denatured and non-transformed

denatured and non-transformed, Total:288 items.

The international standard classification for "denatured and non-transformed" includes: Spinning, twisting and texturing machines , Textile fabrics , Steels with special magnetic properties , Footwear , Rubber , Plastics , Construction technology , Power stations in general , Integrated circuits. Microelectronics , Elements of buildings in general , Seismic and vibration protection .

The Chinese standard classification for "denatured and non-transformed" includes: Chemical fiber machinery and instrument , Basic standards and general methods , Precision alloy , Footgear , Other special alloys , Rubber products in general , Basic standards and general methods for synthetic resin and plastic , Building construction and decoration engineering , Electric power testing technique , Semiconductor integrated circuit , Engineering seismic resistance .

Taiwan Provincial Standard of the People's Republic of China

CNS 6804-1980 Non - Linear, Symmetrical Varistors

Chongqing Provincial Standard of the People's Republic of China

DB50/T 1298-2022 Dual Real-Time PCR Detection Method of Proteus mirabilis and Proteus vulgaris

Professional Standard - Textile

FZ/T 96023-2012 False-Twist Texturing Machine
FZ/T 96023-2021 False-twist texturing machine
FZ/T 01113-2012 Test method of fabric shear property at low levels of deformation
FZ/T 96023-2001 False-twist texturing machine

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 42279-2022 Rubber,vulcanized or thermoplastic—Determination of tension set under constant elongation,and of tension set,elongation and creep under constant tensile load
GB/T 14991-1994 Deformable permanent-magnet steels
GB/T 1683-2018 Rubber,vulcanized—Determination of compression set at constant strain
GB/T 1634-1979 Test method of heat deflection temperature underbending load for plastics
GB/T 15227-1994 Test method of deformantion under wind pressure for building curtain walls
GB/T 14991-2016 Deformable permanent-magnet steels
GB/T 3903.40-2008 Footwear - Test methods for uppers - Deformability

Professional Standard - Geology

DZ/T 0276.27-2015 Regulation for testing the physical and mechanical properties of rock.Part 27:Test for determining the deformation of rock mass (Borehole deformation method)

Professional Standard - Energy and Power Planning

DL/T 1952-2018 Calibration specification of power transformers winding deformation tester
DL/T 911-2004 Frequency Response Analysis on Winding Deformation of Power Transformers
DL/T 911-2016 Frequency Response Analysis on Winding Deformation of Power Transformation
DL/T 1951-2018 General technical specification for winding deformation tester of power transformers

Professional Standard - Chemical Industry

HGB 4050-1960 Zero deformation test
HG/T 4806-2015 HG/T 4806-2015.Rubber shoes-Test methods for outsoles- Compression set

Group Standards of the People's Republic of China

T/CIE 155-2023 Measuring methods of electrical properties for non-volatile phase change memory
T/QGCML 3943-2024 Anti-deformation elevator sill

Professional Standard - Construction Industry

JG/T 372-2012 Building expansion joint cover systems

Professional Standard - Earthquake

DB/T 54-2013 The method of earthquake-related crustal deformation monitoring. Strain monitoring in borehole

Swedish Institute for Standards

SIS SEN 01 25 04-1964 Graphical symbols Variability, linearity and non-linearity
SIS SS 16 22 04-1986 Rubber and thermoplastic elastomer - Determination of compression set
SS 882470:1978 Protective footwear - Deformation and penetrationresistance - Test methods
SS-EN 13513:2002 Footwear - Test methods for uppers - Deformability
SIS SEN 01 25 36-1965 Graphical symbols Transformers
SIS SS 22 44 51-1983 Hollow glass block - Distortion
SS-ISO 2285:2007 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2007, IDT)
SS-EN 26891:1991 Träkonstruktioner - Mekaniska förband - Bestämning av hållfasthet och deformation
SS 882460:1978 Protective footwear - Deformation and penetrationresistance - Requirements
SIS SS 11 23 17-1984 Aluminium - Wire - Non-interrupted creep testing

Spanish Association for Standardization (UNE)

AENOR UNE-EN 14621:2007 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
UNE-EN 14621:2007 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
AENOR UNE 53511:2001 Elastomers. Determination of the remaining deformation due to compression at constant deformation at ambient, high or low temperatures.
UNE-ISO 2285:2009 Rubber, vulcanised or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
UNE-EN 13184:2001 NON DESTRUCTIVE TESTING - LEAK TESTING - PRESSURE CHANGE METHOD.

Danish Standards Foundation

DS/EN 14621:2006 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
DANSK DS/EN 14621:2005 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
DANSK DS/EN ISO 13015:2013 Woven fabrics - Distortion - Determination of skew and bow
DS/EN ISO 17695:2005 Footwear - Test methods for uppers - Deformability
DS/EN ISO 13015:2013 Woven fabrics - Distortion - Determination of skew and bow

German Institute for Standardization

DIN EN 14621:2006-03 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns; German version EN 14621:2005
DIN EN 14621:2006 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns; English version of DIN EN 14621:2006-03
DIN 53517:1987 Testing of rubber and elastomers; determination of compression set after constant strain
DIN 17750:2021-05 Strips and sheets of wrought nickel and nickel alloys - Properties
DIN 53572:1965 Determination of soft elastic foam plastics: Compression set test after constant deformation
DIN 1729-1:1963 Wrought magnesium alloys
DIN 1729-1:1982-08 Wrought magnesium alloys
DIN 53517-2:1972 Testing of Elastomers; determination of residual stress under constant deflection at low temperatures
DIN EN ISO 13015:2013-12 Woven fabrics - Distortion - Determination of skew and bow (ISO 13015:2013); German version EN ISO 13015:2013
DIN ISO 2285:2003 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2001)
DIN 60900-5:1988-07 Yarns; textured filament yarns; processes and terms
DIN ISO 2285:2022 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
DIN 7795:2015-02 Measuring compression set of elastomers in hot water
DIN 55436-2:1990 Packaging test; tubes made of aluminium; determination of the deformability of the tube body
DIN 7795:2015 Measuring compression set of elastomers in hot water
DIN 7795:2021 Measuring compression set of elastomers in hot water
DIN 53859-4:1977 Testing of textiles; tear growth test on textile fabrics, nonwoven textiles

Lithuanian Standards Office

LST EN 14621-2006 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns

Standards Norway

NS-EN 14621:2005 Textiles — Multifilament yarns — Methods of test for textured or non-textured filament yarns
NS 3552-1976 Method for testing deformation of flexible sewers
NS-EN 13513:2001 Footwear — Test methods for uppers — Deformability
NS 3552:1976 Method for testing deformation of flexible sewers

Gosstandart of Russia

GOST 24329-1980 Modificated wood. Modification methods
GOST 8733-1987 Seamless cold and warm deformed tubes. Technical requirements
GOST 13338-1986 Modified wood. Method for determination of hardness,temporal elastic deformation and residual strain
GOST 12057-1981 Paper and board. Methods for determination of linear deformation
GOST 9955-1962 Board. Method for the determination of plastic deformation
GOST 8733-1974 Seamless cold and warm deformed pipes. Specifications
GOST 18296-1972 Surface working. Terms and definitions
GOST 4784-1997 Aluminium and wrought aluminium alloys. Grades
GOST 4784-2019 Aluminium and wrought aluminium alloys. Grades
GOST 4784-1974 Wrought aluminium and aluminium alloys. Grades
GOST 20276-1985 Soils. Field methods for determining deformation characteristics
GOST 14957-1976 Strained magnesium alloys. Grades
GOST 19882-1991 Frame furniture. Methods of stability, strength and deformability tests
GOST 12248.7-2020 Soils. Determination of the characteristics of strength and deformability of frozen soils by the method of ball stamping
GOST 12248.10-2020 Soils. Determination of strain deformation parameters of frozen soils by compression testing

European Committee for Standardization (CEN)

EN 14621:2005 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
EN 13513:2001 Footwear - Test Methods for Uppers - Deformability

British Standards Institution (BSI)

BS EN 14621:2005 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
BS EN 14608:2004 Windows - Determination of resistance to racking
BS DD 86-2:1984 Damp-proof courses - Method of test for creep deformation
BS EN 13513:2002(2004) Footwear - Test methods for uppers - Deformability
BS EN 13513:2002 Footwear - Test methods for uppers - Deformability
12/30243764 DC BS ISO 2285. Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
DD 86-2-1984 Damp-proof courses. Method of test for creep deformation
BS EN ISO 10656:2021 Resistance welding equipment. Transformers. Integrated transformers for welding guns
BS EN ISO 9340:1999 Optics and optical instruments — Contact lenses — Determination ofstrains for rigid contact lenses
BS ISO 2285:2007 Rubber, vulcanized or thermoplastic. Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

Ente Nazionale Italiano di Unificazione

UNI EN 14621:2007 Textiles - Multifilament yarns - Methods of test for textured or non- textured filament yarns
UNI ISO 2285:2006 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
UNI ISO 2285:2019 Rubber, vulcanized or thermoplastic -- Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
UNI ISO 2285:2013 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
UNI ISO 2285:2008 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
UNI 3259-1952 Wood test. Static tangential deformation and static radial deformation tests
UNI 5610:1965 Elastomers: tests of vulcanized rubber and rubber-like materials. Compressive deformation under load, recovery and compression set.
UNI 3262-1952 Wood test. Deformation elastic coefficient measurement
UNI 6133-1972 Destructive testing of concrete. Deformation test
UNI 3219-1952 Metal material testing. Static deformation tests on materials with limited deformation
UNI EN 13184:2004 Non-destructive testing - Leak testing - Pressure change method
UNI 3746-1958 Wood fiber panel testing. Determination of elasticity and deformation* coefficients
UNI 2033-1942 Mechanical testing of elastic rubber. Permanent deformation test

Association Francaise de Normalisation

NF G07-300*NF EN 14621:2006 Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns
NF EN ISO 24344:2012 Resilient floor coverings – Determination of flexibility and deformation
NF ISO 20163:2019 Vulcanized or thermoplastic rubber - Determination of the set deformation under constant elongation and the set set, elongation and creep under constant tensile load
NF ISO 2285:2019 Vulcanized or thermoplastic rubber - Determination of the set deformation under constant elongation and the set set, elongation and creep under constant tensile load
NF T43-100*NF ISO 20163:2019 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
NF M11-005:1948 SOLID FUELS. DETERIORATION AND AGEING CHARACTERISTICS.
NF T46-009*NF ISO 2285:2019 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
NF G62-103*NF EN ISO 17695:2005 Footwear - Test methods for uppers - Deformability
NF G35-048:1995 Textile floor coverings. Tiles. Determination of dimensional changes due to the effects of varied water and heat conditions and distorsion out of plane.
NF G07-305:1982 Textiles. Tests on textured yarns. Determination of certain characteristics of crimp.

Czech Standards Institute (UNMZ)

CSN 72 2349-1983 Determination of elastic deformatton
CSN 42 0343-1972 Flexure elasticity test tased on the determination of plastic deformation
CSN 35 8138-1977 Variable non-wirewound resistors
CSN 63 5215-1985 Determination of defoimation of out- side diameter
CSN 42 0385-1981 Metal testing. Test of susceptibility of steel to ageing after cold plastic deformation
CSN 50 0420-1978 Determination of the compressibility of páper (constant deformation velocity)

American Association of State Highway and Transportation Officials

DIVISION I 8.25-1996 Development of Deformed Bars and Deformed Wire in Tension

Society of Automotive Engineers (SAE)

SAE MA4360A-2013 Metric Wrenches: 6 and 12 Point Flart Nut, Non-distorting
SAE AMS3307C-1991 Rubber, Silicone (VMQ) Low Compression Set, Non-Oil-Resistant, 65-75
SAE AS4167B-2011 Wrenches; Flare Nut, Crowfoot, 12 Point Non-distorting
SAE AS4167C-2016 Wrenches; Flare Nut, Crowfoot, 12 Point Non-distorting
SAE J224_198003 Collision Deformation Classification
SAE J1301_200308 Truck Deformation Classification
SAE J224-2022 Automotive Starter Drive Remanufacturing Procedures
SAE J1301-2003 Truck Deformation Classification
SAE J224-1980 Collision Deformation Classification
SAE J1301-2009 Truck Deformation Classification
SAE J224_201105 Collision Deformation Classification
SAE J1301_202206 Truck Deformation Classification
SAE J224-2017 COLLISION DEFORMATION CLASSIFICATION
SAE J224-1971 COLLISION DAMAGE CLASSIFICATION
SAE J224_197101 Collision Deformation Classification
SAE J224_202205 Collision Deformation Classification
SAE J224-2011 Collision Deformation Classification
SAE J1301_199408 Truck Deformation Classification
SAE J224A_197202 Collision Deformation Classification
SAE J1301-1994 Truck Deformation Classification
SAE J224_201702 Collision Deformation Classification
SAE J1301_200906 Truck Deformation Classification
SAE J1301-2022 Truck Deformation Classification
SAE J1301-2017 Truck Deformation Classification
SAE AS102A-1994 Fitting@ Cross@ Reducer@ Flareless and Short Flareless
SAE J224A-1972 COLLISION DEFORMATION CLASSIFICATION
SAE J1301_201702 Truck Deformation Classification
SAE AS102B-2011 Fitting, Cross, Reducer, Flareless and Short Flareless
SAE AS102C-2017 FITTING@ CROSS@ REDUCER@ FLARELESS AND SHORT FLARELESS
SAE AMS3307E-2021 Elastomer: Rubber, Silicone (VMQ) Non-Oil-Resistant Low Compression Set 65 - 75 Shore A Hardness
SAE AMS7268C-1994 Rings, Sealing, Silicone Rubber Low Compression Set, Non-Oil Resistant 65 - 75
SAE AMS3307E Elastomer: Rubber, Silicone (VMQ), Non-Oil-Resistant, Low Compression Set, 65 - 75 Shore A Hardness
SAE J863_201504 Methods for Determining Plastic Deformation in Sheet Metal Stampings
SAE J863A-1966 METHODS OF DETERMINING PLASTIC DEFORMATION IN SHEET STEEL STAMPINGS
SAE J863_198112 Methods for Determining Plastic Deformation in Sheet Metal Stampings
SAE J1636-2017 Recommended Guidelines for Load/Deformation Testing of Elastomeric Components
SAE J863A_196608 Methods for Determining Plastic Deformation in Sheet Metal Stampings
SAE J1636-1993 Recommended Guidelines for Load/Deformation Testing of Elastomeric Components
SAE J863-1981 Methods of Determining Plastic Deformation in Sheet Metal Stampings
SAE J863_198606 Methods for Determining Plastic Deformation in Sheet Metal Stampings

American Society of Mechanical Engineers (ASME)

ASME STP-NU-039-2011 CREEP AND CREEP-FATIGUE CRACK GROWTH AT STRUCTURAL DISCONTINUITIES AND WELDS

American Society for Testing and Materials (ASTM)

ASTM STP 637-1977 Cyclic stress-strain and plastic deformation in fatigue crack growth
ASTM D6774-22 Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
ASTM F3248-17(2024) Standard Test Method for Determining Vertical Deformation and Area Deflection of Area Elastic, Point Elastic, Combined Elastic and Mixed Elastic Sport and Dance Surfaces
ASTM F3248-17 Standard Test Method for Determining Vertical Deformation and Area Deflection of Area Elastic, Point Elastic, Combined Elastic and Mixed Elastic Sport and Dance Surfaces
ASTM E1319-98(2003) Standard Guide for High-Temperature Static Strain Measurement
ASTM D4403-84(2000)e1 Standard Practice for Extensometers Used in Rock
ASTM D4403-84(2005) Standard Practice for Extensometers Used in Rock
ASTM D8491-25 Standard Test Method for Recovered Carbon Black—Rheological Non-Linearity of a Rubber Compound by Fourier Transform Rheology
ASTM E1319-98 Standard Guide for High-Temperature Static Strain Measurement
ASTM D8491-22 Standard Test Method for Recovered Carbon Black—Rheological Non-Linearity of a Rubber Compound by Fourier Transform Rheology
ASTM F1304-18(2024) Standard Test Method for Deflection of Resilient Floor Tile
ASTM D8491-23 Standard Test Method for Recovered Carbon Black—Rheological Non-Linearity of a Rubber Compound by Fourier Transform Rheology
ASTM A1035/A1035M-09 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
ASTM A1035/A1035M-13a Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
ASTM A1035/A1035M-13 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
ASTM STP 1280-1997 Multiaxial fatigue and deformation testing techniques
ASTM D3106-07(2012) Standard Test Method for Permanent Deformation of Elastomeric Yarns
ASTM A1022/A1022M-14 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

Magyar Szabványügyi Testület

MSZ 11459/12-1979 TV protection device detection. Picture channel sign joint and non-linear deformation
MSZ 5745-1984 Added deformed steel and its firing
MSZ KGST 553-1977 Main dimensions of D-shaped deformation equipment

Engineering Sciences Data Unit (ESDU)

ESDU 90026 B-1994 Inelastic bending moments@ end loads@ stresses and strains for beam sections of general polygonal shape.
ESDU 78043 A-1979 Single disc springs - elastic deflections@ stresses@ stiffnesses and resiliences.
ESDU 94033-1994 Flat rectangular isotropic plates under uniformly distributed normal pressure. Elastic deflections@ stresses and strains@ moments and forces@ for various forms of edge restraint.
ESDU 78001 A-2007 The momentum-change component of pressure change in two-phase flow and other non-equilibrium effects.
ESDU 82008 B-1991 Elastic stresses and deflections of helical compression and tension springs of round wire.

GM Daewoo

GMKOREA EDS-T-2233-2010 Deformation Test of Rear Axle Transmissions
GMKOREA EDS-T-2214-2006 TRANSMISSION DEFORMATION

Japanese Industrial Standards Committee (JISC)

JIS K 6273:2006 Rubber, vulcanized or thermoplastic -- Determination of tension set, elongation and creep
JIS K 6273:2018 Rubber, vulcanized or thermoplastic -- Determination of tension set, elongation and creep
JIS K 6254:1993 Testing methods of stress-strain properties at low deformation for vulcanized rubber
JIS K 6254:2003 Rubber, vulcanized or thermoplastic -- Determination of stress-strain properties at low deformation

Korean Agency for Technology and Standards (KATS)

KS M 6785-2017(2022) Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS M 6785-2022 Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS M 6785-1994 Testing methods of stress-strain properties at low deformation for vulcanized rubber
KS M 6785-1999 Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS M 6785-2017 Testing methods of stressstrain properties at low deformation for vulcanized rubber
KS K ISO 24344:2010 Resilient floor coverings－Determination of flexibility and deflection
KS M ISO 17695:2005 Footwear－Test methods for uppers－Deformability
KS M ISO 17695-2005(2020) Footwear－Test methods for uppers－Deformability
KS J 0008-2007 Biotechnology－Guidance for the characterization of the genetically modified organism by analysis of the genomic modificationmodified organism by analysis of the genomic modification
KS B ISO 10113-2004(2009) Metallic materials－Sheet and strip－Determination of plastic strain ratio
KS M ISO 2285:2009 Rubber, vulcanized or thermoplastic-Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
KS M ISO 2285:2014 Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
KS J 0007-2007 Biotechnology－Guidance for the characterization of the genetically modified organism by analysis of the molecular stability of the genomic modification
KS D ISO 209-1-2009 Wrought aluminium and aluminium alloys - Chemical composition and forms of products
KS M ISO 2285-2019 Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

National Standardisation Body (ASRO)

STAS 11200/4-1978 GRAPHICAL SYMBOLS Graphical symbol for variability
STAS 9703-1979 NON-TARNISH GLASSINE
STAS 6631-1985 Knitted goods NON-TEXTURIZED AND TEX- TURIZED POLYAM1DIC YARN SOCKS AND STOCKINGS Sorting requirements
STAS 4942-1988 SCKEWS AND STUDS Variations ol fornis
STAS SR ISO 3763:1976 Wrought steels. Macroscopic methods for assessing the content of non-metallic inclusions
STAS 10209-1978 TEXTURIZED POLYESTERIC FILAMENT YARNS

Netherlands Institute for Standardization

NEN 6702-1991 TGB 1990 LOADINGS AND DEFORMATIONS

American Welding Society (AWS)

AWS WHC1.07-2001 Residual Stress and Distortion
AWS ARE-7-2001 Residual Stress and Distortion
AWS WHC1.07-2001 Residual Stress and Distortion
WRC 149:1970 Control of Distortion and Shrinkage in Welding
WRC 321:1987 The Dynamic Deformation of Piping

International Organization for Standardization (ISO)

ISO/CD 6362-6:2023 Wrought aluminium and aluminium alloys
ISO/DIS 209:2024 Wrought aluminium and aluminium alloys
ISO/DIS 6362-6:2023 Wrought aluminium and aluminium alloys
ISO/CD 209:2023 Wrought aluminium and aluminium alloys
ISO 24344:2008 Resilient floor coverings - Determination of flexibility and deflection
ISO 17695:2004 Footwear - Test methods for uppers - Deformability
ISO 12244:1997 Rubber, vulcanized or thermoplastic - Determination of elongation, creep and tension set at constant load
ISO 3116:2019 Magnesium and magnesium alloys — Wrought magnesium and magnesium alloys
ISO 2285:2007 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

US Federal Contractor Registration (USFCR)

FCR FED BLM 16460-1988 TRANSFORMERS
FCR FED H-08-1 SEC 16321-2005 TRANSFORMERS, PADMOUNTED
FCR COE RPMAS 47230-1978 TRANSFORMERS-DISTRIBUTION
FCR COE EM 1110-2-1009-2002 STRUCTURAL DEFORMATION SURVEYING
FCR FED H-08-1 SEC 16461-2005 TRANSFORMERS (SPECIALTY)
FCR FED FCGS 16321-1986 INTERIOR TRANSFORMERS
FCR FED H-08-1 SEC 16460-2005 TRANSFORMERS (GENERAL PURPOSE)

GM Europe

GME GMI L-7B01D-6-1998 Transmission Deformation (English/German; Includes Appendix 1; ITDC Release, Draft for Harmonization)
GME L-6A02-3-1999 Cylinder Distortion Measurement
GME TM 703300-1987 Karosseriepappe, verformbar Body Cardboard, Deformable German
GME 60232-2007 Force-Deflection Characteristics of Elastomeric Components under Uni-axial Stress (English/German; This specification may be applied only for current projects incl. Global Epsilon ε (37##). It is Superceded for all future projects and replaced by GMW14682
GME 60233-2008 Force-Deflection Characteristics of Elastomeric Components under Bi-axial Stress (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14683)

GM Holden Ltd

HOLDEN HN 0168-1978 Determination of Permanent Set of Elastomers
HOLDEN HN 0168-2013 Determination of Permanent Set of Elastomers
HOLDEN HN 0162-2004 Determination of Compression Set
HOLDEN HN 0162-2013 Determination of Compression Set

Military Standards (MIL-STD)

MIL MIL-T-83720-1968 TRANSFORMERS AND INDUCTORS, NON-EXPLOSIVE, GENERAL SPECIFICATION FOR

The Aluminum Association

AA TEAL-1-2009 International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys

GM North America

GM GM9072P-1989 Methods for Determining Plastic Deformation of Sheet Steel

U.S. Department of Transportation (DOT)

DOT 49 CFR PART 587-2010 DEFORMABLE BARRIERS

GCC Standardization Organization

BH GSO ISO 17695:2024 Footwear-Test methods for uppers- deformability
GSO ISO 13015:2015 Woven fabrics -- Distortion -- Determination of skew and bow
GSO ISO 3116:2008 Magnesium and magnesium alloys - Wrought magnesium alloys

Defense Logistics Agency

DLA MIL-T-83720 VALID NOTICE 4-2011 Transformers and Inductors, Non-Explosive, General Specification for
DLA MIL-PRF-27/361 A-2010 TRANSFORMERS, AUDIO FREQUENCY
DLA MIL-PRF-27/76 D-2009 TRANSFORMERS, AUDIO FREQUENCY
DLA MIL-PRF-27/365 A-2010 TRANSFORMERS, AUDIO FREQUENCY
DLA MIL-T-27/170 C-2012 TRANSFORMERS, AUDIO FREQUENCY
DLA MIL-PRF-27/2 G-2012 TRANSFORMERS, AUDIO FREQUENCY
DLA MIL-PRF-27/79 A-2009 TRANSFORMERS, AUDIO FREQUENCY
DLA MIL-PRF-27/363 A-2010 TRANSFORMERS, AUDIO FREQUENCY
DLA MIL-PRF-27/362 A-2010 TRANSFORMERS, AUDIO FREQUENCY
DLA MIL-PRF-39023D w/Amendment 4-2022 Performance Specification Resistor, Variable, Nonwirewound, Precision General Specification For
DLA A-A-59497/1 A-2010 RESISTORS, VARIABLE, NONWIRE WOUND, NONPRECISION, 1 WATT

Pakistan Standards & Quality Control Authority

PS 1445-1979 SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS

Austrian Standards

ONORM B 3614-1999 Modified bitumen for asphalts with high deformation resistance - Requirements

Standard Association of Australia （SAA）

AS 405:1972 rock deformability
AS 60695.10.3:2006 Fire hazard testing - Abnormal heat - Mould stress relief distortion test

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 13015:2017 Woven fabrics -- Distortion -- Determination of skew and bow

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 13015:2015 Woven fabrics -- Distortion -- Determination of skew and bow
OS GSO ISO 3116:2008 Magnesium and magnesium alloys - Wrought magnesium alloys

Welding Research Council

BULLETIN 149-1970 CONTROL OF DISTORTION AND SHRINKAGE IN WELDING
BULLETIN 321-1987 THE DYNAMIC DEFORMATION OF PIPING

American Water Works Association (AWWA)

AWWA WQTC69477 Characterization of Amoebae and Intra-Amoebal Bacteria in Drinking Water, and Identification of Control Strategies

South African Bureau of Standard

SANS 5900:1983 Warpage and squareness of refractory bricks

National Aeronautics and Space Administration (NASA)

NASA NACA-TN-3288-1954 On the analysis of linear and nonlinear dynamical systems from transient-response data

Yugoslav Association for Standardization

JUS C.K6.033-1982 Prestressing steels. Testing of geometrical properties vvires ban and strands
JUS N.C0.055-1980 Testing of insulated conductors and cables. Hot deformatian
JUS U.E8.018-1981 Determination of representative value of transient deflactin for flexible pavements

Finnish Standards Institute

SFS 3135-1978 plastic pipe. Deformation measurement
SFS 3135-1977 plastic pipe. Deformation measurement

Canadian Standards Association (CSA)

CSA C802.5-16:2016 Guideline for Evaluating the Performance of Dry-Type Transformers Subject to Nonlinear Loads

GM Global

GMW 14735-2012 Determination of the Permanent Set Characteristics of Elastomeric Components Issue 2; English

Comitato Elettrotecnico Italiano

CEI 96-1:1998 Separation transformers, autotransformers, variable transformers and reactors

National Association of Corrosion Engineers (NACE)

NACE Paper 14949-2020 Effect of Hydrogen on Plastic Deformation and Fracture of Austenitic Stainless Steel

Polski Komitet Normalizacyjny (PKN)

PN P55127-1990 Phototypes tting Testing of graphic deformations

Others: denaturing and non-denaturing,Protein denaturation and non-denaturation,denatured and non-denatured proteins,protein denaturing and non-denaturing,denatured and non-transformed