZ 2408-1969 Finely machined striped nut length: 1,25 d

United States Navy

NAVY A-A-59366-1999 DOUGHNUT MACHINE, CUTTING AND FRYING (NAVAL SHIPBOARD) [Superseded: NAVY OO-D-582 D CANC NOTICE 1, NAVY OO-D-582 D (1), NAVY OO-D-582 D, NAVY OO-D-582 C (2), NAVY OO-D-582 C INT AMD 1, NAVY OO-D-582 C, NAVY OO-D-582 B (1), NAVY OO-D-582 B]
NAVY MS29520 REV H-1992 ENVELOPE DIMENSION NOZZLE, PRESSURE FUEL SERVICING LOCKING AIRCRAFT, TYPES D-1, D-1R, D-2& D-2R
NAVY MIL-PRF-24667 C-2008 COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION [Superseded: NAVY MIL-D-23003A CANC NOTICE 2, NAVY MIL-D-23003A NOTICE 1, NAVY MIL-D-23003A REINST NOTICE 2, NAVY MIL-D-23003A CANC NOTICE 1, NAVY MIL-D-23003A (1), NAVY MIL-D-23003
NAVY MIL-C-18164 A-1968 COMPOSITION D-2
NAVY MIL-C-18164 A VALID NOTICE 1-1986 COMPOSITION D-2
NAVY MIL-C-18164 A (1)-1969 COMPOSITION D-2

National Electrical Manufacturers Association（NEMA)

NEMA MW 1000-2016 Magnet Wire (Incorporated Corrections to Annex D Table D.1@ Table D.2@ and Table D.3)

American National Standards Institute （ANSI)

ANSI/NEMA MW 1000-2016 Magnet Wire (Incorporated Corrections to Annex D Table D.1@ Table D.2@ and Table D.3)

Society of Automotive Engineers (SAE)

SAE AIR857 Speed Variation of D-C Motors
SAE AIR857A Speed Variation of D-C Motors

WRC - Welding Research Council

BULLETIN 344-1989 THREE DIMENSIONAL FINITE ELEMENT ANALYSIS OF PVRC 45 DEGREE LATERAL MODEL 4 (D/D = 0.5@ D/T = 40) UNDER OUT-OF-PLANE MOMENT LOADING ON BRANCH PIPES

North Atlantic Treaty Organization Standards Agency

STANAG 1065-2009 REPLENISHMENT AT SEA - ATP-16(D)/MTP-16(D)

American Society for Testing and Materials (ASTM)

ASTM DS55S10-1974 INTERLABORATORY COOPERATIVE STUDY OF THE PRECISION AND ACCURACY OF THE DETERMINATION OF THE RELATIVE DENSITY OF BLACK SMOKE (RINGELMANN METHOD) USING ASTM METHOD D 3211-73T
ASTM D2148 adjunct ASTM D 2148

CZ-CSN

CSN 36 0382-1982 Bayonet lampholders 15 d and B 22 d
CSN ON 42 3442-1962 Non-ferrous metallurgy. Thermal bimetallic D (Bi D)
CSN 68 6869-1953 AD. Glycoside

U.S. Military Regulations and Norms

ARMY MIL-PRF-53015 A-1999 DISPLACEMENT AND EVACUATION KIT, COLLAPSIBLE HOSELINE [Superseded: ARMY MIL-D-52349 C CANC NOTICE 1, ARMY MIL-D-52349 C, ARMY MIL-D-52349 B (1), ARMY MIL-D-52349 B, ARMY MIL-D-52349 A, ARMY MIL-D-52349]
ARMY MIL-DTL-3943 E SUPP 1-1999 DECORATIONS AND MEDALS, GENERAL SPECIFICATION FOR [Superseded: ARMY MIL-M-3946 D CANC NOTICE 2, ARMY MIL-M-3946 D NOTICE 1, ARMY MIL-M-3946 D SUPP 1B, ARMY MIL-M-3946 D SUPP 1A, ARMY MIL-M-3946 D, ARMY MIL-M-3946 D SUPP 1, ARMY MIL-M-3946 C INT A
ARMY MIL-DTL-3943 E-1999 DECORATIONS AND MEDALS, GENERAL SPECIFICATION FOR [Superseded: ARMY MIL-M-3946 D CANC NOTICE 2, ARMY MIL-M-3946 D NOTICE 1, ARMY MIL-M-3946 D SUPP 1B, ARMY MIL-M-3946 D SUPP 1A, ARMY MIL-M-3946 D, ARMY MIL-M-3946 D SUPP 1, ARMY MIL-M-3946 C INT A
ARMY MIL-DTL-3943 E NOTICE 1-2001 DECORATIONS AND MEDALS, GENERAL SPECIFICATION FOR [Superseded: ARMY MIL-M-3946 D CANC NOTICE 2, ARMY MIL-M-3946 D NOTICE 1, ARMY MIL-M-3946 D SUPP 1B, ARMY MIL-M-3946 D SUPP 1A, ARMY MIL-M-3946 D, ARMY MIL-M-3946 D SUPP 1, ARMY MIL-M-3946 C INT A

YU-JUS

JUS M.B2.014-1978 ashers with outside diameterD * 3 d bolt diameter

NATO - North Atlantic Treaty Organization

STANAG 1065-2012 REPLENISHMENT AT SEA - ATP-16(D)/MTP-16(D) (ED 21)
STANAG 1065-2002 Replenishment at Sea - ATP-16(D)/MTP-16(D) (ED 15)
STANAG 1065-2010 REPLENISHMENT AT SEA - ATP-16(D)/MTP-16(D) (ED 20)
STANAG 1065-2005 Replenishment at Sea - ATP-16(D)/MTP-16(D) (ED 16)
STANAG 1065-2006 Replenishment at Sea - ATP-16(D)/MTP-16(D) (ED 17)
STANAG 1065-2008 REPLENISHMENT AT SEA - ATP-16(D)/MTP-16(D) (ED 18)

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.3.15-2004 Purity, Copper Foil or Plating Revision D

American Wood Protection Association

AWPA P29-11 Standard for Alkaline Copper Quat Type D (ACQ-D)
AWPA P29-14 Standard for Alkaline Copper Quat Type D (ACQ-D)
AWPA P29-20 Standard Alkaline Copper Quat Type D (ACQ-D)
AWPA P29-08 Standard for Alkaline Copper Quat Type D (ACQ-D)
AWPA P63-23 Standard for Micronized Copper Quat Type D (MCQ-D)

International Commission on Illumination (CIE)

CIE D001-2006 CIE Disk D 001 Rel 1.3: "CIE Photometric and Colorimetric Tables"

American Welding Society (AWS)

WRC 344:1989 Part 1: Three Dimensional Finite Element Analysis Of PVRC 45 Degree Lateral Model 4 (d/D = 0.5, D/T = 40) Under Out-Of-Plane Moment Loading On Branch Pipes; Part 2: Three Dimensional Finite Element Analysis Of 45 Degree Lateral Model 2 (d/D = 0.5, D/...

Korean Agency for Technology and Standards (KATS)

KS M 5007-2006 LAKE RED D
KS M 5007-1995 LaKe red D
KS J 1004-2023 D(+)-glucose
KS J 1004-1997(2023) D(+)-glucose
KS M 8376-2006(2011) D(＋)－Galactose
KS M 8297-2023 D(＋)Glucose
KS J 1004-1997(2018) Biochemical Reagent - D(+)-Glucose
KS M 8297-2012(2023) D(＋)Glucose
KS M 8297-2012(2018) D(＋)Glucose

Japanese Industrial Standards Committee (JISC)

JIS K 5208:1971 Lake red D
JIS D 4103:2015
JIS K 8250:1992 D(+)-galactose
JIS K 9809:1996 D(+)-Glucose
JIS K 8824:1992 D(+)-Glucose
JIS K 8882:1994 D(-)-Mannitol
JIS P 3104:1958 Printing paper D

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

RAPPORT BS.1201 FRENCH-1990 NUMBER OF HF SOUND BROADCASTING TRANSMITTERS USING A SINGLE CHANNEL

US-FCR

FCR FED H-08-4 VOL 3 SEC I 410-1983 TYPE "D" ENDWALL
FCR FED H-08-4 VOL 3 SEC I 406-1983 TYPE "D" INLET

GM North America

GM GMP.PVC.028-1990 PVC - Durometer Type D Hardness, Rigid, Non Appearance Injection Molding Grade

US-GSA

GSA DDD-T-531 H-1988 TOWEL, HAND; AND CLOTH HUCK COTTON [Use: ASTM D5433, ASTM D5433]

International Telecommunication Union (ITU)

ITU-T G.998.2 (2005) Amd. 4-2015 New Annex D
ITU-T RESOLUCION 38 SPANISH-2008 Coordination among ITU-T, ITU-R and ITU-D for activities relating to IMT

SE-SIS

SIS CSB-277-1956 Matkantiner

IFI/FASTNR - Industrial Fastener Institute

SECT D- Section D - Nuts

PL-PKN

PN Z04175-02-1986 Air purity protection ests for 2,4-D etermination of 2,4-D in work places y gas chromatography

IECQ - IEC: Quality Assessment System for Electronic Components

QC 302401-1993 Fixed Capacitors for Use In Electronic Equipment Part 14: Blank Detail Specification: Fixed Capacitors for Electromagnetic Interference Suppression Connection to the Supply Mains Assessment Level D (First Edition;)
QC 302401-2005 Fixed Capacitors for Use In Electronic Equipment Part 14: Blank Detail Specification: Fixed Capacitors for Electromagnetic Interference Suppression Connection to the Supply Mains Assessment Level D (Second Edition;)

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS 1075-1978 Bearing - Rod End 3/8-24 External Thd. Self-Aligning Anti-Friction Superseded - April 1978 (Rev. 2) [Use: DLA MS21151 REV D CANC NOTICE 2, DLA MS21151 REV D CANC NOTICE 2, DLA MS21151 REV D NOTICE 1, DLA MS21151 REV D NOTICE 1, DLA MS21151 REV D, D
AIA/NAS NAS 1074-1964 Turnbuckle Assemblies, Clip Locking, Assembly and Safetying of Superseded - October 1964 (Rev. 3) [Use: DLA MS33736 REV D (2), DLA MS33736 REV D (2), DLA MS33736 REV D (1), DLA MS33736 REV D (1), DLA MS33736 REV D NOTICE 1, DLA MS33736 REV D NOTICE

International Federation of Trucks and Engines

NAVISTAR CEMS AT-3-2001 Method of Calculating D(IB) and D(IC) for Heat Treatable Steels

Military Standards (MIL-STD)

MIL MIL-N-5877E-1992 NOZZLE, PRESSURE FUEL SERVICING, LOCKING, TYPE D-1, D-1R, D-2 AND D-2R, NOMINAL 2 1/2 INCH DIAMETER (SUPERSEDING MIL-N-5877D) (S/S BY SAE-AS5877)

IEC - International Electrotechnical Commission

TS 61945-2000 Integrated Circuits - Manufacturing Line Approval - Methodology for Technology and Failure Analysis (Edition 1.0)

GM Europe

GME STD 5197010-1990 Zinc 97010 D-Zn bd Zink 97010 D-Zn bd