affect the temperature

affect the temperature, Total:201 items.

The international standard classification for "affect the temperature" includes: Linear and angular measurements in general , Metrology and measurement in general .

The Chinese standard classification for "affect the temperature" includes: Basic standards and general methods , Electrical insulating material and its products , Meteorology , Industrial automation and control device in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/Z 28820.4-2022 Long-term radiation ageing in polymers—Part 4: Effects of different temperatures and dose rates under radiation conditions
GB/T 39643-2020 Geometrical product specifications (GPS)—Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences

Taiwan Provincial Standard of the People's Republic of China

CNS 9831-1988 Surrounding Temperature Affect for Security Current of Wires Insulation

Professional Standard - Meteorology

QX/T 548-2020 Grade of solar cell temperature impact to generation efficiency

Professional Standard - Machinery

JB/T 9233.6-1999 General methods of testing the performance of industrial process measurement and control instruments Ambient temperature effect
JB/T 9233.7-1999 General methods of testing the performance of industrial process measurement and control instruments Transient temperature effect

未注明发布机构

FORD FLTM BI 164-01-2004 TEST FOR DETRIMENTAL EFFECTS DUE TO ABUSIVE WAXING METHODS

American Society for Testing and Materials (ASTM)

ASTM STP 858-1985 Effect of temperature on concrete
ASTM STP 12-1931 The influence of metal properties at different temperatures
ASTM STP 391-1965 Literature Survey on the Effect of Temperature on the Properties of Metals
ASTM STP 260-1959 Literature Survey on the Influence of Stress Concentrations at Elevated Temperatures and The Effects of Nonsteady Load and Temperature Conditions on the Creep of Metals
ASTM D1151-00(2022) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM F1596-00(2005) Standard Practice for Exposure of Membrane Switches to Temperature and Relative Humidity
ASTM F1596-00 Standard Practice for Exposure of Membrane Switches to Temperature and Relative Humidity
ASTM E2264-24 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
ASTM D4594-96(2003) Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D4594-96 Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM STP 1297-1997 Elevated Temperature Effects on Fatigue and Fracture
ASTM D4594/D4594M-96(2020) Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D4594/D4594M-96(2015)e1 Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D6207-03(2011) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D1151-00 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM E2264-23 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
ASTM D1151-00(2006) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM D1151-00(2013) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
ASTM STP 1025-1989 Factors That Affect the Precision of Mechanical Tests
ASTM STP 174-1956 Basic environmental effects on the strength, oxidation and embrittlement of high temperature metal materials

Polski Komitet Normalizacyjny (PKN)

PN C89065-1987 Plastics Determination of brittleness temperature by impact method
PN H04733-1972 Determination of electric resistance change factors of metals and alloys influenced by the temperature

British Standards Institution (BSI)

BS 2782-1:1956 Methods of testing plastics. Effect of temperature
BS ISO 4075:2025 Polysulfone (PSU). Effect of time and temperature on expected strength
BS ISO 4076:2025 Polyphenylsulfone (PPSU). Effect of time and temperature on expected strength
BS ISO 24033:2025 Polyethylene of raised temperature resistance (PE-RT) pipes. Effect of time and temperature on the expected strength
BS ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
24/30490365 DC BS ISO 4075. Polysulfone (PSU). Effect of time and temperature on expected strength
BS ISO 4070:2025 Polyvinylidene fluoride (PVDF). Effect of time and temperature on expected strength
04/30125959 DC ISO 24033. Pipes made of raised-temperature-resistance polyethylene (PE-RT). Effect of time and temperature on the expected strength
24/30486234 DC BS ISO 4076 Polyphenylsulphone (PPSU) - Effect of time and temperature on expected strength
BS PD ISO/TS 13471-2:2022 Acoustics. Temperature influence on tyre/road noise measurement-Correction for temperature when testing with the pass-by methods
07/30154523 DC BS ISO 24033. Polyethylene of raised-temperature- resistance (PE-RT). Pipes. Effect of time and temperature on the expected strength
24/30483744 DC BS ISO 24033 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
08/30190962 DC BS ISO 3213. Polypropylene (PP) pipes. Effect of time and temperature on expected strength
24/30490362 DC BS ISO 4070. Polyvinylidene fluoride (PVDF). Effect of time and temperature on expected strength
PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement. Correction for temperature when testing with the CPX method
BS PD ISO/TS 13471-1:2017 Acoustics. Temperature influence on tyre/road noise measurement-Correction for temperature when testing with the CPX method
BS ISO 8149:2025 Unplasticized polyamide (PA-U) pipes. Effect of time and temperature on the expected strength
BS 2782-1 METHOD 103 TO 104:1956 Methods of testing plastics Effect of temperature. Methods 103 and 104. Melting point, mechanical properties at low temperature
11/30242954 DC BS ISO 12230. Polybutene-1 (PB-1) pipes. Effect of time and temperature on the expected strength
PD ISO/TS 13471-2:2022 Acoustics — Temperature influence on tyre/road noise measurement Part 2: Correction for temperature when testing with the pass-by methods
BS 2782-1 METHOD 101 TO 102:1956 Methods of testing plastics Effect of temperature. Methods 101 and 102. Crushing strength after heating (heat resistance), deformation at elevated temperatures
24/30489307 DC BS ISO 8149 Unplasticized polyamide (PA-U) pipes - Effect of time and temperature on the expected strength

Czech Standards Institute (UNMZ)

CSN 64 0620-1983 Plastics. Determination of the brittleness temperature by impact
CSN 35 8234 Cast.9-1988 Fixed capacitors. Methods of determination of temperature dependence of capacitance
CSN 35 8071 Cast.4-1985 Resistors. Methods of determination of temperature dependance of resistance value

German Institute for Standardization

DIN V ENV 1991-2-5:1999-01 Eurocode 1: Thermal actions
DIN ISO/TS 13471-1:2022-01 Acoustics - Temperature influence on tyre/road noise measurement - Part 1: Correction for temperature when testing with the CPX method (ISO/TS 13471-1:2017)
DIN 7724 Beiblatt:1972 Simplified summary of the classification of polymer materials according to the effect of temperature on their mechanical behavior

American Welding Society (AWS)

WRC 510:2006 Analysis of the Effects of Temperature on Bolted Joints
WRC 443:1999 External Pressure: Effect Of Initial Imperfections And Temperature Limits

Standard Association of Australia （SAA）

AS 3768:1990/Amdt 1:1995 A guide to the effects of temperature on electrical equipment
AS 3768:1990 Guide to the effects of temperature on electrical equipment
AS K94.1:1960 Methods of testing plastics, Part 1: Effect of temperature
AS 4155.4:1993 Test methods for general access floors - Test for the effect of temperature

Welding Research Council

BULLETIN 510-2006 ANALYSIS OF THE EFFECTS OF TEMPERATURE ON BOLTED JOINTS
BULLETIN 443-1999 EXTERNAL PRESSURE: EFFECT OF INITIAL IMPERFECTIONS AND TEMPERATURE LIMITS

American Water Works Association (AWWA)

AWWA ACE92125 Effects of Temperature on Residual Aluminum in Treated Waters
AWWA WQTC53007 Effects of Temperature, Water Hardness, and Recirculation on Copper Corrosion
AWWA ACE54533 Effects of Cold Water Temperatures on Water Treatment Unit Processes
AWWA ACE63183 Assessing Temperature Influences on Slow Sand Filtration Treatment Performance
AWWA WQTC71393 The Impact of Temperature on Anaerobic Biological Perchlorate Treatment
AWWA WQTC60580 Microcystin Chlorination: Effects of Temperature and Source Water Quality
AWWA WQTC55091 Water Temperature as it Affects the Perception of Drinking Water Odorants
AWWA ACE99506 Impact of Temperature on Biofilter Performance and Microbial Community Structure
AWWA ACE54503 Affects of the Pump Depth on Water Quality
AWWA JAW17367 Journal AWWA — Effects of Ozone and Storage Temperature on Giardia Cysts
AWWA JAW64228 Journal AWWA — Effects of Media, Backwash, and Temperature on Full-Scale Biological Filtration
AWWA JAW28464 Journal AWWA — The Effects of Temperature on Turbulent Flocculation: Fluid Dynamics and Chemistry
AWWA QTC97145 The Effect of BOM and Temperature on Biological Filtration: An Integrated Comparison at Two Treatment Plants
AWWA JAW26182 Journal AWWA — Effect of Temperature and pH on the Toxicity of Monochloramine to the Asiatic Clam
AWWA WQTC60639 Salinity — Impacts on Reuse
AWWA WQTC56964 Assessment of the Effects of Holding Time and Temperature on E. coli Concentrations in Surface Water Samples
AWWA WQTC65894 Effect of TOC, TDS, Temperature, and Concentration on Henry's Law Constants of Geosmin and Trichloromethane
AWWA ACE95084 Chlorate Formation in Sodium Hypochlorite Stock Solutions: Effects of Time and Temperature
AWWA ACE90011 Effect of Temperature on GAC Adsorption in Batch Systems and Predictions For Pilot-Scale Systems
AWWA JAW10127 Journal AWWA — Determining Residual Chlorine: Effect of Temperature on the Titrametric Starch-Iodine End Point
AWWA ACE94155 The Effects of Temperature and Sulfate Ion on Flocculation Kinetics Using Fe(III) Coagulant
AWWA WQTC59006 Evaluation of Different Ozonation Strategies and of Temperature Effects on Biological Filter Performance
AWWA JAW10878 Journal AWWA — Temperature Effects on the Use of Metal-Ion Coagulants for Water Treatment
AWWA ACE58196 Effects of Empty Bed Contact Time and Temperature on the Removal of Haloacetic Acids Using Biologically Active Carbon

Engineering Sciences Data Unit (ESDU)

ESDU 69012 B-1973 Effects of kinetic heating on equilibrium temperature of flight vehicles.

Society of Automotive Engineers (SAE)

SAE AIR6411-2022 Effects of Extremely Cold Temperature on Landing Gear Operation
SAE AIR6411 Effects of Extremely Cold Temperature on Landing Gear Operation

Der Energieeffizienzverband für Wärme, Kälte und KWK e. V.(AGFW)

AGFW FW 443 H:2000-04 Impact of temperature and flow control on heating and hot water network operation costs

International Organization for Standardization (ISO)

ISO/CD 4075 Polysulfone (PSU) — Effect of time and temperature on expected strength
ISO 4075:2025 Polysulfone (PSU) — Effect of time and temperature on expected strength
ISO/TR 9492:1987 Bases for design of structures; Temperature climatic actions
ISO/CD 4076 Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength
ISO 4076:2025 Polyphenylsulfone (PPSU) — Effect of time and temperature on expected strength
ISO 24033:2006 Pipes made of raised-temperature-resistance polyethylene (PE-RT) - Effect of time and temperature on the expected strength
ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
ISO 24033:2025 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
ISO 12230:1996 Polybutene (PB) pipes - Effect of time and temperature on the expected strength
ISO 4070:2025 Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength
ISO 3213:1996 Polypropylene (PP) pipes - Effect of time and temperature on expected strength
ISO/CD 4070 Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength
ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
ISO 8149:2025 Unplasticized polyamide (PA-U) pipes — Effect of time and temperature on the expected strength
ISO 10146:1997 Crosslinked polyethylene(PE-X)pipes - Effect of time and temperature on the expected strength
ISO/TS 13471-1:2017 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method
ISO/TS 13471-2:2022 Acoustics — Temperature influence on tyre/road noise measurement — Part 2: Correction for temperature when testing with the pass-by methods

International Electrotechnical Commission (IEC)

IEC PAS 62161:2000 Steady state temperature humidity bias life test

American Petroleum Institute (API)

API Publ 1625-1978(1979) Analysis of Temperature Effects on Gasoline Marketing Operations
API PUBL 1625-1979 Analysis of Temperature Effects on Gasoline Marketing Operations
API PUBL 4542-1992 Temperature@ Reid Vapor Pressure and Gasohol Effects on Running Losses
API 4005-1968 THE EFFECT OF FUEL VOLATILITY VARIATIONS ON THE PERFORMANCE OF AUTOMOBILIES OVER A RANGE OF TEMPERATURES

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE DA-00-3-5-2000 Impact of Heating Systems and Wall Surface Temperatures on Room Operative Temperature Fields
ASHRAE 3763-1994 Predicting the Temperature@ Humidity@ Pressure@ and/or Density Effects on Velocity Instrumentation
ASHRAE 4167-1998 The Effects of Temperature@ Light@ and Sound on Perceived Work Environment
ASHRAE 4716-2004 Effect of Boundary Condition on the Prediction of Temperature Distribution for Curtain Walls
ASHRAE AB-10-017-2010 Combined Effects of Noise and Temperature on Human Comfort and Performance
ASHRAE 3643-1993 Limiting Solar Radiation Effects on Outdoor Air Temperature Measurement
ASHRAE MN-00-3-2-2000 Effect of Data Period-of-Record on Estimation of HVAC&R Design Temperatures
ASHRAE 3901-1995 Experimental Study of Temperature@ Pressure@ Humidity@ and/or Density Effects on Vane Anemometers
ASHRAE SF-98-20-4-1998 Impact of Velocity and Temperature Fluctuations on the Accuracy of Low-Velocity Measurements Indoors by Thermal Anemometers
ASHRAE 4431-2001 Effect of 1997 Handbook Summer Design Temperature Specifications on Enthalpy and Humidity Ratio
ASHRAE TO-98-12-5-1998 The Effects of Varying Indoor Air Temperature and Heat Gain on the Measurement of Retrofit Savings

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD22-A100-B-2000 Cycled Temperature-Humidity-Bias Life Test

GCC Standardization Organization

GSO ISO 24033:2013 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
GSO ISO 3213:2015 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength
GSO ISO 12230:2015 Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength
GSO ISO 10146:2013 Cross linked polyethylene (PE-X) pipes - Effect of time and temperature on the expected strength
GSO ISO/TS 13471-1:2023 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method

Belgian Standards Institute

NBN-ISO/TR 9492:1993 Bases for design of structures. Temperature climatic actions

Danish Standards Foundation

DANSK DS/ISO 4076:2025 Polyphenylsulfone (PPSU) – Effect of time and temperature on expected strength
DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
DANSK DS/ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
DANSK DS/ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
DS/ISO 12230:2012 Polybutene-1 (PB-1) pipes - Effect of time and temperature on the expected strength
DANSK DS/ISO/TS 13471-2:2022 Acoustics – Temperature influence on tyre/road noise measurement – Part 2: Correction for temperature when testing with the pass-by methods
DANSK DS/ISO/TS 13471-1:2017 Acoustics – Temperature influence on tyre/road noise measurement – Part 1: Correction for temperature when testing with the CPX method

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 3213:2015 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength
OS GSO ISO 24033:2013 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength
OS GSO ISO 12230:2015 Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength
OS GSO ISO 10146:2013 Cross linked polyethylene (PE-X) pipes - Effect of time and temperature on the expected strength

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 3213:2016 Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength
BH GSO ISO/TS 13471-1:2023 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method

Illuminating Engineering Society of North America

IESNA TM-6-1996 Understanding and Controlling the Effects of Temperature on Fluorescent Lamp Systems

National Association of Corrosion Engineers (NACE)

NACE Paper 00259-1997 Study on the Temperature Effect of Ultrasonic Wave in Steel
NACE Paper 14623-2020 Effect of Low Temperature Diffusion Heat Treatment on Corrosion Resistance of Nickel Alloy
NACE Paper 13330-2019 Effects of acid concentration and temperature on active corrosion rates of stainless steel and nickel-based materials
NACE Paper 03807-2014 Top of the Line Corrosion Behavior in Highly Sour Environments: Effect of the Gas/Steel Temperature
NACE Paper 07170-2007 Effect of Temperature and Chloride Concentration on Crevice Corrosion Resistance of Austenitic Stainless Steel
NACE Paper 07170-2016 Effect of Temperature and Chloride Concentration on Crevice Corrosion Resistance of Austenitic Stainless Steel
NACE Paper 11132-2018 Study on the influence of dissolved salt concentration on the performance of offshore coating systems
NACE Paper 08096-2008 Effect of impingement angle on the permeability of CRAs in high-speed multiphase flows
NACE Paper 14793-2020 Effects of Temperature and Critical Micelle Concentration (CMC) on the Inhibitory Properties of Tetraalkylammonium Preservatives

Korean Agency for Technology and Standards (KATS)

KS K 0757-2015 Test method for effects of temperature on stability of geotextiles
KS M ISO 10146-2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS M ISO 10146-2019(2024) Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS K 0758-2001 TESTING METHOD FOR EFFECTS OF TEMPERATURE STABILITY OF GEOSYNTHETICS
KS M ISO 10146:2019 Crosslinked polyethylene(PE-X) pipes — Effect of time and temperature on the expected strength
KS M ISO 10146:2004 Crosslinked polyethylene(PE-X) pipes－Effect of time and temperature of the expected strength
KS K 0757-2021 Standard test method for effects of temperature on stability of geotextiles
KS I ISO TS 13471-1-2023 Acoustics — Temperature influence on tyre/road noise measurement — Part 1: Correction for temperature when testing with the CPX method

American National Standards Institute （ANSI)

ANSI/TIA-455-71-A-1999 Procedure to Measure Temperature-Shock Effects on Fiber Optic Components
ANSI/EIA 364-70A:1998 Test Procedure for Current vs Temperature Rise of Electrical Connectors
ANSI/TIA/EIA 455-71-A-1999 Procedure to Measure Temperature-Shock Effects on Fiber Optic Components
ANSI/TIA/EIA 455-161-1996 Procedure for Measuring Temperature and Humidity Aging Effects on Mechanical Characteristics of Optical Fibers
ANSI/TIA-455-160-A-2003 Procedure for Measuring Temperature and Humidity Aging Effects on Optical Characteristics of Optical Fibers (SP-2821-A)
ANSI/TIA/EIA 455-73-1997 Procedure for Assessing Temperature and Humidity Cycling Exposure Effect on Mechanical Characteristics of Optical Fiber
ANSI/TIA/EIA 455-72-1997 Procedure for Assessing Temperature and Humidity Cycling Exposure Effect on Optical Characteristics of Optical Fiber
IT9.21-1996 Life Expectancy of Compact Discs (CD-Rom) - Method for Estimating@ Based on Effects of Temperature and Relative Humidity (IS&T)
ANSI/EIA/TIA 455-69A:1991 Test Procedure for Minimum and Maximum Exposure Temperature Evaluation of Optical Fibers

American Concrete Institute

ACI 209R-1992 Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures
ACI 209R-1992(2008) Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures

Finnish Standards Institute

SFS 3934-1978 Floor and wall coverings. Effect of temperature changes on length and pressure

(U.S.) Telecommunications Industries Association

EIA/TIA-455-71-1989 FOTP-71 Procedure to Measure Temperature-Shock Effects on Fiber Optic Components
TIA/EIA-455-71A-1999 FOTP-71 Procedure to Measure Temperature-Shock Effects on Fiber Optic Components
TIA/EIA-455-160-1996 FOTP-160 Procedure for Assessing Temperature and Humidity Exposure Effects on Optical Characteristics of Optical Fibers
TIA-455-72-1997(2013) FOTP- 72 Procedure for Assessing Temperature and Humidity Cycling Exposure Effects on Optical Characteristics of Optical Fibers
TIA-455-73-1997(2013) FOTP- 73 Procedure for Assessing Temperature and Humidity Cycling Exposure Effects on Mechanical Characteristics of Optical Fibers
TIA-455-73-1997 FOTP- 73 Procedure for Assessing Temperature and Humidity Cycling Exposure Effects on Mechanical Characteristics of Optical Fibers
TIA-455-72-1997 FOTP- 72 Procedure for Assessing Temperature and Humidity Cycling Exposure Effects on Optical Characteristics of Optical Fibers
TIA/EIA-455-73-1997 FOTP-73 Procedure for Assessing Temperature and Humidity Cycling Exposure Effects on Mechanical Characteristics of Optical Fibers
TIA/EIA-455-72-1997 FOTP-72 Procedure for Assessing Temperature and Humidity Cycling Exposure Effects on Optical Characteristics of Optical Fibers

Magyar Szabványügyi Testület

MSZ 9640/15-1980 Coatings and coating system testing. Effects of rapid temperature changes

Swedish Institute for Standards

SS-ISO 24033:2006 Pipes made of raised-temperature-resistance polyethylene (PE-RT) - Effect of time and temperature on the expected strength (ISO 24033:2006, IDT)
SIS SS-ISO 3248:1989 Paints and varnishes — Determination of the effect of heat
SS-ISO 24033:2009 Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength (ISO 24033:2009, IDT)
SS-ISO 3213:2009 Polypropylene (PP) pipes - Effect of time and temperature on expected strength (ISO 3213:2009, IDT)

Ente Nazionale Italiano di Unificazione

UNI ISO 4076:2025 Polyphenylsulfone (PPSU) - Effect of time and temperature on expected strength

Gosstandart of Russia

GOST R 57361-2016 Foundations of buildings. Calculation and design rules taking into account temperature influences
GOST 28224-1989 Basic environmental testing procedures. Part 2. Test Z/AD. Composite temperature and humidity cyclic test

National Standardisation Body (ASRO)

STAS 5118/14-1975 Packages DETERMINATION OF THE INFLUENCE OF HIGH AND LOW TEMPERATURES UPON PHYSICAL AND, MECHANICAL STRENGTHS
STAS SR ISO 3248:1993 Paints and varnishes - Determination of the effect of heat

Natural Gas Processor's Association (NGPA)

GPA RR-74-1984 Influence of Methanol on Hydrate Formation at Low Temperatures

Association for Electrical, Electronic & Information Technologies (VDE)

VDE 0468-2-14 E*DIN EN 60068-2-14:2008-02 Environmental testing – Part 2-14: Tests – Test N: Change of temperature

Bureau of Indian Standards

IS 16347-2015 Geosynthetics - Method of Test for Effects of Temperature on Stability of Geotextile

Association for Materials Protection and Performance (AMPP)

AMPP Paper 16943-2021 Corrosion of stainless steels in sulfuric acid environments: influence of chloride content and temperature

Association Francaise de Normalisation

NF X35-201:1994 Hot environments. Estimation of the heat stress on working man, based on the wbgt-index (wet bulb globe temperature).

National Aeronautics and Space Administration (NASA)

NASA NACA-TN-1637-1948 Effect of preignition on cylinder temperatures, pressures, power output, and piston failures