Waterworks 02

Waterworks 02, Total:169 items.

The international standard classification for "Waterworks 02" includes: .

The Chinese standard classification for "Waterworks 02" includes: .

未注明发布机构

FORD FLTM BV 101-02-2000 COLD ADHESION TEST FOR BODY SEALERS Replaces FLTM BV 001-02
ATV-DVWK-M 256-7:2001-02 Requirements for operating measuring equipment on wastewater treatment plants
FORD FLTM BN 102-02-2001 FLEX TEST FOR POLYMERIC COATED FABRICS, GENUINE LEATHERS, AND WOVEN FABRICS Replaces FLTM BN 002-02, FLTM EU-BN 002-02 [Replaced: FORD FLTM BN 002-02, FORD FLTM EU-BN 002-02]
DVGW RS W:2011-02 DVGW Rundschreiben W 02/11 Water meters - Measurement accuracy and backflow behavior of paddle wheel counters
FORD FLTM BO 150-02-2001 RESISTANCE OF TEXTILES TO ACCELERATED AGEING BY XENON ARC Replaces FLTM EU-BO 050-02 [Replaced: FORD FLTM EU-BO 050-02]
FORD FLTM BO 111-02-2001 TEST FOR INDENTATION AND RECOVERY Replaces FLTM BO 011-02, FLTM EU-BN 020-01, FLTM EU-BO 011-02 [Replaced: FORD FLTM EU-BN 020-01] [Superseded: FORD FLTM EU-BO 011-02]
FORD FLTM BN 113-02-2001 RESISTANCE TO HEAT AGING OF BONDED TRIM ASSEMBLIES Replaces FLTM BN 013-02 [Replaced: FORD FLTM BN 013-02]
FORD FLTM BV 155-02-2001 ADHESION OF SOUND DEADENER PADS AFTER HEAT AGING Replaces FLTM EU-BV 055-02 [Replaced: FORD FLTM EU-BV 055-02]
FORD FLTM BI 120-02-2001 DETERMINATION OF"THROWING POWER" OF ELECTROCOATING MATERIALS Replaces FLTM BI 020-02 A, FLTM BI 020-02 C, FLTM EU-BI 020-02 A, FLTM EU-BI 020-02 C [Replaced: FORD FLTM BI 020-02 A, FORD FLTM BI 020-02 C, FORD FLTM EU-BI 020-02 A, FORD FLTM EU-BI 020-02 C
DVGW W Information Nr 48:1997-02 Application of Continuous Turbidity Measurement in Water Plants
FORD FLTM BZ 104-02-2001 PERMEATION OF RUBBER-COATED DIAPHRAGM CLOTH Replaces FLTM BZ 004-02 [Replaced: FORD FLTM BZ 004-02]
FORD FLTM AJ 150-02-2001 MOLYBDENUM DISULFIDE AND POLYETHYLENE IN GREASES Replaces FLTM EU-AJ 050-02 [Replaced: FORD FLTM EU-AJ 050-02]
FORD FLTM BO 115-02-2001 RESISTANCE OF PLASTICS TO ARTIFICIAL WEATHERING Replaces FLTM BO 015-02, FLTM EU-BO 015-02 [Replaced: FORD FLTM BO 015-02, FORD FLTM EU-BO 015-02]
FORD FLTM BV 151-02-2001 COLD ADHESION OF SOUND DEADENER PADS Replaces FLTM EU-BV 051-02 [Replaced: FORD FLTM EU-BV 051-02]
FORD FLTM BS 151-02-2000 DETERMINATION OF FORM STABILITY Replaces FLTM EU-BS 051-02 [Replaced: FORD FLTM EU-BS 051-02]
DVGW Abschlussbericht W 02-01-10:2015-01 Analysis report on the effect of silicone surfactants on the raw water quality of water plants
FORD FLTM BV 159-02-2001 FLAMMABILITY OF SEALERS BY WELDING Replaces FLTM EU-BV 059-02 [Replaced: FORD FLTM EU-BV 059-02]
FORD FLTM BI 115-02-2001 EVALUATION OF CATALYSED REPAIR PAINT ENAMELS Replaces FLTM BI 015-02, FLTM EU-BI 015-02 [Replaced: FORD FLTM BI 015-02, FORD FLTM EU-BI 015-02]
FORD FLTM BN 150-02-2001 ASSESSMENT OF TEAR STRENGTH OF FABRICS AND ARTIFICIAL LEATHERS Replaces FLTM EU-BN 050-02 [Replaced: FORD FLTM EU-BN 050-02]
0 VDI-Richtlinien-Katalog:2006-02
FORD FLTM BI 112-02-2001 TUKON HARDNESS OF PAINT Replaces FLTM BI 012-02, FLTM EU-BI 012-02 [Replaced: FORD FLTM BI 012-02, FORD FLTM EU-BI 012-02]
FORD FLTM BI 106-02-2001 INTERCOAT PAINT ADHESION TEST Replaces FLTM BI 006-02, FLTM EU-BI 006-02 [Replaced: FORD FLTM EU-BI 006-02]
FORD FLTM BI 101-02-2001 MEASUREMENT OF CONTRAST RATIO OF PAINT DRY HIDING POWER Replaces FLTM BI 001-02 [Replaced: FORD FLTM BI 001-02]
FORD FLTM BO 117-02-2001 IMPACT TEST FOR PLASTICS Replaces FLTM BO 017-02 [Replaced: FORD FLTM BO 017-02]
VDS 2835:2001-02 Application of ISO 9001:2000
FORD FLTM BU 152-02-2000 STAINING TEST FOR ADHESIVES ON TRIM MATERIALS Replaces FLTM EU-BU 052-02 [Replaced: FORD FLTM EU-BU 052-02]
DVGW W 628 E:2008-02 Internal coating and lining of steel tanks for water works
FORD FLTM BV 108-02-2000 VOLUME CHANGE TEST FOR ADHESIVES AND SEALANTS Replaces FLTM BV 008-02 [Replaced: FORD FLTM BV 008-02]
FORD FLTM BO 129-02-2001 WATER ABSORPTION - ELASTOMERS AND PLASTICS Replaces FLTM BO 029-02 [Replaced: FORD FLTM BO 029-02]
FORD FLTM BI 104-02-2001 CONDENSING WATER VAPOR TEST Replaces FLTM BI 004-02
FORD FLTM AQ 101-02-2001 DETERMINATION OF PHOSPHATE COATING WEIGHTS CAUSTIC SODA METHOD Replaces FLTM EU-AQ 001-02 [Replaced: FORD FLTM EU-AQ 001-02]
FORD FLTM BV 107-02-2000 STAINING TESTS FOR WINDSHIELD SEALERS Replaces FLTM BV 007-02, FLTM EU-BV 007-02 [Replaced: FORD FLTM BV 007-02, FORD FLTM EU-BV 007-02]
FORD FLTM AQ 106-02-2001 CONTROL TEST - CHROMATE PASSIVATION Replaces FLTM EU-AQ 006-02 [Replaced: FORD FLTM EU-AQ 006-02]
FORD FLTM AJ 106-02-2001 MOLYBDENUM DISULFIDE, LITHIUM SOAP, AND POLYETHYLENE IN GREASES Replaces FLTM AJ 006-02 [Replaced: FORD FLTM AJ 006-02]
DVGW RS W:2016-02 DVGW circular W 02/16 for the prevention of impairments to drinking water and the pipe network when withdrawing firefighting water
FORD FLTM BI 154-02-2001 DETERMINATION OF THE VOLUME OF NON-VOLATILE SOLIDS IN PAINT Replaces FLTM EU-BI 054-02 [Replaced: FORD FLTM EU-BI 054-02]
FORD FLTM BQ 104-02-2000 HUMIDITY RESISTANCE TESTING Replaces FLTM BQ 004-02
FORD FLTM BI 113-02-2001 RESISTANCE TO ACID SPOTTING Replaces FLTM BI 013-02, FLTM EU-BI 013-02 [Replaced: FORD FLTM EU-BI 013-02]
FORD FLTM BV 153-02-2001 AGING OF SEALERS AND HEAVY MASTIC ADHESIVES Replaces FLTM EU-BV 053-02 [Replaced: FORD FLTM EU-BV 053-02]

American Concrete Institute

ACI 318-02 Notes Portland Cement Association (PCA) Notes on ACI 318-02
ACI 318-02/318R-02 Notes Set Building Code Requirements for Structural Concrete with Commentary & (PCA) Notes on ACI 318-02

SE-SIS

SIS SEN 30 02 36-1957 Crust input, withdrawal SEN30 02 40 and SEN30 02 42
SIS SEN 30 02 35-1957 Soil investment, withdrawal of SEN 30 02 39 and SEN 30 02 41
SIS 14 41 02-1969 Aluminium 41 02
SIS SEN 30 02 44-1957 Copper tube wooden rod insertion, 10A, 250V, pole withdrawal SEN30 02 40 and SEN30 02 42
SIS SS 14 38 02-1990 Welding electrodes — Tubular wire 38 02
SIS SEN 30 02 30-1957 Base, withdraw SEN30 02 39-42
SIS SEN 30 02 88-1959 Button film according to SEN 30 02 89
SIS SS 14 36 02-1990 SIS SS 14 36 02-1990
SIS SEN 30 02 31-1957 Base, wooden rod inserted SEN30 02 43-44
SIS SEN 30 02 37-1957 Crust put in, stick put in SEN30 02 43
SIS SS 14 02 21-1984 Grey iron — Hardness in the castings
SIS SS 14 21 02-1988 Pressure vessel steel — SS steel21 02
SIS SS 14 81 02-1986 Powder metallurgy - SS sintered steel 81 02
SIS SS 81 73 02-1985 Note: ss81 73 02, door...valid until January 1, 1986
SIS SS 14 32 02-1979 Welding electrodes — Covered electrodes 32 02 (ISO codification E 51 0)
SIS SEN 30 02 38-1957 Ship installation materials. Soil is put in and wooden sticks are put in SEN30 02 44

Association Francaise de Normalisation

NF A02-051:1994
NF L64-001-02*NF EN 4855-02:2020 Aerospace series - ECO efficiency of catering equipment - Part 02 : oven equipment
NF EN 4855-02:2020 Aerospace series - Eco-efficiency of catering equipment - Part 02: ovens

German Institute for Standardization

DIN 4261-1 E:2009-02 Small sewage treatment plants - Part 1: Plants for waste water pretreatment
DIN 4261-1 E:2025-02 Draft Document - Small sewage treatment plants - Part 1: Plants for waste water pretreatment
DIN 85003-6:2011-02
DIN 17024-1:2020-02
DIN 19752:2019-02 Hydropower plants - Planning, execution and operation
DIN 17024-3:2020-02
DIN EN 12681-2:2018-02
DIN EN ISO 5667-13:1998-02 Sampling of water - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997)
DIN 2000:2017-02 Central drinking water supply - Guidelines regarding requirements for drinking water, planning, construction, operation and maintenance of supply plants / Note: This standard is part of the DVGW body of rules.
DIN 45673-6 BEIBLATT 1:2013-02
DIN 86292 E:2025-02 Draft Document - Ships and marine technology - Waste water treatment plants - Methods of sampling
DIN EN 4855-02 E:2025-02 Draft Document - Aerospace series - ECO efficiency of catering equipment - Part 02: Oven equipment; English version prEN 4855-02:2024
DIN EN 12811-3 Berichtigung 1:2004-02 Corrigenda to DIN EN 12811-3:2003-02
DIN ISO 20816-5 E:2017-02 Mechanical vibration - Measurement and evaluation of machine vibration - Part 5: Machine sets in hydraulic power generating and pump-storage plants
DIN EN 16603-10-02:2018 Space engineering - Verification; English version FprEN 16603-10-02:2016
DIN EN 16603-10-02:2019 Space engineering - Verification; English version EN 16603-10-02:2018
DIN EN 4702-02:2017 Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 02: Spring clamp stud combination; German and English version EN 4702-02:2017
DIN EN 4855-02 E:2019 Draft Document - Aerospace series - ECO efficiency od catering equipment - Part 02: Oven equipment; German and English version FprEN 4855-02:2019
DIN EN 4855-02:2020 Aerospace series - ECO efficiency of catering equipment - Part 02: Oven equipment; German and English version EN 4855-02:2020
DIN 19569-9:2017-02 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 9: Mechanical drainage of sewage sludge / Note: Applies in conjunction with DIN EN 12255-1 (2002-04), DIN EN 12255-8 (2001-10).
DIN ISO 5667-5:2011-02 Water quality - Sampling - Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems (ISO 5667-5:2006)
DIN EN 16603-31-02:2018 Space engineering - Two-phase heat transport equipment; English version EN 16603-31-02:2018

Magyar Szabványügyi Testület

MSZ 02 102-1979 MI-02 102-79 Fire Protection of Computing Center

Association of German Mechanical Engineers

VDI 2870 Blatt 2 (2013-02-00)

American Welding Society (AWS)

WRC Volume 57 No. 01-02:2002 Progress Reports Volume 57 No. 01-02 2002
WRC Volume 49 No. 01-02:1994 Progress Reports Volume 49 No. 01-02 1994
WRC Volume 50 No. 01-02:1995 Progress Reports Volume 50 No. 01-02 1995
WRC Volume 42 No. 01-02:1987 Progress Reports Volume 42 No. 01-02 1987
WRC Volume 51 No. 01-02:1996 Progress Reports Volume 51 No. 01-02 1996
WRC Volume 64 No. 01-02:2009 Progress Reports Volume 64 No. 01-02 2009
WRC Volume 47 No. 01-02:1992 Progress Reports Volume 47 No. 01-02 1992
WRC Volume 41 No. 01-02:1986 Progress Reports Volume 41 No. 01-02 1986
WRC Volume 52 No. 01-02:1997 Progress Reports Volume 52 No. 01-02 1997
WRC Volume 54 No. 01-02:1999 Progress Reports Volume 54 No. 01-02 1999
WRC Volume 40 No. 01-02:1985 Progress Reports Volume 40 No. 01-02 1985
WRC Volume 60 No. 01-02:2005 Progress Reports Volume 60 No. 01-02 2005
WRC Volume 53 No. 01-02:1998 Progress Reports Volume 53 No. 01-02 1998
WRC Volume 39 No. 02:1984 Progress Reports Volume 39 No. 02 1984
WRC Volume 38 No. 02:1983 Progress Reports Volume 38 No. 02 1983
WRC Volume 55 No. 01-02:2000 Progress Reports Volume 55 No. 01-02 2000
WRC Volume 59 No. 01-02:2004 Progress Reports Volume 59 No. 01-02 2004
WRC Volume 43 No. 01-02:1988 Progress Reports Volume 43 No. 01-02 1988
WRC Volume 48 No. 01-02:1993 Progress Reports Volume 48 No. 01-02 1993
WRC Volume 46 No. 01-02:1991 Progress Reports Volume 46 No. 01-02 1991
WRC Volume 56 No. 01-02:2001 Progress Reports Volume 56 No. 01-02 2001
WRC Volume 36 No. 02:1981 Progress Reports Volume 36 No. 02 1981
WRC Volume 62 No. 01-02:2007 Progress Reports Volume 62 No. 01-02 2007
WRC Volume 45 No. 01-02:1990 Progress Reports Volume 45 No. 01-02 1990
WRC Volume 63 No. 01-02:2008 Progress Reports Volume 63 No. 01-02 2008
WRC Volume 58 No. 01-02:2003 Progress Reports Volume 58 No. 01-02 2003
WRC Volume 61 No. 01-02:2006 Progress Reports Volume 61 No. 01-02 2006
WRC Volume 37 No. 02:1982 Progress Reports Volume 37 No. 02 1982
WRC Volume 44 No. 02-03-04:1989 Progress Reports Volume 44 No. 02-03-04 1989

CZ-CSN

CSN 02 1174 Zc-1970 Czech National Standard 02 1174 Screws for steel
CSN 02 4385 Za-1981 Czech national standard 02 4381 flat steel cable 280; 336; 392 lines
CSN 02 3230 Za-1986 Czech national standard 02 3230. Welded chain bonding chain test, quality 24 (set in Czech national standard 02 3201)
CSN 02 4348 Za-1981 Czech standard 02 4348 six-strand steel rope 210. Specification
CSN 02 4381 Za-1981 Czech national standard 02 4381 flat steel cable 280, 336 392 lines
CSN 02 3311 Za-1987 Czech National Standard 02 3311 Roller Chain Specifications
CSN 02 1105 Zd-1986 Czech national standard 02 1105 precision screws, hexagonal head
CSN 02 4380 Za-1981 Czech national standard 02 4380 flat steel cable 168; 224; 336; 448 and 608 lines
CSN 02 4305 Za-1981 Czech National Standard 02 4305 Steel cables for electrical connections
CSN 02 4324 Za-1981 Czech national standard 02 4324 six-strand steel cable. Line 222. Specification
CSN 02 1700 Zb-1977 Revision b. Czech national standard 02 1700 gasket. Overview
CSN 02 4349 Za-1981 Czech national standard 02 4349 six-strand steel cable 210 wires. Specification
CSN 02 4346 Za-1981 Czech national standard 02 4346 six-strand steel cable 330 lines. Specification
CSN 02 4340 Za-1981 Czech national standard 02 4340 six-strand steel cable. Line 114. Specification
CSN 02 1303 Zd-1986 Czech national standard 02 1303 coarse screws, hexagonal head thread
CSN 02 3315 Za-1987 Czech national standard 02 3315 long roller chain spacing specifications
CSN 02 4350 Za-1981 Czech national standard 02 4350 six-strand steel cable. 186 lines. Specification
CSN 02 4363 Za-1981 Czech national standard 02 4363 six-strand steel cable. Line 144. Specification
CSN 02 4343 Za-1981 Czech national standard 02 4343 six-strand steel cable. Line 162. Specification
CSN 02 3235 Za-1986 Czech National Standard 02 3235 Welding Chain Acceptor Bonding Chain Test, Quality 24 Specifications and Technical Requirements (specified in Czech National Standard 02 3201)
CSN 02 4337 Za-1981 Czech national standard 02 4337 six-strand steel cable. 198 lines. Specification
CSN 02 4352 Za-1981 Czech national standard 02 4352 six-strand steel cable. Line 114. Specification
CSN 02 1101 Zd-1970 Czech national standard 02 1101 precision screws, hexagonal head
CSN 02 4370 Za-1981 Czech national standard 02 4370 multi-strand steel cable. 126 lines. Specification
CSN 02 4339 Za-1981 Czech national standard 02 4339 six-strand steel cable. 276 line specifications
CSN 02 4342 Za-1981 Czech national standard 02 4342 six-strand steel cable 162 lines. Specification
CSN 02 4336 Za-1981 Czech national standard 02 4336 six-strand steel cable, 186 wire specifications
CSN 02 4645 Za-1989 Czech national standard 02 4645 *Roller bearing. Single row ball bearing
CSN 02 1101 Zg-1986 Czech National Standard 02 1100 Precision screws with hexagonal head
CSN 02 4338 Za-1981 Czech national standard 02 4338 six strands of steel cable. Wire 216． Specification
CSN 02 6519 Za-1981 Czech national standard 02 6519 Electric brake sorting layered. Specification
CSN 02 4347 Za-1981 Czech national standard 02 4347 six-strand steel cable. 78 wire. Specification
CSN 02 4361 Za-1981 Czech national standard 02 4361 six-strand steel cable. 162 line stocks. Specification
CSN 02 4341 Za-1981 Czech national standard 02 4341 six-strand steel cable 114 wires (49 wires) specifications
CSN 02 4345 Za-1981 Czech national standard 02 4345 six-strand steel cable. 222 lines (49 lines) specifications
CSN 02 1669 Zb-1981 Revision b). Step 2 3 / 1981 Czech National Standard 02 1669 Suspension Nuts
CSN 02 4323 Zb-1981 Czech national standard 02 4323 six-strand steel cable. 114 lines (19 lines) specifications
CSN 02 4344 Za-1981 Czech national standard 02 4344 six-strand steel cable. Line 222. seal. Specification
CSN 02 4375 Za-1981 Czech national standard 02 4375 multi-strand steel cable. 420 and 630 lines. Specification
CSN 02 4683 Za-1984 Czech national standard 02 4683 rolling bearing. Cage and needle roller. Main specifications
CSN 02 4351 Za-1981 Czech national standard 02 4351 six-strand steel cable. Sealed 186 lines (49 lines) specifications
CSN 02 3321 Za-1987 Czech National Standard 02 3321 High Speed Running Bushing Chain Specifications
CSN 02 4362 Za-1981 Czech national standard 02 4362 six strands of steel cable and 252 strands. Specification
CSN 02 4355 Za-1981 Czech national standard 02 4355 six-strand steel cable. Composite wire 96. Specification
CSN 02 1104 Zd-1986 Czech national standard 02 1104 precision screws, hexagonal head with safety opening
CSN 02 1104 Zb-1970 Czech national standard 02 1104 precision screws, hexagonal head with safety opening

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE AC-02-6-1-2002 Degrading Chilled Water Plant Delta-T: Causes and Mitigation

International Electrotechnical Commission (IEC)

IECEx 02A-2011 Guidance for applicants seeking IECEx Certification under the IECEx certified equipment scheme, IECEx 02

US-3-A

3-A 57-02-2008 3-A Sanitary Standards for Disc-Type Valves, Number 57-02
3-A 02-10-2006 3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps, Number 02-10

Network Rail

NR/SMTH/PART 02 ISSUE 13-2023 Signal Maintenance Testing Handbook (SMTH): Part 02

ETSI - European Telecommunications Standards Institute

3GPP TS 29.198-02-2002 See TS 129 198-02 V5.1.1 (Version 5.1.1 Release 5)

Canadian Standards Association (CSA)

CSA ISO/IEC 8326-02-CAN/CSA:2002 Information technology - Open Systems Interconnection - Session service definition
CSA ISO/CEI 8326-02-CAN/CSA:2002 Information Technology - Open Systems Interconnection (OSI) - Session Service Definition ISO/IEC 8326: 1996; Amendment 1: 02/2002; Amendment 2: 02/2002

SCC

AFS GMDK02 Decatur Foundry Print

American Society for Testing and Materials (ASTM)

ASTM E1469-02 E 1469 02 Standard Practice for Collecting Benthic Macroinvertebrates with Multiplate Samplers