Ring Clamp

Ring Clamp, Total:151 items.

The international standard classification for "Ring Clamp" includes: Dividing and tool-workpiece holding devices , Hand-operated tools , Cutting tools in general , Lathes , Electrical engineering (Vocabularies) .

The Chinese standard classification for "Ring Clamp" includes: Clamping fixtures , Cutting tools , Tools , General grippers .

---

Professional Standard - Aviation

• HB 7149.3-1995 Large Series Combined Clamp Assembly - Cylindrical Positioner
• HB 7032.17-1994 General components of fixture Other parts Metric taper end handle
• HB 7026.2-1994 Interchangeable Parts and Locating Piece of Fixture - Cylinder Positioning Pin
• HB 7028.22-1994 General components of clamps Compression parts Round head tooth surface pressure block
• HB 7029.1-1994 Interchangeable Parts and Fasteners of Fixture - Grooved Round Nut
• HB 4531.1-1991 H-type hole combined fixture system accessory cylindrical pin
• HB 4529.15-1991 Locating Pieces of H-shaped Hole-system Modular Fixture - Locating Circular Rings
• HB 7026.3-1994 Interchangeable Parts and Locating Piece of Fixture - Large Cylindrical Positioning Pin
• HB 7028.21-1994 Interchangeable Parts and Pressure Parts - Roundhead Press Plate
• HB 7028.12-1994 Interchangeable Parts and Pressure Parts - Circular Press Plate
• HB 4529.26-1991 Locating Pieces of H-shaped Hole-system Modular Fixture - Bearing Columns
• HB 7026.9-1994 Interchangeable Parts and Locating Piece of Fixture - Positioning Block of Outer Circle
• HB 7024.3-1994 Substrate of Interchangeable Parts of Fixture - Round Base Plate
• HB 2507-1977 Round clip frame
• HB 7030.13-1994 Interchangeable Parts and Locating Clamping Element - Circular Locating Clamp
• HB 4529.25-1991 H-type hole combination fixture positioning piece support round pad
• HB 7030.14-1994 Fixture universal element positioning clamp large circular positioning clamp
• HB 7026.1-1994 Interchangeable Parts and Locating Piece of Fixture - Small Cylindrical Positioning Pin
• HB 7030.9-1994 Interchangeable Parts and Locating Clamping Element - Reversed Semi-circular Center
• HB 7030.15-1994 Interchangeable Parts and Locating Clamping Element - Large Circular Locating Clamp at Side Direction
• HB 7026.11-1994 Inner circle positioning block for universal component positioning parts of fixtures
• HB 7024.10-1994 Substrate of Interchangeable Parts of Fixture - Lathe Fixture Disc
• HB 7026.10-1994 Interchangeable Parts and Locating Piece of Fixture - Positioning Block of Outer Circle

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 19448.7-2004 Tool holders with cylindrical shank - Part 7:Type F with taper seat
• GB/T 1443-1996 tools - Self-holding tapers for tool shanks
• GB/T　19448.7-2004 Toolholders with cylindrical shanks - Part 7: Type F toolholders for tapered shank tools
• GB/T 19448.7-2004 Tool holders with cylindrical shank - Part 7:Type F with taper seat
• GB/T 1443-2016 Self-holding tapers for machine tools and tool shanks
• GB/T 19448.6-2004 Tool holders with cylindrical shank - Part 6:Type E with cylindrical seat

Professional Standard - Aerospace

• QJ 70A-1997 Parts and Components of Machine Tool Fixture - Taper Shank
• QJ 1145.11-1987 Welding fixture parts and component circular positioning pins
• QJ 796.2A-1997 Machine tool fixture parts and components with adapter plate conical tail handle disc
• QJ 996.11-1986 Auxiliary Tools for Lathe - Round Cutter Holder

未注明发布机构

• SAE AS 21919C-2024 CLAMP, LOOP TYPE, CUSHIONED SUPPORT
• SAE MA14241-2004 CLAMP, LOOP TYPE, CUSHIONED SUPPORT, METRIC
• SAE AS122900 THRU AS122939-2013 CLAMP - LOOP TYPE SUPPORT (HEAT RESISTANT) .204 HOLE

Professional Standard - Military and Civilian Products

• WJ 335-1982 Machine Tool Fixture Parts and Components Cap Round Nuts
• WJ 1548-1984 Jigs for cold processing of optical parts and special crafts
• WJ 1549-1984 Jigs for cold processing of optical parts and special crafts
• WJ 336-1982 Machine Tool Fixture Parts and Components Round Nuts
• WJ 1234-1980 Optical Instrument Assembly General Tool Round Tool Holder

Professional Standard - Machinery

• JB/T 8009.3-1999 The parts and units of jigs and fixtures - Round holddown
• JB/T 8032.2-1999 The parts and units of jigs and fixtures - Cylindrical feeler for tool alignmer
• JB/T 10119-1999 The parts and units of jigs and fixtures - Snap ring
• JB/T 8011.1-1999 The parts and units of jigs and fixtures - Circular eccentric wheel
• JB/T 8031.1-1999 The parts and units of jigs and fixtures - Round tool aligner

未注明发布机构

• SAE AS122900 THRU AS122939-2013 CLAMP - LOOP TYPE SUPPORT (HEAT RESISTANT) .204 HOLE
• SAE AS 21919C-2024 CLAMP, LOOP TYPE, CUSHIONED SUPPORT
• SAE MA14241-2004 CLAMP, LOOP TYPE, CUSHIONED SUPPORT, METRIC

机械电子工业部

• JB/T 5370.3-1991 8mm groove system combination clamp fastener round nut
• JB/T 5368.7-1991 8mm groove system combination clamp positioning piece circular positioning plate
• JB/T 5371.10-1991 8mm groove system combination clamp pressing piece round pressure plate
• JB/T 5371.5-1991 8mm groove system combination clamp pressing piece round pressure plate

机械工业部

• JB/T 6188.19-1992 16mm groove system combination clamp fastener round transition nut

Society of Automotive Engineers (SAE)

• SAE AS85052/4B-2020 CLAMP SUPPORT, LOOP, CLAMP
• SAE AS85052/4A-2015 CLAMP SUPPORT, LOOP, CLAMP
• SAE AS85052/4-2007 CLAMP SUPPORT - LOOP CLAMP
• SAE MA2150/4-2015 CLAMP SUPPORT, LOOP CLAMP, METRIC
• SAE AS5874-2015 CLAMP, LOOP TYPE, CUSHIONED SUPPORT
• SAE AS21919B-2019 CLAMP, LOOP TYPE, CUSHIONED SUPPORT
• SAE AS21919-2015 CLAMP, LOOP TYPE, CUSHIONED SUPPORT
• SAE AS21919A-2017 CLAMP, LOOP TYPE, CUSHIONED SUPPORT
• SAE AS85052-2007 Clamp, Loop, Cushion, General Specification For
• SAE AS41901-3-1992 AS41901 Clamp, Loop, Bonding, Metric
• SAE AS4149-1993 CLAMP, LOOP-CUSHIONED, INTEGRAL LOCK
• SAE AS6298A-2021 CLAMP ASSEMBLY, LOOP, CUSHIONED HINGED
• SAE AS9025-2004 CLAMP - LOOP TYPE SUPPORT (HEAT RESISTANT) .265 HOLE
• SAE AS14244-2012 CLAMP, LOOP TYPE, BONDING METRIC
• SAE AS85052/3B-2020 CLAMP, LOOP, TUBE 17-7 PH CRES, 500 °F
• SAE AS85052/3A-2015 CLAMP, LOOP, TUBE 17-7 PH CRES, 500 °F
• SAE MA14241-2015 CLAMP, LOOP TYPE, CUSHIONED SUPPORT, METRIC
• SAE AS14241-2014 CLAMP, LOOP TYPE, CUSHIONED SUPPORT, METRIC
• SAE AS14487-2005 CLAMP, LOOP, PLASTIC, WIRE SUPPORT, METRIC
• SAE AS85052/3A-2008 Clamp, Loop, Tube 17-7 PH Cres, 500°F
• SAE AS85052/3-2007 CLAMP, LOOP, TUBE 17-7 PH CRES, 500 °F
• SAE AS5587A-2008 Clamp, Loop, Plain, Support, Aircraft
• SAE AS122900A-2023 CLAMP - LOOP TYPE SUPPORT (HEAT RESISTANT) .204 HOLE
• SAE AS122900-2013 CLAMP - LOOP TYPE SUPPORT (HEAT RESISTANT) .204 HOLE
• SAE AS62403-6-1995 AS62403-440 Clamp, Loop Style, Box Cushion, Assembly of
• SAE AS62403-7-2021 AS62403-440 Clamp, Loop Style, Box Cushion, Assembly of
• SAE MA2153/1-2015 CLAMP, LOOP TYPE, BARE METAL, ALUMINUM, METRIC
• SAE AS3257-1999 CLAMP, LOOP-CUSHIONED, CRES, HIGH TEMP., .204 HOLE
• SAE AS3257A-2013 CLAMP, LOOP-CUSHIONED, CRES, HIGH TEMP., .204 HOLE
• SAE AS6298B-2022 CLAMP ASSEMBLY, LOOP, CUSHIONED, HINGED
• SAE AS14487A-2013 Clamp, Loop, Plastic, Wire Support, Metric
• SAE AS1553-1992 PERFORMANCE STANDARD FOR TUBE SUPPORT LOOP-CUSHIONED CLAMP
• SAE AS3257A-2003 (R) CLAMP, LOOP-CUSHIONED, CRES, HIGH TEMP., .204 HOLE
• SAE MA2153/2-2015 CLAMP, LOOP TYPE, BARE METAL, STAINLESS STEEL, METRIC

SAE - SAE International

• SAE AS85052/4A-2008 CLAMP SUPPORT@ LOOP@ CLAMP
• SAE MA2150/4-1991 CLAMP SUPPORT@ LOOP CLAMP@ METRIC
• SAE AS4149A-2000 Clamp@ Loop-Cushioned@ Integral Lock
• SAE AS4149-1988 Clamp@ Loop-Cushioned@ Integral Lock
• SAE AS6298-2015 CLAMP ASSEMBLY@ LOOP@ CUSHIONED HINGED
• SAE AS122900 THRU AS122939-2000 CLAMP - LOOP TYPE SUPPORT (HEAT RESISTANT) .204 HOLE
• SAE MA14241-2000 CLAMP@ LOOP TYPE@ CUSHIONED SUPPORT@ METRIC
• SAE AS14244-1999 Clamp@ Loop Type@ Bonding@ Metric
• SAE AS5587B-2009 CLAMP@ LOOP@ PLAIN@ SUPPORT@ AIRCRAFT
• SAE AS3257-1980 Clamp@ Loop-Cushioned@ CRES@ High Temperature@ .204 Hole (FSC 5340)

PL-PKN

• PN M66221-1986 Press tools Round holders

Indonesia Standards

• SNI 05-3692-1995 Ring for jig and fixture

SE-SIS

• SIS SS 99-1984 Internal self-holding tapers for tool shanks
• SIS SMS 99-1967 Internal self-holding tapers for tool shanks
• SIS SS 312-1988 7/24 tapers for tool shanks
• SIS SS 3509-1985 Pliers and nippers — Round nose pliers with short nose
• SIS SMS 399-1967 Externat self-holding tapers with tapped hole for tool shanks

German Institute for Standardization

• DIN 69881-5:1989 Tool holder with prism; form D with cylindrical seat
• DIN ISO 10889-2:2006 Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs (ISO 10889-2:2004);English version of DIN ISO 10889-2:2006-01

IN-BIS

• IS 11278-1985 Clamp foot specifications with cylindrical shank

British Standards Institution (BSI)

• BS ISO 15637-2:2002 Holding fixtures of cylindrical abrasive sleeves - Holding fixtures for stationary machines
• BS ISO 15637-1:2002 Holding fixtures of cylindrical abrasive sleeves - Holding fixtures with shank for hand-held grinding machines
• BS M 61:1989 Specification for envelope dimensions of "P" clamps (loop clamps) for fluid systems

Association Francaise de Normalisation

• NF E66-550-6:1998 Tool holders with cylindrical shank. Part 6 : type E with cylindrical seat.
• NF E75-090-2*NF ISO 15637-2:2017 Holding fixtures of cylindrical abrasive sleeves - Part 2 : holding fixtures for stationary machines
• NF E66-550-8*NF ISO 10889-8:1998 Tool holders with cylindrical shank. Part 8 : type Z, accessories.
• NF E75-090-1*NF ISO 15637-1:2017 Holding fixtures of cylindrical abrasive sleeves - part 1 : holding fixtures with shank for hand held grinding machines
• NF E66-550-2:1998 Tool holders with cylindrical shank. Part 2 : type A, shanks for tool holders of special designs.
• NF E66-550-7:1998 Tool holders with cylindrical shank. Part 7 : type F with taper seat.

CZ-CSN

• CSN 24 2304-1981 Cylindrical shanks for holders. Essential dimensions

Danish Standards Foundation

• DS/ISO 296:1992 Machine tools. Self-holding tapers for tool shanks

SCC

• SAE AS21919C-2024 CLAMP, LOOP TYPE, CUSHIONED SUPPORT

AIA/NAS - Aerospace Industries Association of America Inc.

• NAS1716-1994 Clamp@ Loop-Cushioned@ Saddle (Rev 2)
• NAS1716-1997 Clamp@ Loop-Cushioned@ Saddle (Rev 3)
• NASM21333-1998 Clamp@ Loop-Steel@ Plain and Cushioned
• NAS1712-1997 Clamp@ Loop-Cushioned@ Rectangular (Rev 5)
• NASM21322-1998 Clamp@ Loop-Aluminum@ Plain and Cushioned
• NAS1712-2008 Clamp@ Loop-Cushioned@ Rectangular (Rev 6)
• NAS1712-1994 Clamp@ Loop-Cushioned@ Rectangular (Rev. 4)

United States Navy

• NAVY QPL-85052-2012 Clamp, Loop, Cushion, General Specification for

RU-GOST R

• GOST 12203-1966 Holding devices. Round blind nuts. Design
• GOST 4739-1968 Ears for machine retaining devices. Design
• GOST 9061-1968 Round eccentric cams for machine retaining devices. Design
• GOST 16888-1971 Knee rack-and-pinion-operated jigs with tapered clamp. Design
• GOST 8926-1968 Cylindrical clearance gauges for machine retaining devices. Design
• GOST 26860-1993 Holders with clamp screw for flatted parallel shank end mills. Dimensions of the driving system of tool shanks
• GOST 12211-1966 Holding devices. Cylindrical locating pins of changeable type. Design
• GOST 13428-1968 Dog point pressure screws for machine retaining devices. Design
• GOST 12209-1966 Holding devices. Cylindrical locating pins of permanent type. Design

HU-MSZT

• MNOSZ 9181-1955 Horse harness accessories. ring
• MNOSZ 17124-1954 Circular tool manufacturing. mineral deposit ring

Defense Logistics Agency

• DLA MS21919 REV E VALID NOTICE 5-2013 Clamp, Loop Type, Cushioned, Support
• DLA MS21122 REV D VALID NOTICE 1-2010 Clamp, Loop, Cushioned, Wedge, Polytetrafluoroethylene

Aerospace Industries Association/ANSI Aerospace Standards

• AIA/NAS NAS1716-2011 CLAMP, LOOP, CUSHIONED, SADDLE Rev 4
• AIA/NAS NAS1716-2014 CLAMP, LOOP, CUSHIONED, SADDLE (Rev 5)
• AIA/NAS NAS 1712-2008 Clamp, Loop-Cushioned, Rectangular Revision 6

International Organization for Standardization (ISO)

• ISO 15637-2:2002 Holding fixtures of cylindrical abrasive sleeves - Part 2: Holding fixtures for stationary machines
• ISO 15637-1:2002 Holding fixtures of cylindrical abrasive sleeves - Part 1: Holding fixtures with shank for hand held grinding machines

Korean Agency for Technology and Standards (KATS)

• KS W ISO 7315-2016 Aerospace－“P”clamps(loop clamps)for fluid systems－Envelope dimensions

GSO

• GSO ISO 7315:2015 Aerospace -- "P" clamps (loop clamps) for fluid systems -- Envelope dimensions
• BH GSO ISO 7315:2017 Aerospace -- "P" clamps (loop clamps) for fluid systems -- Envelope dimensions
• OS GSO ISO 7315:2015 Aerospace -- "P" clamps (loop clamps) for fluid systems -- Envelope dimensions

American National Standards Institute （ANSI)

• ANSI/ASME B5.60b-2009 Workholding Chucks - Jaw Type Chucks

Others: ring chain,Single side fixture,ring,pig ring,Ring Specifications,Ring Specifications,ring diameter,Ring Tolerance,ring size,circle method,circle method,ring m,circovirus,Ring Clamp,ion circle,pig ring,ring size,Ring ruler,rings within rings