Initial Decomposition and Full Decomposition

Initial Decomposition and Full Decomposition, Total:66 items.

The international standard classification for "Initial Decomposition and Full Decomposition" includes: Aerospace engines and propulsion systems , Protection against dangerous goods , Filters, seals and contamination of fluids , Switching and signalling systems .

The Chinese standard classification for "Initial Decomposition and Full Decomposition" includes: Spacecraft power system , Marking, packaging, transport and storage in general , Hydraulic and pneumatic device , Communication network technical system , Communication network number, signal and connection , Telecommunication services .

Professional Standard - Aerospace

QJ 1468-1988 Test Methods for Initial Thermal Decomposition Temperature and Off Temperature of Composite Solid Propellant

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22052-2008 Test method for vapor pressure - Temperature relationship and initial decompostition temperature of liquids by isoteniscope
GB/T 14041.1-2007 Hydraulic fluid power—Filter elements—Part 1:Verification of fabrication integrity and determination of the first bubble point

Professional Standard - Post and Telecommunication

YD/T 1522.3-2006 Technical Requirements for Session Initiation Protocol Part 3:Interworking between ISUP and SIP
YD/T 1522.1-2006 Technical Requirements for Session Initiation Protocol Part 1:Basic Session Initiation Protocol
YD/T 1522.31-2009 Technical Requirements for Session Initiation Protocol Part 3 Interworking between ISUP and SIP-Supplement 1
YD/T 1938.1-2009 Test method for Session Initiation Protocol (SIP) Part 1：Basic Session Initiation Protocol

American Association of State Highway and Transportation Officials

TP6-1993 Standard Test Method for the Measurement of Initial Asphalt Adsorption and Desorption in the Presence of Moisture (Edition 1A)

Association Francaise de Normalisation

NF X02-101:1981 Signs and symbols. Elementary algebra and analysis. Analytical geometry and vector analysis.
NF EN 62740:2015 Initial cause analysis (RCA)
NF E17-401-5*NF EN 1434-5:2022 Thermal energy meters - Part 5 : initial verification tests
NF E17-401-5*NF EN 1434-5+A1:2019 Thermal energy meters - Part 5 : initial verification tests
NF EN 1434-5:2022 Thermal energy meters - Part 5: initial verification tests
NF E17-401-5/IN1*NF EN 1434-5/IN1:2019 Thermal energy meters - Part 5 : initial verification tests
NF E17-401-5:2007 Heat meters - Part 5 : initial verification tests.

American Society for Testing and Materials (ASTM)

ASTM D2879-83 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-23 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
ASTM D2879-10 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

British Standards Institution (BSI)

BS PAS 110:2010 Specification for whole digestate, separated liquor and separated fibre derived from the anaerobic digestion of source-segregated biodegradable materials

Korean Agency for Technology and Standards (KATS)

KS X ISO/IEC 14443-3:2020 Cards and security devices for personal identification — Contactless proximity objects — Part 3: Initialization and anticollision
KS X ISO/IEC 14443-3-2020 Cards and security devices for personal identification — Contactless proximity objects — Part 3: Initialization and anticollision
KS I ISO 2942:2005 Hydraulic fluid power－Filter elements－Verification of fabrication integrity and determination of the first bubble point

International Organization for Standardization (ISO)

ISO/IEC 14443-3:2018 Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision
ISO 2942:2004 Hydraulic fluid power - Filter elements - Verification of fabrication integrity and determination of the first bubble point

Engineering Sciences Data Unit (ESDU)

ESDU 86011 B-2000 Numerical methods for the solution of ordinary differential equations: initial value problems.
ESDU 86011 A-1993 NUMERICAL METHODS FOR THE SOLUTION OF ORDINARY DIFFERENTIAL EQUATIONS: INITIAL VALUE PROBLEMS

Bureau of Indian Standards

IS/ISO/IEC 14443-3-2018 Cards and Security Devices for Personal Identification-Contactless Proximity Objects - Part 3 Initialization and Anti-Collision
IS/ISO/IEC 15693-2-2019 Cards and Security Devices for Personal Identification Contactless Vicinity Objects - Part 2 Air Interface and Initialization

American Gear Manufacturers Association

AGMA 09FTM12-2009 The Anatomy of a Micropitting Induced Tooth Fracture Failure - Causation, Initiation, Progression and Prevention

Swedish Institute for Standards

SS-EN 1434-5:2022 Thermal energy meters - Part 5: Initial verification tests
SS-EN 1434-5:2015 Heat meters - Part 5: Initial verification tests

Institute of Electrical and Electronics Engineers (IEEE)

Overview and Insight: Resilience Across the Education Ecosystem During the COVID-19 Pandemic Overview and Insight: Resilience Across the Education Ecosystem During the COVID-19 Pandemic

Spanish Association for Standardization (UNE)

UNE-EN 1434-5:2007 Heat meters - Part 5: Initial verification tests
UNE-EN 1434-5:1997 HEAT METERS. PART 5: INITIAL VERIFICATION TEST.
AENOR UNE-EN 1434-5:2016 Heat meters - Part 5: Initial verification tests
UNE-EN 1434-5:2023 Thermal energy meters - Part 5: Initial verification tests

Gosstandart of Russia

GOST R EN 1434-5-2011 Heat meters. Part 5. Initial verification tests
GOST 26239.0-1984 Semiconductor silicon, raw materials for its production and quartz. General requirements for methods of analysis
GOST R EN 1434-5-2006 Heat meters. Part 5. Initial verification tests

Lithuanian Standards Office

LST EN 1434-5-2007 Heat meters - Part 5: Initial verification tests

European Committee for Standardization (CEN)

EN 1434-5:2015 Heat meters - Part 5: Initial verification tests
EN 1434-5:2007 Heat meters - Part 5: Initial verification tests
EN 1434-5:1997 Heat meters - Part 5: Initial verification tests (Incorporates Amendment A1: 2002)
prEN 1434-5-2020 Thermal energy meters - Part 5: Initial verification tests

Ente Nazionale Italiano di Unificazione

UNI EN 1434-5:2019 Thermal energy meters - Part 5: Initial verification tests
UNI EN 1434-5:2022 Thermal energy meters - Part 5: Initial verification tests
UNI EN 1434-5:2006 Heat meters - Part 5: Initial verification tests

Canadian Standards Association (CSA)

CSA C900.5-2006(R2011) Heat Meters - Part 5: Initial Verification Tests
CSA C900.5-2021 Thermal energy meters — Part 5: Initial verification tests
CAN/CSA-ISO/IEC 14443-3-2019 Cards and security devices for personal identification - Contactless proximity objects - Part 3: Initialization and anticollision

Standards Norway

NS-EN 1434-5:2015+A1:2019 Thermal energy meters - Part 5: Initial verification tests
NS-EN 1434-5:2007 Heat meters - Part 5: Initial verification tests
NS-EN 1434-5:1997 Heat meters — Part 5: Initial verification tests
NS-EN 1434-5:2015 Heat meters - Part 5: Initial verification tests

Danish Standards Foundation

DANSK DS/EN 1434-5+A1:2019 Thermal energy meters – Part 5: Initial verification tests
DS/EN 1434-5:2007 Heat meters - Part 5: Initial verification tests
DANSK DS/EN 1434-5:2015 Heat meters – Part 5: Initial verification tests
DANSK DS/ISO/IEC 14443-3/AMD 1:2018 Cards and security devices for personal identification – Contactless proximity objects – Part 3: Initialization and anticollision

German Institute for Standardization

DIN EN 1434-5:2023 Thermal energy meters - Part 5: Initial verification tests
DIN EN 1434-5:2016-02 Heat meters - Part 5: Initial verification tests
DIN EN 1434-5:2007 Heat meters - Part 5: Initial verification tests English version of DIN EN 1434-5:2007-05
DIN EN 1434-5:2007-05 Heat meters - Part 5: Initial verification tests

Standard Association of Australia （SAA）

AS ISO/IEC 14443.3:2022 Cards and security devices for personal identification — Contactless proximity objects, Part 3: Initialization and anticollision

Austrian Standards

OENORM EN 1434-5-2020 Thermal energy meters - Part 5: Initial verification tests

Others: Propellant initial thermal decomposition temperature and deflagration,Initial Decomposition and Full Decomposition