rotary control wheel

rotary control wheel, Total:140 items.

The international standard classification for "rotary control wheel" includes: Chemical laboratories. Laboratory equipment .

The Chinese standard classification for "rotary control wheel" includes: Basic laboratory equipment .

---

Professional Standard - Light Industry

• QB/T 5773-2022 Footwear machines - Disk type outsoles stitching machine

Professional Standard - Machinery

• JB/T 9509.2-1999 High pressure autoclave with permanent rotary stirrer controller
• JB/T 11393-2013 Rotary Discfilter

Taiwan Provincial Standard of the People's Republic of China

• CNS 5526-1983 Symbols for Sequential Control (Rotary Electrical Machines)

Group Standards of the People's Republic of China

• T/HEBTSXH 001-2024 Steel Swivel Ring Flange
• T/ZZB 1589-2020 Computer control 360 degree rotate machine head template sewing machine

National Metrological Technical Specifications of the People's Republic of China

• JJF 1929-2021 Calibration Specification for Rotating Disc Electrode Atomic Emission Spectrometers

U.S. Air Force

• AIR FORCE MS24228-1958 KNOB-CONTROL DIAL, PLASTIC
• AIR FORCE MIL-V-5529 C-1993 VALVES, HYDRAULIC DIRECTIONAL CONTROL, ROTARY SELECTOR
• AIR FORCE MIL-V-5529 C NOTICE 1-1996 VALVES, HYDRAULIC DIRECTIONAL CONTROL, ROTARY SELECTOR

Aerospace Industries Association/ANSI Aerospace Standards

• AIA/NAS NASM28728/7-2001 Dial, Control, Multiturn Counters, 100 - Turn Counters, 4 - Digit
• AIA/NAS NASM28728-2001 Dial, Control, Multi-Turn Counters General Specifcation for
• AIA/NAS NASM28728/5-2001 Dial, Control, Multiturn Counters, Three Digits
• AIA/NAS NASM28728/6-2001 Dial, Control, Multiturn Counters, Three Digit, Illuminated and Nonilluminated
• NASM91528-2001 Knobs-Control@ Plastic (Round@ Concentric@ Pointer@ Spinner@ Spinner Slip-Clutch@ Bar@ Tactile@ Knob Lock Pointer@ Slip-Clutch@ and Knob Locks)
• AIA/NAS NASM91522-2003 Knob, Control, Crank, Metal Rev 1
• AIA/NAS NASM91528-2012 KNOBS, CONTROL, PLASTIC, ROUND, CONCENTRIC, POINTER, SPINNER, SPINNER SLIP-CLUTCH, BAR, TACTILE, KNOB LOCK POINTER, SLIP-CLUTCH, AND KNOB LOCKS (Rev 1)

Society of Automotive Engineers (SAE)

• SAE AS1913-6 AS1913 Knob (Undercarriage Control)
• SAE AS6390-3 AS6390 Knob (Undercarriage Control)
• SAE ARP238A-1973 Propeller Control Clearance-Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP238A-2006 Propeller Control Clearance - Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines
• ADS AS6380 Control - Single Lever - for Anti-Spin Parachutes
• SAE ARP238-1950 Propeller Control Clearance-Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP238B-2013 Propeller Control Clearance - Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP238B Propeller Control Clearance - Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP238A Propeller Control Clearance - Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP238 Propeller Control Clearance - Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines
• ADS AS3341 Control - Single Lever for Anti-Spin Parachutes
• SAE AS3341-1-1953 AS3341 Control - Single Lever - for Anti-Spin Parachutes
• SAE AS6380-1-1958 AS6380 Control - Single Lever - for Anti-Spin Parachutes
• SAE ARP237-1950 Propeller Control Clearance-Single Acting System Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP237B-2013 Propeller Control Clearance - Single Acting System Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP237A-1973 Propeller Control Clearance - Single Acting System Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP237A-2006 Propeller Control Clearance - Single Acting System Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP237 Propeller Control Clearance - Single Acting System Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP237B Propeller Control Clearance - Single Acting System, Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP237A Propeller Control Clearance - Single Acting System, Single Rotation Propeller Shaft Reciprocating Engines
• SAE ARP238A-1950 (Noncurrent)Propeller Control Clearance-Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines Reaffirmed Non-Current November 2001
• ADS AS6391 Knob (Propeller Control)
• ADS AS1914 Knob (Propeller Control)

Magyar Szabványügyi Testület

• MNOSZ 586-1951 Controlling the rotating economic chain
• MNOSZ 587-1951 Controlling the rotating economic chain
• MSZ 10616-1959 Rotary excavation work. Dig control panel
• MSZ 10542/6-1980 The track gauge of the light rail vehicle rotating disk is 600 mm

Yugoslav Association for Standardization

• JUS M.J2.131-1990 EQUIPMENT FOR EXPLORATION AND EXPLOITATION OF OIL, GAS AND Aquifers Rotary table
• JUS N.K5.053-1982 Low voltage control svvitches. Particular requirements for rotary control svvitches

Spanish Association for Standardization (UNE)

• AENOR UNE 20119-3:1989 LOW VOLTAGE CONTROL AUXILIARIES. ROTARY CONTROL SWITCHES
• UNE-EN ISO 10323:1996 SENTAL ROTARY INSTRUMENTS. BORE DIAMETERS FOR DISCS AND WHEELS (ISO 10323:1991).

Ente Nazionale Italiano di Unificazione

• UNI 3024:1950 Tram motor coaches. Pneumatic brake control lever. Its position. Rotary direction of controller.
• UNI EN ISO 10323:1996 Tental rotary instruments. Bore diameters for discs and wheels.
• UNI EN ISO 7711-2:1996 Dental rotary instruments. Diamond instruments. Discs.
• UNI EN ISO 7711-2:2011 Dentistry - Rotary diamond instruments - Part 2: Discs

Czech Standards Institute (UNMZ)

• CSN 24 4125-1952 Clamping of workpieces. Dividing plates for revolving indexing heads
• CSN 44 6226-1955 Mine ventilation. Rotating flange
• CSN 44 6236-1955 Mine ventilation. Rotating flange
• CSN 44 6223-1955 Mine ventilation. Rotating flange 90°
• CSN 44 6230-1955 Mine ventilation. Flange plate rotates directly
• CSN 24 3141-1971 Rotating machine vices (for large chuck capacity)
• CSN 44 6233-1955 Mine ventilation. Rotating flange with 90° bend
• CSN 44 6222-1955 Mine ventilation. Swivel flange elbow 15° and 30°
• CSN ON 28 0119-1966 Strength rotation test of truck box and chassis
• CSN 30 5011-1959 Bushings for rotary, speedometer and clock, mounting console

Association Francaise de Normalisation

• NF P22-468:1987 Steel construction. Bolted joints with controlled tightening. Tightening by controlled turn of nut. Determination of the angle of rotation.
• NF J38-120:2004 Ships and marine technology - Marine gyro-compasses.
• NF S91-131*NF EN ISO 10323:2013 Dentistry - Bore diameters for rotary instruments such as discs and wheels
• NF E60-160-4*NF ISO 13041-4:2004 Test conditions for numerically controlled turning machines and turning centres - Part 4 : accuracy and repeatability of positioning of linear and rotary axes
• NF S91-131:1996 Dental rotary instruments. Bore diameters for discs and wheels.
• NF EN ISO 10323:2013 Oral Medicine - Bore Diameters of Rotary Instruments Such as Discs and Wheels

American Petroleum Institute (API)

• API Spec 16RCD-2022 Specification for Rotating Control Devices (SECOND EDITION)
• API SPEC 16RCD RUSSIAN-2005 Specification for Drill Through Equipment Rotating Control Devices
• API SPEC 16RCD KAZAKH-2005 Specification for Drill Through Equipment - Rotating Control Devices (First Edition)

United States Navy

• NAVY AN5752 REV 3 VALID NOTICE 1-1960 INDICATOR - GYRO FLUX GATE COMPASS MASTER
• NAVY AN5752 REV 3-1950 INDICATOR - GYRO FLUX GATE COMPASS MASTER

General Motors do Brasil

• GMSA ETS.DM.003-1998 DISC WHEEL ROTATIVE FATIQUE TEST

Bureau of Indian Standards

• IS 7206-2024 Drilling Rigs with Rotary Table - Specification
• IS 5675-2024 Rotary-Disc Vacuum Filters-Specification
• IS 3207-1965 Specification for Engineer's Drawing Instruments, Rotating Compasses
• IS 7206-1-1986 General requirements for direct circulation rotary drilling rigs:Part 1 With rotary table
• IS 18683-2-2024 Dentistry - Rotary Diamond Instruments - Part 2 Discs

Polski Komitet Normalizacyjny (PKN)

• PN G61027-1974 Rotary drilling Rotary tables Rotary tables buschings

British Standards Institution (BSI)

• DD CLC/TS 60034-20-1:2004 Rotating electrical machines. Control motors - Stepping motors
• DD IEC/TS 60034-20-1:2002 Rotary Motor Control Motor Stepper Motor
• BS DD CLC/TS 60034-20-1:2002 Rotating electrical machines. Control motors. Stepping motors
• BS DD IEC TS 60034-20-1:2002 Rotating electrical machines - Control motors - Stepping motors
• BS DD CLC/TS 60034-20-1:2004 Rotating electrical 60034-20-1:2004) machines - Part 20-1: Control motors - Stepping motors
• BS EN ISO 7711-2:2011 Dentistry. Rotary diamond instruments. Discs
• BS EN ISO 10323:2013 Dentistry. Bore diameters for rotary instruments such as discs and wheels
• BS EN ISO 7711-2:1996 Dental rotary instruments. Diamond instruments-Discs
• BS EN 60534-3-2:2001 Industrial-process control valves. Dimensions. Face-to-face dimensions for rotary control valves except butterfly valves
• BS EN ISO 10323:1996 Dental rotary instruments. Bore diameters for discs and wheels

(U.S.) Builders Hardware Manufacturers Association

• BHMA A156.27-2011 POWER AND MANUAL OPERATED REVOLVING PEDESTRIAN DOORS

Gosstandart of Russia

• GOST 31.0101.01-1989 Control parts handwheels, swivel levers, handles, knobs. General specifications
• GOST EN 12840-2011 Safety of machine tools. Manually controlled turning machines with or without automatic control
• GOST IEC/TS 60034-20-1-2013 Rotating electrical machines. Part 20-1. Control motors-Stepping motors
• GOST 24225-1987 NC coordinate turret cutting centres. Parameters and dimensions

American National Standards Institute （ANSI)

• ANSI/HI 9.6.9-2013 Rotary Condition Monitoring
• ANSI B11.22-2001 Safety Requirements for Turning Centers and Automatic Numerically Controlled Turning Machines

U.S. Military Regulations and Norms

• ARMY MIL-G-45279-1975 GYRO, DIRECTIONAL CN-998()/ASN-43
• ARMY MIL-G-45279 NOTICE 2-1996 GYRO, DIRECTIONAL CN-998()/ASN-43

National Standardisation Body (ASRO)

• STAS 1893/2-1987 ROTATING ELECTRICAL MACHINES Rules and methodsjfor quality control
• STAS 9639-1981 Tests of metals TEST TO WEAR ON ROTARY DISK WITH ABRASIVE PAPER
• STAS SR ISO 7711-2:1995 Dental rotary instrumente. Diamond instmments. Part 2: Disks

German Institute for Standardization

• DIN 74101-2:1981-09 Steering wheels for commercial vehicles with recess for horn control knop
• DIN EN ISO 10323:1995 Dental rotary instruments — Bore diameters for discs and wheels
• DIN EN ISO 10323:2013-06 Dentistry - Bore diameters for rotary instruments such as discs and wheels (ISO 10323:2013); German version EN ISO 10323:2013
• DIN EN ISO 7711-2:1995-11 Dental rotary instruments - Diamond discs (ISO 7711-2:1992)
• DIN EN ISO 7711-2:1995 Dental rotary instruments - Diamond discs (ISO 7711-2:1992)
• DIN EN ISO 7711-2:2011-10 Dentistry - Rotary diamond instruments - Part 2: Discs (ISO 7711-2:2011); German version EN ISO 7711-2:2011

Military Standards (MIL-STD)

• MIL MIL-I-21685-1958 INDICATOR, COMPASS REPEATER, ROTATING DIAL, TYPE MW-2
• MIL MIL-V-5529C-1993 VALVES, HYDRAULIC DIRECTIONAL CONTROL, ROTARY SELECTOR (SUPERSEDING MIL-V-5529B)

Swedish Institute for Standards

• SIS SMS 1946-1962 Rod spiral, complete rotation, type PSH, metric rotation M
• SIS SMS 1924-1962 Metric coarse spiral M, rod spiral, rotation relaxation

American Water Works Association (AWWA)

• AWWA MTC95043 Treatment of PAC Slurry Using Rotating Disk Membranes

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

• ASHRAE SA-96-10-5-1996 Controlling Rotary Desiccant Wheels for Dehumidification and Cooling

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

• TCVN 7681-8-2007 Test conditions for numerically controlled turning machine and turning centres.Part 8: Evaluation of thermal distortion

Korean Agency for Technology and Standards (KATS)

• KS P ISO 10323:2007 Dental rotary instruments-Bore diameters for discs and wheels
• KS P ISO 10323:2014 Dental rotary instruments－Bore diameters for discs and wheels
• KS P ISO 7711-2-2020 Dentistry — Rotary diamond instruments — Part 2: Discs
• KS P ISO 7711-2:2020 Dentistry — Rotary diamond instruments — Part 2: Discs
• KS P ISO 10323-2020 Dentistry — Bore diameters for rotary instruments such as discs and wheels
• KS P ISO 10323:2020 Dentistry — Bore diameters for rotary instruments such as discs and wheels

International Organization for Standardization (ISO)

• ISO 10323:1991 Dental rotary instruments; bore diameters for discs and wheels
• ISO 10323:2013 Dentistry - Bore diameters for rotary instruments such as discs and wheels

Danish Standards Foundation

• DANSK DS/EN ISO 10323:2013 Dentistry - Bore diameters for rotary instruments such as discs and wheels
• DS/CLC/TS 60034-20-1:2004 Rotating electrical machines - Part 20-1: Control motors - Stepping motors
• DANSK DS/CLC/TS 60034-20-1:2004 Rotating electrical machines - Part 20-1: Control motors - Stepping motors
• DS/EN ISO 10323:2013 Dentistry - Bore diameters for rotary instruments such as discs and wheels
• DANSK DS/EN ISO 7711-2:2011 Dentistry - Rotary diamond instruments - Part 2: Discs

European Committee for Standardization (CEN)

• EN ISO 10323:2013 Dentistry - Bore diameters for rotary instruments such as discs and wheels
• EN ISO 10323:1995 Dental Rotary Instruments - Bore Diameters for Discs and Wheels (ISO 10323 : 1991)

The Directorate General of Specifications and Metrology (DGSM)

• OS GSO ISO 10323:2015 Dentistry -- Bore diameters for rotary instruments such as discs and wheels
• OS GSO IEC/TS 60034-20-1:2015 Rotating electrical machines - Part 20-1: Control motors - Stepping motors

GCC Standardization Organization

• GSO IEC/TS 60034-20-1:2015 Rotating electrical machines - Part 20-1: Control motors - Stepping motors
• GSO ISO 7711-2:2016 Dentistry -- Rotary diamond instruments -- Part 2: Discs

Kingdom of Bahrain Testing and Metrology Directorate

• BH GSO IEC/TS 60034-20-1:2016 Rotating electrical machines - Part 20-1: Control motors - Stepping motors
• BH GSO ISO 7711-2:2017 Dentistry -- Rotary diamond instruments -- Part 2: Discs

Comitato Elettrotecnico Italiano

• CEI CLC/TS 60034-20-1:2005 Rotating electrical machines - Part 20-1: Control motors - Stepping motors

European Committee for Electrotechnical Standardization（CENELEC）

• CLC/TS 60034-20-1:2004 Rotating electrical machines - Part 20-1: Control motors - Stepping motors

Underwriter Laboratories of Canada (ULC)

• CAN/ULC-S522-2007(C2019) Standard for fire extinguisher and rotating hose reel hoses

Standards Norway

• NS-EN ISO 10323:1995 Dental rotary instruments — Bore diameters for discs and wheels (ISO 10323:1991)

Others: control rotation,rotating ring,rotary control wheel,Rotary disk speed,Analysis Dashboard,Rotary ring device,Rotary test disc,Rotary adjustment dial,Turntable Control,Drilling Rotary Control Equipment,Rotating motor built-in thermal protection (PTC) control unit