column unit

column unit, Total:170 items.

The international standard classification for "column unit" includes: Moulding equipment , Bolts, screws, studs , Industrial process measurement and control .

The Chinese standard classification for "column unit" includes: Coal mine special equipment , Mould , Lathe , Moulds , Combination grippers , Electronic components , Clamping fixtures , Technical management , Fastener , Flow capacity and material level instrument .

Professional Standard - Coal

MT 542-1996 Column Shoe of Monomer Supporting Post
MT/T 542-1996 Monolithic pillar shoes

Professional Standard - Machinery

JB/T 7652.2-1994 Die limit support device limit column
JB/T 9958.1-1999 Single column hydraulic press Types and basic parameters
JB/T 4116-1996 Single, double-column vertical lathe Accuracy inspection
JB/T 3665.1-1999 Single, double-column vertical lathe parameters
JB/T 9958.2-1999 Single column hydraulic press. Precision
JB/T 3665-1996 Specifications for single-column and double-column vertical lathes
JB/T 7652.2-2008 Limiting and supporting units of stamping dies-Part 2:Limit pillars

Professional Standard - Aviation

HB 7145.8-1995 Large Series Combined Clamp Locating Piece - Cylindrical Positioning Pin
HB 1733-1987 Small Through-hole Cylindrical Positioning Pin
HB 1739-1987 Countersink Cylindrical Positioning Pin
HB 4437-1990 Limited Posts
HB 1732-1987 Small Pillar Locating Pin
HB 377-1971 Fixed column positioning pin
HB 1735-1987 Small Blind Screw Hole Cylindrical Positioning Pin
HB 7026.2-1994 Interchangeable Parts and Locating Piece of Fixture - Cylinder Positioning Pin
HB 1737-1987 Through-hole Cylindrical Positioning Pin
HB 6191-1989 Single column assembly line bank
HB 376-1971 Small garden column positioning pin
HB 1736-1987 Cylindrical Positioning Pin
HB 378-1971 Column positioning pin
HB 382-1971 Cylindrical Locating Pins
HB 4064-1988 Single Lug Guide Pillar Seat
HB 1734-1987 Small Screw Hole Cylindrical Positioning Pin
HB 7026.3-1994 Interchangeable Parts and Locating Piece of Fixture - Large Cylindrical Positioning Pin
HB 430-1971 Support pillars for automatic positioning
HB 1675-1987 Pillar Localizer
HB 7026.1-1994 Interchangeable Parts and Locating Piece of Fixture - Small Cylindrical Positioning Pin

Taiwan Provincial Standard of the People's Republic of China

CNS 397-1978 Parallel Pins
CNS 8101-1981 Thrust Cylinderical Roller Bearings Single Direction
CNS 7186-1984 Addendum Modification of Cylindrical Gears

Professional Standard - Railway

TB 1546.3-1984 Cold stamping die limit device limit column

Professional Standard - Electron

SJ 3036.3-1988 Combined dies - Locating pillars
SJ 2648-1985 Cold press dies-Limited pillars
SJ 3037.2-1988 Combined dies - Locating pillars

Professional Standard - Aerospace

QJ 775.14-1983 Small-sized Combination Die - Positioning Column
QJ 2519.1-1993 Limiting column of cold stamping die limit support device

工业和信息化部

JB/T 14024-2021 Single column palletizer

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 829-1988 Slotted setscrews with dog point
GB/T 25477-2010 Anti-corrosion magnetic trurning column fluid level gauge
GB 3100～3102-93 Quantity and unit
GB/T 902.2-2010 Threaded studs for drawn arc stud welding with ceramic ferrule
GB/T 830-1988 Slotted cheese head screws with shoulder

未注明发布机构

DIN 1301-3 E:2017-01 Units - Part 3: Conversion of non-SI units
DIN 69881-1 Tool holders with prism; prism, prism location; technical delivery conditions
DIN 1301-1 Beiblatt 1:1982 Units; names and symbols analogous to units

National Metrological Verification Regulations of the People's Republic of China

JJG(铁道) 199-2009 Rules for measuring guide post position of bogie

German Institute for Standardization

DIN 635-1:1987 Rolling bearings; single-row self-aligning roller bearings
DIN 1301-1:2010 Units - Part 1: Unit names, unit symbols
DIN 1301-1:2010-10 Units - Part 1: Unit names, unit symbols
DIN 1301-1:2002 Units - Part 1: Unit names, unit symbols
DIN 1301-3:1979 Units; Conversions of Units No Longer to be Used
DIN 1301-1 Bb.1:1982 Units; names and symbols analogous to units
DIN 1301-3:2018-02 Units - Part 3: Conversion of non-SI units
DIN 1301-1 Beiblatt 1:1982-04 Units; names and symbols analogous to units
DIN 69881-1:1987 Tool holders with prism; prism, prism location; technical delivery conditions
DIN ISO 10889-1:2006-01 Tool holders with cylindrical shank - Part 1: Cylindrical shank, location bore; Technical delivery conditions (ISO 10889-1:2004)
DIN EN 17625:2021-01 Roof-top units; German and English version prEN 17625:2020 / Note: Date of issue 2020-12-11
DIN EN 17625:2021 Roof-top units; German and English version prEN 17625:2020

HU-MSZT

MNOSZ 1572-1953 Unit determination and number of groups of cylindrical wires
MSZ 14 518-1976 Cylindrical drill pipe check valve

American Society for Testing and Materials (ASTM)

ASTM C1552-16 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
ASTM C1552-08a Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
ASTM C1552-09 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
ASTM C1552-08 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
ASTM F468M-06e1 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]

Defense Logistics Agency

DLA A-A-55598 B-2007 BEARINGS, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, TWO ROLLER RETAINING RIBS ON INNER RING, ONE ROLLER RETAINING RIB ON OUTER RING, ONE DIRECTION LOCATING
DLA A-A-55602 B-2007 BEARINGS, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, TWO ROLLER RETAINING RIBS ON INNER RING, CYLINDRICAL OUTER RING, NON-LOCATING
DLA A-A-55601 B VALID NOTICE 1-2012 BEARINGS, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, CYLINDRICAL INNER RING, TWO ROLLER RETAINING RIBS ON OUTER RING, NON - LOCATING
DLA A-A-59287 A VALID NOTICE 1-2009 Terminal, Stud Feedthru,Single
DLA A-A-55598 B VALID NOTICE 1-2012 Bearings, Roller, Cylindrical, Single Row of Rollers, Two Roller Retaining Ribs on Inner Ring, One Roller Retaining Rib on Outer Ring, One Direction Locating
DLA MS52143 VALID NOTICE 1-1986 BEARING, ROLLER, NEEDLE: THICK OUTER RING W/ROLLERS, CAGE AND SEALS
DLA MS52143-1980 BEARING, ROLLER, NEEDLE: THICK OUTER RING W/ROLLERS, CAGE AND SEALS
DLA A-A-59288 A VALID NOTICE 1-2009 Terminal, Stud, Feedthru, Single-Double

United States Navy

NAVY MS19075 NOTICE 1-1998 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, CYLINDRICAL INNER RING, TWO ROLLER RETAINING RIBS ON OUTER RING, ONE DIRECTION LOCATING
NAVY MS19075-1959 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, CYLINDRICAL INNER RING, TWO ROLLER RETAINING RIBS ON OUTER RING, ONE DIRECTION LOCATING
NAVY MS19077 NOTICE 1-1998 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, TWO ROLLER RETAINING RIBS ON INNER RING, ONE ROLLER RETAINING RIB ON OUTER RING, ONE DIRECTION LOCATING
NAVY MS19078 NOTICE 1-1998 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, ONE ROLLER RETAINING RIB ON INNER RING, TWO ROLLER RETAINING RIBS ON OUTER RING, ONE DIRECTION LOCATING
NAVY MS19077-1959 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, TWO ROLLER RETAINING RIBS ON INNER RING, ONE ROLLER RETAINING RIB ON OUTER RING, ONE DIRECTION LOCATING
NAVY MS19078-1959 BEARING, ROLLER, CYLINDRICAL, SINGLE ROW OF ROLLERS, ONE ROLLER RETAINING RIB ON INNER RING, TWO ROLLER RETAINING RIBS ON OUTER RING, ONE DIRECTION LOCATING

SE-SIS

SIS 01 61 32-1971 Quantities and units. Base units, derived units, additional units
SIS SS 01 61 32-1985 Quantities and units - Sl-units and additional units
SIS SS 01 61 26-1991 Quantities and units — Prefixes for multiple units
SIS SS 401 01 13-1980 Quantities and units — Logarithmic quantities and units
SIS 01 61 26-1971 Quantities and units. Prefixes for multiple units

AT-ON

ONORM A 6432-1986 International System of Units (SI); SI units, decimal multiples and sub-multiples of SI units, units outside the SI
ONORM A 6431-1986 Systems of quantities, systems of units; basic quantities, basic measures
OENORM EN 17625-2021 Roof-top units

RO-ASRO

STAS 4612-1968 Quality unit. Cylindrical weights made of cast iron. Manufacturing Level 5
STAS 737/8-1984 International Svstem of Units (SI) UNITS OF MECHANICS
STAS 737/10-1987 International System of Units (SI) UNITS CHARACTERISTIC OF HEAT QUANTITIES
STAS 737/12-1987 International System of Units (SI) UNITS CHARACTERISTIC OF ACOUSTICS
STAS 737/6-1983 International System of Units (SI) UNITS OF SPACE AND TIME
STAS 737/1-1991 International system of units (si). Base and supplementary units
STAS 737/16-1984 International System of Units (SI) UNITS OF SOLID STATE PHYSICS
STAS 737/9-1983 International System of Units (SI) UNITS OF ELECTRICITY AND MAGNETISM
STAS 9446-1985 USING OF MEASURE LEGAL UNITS OUTSIDE THE INTERNATIONAL SYSTEM OF UNITS

BE-NBN

NBN E 27-324-1987 Quenched cylindrical pin or positioning cylindrical pin

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 260.1-2004 Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE 260.1-1993 Letter symbols for units of measurement (SI units, customary inch-pound units, and certain other units)
IEEE 260-1978 IEEE Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE P260.1/D21, November 2023 IEEE Draft Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE P260.1/D20, May 2023 IEEE Draft Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE P260.1/D18, August 2022 IEEE Draft Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE P260.1/D19, February 2023 IEEE Draft Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
P260.1/D19, February 2023 IEEE Draft Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE P260.1 IEEE Draft Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
ANSI/IEEE Std 260.1-1993 American National Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE Std 260.1-2004 IEEE Standard Letter Symbols for Units of Measurement (SI Customary Inch-Pound Units, and Certain Other Units)

SCC

AS Z46:1967 The international system (SI) units
DIN 1301-1/A1 E:2023 Draft Document - Units - Part 1: Unit names, unit symbols - Amendment 1
DIN 1301-3 E:2017 Draft Document - Units - Conversion of non-SI units
AS 1000:1970 The International System (SI) units and their application
AS R22:1957 Dispensing measures for pharmaceutical purposes (imperial units)
DIN 1301-3:2018 Units - Part 3: Conversion of non-SI units
DIN 1301-1 Supplement 1:1982 Units; names and symbols analogous to units
AENOR UNE 5012:1953 EQUIVALENCE BETWEEN UNITS OF QUANTITY OF HEAT AND ENERGY
BS ISO 10889-1:1997 Tool holders with cylindrical shank-Cylindrical shank, location bore. Technical delivery conditions
AS 2900.7:1986 Quantities, units, and symbols - Quantities and units of acoustics
BS 1244-1:1956 Metal sinks for domestic purposes-Imperial units with metric equivalents
AS 2900.3:1986 Quantities, units, and symbols - Quantities and units of mechanics
AS 2900.4:1986 Quantities, units, and symbols - Quantities and units of heat
AS 2900.5:1986 Quantities, units, and symbols - Quantities and units of electricity and magnetism

Danish Standards Foundation

DS/EN 28 734:1992 Parallel pins, hardened (Dowel pins

American National Standards Institute （ANSI)

ANSI/IEEE Std260.1:1993 American National Standard Letter Symbols for Units of Measurement ( SI Units, Customary Inch-Pound Units, and Certain Other Units)
ANSI/IEEE 260.1:2004 Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)

GSO

OS GSO 1:1990 The international system of units Part 1: Quantities and base,supplementary and derived units.
GSO 1:1990 The international system of units Part 1: Quantities and base,supplementary and derived units.
OS GSO ISO 8017:2015 Tools for moulding -- Guide pillars, straight and shouldered, and locating guide pillars, shouldered

Korean Agency for Technology and Standards (KATS)

KS B ISO 8017:2018 Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered
KS B ISO 8734-2010(2020) Dowel pins(parallel pins, hardened)
KS P 8414-2007(2017) Wrist units
KS P 7447-2007 Dental units
KS A 0105-1995(2001) LOGAL UNITS AND THE USE OF THEIR MULTIPLES AND OF CERTAIN OTHER UNITS

CL-INN

INDITECNOR 2.4-13ch-1948 Pressure units and intensity units
INDITECNOR 2.4-14ch-1948 Energy units and power units
INDITECNOR 2.4-6ch-1946 basic unit

KR-KS

KS B ISO 8017-2018 Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered
KS B ISO 8017-2023 Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered
KS B 6377-2009(2024) Fancoil units

FI-SFS

SFS-ISO 8017:1986 In case of interpretation disputes the English text applies
SFS B.5.67-1952 Set screw, cylindrical tip

International Organization for Standardization (ISO)

ISO 1000:1992 SI units and recommendations for the use of their multiples and of certain other units
ISO 8017:1985 Mould guide pillars, straight and shouldered, and locating guide pillars, shouldered
ISO 8734:1987 Parallel pins; Hardened (Dowel pins)
ISO 8017:2007 Tools for moulding - Guide pillars, straight and shouldered, and locating guide pillars, shouldered
ISO 1000:1992/Amd 1:1998 SI units and recommendations for the use of their multiples and of certain other units; Amendment 1
ISO 11197:2019 Medical supply units

IX-SA

AS 1012 Pt.16:1974 Test Methods Specific Method for Determination of Concrete Cylindrical Creep in Metric Compression Units

YU-JUS

JUS A.A1.025-1980 Quantities, unitsand symbols. Quantities and units of mechanics
JUS A.A1.026-1980 Quantities, units and symbols. Quantities and units of heat

IN-BIS

IS 5096-1969 Dimensions of round locating studs
IS 5097-1969 Diamond Positioning Stud Dimensions

Association Francaise de Normalisation

NF L31-227:1973 Airframe bearings, single row. Self aligning roller bearings. Corrosion-resisting steel. Dimensions and loads.
NF Q60-002:1975 Unités typographiques