Electrostatic supply

Electrostatic supply, Total:157 items.

The international standard classification for "Electrostatic supply" includes: Motors , Rotating machinery , Electroacoustics .

The Chinese standard classification for "Electrostatic supply" includes: Electromagnetic compatibility , Asynchronous machine , Synchronous machine , Electric rotating machinery in general , Acoustic Measurement .

Group Standards of the People's Republic of China

T/CBMCA 048-2023 Full process management specifications for wire and cable suppliers in the construction project supply chain
T/CAS 311.2-2018 Green supply chain management of electrical and electronic products―Part 2:Procurement
T/CAS 827-2024 Electric and electronic industry — requirements of zero-waste supply chain’s assessment
T/CAS 826-2024 Electric and electronic industry — technical guidance for the construction of zero-waste supply chain
T/ESD 4001-2023 Specifications for the assessment of qualified suppliers of anti-static products
T/CAS 311.1-2018 Green supply chain management of electrical and electronic products―Part 1:General rule
T/FSSDECA 001-2021 Specification for green suppliers of electric and electronic products

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37977.32-2019 Electrostatics—Part 3-2:Methods for simulation of electrostatic effects—Machine model(MM) electrostatic discharge test waveform
GB/T 22670-2018 Test procedures for converter-fed three phase cage induction motors

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 20161-2006 Cage induction motors when fed from converters application guide
GB/T 20161-2008 Cage induction motors when fed from converters - Application guide
GB/T 21209-2007 Guide for the design and performance of cage induction motors specifically designed for converter supply
GB/T 22670-2008 Test procedures for converter-fed three phase cage induction motors
GB/T 24625-2009 Guide for the design and application of synchronous motors for converter supply

Taiwan Provincial Standard of the People's Republic of China

CNS 11569-1986 D.C. Power Sappey for Shore Use

未注明发布机构

CSA C22.2 No.187-2020 Electrostatic air cleaners
CSA C282-2019 Emergency power supply for buildings

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 20441.6-2017 Electroacoustics-Measurement microphones-Part 6:Electrostatic actuators for determination of frequency response

IN-BIS

IS 9254-1979 Electrostatic Precipitator Supplier Data Sheet
IS 8885-1978 Electrograph specifications

ZA-SANS

SANS 1816:2005 Electricity supply - Quality of supply: Power quality instruments
NRS 048-4-2009 Electricity supply - Quality of supply Part 4: Application practices for licencees
NRS 048-4-1999 Electricity supply - Quality of supply Part 4: Application guidelines for utilities

United States Navy

NAVY MIL-F-22963 B (1)-1985 FILTER, AIR, ELECTROSTATIC (PRECIPITATOR) WITH POWER SUPPLY FOR ENVIRONMENTAL CONTROL SYSTEMS
NAVY MIL-F-22963 B-1973 FILTER, AIR, ELECTROSTATIC (PRECIPITATOR) WITH POWER SUPPLY FOR ENVIRONMENTAL CONTROL SYSTEMS
NAVY MIL-P-15736 D SUPP 1A-1973 POWER SUPPLY, METALLIC RECTIFIER, NAVAL SHIPBOARD
NAVY MIL-P-15736 D-1965 POWER SUPPLY, METALLIC RECTIFIER, NAVAL SHIPBOARD
NAVY MIL-P-15736 D NOTICE 1-1998 POWER SUPPLY, METALLIC RECTIFIER, NAVAL SHIPBOARD
NAVY MIL-P-15736 D (4)-1990 POWER SUPPLY, METALLIC RECTIFIER, NAVAL SHIPBOARD

CZ-CSN

CSN 35 1000-1970 Static induction apparatus (power transformers and reactors)
CSN 33 3080-1978 Electric engineering regulations. Compensation of inductive power by static condensers

GSO

OS GSO IEC 61340-3-2:2014 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms
BH GSO IEC 61340-3-2:2016 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms
GSO IEC 62391-2:2014 Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application
GSO IEC 62314:2015 Solid-state relays
OS GSO IEC 61340-3-1:2014 Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
BH GSO IEC 61340-3-1:2016 Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
GSO IEC 61340-4-4:2015 Electrostatics -- Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
OS GSO IEC 61340-4-4:2015 Electrostatics -- Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)

SCC

DANSK DS/EN 61340-3-2:2007 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms
CEI EN 61340-3-2:2007 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects Machine model (MM) electrostatic discharge test waveforms
CEI 14-4/8:2001 Powers transformers - Application guide
UNE-EN 61340-3-2:2003 Electrostatics -- Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) - Component testing.
BS EN 61340-4-4:2012+A1:2015 Electrostatics-Standard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers (FIBC)
BS IEC 60034-17:1998 Rotating electrical machines-Cage induction motors when fed from converters. Application guide
BS DD IEC/TS 60034-17:2002 Rotating electrical machines-Cage induction motors when fed from converters. Application guide
BS 775:1956 Contactors when supplied seperatly or in combination with other gear
BS 1556:1949 Electric immersion heaters for domestic hot water supply
BS 775:1938 Contactors when supplied separately or in combination with other gear
CEI 11-29:1998 Alimentatori per precipitatori elettrostatici
CEI EN 61340-3-1:2007 Electrostatics - Part 3-1: Methods for simulation of electrostatic effects Human body model (HBM) electrostatic discharge test waveforms
DANSK DS/EN 61340-3-1:2007 Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
MIL MIL-D-9129/9-1986 HOLDERS, DISCHARGER, ELECTROSTATIC
MIL MIL-DTL-9129/9A-2009 Holders, Discharger, Electrostatic
BS EN 61340-3-1:2002 Electrostatics. Methods for simulation of electrostatic effects-Human body model (HBM). Component testing
CAN/CSA-C282-M89-1989 Emergency power supply for buildings
CSA C282-15:2015 Emergency power supply for buildings
CAN/CSA-C282-2000 Emergency power supply for buildings
BS PD IEC/TS 61340-4-2:2013 Electrostatics-Standard test methods for specific applications. Electrostatic properties of garments
CSA C282-1977 Alimentation électrique de secours des bâtiments
CAN/CSA-C282-2005 Emergency power supply for buildings
CSA C22.2 No.107.1-1995 General Use Power Suppliers
05/30127809 DC IEC 61340-3-2 ED.2. Electrostatics. Part 3-2. Methods for simulation of electrostatic effects. Machine model (MM). Component testing
CSA C282-2009 Alimentation électrique de secours des bâtiments
UNE 203001-17:2000 Rotating electrical machines. Part 17: Cage induction motors when fed from converters. Application guide.
IEC TR 60034-17:1992 Rotating electrical machines - Part 17: Guide for the application of cage induction motors when fed from converters
DANSK DS/CLC/TS 60034-17:2004 Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
CEI EN 61340-4-4:2012 Electrostatics Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
CEI EN IEC 62053-21:2022 Equipment for measuring electrical energy - Special requirements Part 21: Static active energy meters (AC) (classes 0.5, 1 and 2)
CSA C22.2 No.187-M1986-1986(R2008) Electrostatic Air Cleaners
IEC TS 60034-17:1998 Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
CEI EN 61340-4-4/A1:2012 Electrostatics Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
CSA C22.2 No.187-2009(R2014) Electrostatic air cleaners
DANSK DS/EN IEC 61340-4-4:2018 Electrostatics – Part 4-4: Standard test methods for specific applications – Electrostatic classification of flexible intermediate bulk containers (FIBC)
CEI EN IEC 61340-4-4:2018 Electrostatics Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
BS 853:1981 Specification for calorifiers and storage vessels for central heating and hot water supply
CSA C22.2 No.187-M1982-1982 Electostatic Air Cleaners
DANSK DS/EN 61340-4-4/A1:2012 Electrostatics – Part 4-4: Standard test methods for specific applications – Electrostatic classification of flexible intermediate bulk containers (FIBC)
DANSK DS/EN 61340-4-4:2012 Electrostatics – Part 4-4: Standard test methods for specific applications – Electrostatic classification of flexible intermediate bulk containers (FIBC)
10/30227697 DC BS EN 834. Heat cost allocators for the determination of the consumption of room heating radiators. Appliances with electrical energy supply

ESD - ESD ASSOCIATION

SP5.2.1-2012 Electrostatic Discharge Sensitivity Testing - Machine Model (MM) Alternative Test Method: Supply Pin Ganging Component Level

European Committee for Electrotechnical Standardization（CENELEC）

EN 61340-3-2:2007 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms
EN 61340-3-1:2007 Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
CLC/TS 60034-17:2004 Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide

CENELEC - European Committee for Electrotechnical Standardization

EN 61340-3-2:2002 Electrostatics Part 3-2: Methods for Simulation of Electrostatic Effects - Machine Model (MM) - Component Testing
EN 61340-3-1:2002 Electrostatics - Part 3-1: Methods for Simulation of Electrostatic Effects - Human Body Model (HBM) - Component Testing
EN IEC 61340-4-4:2018 Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
EN 61340-4-4:2005 Electrostatics Part 4-4: Standard test methods for specific applications – Electrostatic classification of flexible intermediate bulk containers (FIBC)
EN 61340-4-4:2012 Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)

International Electrotechnical Commission (IEC)

IEC PAS 62180:2000 Electrostatic discharge (ESD) sensitive testing machine model (MM)
IEC TS 60034-17:2002 Cage induction motors when fed from converters application guide
IEC 61340-3-2:2006 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms
IEC 61340-3-1:2006 Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
IEC 61094-6:2004 Measurement microphones - Part 6: Electrostatic actuators for determination of frequency response

Danish Standards Foundation

DS/EN 61340-3-2:2007 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms
DS/EN 61340-3-1:2007 Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
DS/CLC/TS 60034-17:2004 Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
DS/EN 61340-4-4:2012 Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)

Association Francaise de Normalisation

NF EN 61340-3-2:2007 Electrostatics - Part 3-2: methods for simulating electrostatic effects - Electrostatic discharge test waveforms for machine models (MM)
NF EN 61340-3-1:2007 Electrostatics - Part 3-1: Methods for the simulation of electrostatic effects - Electrostatic discharge test waveforms for the human body model (HBM)
NF C97-336*NF EN 61094-6:2005 Measurement microphones - Part 6 : electrostatic actuators for determination of frequency response
NF C20-790-3-1*NF EN 61340-3-1:2007 Electrostatics - Part 3-1 : methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
NF C20-790-3-2*NF EN 61340-3-2:2007 Electrostatics - Part 3-2 : methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms
NF C20-790-4-4*NF EN IEC 61340-4-4:2018 Electrostatics - Part 4-4 : standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
NF C20-790-4-4/A1:2015 Electrostatics - Part 4-4 : standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
NF Q13-003:1968 Paper. Characteristics of static capacitor papers.

European Committee for Standardization (CEN)

EN 834:2013 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply (Incorporating corrigendum April 2015)

AENOR

UNE-EN 61340-3-2:2007 Electrostatics -- Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms (IEC 61340-3-2:2006)
UNE-EN 61340-3-1:2008 Electrostatics -- Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0300-3-2-2007 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms (IEC 61340-3-2:2006); German version EN 61340-3-2:2007

Society of Automotive Engineers (SAE)

SAE AS3113-1-1949 AS3113 "Driwik" Silent Static Discharger

Lithuanian Standards Office

LST EN 61340-3-2-2007 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms (IEC 61340-3-2:2006)

Korean Agency for Technology and Standards (KATS)

KS C IEC 61340-3-2-2022 Electrostatics－Part 3－2：Methods for simulation of electrostatic effects－Machine model(MM)－Component testing
KS C IEC 61340-3-2-2007(2017) Electrostatics－Part 3－2：Methods for simulation of electrostatic effects－Machine model(MM)－Component testing
KS C IEC 61340-3-2-2007(2022) Electrostatics－Part 3－2：Methods for simulation of electrostatic effects－Machine model(MM)－Component testing
KS C IEC 61340-3-2:2007 Electrostatics-Part 3-2:Methods for simulation of electrostatic effects-Machine model(MM)-Component testing
KS C IEC 61094-6:2014 Measurement microphones－Part 6：Electrostatic actuators for determination of frequency response
KS C IEC 61094-6-2007(2012) Measurement microphones－Part 6：Electrostatic actuators for determination of frequency response
KS C IEC 61340-3-1:2007 Electrostatics-Part 3-1:Methods for simulation of electrostatic effects-Human body model(HBM)-Component testing
KS C IEC 61094-6:2007 Measurement microphones-Part 6:Electrostatic actuators for determination of frequency response
KS C IEC 61094-6A-2017(2022) Electroacoustics — Measurement microphones — Part 6: Electrostatic actuators for determination of frequency response
KS C IEC 60034-17-2022 Rotating electrical machines — Part 17: Cage induction motors when fed from converters — Application guide
KS C IEC 60255-12:2005 Electrical relays－Part 12：Directional relays and power relays with two input energizing quantities
KS C IEC 61340-4-4-2022 Electrostatics－Part 4－4：Standard test methods for specific applications－Electrostatic classification of flexible intermediate bulk containers(FIBC)
KS C IEC 60034-17:2020 Rotating electrical machines — Part 17: Cage induction motors when fed from converters — Application guide
KS C IEC 61094-6-2014 Measurement microphones－Part 6：Electrostatic actuators for determination of frequency response

British Standards Institution (BSI)

BS EN 61340-3-2:2007 Electrostatics - Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms
BS EN 61094-6:2005 Measurement microphones - Electrostatic actuators for determination of frequency response
BS EN 61340-3-1:2007 Electrostatics - Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms
BS EN IEC 61340-4-4:2018 Electrostatics. Standard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers (FIBC)
TH 20338-1999 World Electricity Supplies
BS IEC 61340-4-6:2011 Electrostatics. Standard test methods for specific applications. Wrist straps
BS EN 61340-4-6:2015 Electrostatics. Standard test methods for specific applications. Wrist straps
TH 20338-1997 World Electricity Supplies
TH 20338-2000 World Electricity Supplies
BS EN 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformers and power supply units for bells and chimes

GOSTR

GOST IEC 61340-4-4-2020 Electrostatics. Standard test methods for specific applications. Electrostatic classification of flexible intermediate bulk containers
GOST IEC 61340-4-8-2017 Electrostatics. Part 4-8. Test methods for specific applications. Electrostatic discharge shielding. Bags

RU-GOST R

GOST 32792-2014 Static rectifiers for railway power supply devices. Safety requirements and control methods
GOST R 53734.4.6-2012 Electrostatics. Part 4.6. Test methods for specific application. Wrist straps

US-FCR

FCR AF M88-9 CHAP 1-1984 ELECTRIC POWER SUPPLY AND DISTRIBUTION
FCR AF M32-1080-1995 ELECTRICAL POWER SUPPLY AND DISTRIBUTION
FCR FED H-08-4 VOL 4-E-N-19-1988 BATTERY POWERED EMERGENCY LIGHTS

Japanese Industrial Standards Committee (JISC)

JIS C 61340-3-2:2011 Electrostatics -- Part 3-2: Methods for simulation of electrostatic effects -- Machine model (MM) electrostatic discharge test waveforms
JIS C 61340-4-4:2021 Electrostatics -- Part 4-4: Standard test methods for specific applications -- Electrostatic classification of flexible intermediate bulk containers (FIBC)

German Institute for Standardization

DIN EN 61340-3-1:2008 Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms (IEC 61340-3-1:2006); German version EN 61340-3-1:2007
DIN EN 61340-3-2:2007 Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms (IEC 61340-3-2:2006); German version EN 61340-3-2:2007
DIN 40030:1993-09 Rated voltages of DC-motors directly fed by controlled static power convertors from AC-power systems

U.S. Air Force

AIR FORCE MIL-DTL-26517 B-2000 POWER SUPPLY, TRANSFORMER-RECTIFIER, AIRCRAFT, GENERAL SPECIFICATION FOR

AT-ON

ONORM EN 2282-1992 Aerospace series - Characteristics of aircraft electrical supplies

KR-KS

KS C IEC 60034-17-2020 Rotating electrical machines — Part 17: Cage induction motors when fed from converters — Application guide

SE-SIS

SIS SS-ISO 6858:1985 Aircraft — Ground support electrical supplies — General requirements

International Organization for Standardization (ISO)

IEC 61340-4-4:2005 Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)

Underwriters Laboratories (UL)

UL 867-1989 Electrostatic air cleaners
UL 867-2000 UL Standard for Safety Electrostatic Air Cleaners Fourth Edition; Reprinted with revisions through and including December 21, 2007

ES-UNE

UNE-EN IEC 61340-4-4:2018 Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) (Endorsed by Asociación Española de Normalización in May of 2018.)

U.S. Military Regulations and Norms

ARMY MIL-C-70943 (1)-1991 CIRCUIT CARD ASSEMBLY, MICROPROCESSOR: 12922117