Molybdenum heating principle

Molybdenum heating principle, Total:114 items.

The international standard classification for "Molybdenum heating principle" includes: Heat treatment and coating , Lubricants, industrial oils and related products , Non-ferrous metals .

The Chinese standard classification for "Molybdenum heating principle" includes: Hot processing technology , Lubricating oil , Rare refractory metals and their compounds , Medical apparatus and devices in general .

Group Standards of the People's Republic of China

T/GRM 115-2025 Specification for use of underground electric heaters for in-situ pyrolysis of oil-rich coal
T/QGCML 1912-2023 Regenerating hydrogenation catalyst to produce tungsten, molybdenum, copper and zinc raw materials
T/SDHCIA 034-2022 Regenerated tungsten-molybdenum-based hydrogenation catalyst
T/GXAS 542-2023 Technical code of practice for pretreatment of raw materials of preserved mango with original flavor

Professional Standard - Aerospace

QJ 1580-1988 Specification for Heat Treatment of Casting High-coercivity Processable Permanent Magnetic Alloy of Fe-Cr-Co-Mo

Professional Standard - Petrochemical Industry

SH/T 0605-2008 Standard test method for determination of molybdenum in lubricant and additive by atomic absorption spectrometry(AAS)

Professional Standard - Non-ferrous Metal

YS/T 660-2022 Designation and composition of molybdenum and molybdenum alloy wrought product
YS/T 660-2007 Designation and composition of molybdenum and molybdenum alloy wrought product
YS/T 1597-2023 Molybdenum tubes for thermocouple

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/Z 44363-2024 Pyrogenicity—Principles and methods for pyrogen testing of medical devices

Professional Standard - Aviation

HB/Z 316-1998 Neutral Salt Bath for Heating in Heat Treatment

Professional Standard - Machinery

JB/T 6049-1992 Determination of effective heating zone of heat treatment furnace

Yunnan Provincial Standard of the People's Republic of China

DB53/T 1304-2024 Technical regulations for the cultivation of tobacco leaves for heated cigarettes
DB53/T 1307-2024 Technical specification for drying tobacco leaves for heated cigarettes
DB53/T 1308-2024 Technical specification for drying tobacco leaves for heated cigarettes

American Society of Mechanical Engineers (ASME)

ASME SEC VIII D1 MA APP 31-2001 Appendix 31 Rules for Cr-Mo Steels with Additional Requirements for Welding and Heat Treatment

American Society for Testing and Materials (ASTM)

ASTM F79-69(2000) Standard Specification for Type 101 Sealing Glass
ASTM F799-99 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
ASTM F7-95(2000) Standard Specification for Aluminum Oxide Powder
ASTM F79-69(2015) Standard Specification for Type 101 Sealing Glass
ASTM E1184-98 Standard Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis
ASTM ISO/ASTM52900-21 Additive manufacturing — General principles — Fundamentals and vocabulary
ASTM ISO/ASTM 52900-21 Additive manufacturing — General principles — Fundamentals and vocabulary

Society of Automotive Engineers (SAE)

SAE AMS6371-1942 STEEL TUBING (SEAMLESS FOR MACHINED PARTS) Chromium Molybdenum (.27-.33 Carbon) Hot Finish or Cold Finish
SAE AMS6381-1942 STEEL TUBING (SEAMLESS FOR MACHINED PARTS) Chromium Molybdenum (.35 - .45 Carbon) Hot Finish or Cold Finish
SAE AMS6413-1942 STEEL TUBING (SEAMLESS FOR MACHINED PARTS) Nickel Chromium molybdenum (.35-.42 Carbon) Hot Finished and cold Finish
SAE AMS4534C-2013 Copper-Beryllium Alloy, Bars and Rods 98Cu 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)
SAE AMSH6875C Heat Treatment of Steel Raw Materials
SAE AMSH6875A Heat Treatment of Steel Raw Materials
SAE AMS2761 Heat Treatment of Steel Raw Materials
SAE AMSH6875B Heat Treatment of Steel Raw Materials
SAE AMSH6875 Heat Treatment of Steel Raw Materials
SAE AMS-H-6875A-2006 Heat Treatment of Steel Raw Materials
SAE AMS2772D Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2761-2020 Heat Treatment of Steel Raw Materials
SAE AMS-H-6875B-2019 Heat Treatment of Steel Raw Materials
SAE AMS2772E Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772G Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772B Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772C Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772A Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS-H-6875C-2020 Heat Treatment of Steel Raw Materials
SAE AMS2772F Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772H Heat Treatment of Aluminum Alloy Raw Materials
SAE AMSH6875A-1998 Heat Treatment of Steel Raw Materials
SAE AMSH6875B-2019 Heat Treatment of Steel Raw Materials
SAE AMSH6875-1998 Heat Treatment of Steel Raw Materials
SAE AMS2772G-2016 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS-H-6875B-2010 Heat Treatment of Steel Raw Materials
SAE AMS2772D-2007 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772H-2023 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772A-1997 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772E-2008 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772F-2011 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772C-2002 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772B-1999 Heat Treatment of Aluminum Alloy Raw Materials

PL-PKN

PN H97028-1971 Molybdenum Reduced powder

British Standards Institution (BSI)

PD ISO/TR 21582:2021 Pyrogenicity. Principles and methods for pyrogen testing of medical devices
BS HR 404:1973 Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy cold worked solution treated seamless tubes (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
BS 7256:1990 Specification for roomheaters burning wood logs
BS 6880-1:1988 Code of practice for low temperature hot water heating systems of output greater than 45 kW - Fundamental and design considerations

International Organization for Standardization (ISO)

ISO/TR 21582:2021 Pyrogenicity — Principles and methods for pyrogen testing of medical devices
ISO/ASTM 52900:2015 Additive manufacturing - General principles - Terminology
ISO/ASTM 52900:2021 Additive manufacturing — General principles — Fundamentals and vocabulary

GCC Standardization Organization

BH GSO ISO/TR 21582:2024 Pyrogenicity — Principles and methods for pyrogen testing of medical devices

Association Francaise de Normalisation

FD S99-513*FD ISO/TR 21582:2021 Pyrogenicity - Principles and methods for pyrogen testing of medical devices
FD ISO/TR 21582:2021 Pyrogenicity - Principles and test methods for the detection of pyrogens on medical devices
NF EN 835:1995 Heating cost allocators for recording consumption values of heating body surfaces - Devices without electrical energy supply under the evaporation principle

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE FUNDAMENTALS SI CH 8-1993 Physiological Principles and Thermal Comfort
ASHRAE FUNDAMENTALS IP CH 8-1993 Physiological Principles and Thermal Comfort

Danish Standards Foundation

DS/ISO/TR 21582:2021 Pyrogenicity – Principles and methods for pyrogen testing of medical devices
DANSK DS/ISO/TR 21582:2021 Pyrogenicity – Principles and methods for pyrogen testing of medical devices

CZ-CSN

CSN 42 0646 Cast.10-1989 Chemical analysis of non-ferrous metals and alloys. Molybdenum. Determination of nickel by the atomic absorption method
CSN 42 0646 Cast.9-1989 Chemical analysis of non-ferrous metals and alloys. Molybdenum. Determination of sodium by the atomic absorption method
CSN 42 0646 Cast.8-1989 Chemical analysis of non-ferrous metals and alloys. Molybdenum. Determination of magnesium by the atomic absorption method
CSN 42 0646 Cast.7-1989 Chemical analysis of non-ferrous metals and alloys. Molybdenum. Determination of calcium by the atomic absorption method
CSN 42 0641 Cast.23-1986 Chemical analysis of non-ferrous metals and alloys. Nickel alloys. Determination of molybdenum by the atomic absorption method
CSN 42 0646 Cast.4-1989 Chemical analysis of non-ferrous metals and alloys. Molybdenum. Determination of copper by the photometric method and atomic absorption method
CSN 42 0646 Cast.3-1989 Chemical analysis of non-ferrous metals and alloys. Molybdenum. Determination of manganese by the photometric method and atomic absorption methods
CSN 42 0647 Cast.1-1989 Chemical analysis of non-ferrous metals and alloys. Tungsten. Determination of molybdenum by the photometric method and atomic absorption method
CSN 36 1106-1986 Electrically heated furnaces and salt baths for heating and heat treatment of metals. Energy consumption rates
CSN 42 0646 Cast.1-1989 Chemical analysis of non-ferrous metals and alloys. Molybdenum. Determination of iron by the photometric method and atomic absorption methods
CSN 42 0646 Cast.2-1989 Chemical analysis of non-ferrous metals and alloys. Molybdenum. Determination of aluminum by the photometric method and atomic absorption method

German Institute for Standardization

DIN 51006:2023-03 Thermal analysis - Thermogravimetry - Principles / Note: Date of issue 2023-01-27*Intended as replacement for DIN 51006 (2005-07).
DIN 51006 E:2023-03 Draft Document - Thermal analysis - Thermogravimetry - Principles
DIN EN 3465 E:1996-02 Aerospace series - Titanium alloy TI-P63001 - Not heat treated - Grade 2 forging stock, for Solution treated and aged forgings, a or D < 360 mm
DIN 51006:2005-07 Thermal analysis (TA) - Thermogravimetry (TG) - Principles / Note: To be replaced by DIN 51006 (2023-03) (in preparation).
DIN 51006:2024 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
DIN 919-1:2014-08 Technical drawings - Wood processing - Principles
DIN 51006:2024-02 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
DIN 51006 E:2023 Draft Document - Thermal analysis - Thermogravimetry - Principles
DIN 919-1:1991-04 Technical drawings; wood processing; principles
DIN 51007:1994 Thermal analysis; differential thermal analysis; principles
DIN 51007:1994-06 General principles of differential thermal analysis
DIN 24201:1982-05 Industrial furnaces; heating and heat-treating furnaces; concepts
DIN 16960-1:1974-02 Welding of Thermoplastics; Principles
DIN 51006:2005 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
DIN 51006:1990 Thermal analysis (TA) - Thermogravimetry (TG) - Principles

SCC

AFS OS2100 Practical Heat Treating: Basic Principles
AFS BHTPRD Basics of Heat Transfer Principles for Riser Design

Military Standards (MIL-STD)

DOD A-A-54093-1990 HEATER, HEAT TREATMENT PAD
DOD A-A-54371-1991 HEATER, HEAT TREATMENT PAD

WRC - Welding Research Council

BULLETIN 349-1989 POSTWELD HEAT TREATMENT CRACKING IN CHROMIUM-MOLYBDENUM STEELS ; POSTWELD HEAT TREATMENT CRACKING IN HIGH STRENGTH LOW ALLOY STEELS

Japanese Industrial Standards Committee (JISC)

JIS Z 8503:1998 Ergonomic principles related to mental workload -- Design principles

GM Europe

GME QS 104100-1963 Vergtungsstahl Heat Treatable Steel (Formerly Opel 1041)

Magyar Szabványügyi Testület

MNOSZ 4306-1949 Welding Heat Treatment Guidelines

American National Standards Institute （ANSI)

AAMI TIR13-1997 Principles of industrial moist heat sterilization, 1ed
AAMI TIR13:1997 Principles of industrial moist heat sterilization, 1ed

American Petroleum Institute (API)

API RP 2023-2001(2006) Guide for Safe Storage and Handling of Heated Petroleum-Derived Asphalt Products and Crude-Oil Residua
API PUBL 2023-1977 Guide for Safe Storage and Handling of Heated Petroleum-Derived Asphalt Products and Crude-Oil Residua

BR-ABNT

ABNT EB-202-1973 Chromium-molybdenum steel pipes and chromium-molybdenum silicon steel pipes, seamless for heat exchangers

Association of German Mechanical Engineers

VDI 3815-1983 Grundsaetze fuer die Bemessung der Leistung von Waermeerzeugern

Ente Nazionale Italiano di Unificazione

UNI 8542:1983 Plastics. Heated tool welding. General directives.

Others: Heating principle,Molybdenum heating principle,Working principle of molybdenum machinery,Molybdenum heating tape,Molybdenum heating element,Molybdenum heating color,Principle of high frequency heating,Molybdenum heating element